Oracle Cloud Infrastructure v2.17.0, Nov 15 24

Oracle Cloud Infrastructure v2.17.0 published on Friday, Nov 15, 2024 by Pulumi

oci.FileStorage.MountTarget

Explore with Pulumi AI

Oracle Cloud Infrastructure v2.17.0 published on Friday, Nov 15, 2024 by Pulumi

Creates a new mount target in the specified compartment and subnet. You can associate a file system with a mount target only when they exist in the same availability domain. Instances can connect to mount targets in another availablity domain, but you might see higher latency than with instances in the same availability domain as the mount target.

Mount targets have one or more private IP addresses that you can provide as the host portion of remote target parameters in client mount commands. These private IP addresses are listed in the privateIpIds property of the mount target and are highly available. Mount targets also consume additional IP addresses in their subnet. Do not use /30 or smaller subnets for mount target creation because they do not have sufficient available IP addresses. Allow at least three IP addresses for each mount target.

For information about access control and compartments, see Overview of the IAM Service.

For information about availability domains, see Regions and Availability Domains. To get a list of availability domains, use the ListAvailabilityDomains operation in the Identity and Access Management Service API.

All Oracle Cloud Infrastructure Services resources, including mount targets, get an Oracle-assigned, unique ID called an Oracle Cloud Identifier (OCID). When you create a resource, you can find its OCID in the response. You can also retrieve a resource’s OCID by using a List API operation on that resource type, or by viewing the resource in the Console.

Example Usage

import * as pulumi from "@pulumi/pulumi";
import * as oci from "@pulumi/oci";

const testMountTarget = new oci.filestorage.MountTarget("test_mount_target", {
    availabilityDomain: mountTargetAvailabilityDomain,
    compartmentId: compartmentId,
    subnetId: testSubnet.id,
    definedTags: {
        "Operations.CostCenter": "42",
    },
    displayName: mountTargetDisplayName,
    freeformTags: {
        Department: "Finance",
    },
    hostnameLabel: mountTargetHostnameLabel,
    idmapType: mountTargetIdmapType,
    ipAddress: mountTargetIpAddress,
    isLockOverride: mountTargetIsLockOverride,
    kerberos: {
        kerberosRealm: mountTargetKerberosKerberosRealm,
        backupKeyTabSecretVersion: mountTargetKerberosBackupKeyTabSecretVersion,
        currentKeyTabSecretVersion: mountTargetKerberosCurrentKeyTabSecretVersion,
        isKerberosEnabled: mountTargetKerberosIsKerberosEnabled,
        keyTabSecretId: testSecret.id,
    },
    ldapIdmap: {
        cacheLifetimeSeconds: mountTargetLdapIdmapCacheLifetimeSeconds,
        cacheRefreshIntervalSeconds: mountTargetLdapIdmapCacheRefreshIntervalSeconds,
        groupSearchBase: mountTargetLdapIdmapGroupSearchBase,
        negativeCacheLifetimeSeconds: mountTargetLdapIdmapNegativeCacheLifetimeSeconds,
        outboundConnector1id: testOutboundConnector1.id,
        outboundConnector2id: testOutboundConnector2.id,
        schemaType: mountTargetLdapIdmapSchemaType,
        userSearchBase: mountTargetLdapIdmapUserSearchBase,
    },
    locks: [{
        type: mountTargetLocksType,
        message: mountTargetLocksMessage,
        relatedResourceId: testResource.id,
        timeCreated: mountTargetLocksTimeCreated,
    }],
    nsgIds: mountTargetNsgIds,
    requestedThroughput: mountTargetRequestedThroughput,
});

import pulumi
import pulumi_oci as oci

test_mount_target = oci.file_storage.MountTarget("test_mount_target",
    availability_domain=mount_target_availability_domain,
    compartment_id=compartment_id,
    subnet_id=test_subnet["id"],
    defined_tags={
        "Operations.CostCenter": "42",
    },
    display_name=mount_target_display_name,
    freeform_tags={
        "Department": "Finance",
    },
    hostname_label=mount_target_hostname_label,
    idmap_type=mount_target_idmap_type,
    ip_address=mount_target_ip_address,
    is_lock_override=mount_target_is_lock_override,
    kerberos={
        "kerberos_realm": mount_target_kerberos_kerberos_realm,
        "backup_key_tab_secret_version": mount_target_kerberos_backup_key_tab_secret_version,
        "current_key_tab_secret_version": mount_target_kerberos_current_key_tab_secret_version,
        "is_kerberos_enabled": mount_target_kerberos_is_kerberos_enabled,
        "key_tab_secret_id": test_secret["id"],
    },
    ldap_idmap={
        "cache_lifetime_seconds": mount_target_ldap_idmap_cache_lifetime_seconds,
        "cache_refresh_interval_seconds": mount_target_ldap_idmap_cache_refresh_interval_seconds,
        "group_search_base": mount_target_ldap_idmap_group_search_base,
        "negative_cache_lifetime_seconds": mount_target_ldap_idmap_negative_cache_lifetime_seconds,
        "outbound_connector1id": test_outbound_connector1["id"],
        "outbound_connector2id": test_outbound_connector2["id"],
        "schema_type": mount_target_ldap_idmap_schema_type,
        "user_search_base": mount_target_ldap_idmap_user_search_base,
    },
    locks=[{
        "type": mount_target_locks_type,
        "message": mount_target_locks_message,
        "related_resource_id": test_resource["id"],
        "time_created": mount_target_locks_time_created,
    }],
    nsg_ids=mount_target_nsg_ids,
    requested_throughput=mount_target_requested_throughput)

package main

import (
	"github.com/pulumi/pulumi-oci/sdk/v2/go/oci/FileStorage"
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := FileStorage.NewMountTarget(ctx, "test_mount_target", &FileStorage.MountTargetArgs{
			AvailabilityDomain: pulumi.Any(mountTargetAvailabilityDomain),
			CompartmentId:      pulumi.Any(compartmentId),
			SubnetId:           pulumi.Any(testSubnet.Id),
			DefinedTags: pulumi.StringMap{
				"Operations.CostCenter": pulumi.String("42"),
			},
			DisplayName: pulumi.Any(mountTargetDisplayName),
			FreeformTags: pulumi.StringMap{
				"Department": pulumi.String("Finance"),
			},
			HostnameLabel:  pulumi.Any(mountTargetHostnameLabel),
			IdmapType:      pulumi.Any(mountTargetIdmapType),
			IpAddress:      pulumi.Any(mountTargetIpAddress),
			IsLockOverride: pulumi.Any(mountTargetIsLockOverride),
			Kerberos: &filestorage.MountTargetKerberosArgs{
				KerberosRealm:              pulumi.Any(mountTargetKerberosKerberosRealm),
				BackupKeyTabSecretVersion:  pulumi.Any(mountTargetKerberosBackupKeyTabSecretVersion),
				CurrentKeyTabSecretVersion: pulumi.Any(mountTargetKerberosCurrentKeyTabSecretVersion),
				IsKerberosEnabled:          pulumi.Any(mountTargetKerberosIsKerberosEnabled),
				KeyTabSecretId:             pulumi.Any(testSecret.Id),
			},
			LdapIdmap: &filestorage.MountTargetLdapIdmapArgs{
				CacheLifetimeSeconds:         pulumi.Any(mountTargetLdapIdmapCacheLifetimeSeconds),
				CacheRefreshIntervalSeconds:  pulumi.Any(mountTargetLdapIdmapCacheRefreshIntervalSeconds),
				GroupSearchBase:              pulumi.Any(mountTargetLdapIdmapGroupSearchBase),
				NegativeCacheLifetimeSeconds: pulumi.Any(mountTargetLdapIdmapNegativeCacheLifetimeSeconds),
				OutboundConnector1id:         pulumi.Any(testOutboundConnector1.Id),
				OutboundConnector2id:         pulumi.Any(testOutboundConnector2.Id),
				SchemaType:                   pulumi.Any(mountTargetLdapIdmapSchemaType),
				UserSearchBase:               pulumi.Any(mountTargetLdapIdmapUserSearchBase),
			},
			Locks: filestorage.MountTargetLockArray{
				&filestorage.MountTargetLockArgs{
					Type:              pulumi.Any(mountTargetLocksType),
					Message:           pulumi.Any(mountTargetLocksMessage),
					RelatedResourceId: pulumi.Any(testResource.Id),
					TimeCreated:       pulumi.Any(mountTargetLocksTimeCreated),
				},
			},
			NsgIds:              pulumi.Any(mountTargetNsgIds),
			RequestedThroughput: pulumi.Any(mountTargetRequestedThroughput),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Oci = Pulumi.Oci;

return await Deployment.RunAsync(() => 
{
    var testMountTarget = new Oci.FileStorage.MountTarget("test_mount_target", new()
    {
        AvailabilityDomain = mountTargetAvailabilityDomain,
        CompartmentId = compartmentId,
        SubnetId = testSubnet.Id,
        DefinedTags = 
        {
            { "Operations.CostCenter", "42" },
        },
        DisplayName = mountTargetDisplayName,
        FreeformTags = 
        {
            { "Department", "Finance" },
        },
        HostnameLabel = mountTargetHostnameLabel,
        IdmapType = mountTargetIdmapType,
        IpAddress = mountTargetIpAddress,
        IsLockOverride = mountTargetIsLockOverride,
        Kerberos = new Oci.FileStorage.Inputs.MountTargetKerberosArgs
        {
            KerberosRealm = mountTargetKerberosKerberosRealm,
            BackupKeyTabSecretVersion = mountTargetKerberosBackupKeyTabSecretVersion,
            CurrentKeyTabSecretVersion = mountTargetKerberosCurrentKeyTabSecretVersion,
            IsKerberosEnabled = mountTargetKerberosIsKerberosEnabled,
            KeyTabSecretId = testSecret.Id,
        },
        LdapIdmap = new Oci.FileStorage.Inputs.MountTargetLdapIdmapArgs
        {
            CacheLifetimeSeconds = mountTargetLdapIdmapCacheLifetimeSeconds,
            CacheRefreshIntervalSeconds = mountTargetLdapIdmapCacheRefreshIntervalSeconds,
            GroupSearchBase = mountTargetLdapIdmapGroupSearchBase,
            NegativeCacheLifetimeSeconds = mountTargetLdapIdmapNegativeCacheLifetimeSeconds,
            OutboundConnector1id = testOutboundConnector1.Id,
            OutboundConnector2id = testOutboundConnector2.Id,
            SchemaType = mountTargetLdapIdmapSchemaType,
            UserSearchBase = mountTargetLdapIdmapUserSearchBase,
        },
        Locks = new[]
        {
            new Oci.FileStorage.Inputs.MountTargetLockArgs
            {
                Type = mountTargetLocksType,
                Message = mountTargetLocksMessage,
                RelatedResourceId = testResource.Id,
                TimeCreated = mountTargetLocksTimeCreated,
            },
        },
        NsgIds = mountTargetNsgIds,
        RequestedThroughput = mountTargetRequestedThroughput,
    });

});

package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.oci.FileStorage.MountTarget;
import com.pulumi.oci.FileStorage.MountTargetArgs;
import com.pulumi.oci.FileStorage.inputs.MountTargetKerberosArgs;
import com.pulumi.oci.FileStorage.inputs.MountTargetLdapIdmapArgs;
import com.pulumi.oci.FileStorage.inputs.MountTargetLockArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
        var testMountTarget = new MountTarget("testMountTarget", MountTargetArgs.builder()
            .availabilityDomain(mountTargetAvailabilityDomain)
            .compartmentId(compartmentId)
            .subnetId(testSubnet.id())
            .definedTags(Map.of("Operations.CostCenter", "42"))
            .displayName(mountTargetDisplayName)
            .freeformTags(Map.of("Department", "Finance"))
            .hostnameLabel(mountTargetHostnameLabel)
            .idmapType(mountTargetIdmapType)
            .ipAddress(mountTargetIpAddress)
            .isLockOverride(mountTargetIsLockOverride)
            .kerberos(MountTargetKerberosArgs.builder()
                .kerberosRealm(mountTargetKerberosKerberosRealm)
                .backupKeyTabSecretVersion(mountTargetKerberosBackupKeyTabSecretVersion)
                .currentKeyTabSecretVersion(mountTargetKerberosCurrentKeyTabSecretVersion)
                .isKerberosEnabled(mountTargetKerberosIsKerberosEnabled)
                .keyTabSecretId(testSecret.id())
                .build())
            .ldapIdmap(MountTargetLdapIdmapArgs.builder()
                .cacheLifetimeSeconds(mountTargetLdapIdmapCacheLifetimeSeconds)
                .cacheRefreshIntervalSeconds(mountTargetLdapIdmapCacheRefreshIntervalSeconds)
                .groupSearchBase(mountTargetLdapIdmapGroupSearchBase)
                .negativeCacheLifetimeSeconds(mountTargetLdapIdmapNegativeCacheLifetimeSeconds)
                .outboundConnector1id(testOutboundConnector1.id())
                .outboundConnector2id(testOutboundConnector2.id())
                .schemaType(mountTargetLdapIdmapSchemaType)
                .userSearchBase(mountTargetLdapIdmapUserSearchBase)
                .build())
            .locks(MountTargetLockArgs.builder()
                .type(mountTargetLocksType)
                .message(mountTargetLocksMessage)
                .relatedResourceId(testResource.id())
                .timeCreated(mountTargetLocksTimeCreated)
                .build())
            .nsgIds(mountTargetNsgIds)
            .requestedThroughput(mountTargetRequestedThroughput)
            .build());

    }
}

resources:
  testMountTarget:
    type: oci:FileStorage:MountTarget
    name: test_mount_target
    properties:
      availabilityDomain: ${mountTargetAvailabilityDomain}
      compartmentId: ${compartmentId}
      subnetId: ${testSubnet.id}
      definedTags:
        Operations.CostCenter: '42'
      displayName: ${mountTargetDisplayName}
      freeformTags:
        Department: Finance
      hostnameLabel: ${mountTargetHostnameLabel}
      idmapType: ${mountTargetIdmapType}
      ipAddress: ${mountTargetIpAddress}
      isLockOverride: ${mountTargetIsLockOverride}
      kerberos:
        kerberosRealm: ${mountTargetKerberosKerberosRealm}
        backupKeyTabSecretVersion: ${mountTargetKerberosBackupKeyTabSecretVersion}
        currentKeyTabSecretVersion: ${mountTargetKerberosCurrentKeyTabSecretVersion}
        isKerberosEnabled: ${mountTargetKerberosIsKerberosEnabled}
        keyTabSecretId: ${testSecret.id}
      ldapIdmap:
        cacheLifetimeSeconds: ${mountTargetLdapIdmapCacheLifetimeSeconds}
        cacheRefreshIntervalSeconds: ${mountTargetLdapIdmapCacheRefreshIntervalSeconds}
        groupSearchBase: ${mountTargetLdapIdmapGroupSearchBase}
        negativeCacheLifetimeSeconds: ${mountTargetLdapIdmapNegativeCacheLifetimeSeconds}
        outboundConnector1id: ${testOutboundConnector1.id}
        outboundConnector2id: ${testOutboundConnector2.id}
        schemaType: ${mountTargetLdapIdmapSchemaType}
        userSearchBase: ${mountTargetLdapIdmapUserSearchBase}
      locks:
        - type: ${mountTargetLocksType}
          message: ${mountTargetLocksMessage}
          relatedResourceId: ${testResource.id}
          timeCreated: ${mountTargetLocksTimeCreated}
      nsgIds: ${mountTargetNsgIds}
      requestedThroughput: ${mountTargetRequestedThroughput}

Create MountTarget Resource

Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

Constructor syntax

new MountTarget(name: string, args: MountTargetArgs, opts?: CustomResourceOptions);

@overload
def MountTarget(resource_name: str,
                args: MountTargetArgs,
                opts: Optional[ResourceOptions] = None)

@overload
def MountTarget(resource_name: str,
                opts: Optional[ResourceOptions] = None,
                availability_domain: Optional[str] = None,
                compartment_id: Optional[str] = None,
                subnet_id: Optional[str] = None,
                idmap_type: Optional[str] = None,
                freeform_tags: Optional[Mapping[str, str]] = None,
                hostname_label: Optional[str] = None,
                display_name: Optional[str] = None,
                ip_address: Optional[str] = None,
                is_lock_override: Optional[bool] = None,
                kerberos: Optional[_filestorage.MountTargetKerberosArgs] = None,
                ldap_idmap: Optional[_filestorage.MountTargetLdapIdmapArgs] = None,
                locks: Optional[Sequence[_filestorage.MountTargetLockArgs]] = None,
                nsg_ids: Optional[Sequence[str]] = None,
                requested_throughput: Optional[str] = None,
                defined_tags: Optional[Mapping[str, str]] = None)

func NewMountTarget(ctx *Context, name string, args MountTargetArgs, opts ...ResourceOption) (*MountTarget, error)

public MountTarget(string name, MountTargetArgs args, CustomResourceOptions? opts = null)

public MountTarget(String name, MountTargetArgs args)
public MountTarget(String name, MountTargetArgs args, CustomResourceOptions options)

type: oci:FileStorage:MountTarget
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

Parameters

name string: The unique name of the resource.
args MountTargetArgs: The arguments to resource properties.
opts CustomResourceOptions: Bag of options to control resource's behavior.

resource_name str: The unique name of the resource.
args MountTargetArgs: The arguments to resource properties.
opts ResourceOptions: Bag of options to control resource's behavior.

ctx Context: Context object for the current deployment.
name string: The unique name of the resource.
args MountTargetArgs: The arguments to resource properties.
opts ResourceOption: Bag of options to control resource's behavior.

name string: The unique name of the resource.
args MountTargetArgs: The arguments to resource properties.
opts CustomResourceOptions: Bag of options to control resource's behavior.

name String: The unique name of the resource.
args MountTargetArgs: The arguments to resource properties.
options CustomResourceOptions: Bag of options to control resource's behavior.

Constructor example

The following reference example uses placeholder values for all input properties.

var mountTargetResource = new Oci.FileStorage.MountTarget("mountTargetResource", new()
{
    AvailabilityDomain = "string",
    CompartmentId = "string",
    SubnetId = "string",
    IdmapType = "string",
    FreeformTags = 
    {
        { "string", "string" },
    },
    HostnameLabel = "string",
    DisplayName = "string",
    IpAddress = "string",
    IsLockOverride = false,
    Kerberos = new Oci.FileStorage.Inputs.MountTargetKerberosArgs
    {
        KerberosRealm = "string",
        BackupKeyTabSecretVersion = 0,
        CurrentKeyTabSecretVersion = 0,
        IsKerberosEnabled = false,
        KeyTabSecretId = "string",
    },
    LdapIdmap = new Oci.FileStorage.Inputs.MountTargetLdapIdmapArgs
    {
        CacheLifetimeSeconds = 0,
        CacheRefreshIntervalSeconds = 0,
        GroupSearchBase = "string",
        NegativeCacheLifetimeSeconds = 0,
        OutboundConnector1id = "string",
        OutboundConnector2id = "string",
        SchemaType = "string",
        UserSearchBase = "string",
    },
    Locks = new[]
    {
        new Oci.FileStorage.Inputs.MountTargetLockArgs
        {
            Type = "string",
            Message = "string",
            RelatedResourceId = "string",
            TimeCreated = "string",
        },
    },
    NsgIds = new[]
    {
        "string",
    },
    RequestedThroughput = "string",
    DefinedTags = 
    {
        { "string", "string" },
    },
});

example, err := FileStorage.NewMountTarget(ctx, "mountTargetResource", &FileStorage.MountTargetArgs{
	AvailabilityDomain: pulumi.String("string"),
	CompartmentId:      pulumi.String("string"),
	SubnetId:           pulumi.String("string"),
	IdmapType:          pulumi.String("string"),
	FreeformTags: pulumi.StringMap{
		"string": pulumi.String("string"),
	},
	HostnameLabel:  pulumi.String("string"),
	DisplayName:    pulumi.String("string"),
	IpAddress:      pulumi.String("string"),
	IsLockOverride: pulumi.Bool(false),
	Kerberos: &filestorage.MountTargetKerberosArgs{
		KerberosRealm:              pulumi.String("string"),
		BackupKeyTabSecretVersion:  pulumi.Int(0),
		CurrentKeyTabSecretVersion: pulumi.Int(0),
		IsKerberosEnabled:          pulumi.Bool(false),
		KeyTabSecretId:             pulumi.String("string"),
	},
	LdapIdmap: &filestorage.MountTargetLdapIdmapArgs{
		CacheLifetimeSeconds:         pulumi.Int(0),
		CacheRefreshIntervalSeconds:  pulumi.Int(0),
		GroupSearchBase:              pulumi.String("string"),
		NegativeCacheLifetimeSeconds: pulumi.Int(0),
		OutboundConnector1id:         pulumi.String("string"),
		OutboundConnector2id:         pulumi.String("string"),
		SchemaType:                   pulumi.String("string"),
		UserSearchBase:               pulumi.String("string"),
	},
	Locks: filestorage.MountTargetLockArray{
		&filestorage.MountTargetLockArgs{
			Type:              pulumi.String("string"),
			Message:           pulumi.String("string"),
			RelatedResourceId: pulumi.String("string"),
			TimeCreated:       pulumi.String("string"),
		},
	},
	NsgIds: pulumi.StringArray{
		pulumi.String("string"),
	},
	RequestedThroughput: pulumi.String("string"),
	DefinedTags: pulumi.StringMap{
		"string": pulumi.String("string"),
	},
})

var mountTargetResource = new MountTarget("mountTargetResource", MountTargetArgs.builder()
    .availabilityDomain("string")
    .compartmentId("string")
    .subnetId("string")
    .idmapType("string")
    .freeformTags(Map.of("string", "string"))
    .hostnameLabel("string")
    .displayName("string")
    .ipAddress("string")
    .isLockOverride(false)
    .kerberos(MountTargetKerberosArgs.builder()
        .kerberosRealm("string")
        .backupKeyTabSecretVersion(0)
        .currentKeyTabSecretVersion(0)
        .isKerberosEnabled(false)
        .keyTabSecretId("string")
        .build())
    .ldapIdmap(MountTargetLdapIdmapArgs.builder()
        .cacheLifetimeSeconds(0)
        .cacheRefreshIntervalSeconds(0)
        .groupSearchBase("string")
        .negativeCacheLifetimeSeconds(0)
        .outboundConnector1id("string")
        .outboundConnector2id("string")
        .schemaType("string")
        .userSearchBase("string")
        .build())
    .locks(MountTargetLockArgs.builder()
        .type("string")
        .message("string")
        .relatedResourceId("string")
        .timeCreated("string")
        .build())
    .nsgIds("string")
    .requestedThroughput("string")
    .definedTags(Map.of("string", "string"))
    .build());

mount_target_resource = oci.file_storage.MountTarget("mountTargetResource",
    availability_domain="string",
    compartment_id="string",
    subnet_id="string",
    idmap_type="string",
    freeform_tags={
        "string": "string",
    },
    hostname_label="string",
    display_name="string",
    ip_address="string",
    is_lock_override=False,
    kerberos={
        "kerberos_realm": "string",
        "backup_key_tab_secret_version": 0,
        "current_key_tab_secret_version": 0,
        "is_kerberos_enabled": False,
        "key_tab_secret_id": "string",
    },
    ldap_idmap={
        "cache_lifetime_seconds": 0,
        "cache_refresh_interval_seconds": 0,
        "group_search_base": "string",
        "negative_cache_lifetime_seconds": 0,
        "outbound_connector1id": "string",
        "outbound_connector2id": "string",
        "schema_type": "string",
        "user_search_base": "string",
    },
    locks=[{
        "type": "string",
        "message": "string",
        "related_resource_id": "string",
        "time_created": "string",
    }],
    nsg_ids=["string"],
    requested_throughput="string",
    defined_tags={
        "string": "string",
    })

const mountTargetResource = new oci.filestorage.MountTarget("mountTargetResource", {
    availabilityDomain: "string",
    compartmentId: "string",
    subnetId: "string",
    idmapType: "string",
    freeformTags: {
        string: "string",
    },
    hostnameLabel: "string",
    displayName: "string",
    ipAddress: "string",
    isLockOverride: false,
    kerberos: {
        kerberosRealm: "string",
        backupKeyTabSecretVersion: 0,
        currentKeyTabSecretVersion: 0,
        isKerberosEnabled: false,
        keyTabSecretId: "string",
    },
    ldapIdmap: {
        cacheLifetimeSeconds: 0,
        cacheRefreshIntervalSeconds: 0,
        groupSearchBase: "string",
        negativeCacheLifetimeSeconds: 0,
        outboundConnector1id: "string",
        outboundConnector2id: "string",
        schemaType: "string",
        userSearchBase: "string",
    },
    locks: [{
        type: "string",
        message: "string",
        relatedResourceId: "string",
        timeCreated: "string",
    }],
    nsgIds: ["string"],
    requestedThroughput: "string",
    definedTags: {
        string: "string",
    },
});

type: oci:FileStorage:MountTarget
properties:
    availabilityDomain: string
    compartmentId: string
    definedTags:
        string: string
    displayName: string
    freeformTags:
        string: string
    hostnameLabel: string
    idmapType: string
    ipAddress: string
    isLockOverride: false
    kerberos:
        backupKeyTabSecretVersion: 0
        currentKeyTabSecretVersion: 0
        isKerberosEnabled: false
        kerberosRealm: string
        keyTabSecretId: string
    ldapIdmap:
        cacheLifetimeSeconds: 0
        cacheRefreshIntervalSeconds: 0
        groupSearchBase: string
        negativeCacheLifetimeSeconds: 0
        outboundConnector1id: string
        outboundConnector2id: string
        schemaType: string
        userSearchBase: string
    locks:
        - message: string
          relatedResourceId: string
          timeCreated: string
          type: string
    nsgIds:
        - string
    requestedThroughput: string
    subnetId: string

MountTarget Resource Properties

To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

Inputs

In Python, inputs that are objects can be passed either as argument classes or as dictionary literals.

The MountTarget resource accepts the following input properties:

AvailabilityDomain string

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

CompartmentId string

(Updatable) The OCID of the compartment in which to create the mount target.

SubnetId string

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

DefinedTags Dictionary<string, string>

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

DisplayName string

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

FreeformTags Dictionary<string, string>

(Updatable) Free-form tags for this resource. Each tag is a simple key-value pair with no predefined name, type, or namespace. For more information, see Resource Tags. Example: {"Department": "Finance"}

HostnameLabel string

The hostname for the mount target's IP address, used for DNS resolution. The value is the hostname portion of the private IP address's fully qualified domain name (FQDN). For example, files-1 in the FQDN files-1.subnet123.vcn1.oraclevcn.com. Must be unique across all VNICs in the subnet and comply with RFC 952 and RFC 1123.

Note: This attribute value is stored in the PrivateIp resource, not in the mountTarget resource. To update the hostnameLabel, use GetMountTarget to obtain the OCIDs of the mount target's private IPs (privateIpIds). Then, you can use UpdatePrivateIp to update the hostnameLabel value.

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

IdmapType string

(Updatable) The method used to map a Unix UID to secondary groups, if any.

IpAddress string

A private IP address of your choice. Must be an available IP address within the subnet's CIDR. If you don't specify a value, Oracle automatically assigns a private IP address from the subnet. Example: 10.0.3.3

IsLockOverride bool

(Updatable) Whether to override locks (if any exist).

Kerberos MountTargetKerberos

(Updatable) Kerberos details needed to create configuration.

LdapIdmap MountTargetLdapIdmap

(Updatable) Mount target details about the LDAP ID mapping configuration.

Locks List<MountTargetLock>

Locks associated with this resource.

NsgIds List<string>

(Updatable) A list of Network Security Group OCIDs associated with this mount target. A maximum of 5 is allowed. Setting this to an empty array after the list is created removes the mount target from all NSGs. For more information about NSGs, see Security Rules.

RequestedThroughput string

(Updatable) Throughput for mount target in Gbps. Currently only 1 Gbps of requestedThroughput is supported during create MountTarget. Available shapes and corresponding throughput are listed at Mount Target Performance.

AvailabilityDomain string

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

CompartmentId string

(Updatable) The OCID of the compartment in which to create the mount target.

SubnetId string

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

DefinedTags map[string]string

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

DisplayName string

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

FreeformTags map[string]string

HostnameLabel string

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

IdmapType string

(Updatable) The method used to map a Unix UID to secondary groups, if any.

IpAddress string

IsLockOverride bool

(Updatable) Whether to override locks (if any exist).

Kerberos MountTargetKerberosArgs

(Updatable) Kerberos details needed to create configuration.

LdapIdmap MountTargetLdapIdmapArgs

(Updatable) Mount target details about the LDAP ID mapping configuration.

Locks []MountTargetLockArgs

Locks associated with this resource.

NsgIds []string

RequestedThroughput string

availabilityDomain String

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

compartmentId String

(Updatable) The OCID of the compartment in which to create the mount target.

subnetId String

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

definedTags Map<String,String>

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

displayName String

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

freeformTags Map<String,String>

hostnameLabel String

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

idmapType String

(Updatable) The method used to map a Unix UID to secondary groups, if any.

ipAddress String

isLockOverride Boolean

(Updatable) Whether to override locks (if any exist).

kerberos MountTargetKerberos

(Updatable) Kerberos details needed to create configuration.

ldapIdmap MountTargetLdapIdmap

(Updatable) Mount target details about the LDAP ID mapping configuration.

locks List<MountTargetLock>

Locks associated with this resource.

nsgIds List<String>

requestedThroughput String

availabilityDomain string

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

compartmentId string

(Updatable) The OCID of the compartment in which to create the mount target.

subnetId string

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

definedTags {[key: string]: string}

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

displayName string

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

freeformTags {[key: string]: string}

hostnameLabel string

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

idmapType string

(Updatable) The method used to map a Unix UID to secondary groups, if any.

ipAddress string

isLockOverride boolean

(Updatable) Whether to override locks (if any exist).

kerberos MountTargetKerberos

(Updatable) Kerberos details needed to create configuration.

ldapIdmap MountTargetLdapIdmap

(Updatable) Mount target details about the LDAP ID mapping configuration.

locks MountTargetLock[]

Locks associated with this resource.

nsgIds string[]

requestedThroughput string

availability_domain str

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

compartment_id str

(Updatable) The OCID of the compartment in which to create the mount target.

subnet_id str

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

defined_tags Mapping[str, str]

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

display_name str

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

freeform_tags Mapping[str, str]

hostname_label str

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

idmap_type str

(Updatable) The method used to map a Unix UID to secondary groups, if any.

ip_address str

is_lock_override bool

(Updatable) Whether to override locks (if any exist).

kerberos filestorage.MountTargetKerberosArgs

(Updatable) Kerberos details needed to create configuration.

ldap_idmap filestorage.MountTargetLdapIdmapArgs

(Updatable) Mount target details about the LDAP ID mapping configuration.

locks Sequence[filestorage.MountTargetLockArgs]

Locks associated with this resource.

nsg_ids Sequence[str]

requested_throughput str

availabilityDomain String

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

compartmentId String

(Updatable) The OCID of the compartment in which to create the mount target.

subnetId String

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

definedTags Map<String>

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

displayName String

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

freeformTags Map<String>

hostnameLabel String

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

idmapType String

(Updatable) The method used to map a Unix UID to secondary groups, if any.

ipAddress String

isLockOverride Boolean

(Updatable) Whether to override locks (if any exist).

kerberos Property Map

(Updatable) Kerberos details needed to create configuration.

ldapIdmap Property Map

(Updatable) Mount target details about the LDAP ID mapping configuration.

locks List<Property Map>

Locks associated with this resource.

nsgIds List<String>

requestedThroughput String

Outputs

All input properties are implicitly available as output properties. Additionally, the MountTarget resource produces the following output properties:

ExportSetId string

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

Id string

The provider-assigned unique ID for this managed resource.

LifecycleDetails string

Additional information about the current 'lifecycleState'.

ObservedThroughput string

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

PrivateIpIds List<string>

The OCIDs of the private IP addresses associated with this mount target.

ReservedStorageCapacity string

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

State string

The current state of the mount target.

TimeBillingCycleEnd string

The date and time the mount target current billing cycle will end, expressed in RFC 3339 timestamp format. Once a cycle ends, it is updated automatically to next timestamp which is after 30 days. Example: 2016-08-25T21:10:29.600Z

TimeCreated string

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

ExportSetId string

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

Id string

The provider-assigned unique ID for this managed resource.

LifecycleDetails string

Additional information about the current 'lifecycleState'.

ObservedThroughput string

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

PrivateIpIds []string

The OCIDs of the private IP addresses associated with this mount target.

ReservedStorageCapacity string

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

State string

The current state of the mount target.

TimeBillingCycleEnd string

TimeCreated string

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

exportSetId String

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

id String

The provider-assigned unique ID for this managed resource.

lifecycleDetails String

Additional information about the current 'lifecycleState'.

observedThroughput String

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

privateIpIds List<String>

The OCIDs of the private IP addresses associated with this mount target.

reservedStorageCapacity String

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

state String

The current state of the mount target.

timeBillingCycleEnd String

timeCreated String

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

exportSetId string

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

id string

The provider-assigned unique ID for this managed resource.

lifecycleDetails string

Additional information about the current 'lifecycleState'.

observedThroughput string

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

privateIpIds string[]

The OCIDs of the private IP addresses associated with this mount target.

reservedStorageCapacity string

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

state string

The current state of the mount target.

timeBillingCycleEnd string

timeCreated string

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

export_set_id str

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

id str

The provider-assigned unique ID for this managed resource.

lifecycle_details str

Additional information about the current 'lifecycleState'.

observed_throughput str

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

private_ip_ids Sequence[str]

The OCIDs of the private IP addresses associated with this mount target.

reserved_storage_capacity str

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

state str

The current state of the mount target.

time_billing_cycle_end str

time_created str

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

exportSetId String

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

id String

The provider-assigned unique ID for this managed resource.

lifecycleDetails String

Additional information about the current 'lifecycleState'.

observedThroughput String

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

privateIpIds List<String>

The OCIDs of the private IP addresses associated with this mount target.

reservedStorageCapacity String

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

state String

The current state of the mount target.

timeBillingCycleEnd String

timeCreated String

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

Look up Existing MountTarget Resource

Get an existing MountTarget resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

public static get(name: string, id: Input<ID>, state?: MountTargetState, opts?: CustomResourceOptions): MountTarget

@staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        availability_domain: Optional[str] = None,
        compartment_id: Optional[str] = None,
        defined_tags: Optional[Mapping[str, str]] = None,
        display_name: Optional[str] = None,
        export_set_id: Optional[str] = None,
        freeform_tags: Optional[Mapping[str, str]] = None,
        hostname_label: Optional[str] = None,
        idmap_type: Optional[str] = None,
        ip_address: Optional[str] = None,
        is_lock_override: Optional[bool] = None,
        kerberos: Optional[_filestorage.MountTargetKerberosArgs] = None,
        ldap_idmap: Optional[_filestorage.MountTargetLdapIdmapArgs] = None,
        lifecycle_details: Optional[str] = None,
        locks: Optional[Sequence[_filestorage.MountTargetLockArgs]] = None,
        nsg_ids: Optional[Sequence[str]] = None,
        observed_throughput: Optional[str] = None,
        private_ip_ids: Optional[Sequence[str]] = None,
        requested_throughput: Optional[str] = None,
        reserved_storage_capacity: Optional[str] = None,
        state: Optional[str] = None,
        subnet_id: Optional[str] = None,
        time_billing_cycle_end: Optional[str] = None,
        time_created: Optional[str] = None) -> MountTarget

func GetMountTarget(ctx *Context, name string, id IDInput, state *MountTargetState, opts ...ResourceOption) (*MountTarget, error)

public static MountTarget Get(string name, Input<string> id, MountTargetState? state, CustomResourceOptions? opts = null)

public static MountTarget get(String name, Output<String> id, MountTargetState state, CustomResourceOptions options)

Resource lookup is not supported in YAML

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

resource_name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

The following state arguments are supported:

AvailabilityDomain string

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

CompartmentId string

(Updatable) The OCID of the compartment in which to create the mount target.

DefinedTags Dictionary<string, string>

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

DisplayName string

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

ExportSetId string

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

FreeformTags Dictionary<string, string>

HostnameLabel string

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

IdmapType string

(Updatable) The method used to map a Unix UID to secondary groups, if any.

IpAddress string

IsLockOverride bool

(Updatable) Whether to override locks (if any exist).

Kerberos MountTargetKerberos

(Updatable) Kerberos details needed to create configuration.

LdapIdmap MountTargetLdapIdmap

(Updatable) Mount target details about the LDAP ID mapping configuration.

LifecycleDetails string

Additional information about the current 'lifecycleState'.

Locks List<MountTargetLock>

Locks associated with this resource.

NsgIds List<string>

ObservedThroughput string

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

PrivateIpIds List<string>

The OCIDs of the private IP addresses associated with this mount target.

RequestedThroughput string

ReservedStorageCapacity string

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

State string

The current state of the mount target.

SubnetId string

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

TimeBillingCycleEnd string

TimeCreated string

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

AvailabilityDomain string

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

CompartmentId string

(Updatable) The OCID of the compartment in which to create the mount target.

DefinedTags map[string]string

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

DisplayName string

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

ExportSetId string

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

FreeformTags map[string]string

HostnameLabel string

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

IdmapType string

(Updatable) The method used to map a Unix UID to secondary groups, if any.

IpAddress string

IsLockOverride bool

(Updatable) Whether to override locks (if any exist).

Kerberos MountTargetKerberosArgs

(Updatable) Kerberos details needed to create configuration.

LdapIdmap MountTargetLdapIdmapArgs

(Updatable) Mount target details about the LDAP ID mapping configuration.

LifecycleDetails string

Additional information about the current 'lifecycleState'.

Locks []MountTargetLockArgs

Locks associated with this resource.

NsgIds []string

ObservedThroughput string

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

PrivateIpIds []string

The OCIDs of the private IP addresses associated with this mount target.

RequestedThroughput string

ReservedStorageCapacity string

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

State string

The current state of the mount target.

SubnetId string

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

TimeBillingCycleEnd string

TimeCreated string

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

availabilityDomain String

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

compartmentId String

(Updatable) The OCID of the compartment in which to create the mount target.

definedTags Map<String,String>

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

displayName String

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

exportSetId String

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

freeformTags Map<String,String>

hostnameLabel String

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

idmapType String

(Updatable) The method used to map a Unix UID to secondary groups, if any.

ipAddress String

isLockOverride Boolean

(Updatable) Whether to override locks (if any exist).

kerberos MountTargetKerberos

(Updatable) Kerberos details needed to create configuration.

ldapIdmap MountTargetLdapIdmap

(Updatable) Mount target details about the LDAP ID mapping configuration.

lifecycleDetails String

Additional information about the current 'lifecycleState'.

locks List<MountTargetLock>

Locks associated with this resource.

nsgIds List<String>

observedThroughput String

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

privateIpIds List<String>

The OCIDs of the private IP addresses associated with this mount target.

requestedThroughput String

reservedStorageCapacity String

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

state String

The current state of the mount target.

subnetId String

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

timeBillingCycleEnd String

timeCreated String

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

availabilityDomain string

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

compartmentId string

(Updatable) The OCID of the compartment in which to create the mount target.

definedTags {[key: string]: string}

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

displayName string

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

exportSetId string

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

freeformTags {[key: string]: string}

hostnameLabel string

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

idmapType string

(Updatable) The method used to map a Unix UID to secondary groups, if any.

ipAddress string

isLockOverride boolean

(Updatable) Whether to override locks (if any exist).

kerberos MountTargetKerberos

(Updatable) Kerberos details needed to create configuration.

ldapIdmap MountTargetLdapIdmap

(Updatable) Mount target details about the LDAP ID mapping configuration.

lifecycleDetails string

Additional information about the current 'lifecycleState'.

locks MountTargetLock[]

Locks associated with this resource.

nsgIds string[]

observedThroughput string

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

privateIpIds string[]

The OCIDs of the private IP addresses associated with this mount target.

requestedThroughput string

reservedStorageCapacity string

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

state string

The current state of the mount target.

subnetId string

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

timeBillingCycleEnd string

timeCreated string

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

availability_domain str

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

compartment_id str

(Updatable) The OCID of the compartment in which to create the mount target.

defined_tags Mapping[str, str]

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

display_name str

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

export_set_id str

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

freeform_tags Mapping[str, str]

hostname_label str

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

idmap_type str

(Updatable) The method used to map a Unix UID to secondary groups, if any.

ip_address str

is_lock_override bool

(Updatable) Whether to override locks (if any exist).

kerberos filestorage.MountTargetKerberosArgs

(Updatable) Kerberos details needed to create configuration.

ldap_idmap filestorage.MountTargetLdapIdmapArgs

(Updatable) Mount target details about the LDAP ID mapping configuration.

lifecycle_details str

Additional information about the current 'lifecycleState'.

locks Sequence[filestorage.MountTargetLockArgs]

Locks associated with this resource.

nsg_ids Sequence[str]

observed_throughput str

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

private_ip_ids Sequence[str]

The OCIDs of the private IP addresses associated with this mount target.

requested_throughput str

reserved_storage_capacity str

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

state str

The current state of the mount target.

subnet_id str

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

time_billing_cycle_end str

time_created str

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

availabilityDomain String

The availability domain in which to create the mount target. Example: Uocm:PHX-AD-1

compartmentId String

(Updatable) The OCID of the compartment in which to create the mount target.

definedTags Map<String>

(Updatable) Defined tags for this resource. Each key is predefined and scoped to a namespace. For more information, see Resource Tags. Example: {"Operations.CostCenter": "42"}

displayName String

(Updatable) A user-friendly name. It does not have to be unique, and it is changeable. Avoid entering confidential information. Example: My mount target

exportSetId String

The OCID of the associated export set. Controls what file systems will be exported through Network File System (NFS) protocol on this mount target.

freeformTags Map<String>

hostnameLabel String

For more information, see DNS in Your Virtual Cloud Network.

Example: files-1

idmapType String

(Updatable) The method used to map a Unix UID to secondary groups, if any.

ipAddress String

isLockOverride Boolean

(Updatable) Whether to override locks (if any exist).

kerberos Property Map

(Updatable) Kerberos details needed to create configuration.

ldapIdmap Property Map

(Updatable) Mount target details about the LDAP ID mapping configuration.

lifecycleDetails String

Additional information about the current 'lifecycleState'.

locks List<Property Map>

Locks associated with this resource.

nsgIds List<String>

observedThroughput String

Current billed throughput for mount target in Gbps. This corresponds to shape of mount target. Available shapes and corresponding throughput are listed at Mount Target Performance.

privateIpIds List<String>

The OCIDs of the private IP addresses associated with this mount target.

requestedThroughput String

reservedStorageCapacity String

Reserved capacity (GB) associated with this mount target. Reserved capacity depends on observedThroughput value of mount target. Value is listed at Mount Target Performance.

state String

The current state of the mount target.

subnetId String

The OCID of the subnet in which to create the mount target.

** IMPORTANT ** Any change to a property that does not support update will force the destruction and recreation of the resource with the new property values

timeBillingCycleEnd String

timeCreated String

The date and time the mount target was created, expressed in RFC 3339 timestamp format. Example: 2016-08-25T21:10:29.600Z

Supporting Types

MountTargetKerberos, MountTargetKerberosArgs

KerberosRealm string: (Updatable) The Kerberos realm that the mount target will join.
BackupKeyTabSecretVersion int: (Updatable) Version of the keytab Secret in the Vault to use as a backup.
CurrentKeyTabSecretVersion int: (Updatable) Version of the keytab Secret in the Vault to use.
IsKerberosEnabled bool: (Updatable) Specifies whether to enable or disable Kerberos.
KeyTabSecretId string: (Updatable) The OCID of the keytab Secret in the Vault.

KerberosRealm string: (Updatable) The Kerberos realm that the mount target will join.
BackupKeyTabSecretVersion int: (Updatable) Version of the keytab Secret in the Vault to use as a backup.
CurrentKeyTabSecretVersion int: (Updatable) Version of the keytab Secret in the Vault to use.
IsKerberosEnabled bool: (Updatable) Specifies whether to enable or disable Kerberos.
KeyTabSecretId string: (Updatable) The OCID of the keytab Secret in the Vault.

kerberosRealm String: (Updatable) The Kerberos realm that the mount target will join.
backupKeyTabSecretVersion Integer: (Updatable) Version of the keytab Secret in the Vault to use as a backup.
currentKeyTabSecretVersion Integer: (Updatable) Version of the keytab Secret in the Vault to use.
isKerberosEnabled Boolean: (Updatable) Specifies whether to enable or disable Kerberos.
keyTabSecretId String: (Updatable) The OCID of the keytab Secret in the Vault.

kerberosRealm string: (Updatable) The Kerberos realm that the mount target will join.
backupKeyTabSecretVersion number: (Updatable) Version of the keytab Secret in the Vault to use as a backup.
currentKeyTabSecretVersion number: (Updatable) Version of the keytab Secret in the Vault to use.
isKerberosEnabled boolean: (Updatable) Specifies whether to enable or disable Kerberos.
keyTabSecretId string: (Updatable) The OCID of the keytab Secret in the Vault.

kerberos_realm str: (Updatable) The Kerberos realm that the mount target will join.
backup_key_tab_secret_version int: (Updatable) Version of the keytab Secret in the Vault to use as a backup.
current_key_tab_secret_version int: (Updatable) Version of the keytab Secret in the Vault to use.
is_kerberos_enabled bool: (Updatable) Specifies whether to enable or disable Kerberos.
key_tab_secret_id str: (Updatable) The OCID of the keytab Secret in the Vault.

kerberosRealm String: (Updatable) The Kerberos realm that the mount target will join.
backupKeyTabSecretVersion Number: (Updatable) Version of the keytab Secret in the Vault to use as a backup.
currentKeyTabSecretVersion Number: (Updatable) Version of the keytab Secret in the Vault to use.
isKerberosEnabled Boolean: (Updatable) Specifies whether to enable or disable Kerberos.
keyTabSecretId String: (Updatable) The OCID of the keytab Secret in the Vault.

MountTargetLdapIdmap, MountTargetLdapIdmapArgs

CacheLifetimeSeconds int: (Updatable) The maximum amount of time the mount target is allowed to use a cached entry.
CacheRefreshIntervalSeconds int: (Updatable) The amount of time that the mount target should allow an entry to persist in its cache before attempting to refresh the entry.
GroupSearchBase string: (Updatable) All LDAP searches are recursive starting at this group. Example: CN=Group,DC=domain,DC=com
NegativeCacheLifetimeSeconds int: (Updatable) The amount of time that a mount target will maintain information that a user is not found in the ID mapping configuration.
OutboundConnector1id string: (Updatable) The OCID of the first connector to use to communicate with the LDAP server.
OutboundConnector2id string: (Updatable) The OCID of the second connector to use to communicate with the LDAP server.
SchemaType string: (Updatable) Schema type of the LDAP account.
UserSearchBase string: (Updatable) All LDAP searches are recursive starting at this user. Example: CN=User,DC=domain,DC=com

CacheLifetimeSeconds int: (Updatable) The maximum amount of time the mount target is allowed to use a cached entry.
CacheRefreshIntervalSeconds int: (Updatable) The amount of time that the mount target should allow an entry to persist in its cache before attempting to refresh the entry.
GroupSearchBase string: (Updatable) All LDAP searches are recursive starting at this group. Example: CN=Group,DC=domain,DC=com
NegativeCacheLifetimeSeconds int: (Updatable) The amount of time that a mount target will maintain information that a user is not found in the ID mapping configuration.
OutboundConnector1id string: (Updatable) The OCID of the first connector to use to communicate with the LDAP server.
OutboundConnector2id string: (Updatable) The OCID of the second connector to use to communicate with the LDAP server.
SchemaType string: (Updatable) Schema type of the LDAP account.
UserSearchBase string: (Updatable) All LDAP searches are recursive starting at this user. Example: CN=User,DC=domain,DC=com

cacheLifetimeSeconds Integer: (Updatable) The maximum amount of time the mount target is allowed to use a cached entry.
cacheRefreshIntervalSeconds Integer: (Updatable) The amount of time that the mount target should allow an entry to persist in its cache before attempting to refresh the entry.
groupSearchBase String: (Updatable) All LDAP searches are recursive starting at this group. Example: CN=Group,DC=domain,DC=com
negativeCacheLifetimeSeconds Integer: (Updatable) The amount of time that a mount target will maintain information that a user is not found in the ID mapping configuration.
outboundConnector1id String: (Updatable) The OCID of the first connector to use to communicate with the LDAP server.
outboundConnector2id String: (Updatable) The OCID of the second connector to use to communicate with the LDAP server.
schemaType String: (Updatable) Schema type of the LDAP account.
userSearchBase String: (Updatable) All LDAP searches are recursive starting at this user. Example: CN=User,DC=domain,DC=com

cacheLifetimeSeconds number: (Updatable) The maximum amount of time the mount target is allowed to use a cached entry.
cacheRefreshIntervalSeconds number: (Updatable) The amount of time that the mount target should allow an entry to persist in its cache before attempting to refresh the entry.
groupSearchBase string: (Updatable) All LDAP searches are recursive starting at this group. Example: CN=Group,DC=domain,DC=com
negativeCacheLifetimeSeconds number: (Updatable) The amount of time that a mount target will maintain information that a user is not found in the ID mapping configuration.
outboundConnector1id string: (Updatable) The OCID of the first connector to use to communicate with the LDAP server.
outboundConnector2id string: (Updatable) The OCID of the second connector to use to communicate with the LDAP server.
schemaType string: (Updatable) Schema type of the LDAP account.
userSearchBase string: (Updatable) All LDAP searches are recursive starting at this user. Example: CN=User,DC=domain,DC=com

cache_lifetime_seconds int: (Updatable) The maximum amount of time the mount target is allowed to use a cached entry.
cache_refresh_interval_seconds int: (Updatable) The amount of time that the mount target should allow an entry to persist in its cache before attempting to refresh the entry.
group_search_base str: (Updatable) All LDAP searches are recursive starting at this group. Example: CN=Group,DC=domain,DC=com
negative_cache_lifetime_seconds int: (Updatable) The amount of time that a mount target will maintain information that a user is not found in the ID mapping configuration.
outbound_connector1id str: (Updatable) The OCID of the first connector to use to communicate with the LDAP server.
outbound_connector2id str: (Updatable) The OCID of the second connector to use to communicate with the LDAP server.
schema_type str: (Updatable) Schema type of the LDAP account.
user_search_base str: (Updatable) All LDAP searches are recursive starting at this user. Example: CN=User,DC=domain,DC=com

cacheLifetimeSeconds Number: (Updatable) The maximum amount of time the mount target is allowed to use a cached entry.
cacheRefreshIntervalSeconds Number: (Updatable) The amount of time that the mount target should allow an entry to persist in its cache before attempting to refresh the entry.
groupSearchBase String: (Updatable) All LDAP searches are recursive starting at this group. Example: CN=Group,DC=domain,DC=com
negativeCacheLifetimeSeconds Number: (Updatable) The amount of time that a mount target will maintain information that a user is not found in the ID mapping configuration.
outboundConnector1id String: (Updatable) The OCID of the first connector to use to communicate with the LDAP server.
outboundConnector2id String: (Updatable) The OCID of the second connector to use to communicate with the LDAP server.
schemaType String: (Updatable) Schema type of the LDAP account.
userSearchBase String: (Updatable) All LDAP searches are recursive starting at this user. Example: CN=User,DC=domain,DC=com

MountTargetLock, MountTargetLockArgs

Type string: Type of the lock.
Message string: A message added by the creator of the lock. This is typically used to give an indication of why the resource is locked.
RelatedResourceId string: The ID of the resource that is locking this resource. Indicates that deleting this resource will remove the lock.
TimeCreated string: When the lock was created.

Type string: Type of the lock.
Message string: A message added by the creator of the lock. This is typically used to give an indication of why the resource is locked.
RelatedResourceId string: The ID of the resource that is locking this resource. Indicates that deleting this resource will remove the lock.
TimeCreated string: When the lock was created.

type String: Type of the lock.
message String: A message added by the creator of the lock. This is typically used to give an indication of why the resource is locked.
relatedResourceId String: The ID of the resource that is locking this resource. Indicates that deleting this resource will remove the lock.
timeCreated String: When the lock was created.

type string: Type of the lock.
message string: A message added by the creator of the lock. This is typically used to give an indication of why the resource is locked.
relatedResourceId string: The ID of the resource that is locking this resource. Indicates that deleting this resource will remove the lock.
timeCreated string: When the lock was created.

type str: Type of the lock.
message str: A message added by the creator of the lock. This is typically used to give an indication of why the resource is locked.
related_resource_id str: The ID of the resource that is locking this resource. Indicates that deleting this resource will remove the lock.
time_created str: When the lock was created.

type String: Type of the lock.
message String: A message added by the creator of the lock. This is typically used to give an indication of why the resource is locked.
relatedResourceId String: The ID of the resource that is locking this resource. Indicates that deleting this resource will remove the lock.
timeCreated String: When the lock was created.

Import

MountTargets can be imported using the id, e.g.

$ pulumi import oci:FileStorage/mountTarget:MountTarget test_mount_target "id"

To learn more about importing existing cloud resources, see Importing resources.

Package Details

Repository: oci pulumi/pulumi-oci
License: Apache-2.0
Notes: This Pulumi package is based on the oci Terraform Provider.

Oracle Cloud Infrastructure v2.17.0 published on Friday, Nov 15, 2024 by Pulumi

pulumi/pulumi-oci

oci.FileStorage.MountTarget

On this page

On this page

Example Usage

Create MountTarget Resource

Constructor syntax

Parameters

Constructor example

MountTarget Resource Properties

Inputs

Outputs

Look up Existing MountTarget Resource

Supporting Types

MountTargetKerberos, MountTargetKerberosArgs

MountTargetLdapIdmap, MountTargetLdapIdmapArgs

MountTargetLock, MountTargetLockArgs

Import

Package Details

On this page

On this page