Docs Home
Google Cloud Classic v8.9.3 published on Monday, Nov 18, 2024 by Pulumi
gcp.compute.URLMap
Explore with Pulumi AI
UrlMaps are used to route requests to a backend service based on rules that you define for the host and path of an incoming URL.
To get more information about UrlMap, see:
Example Usage
Url Map Bucket And Service
import * as pulumi from "@pulumi/pulumi";
import * as gcp from "@pulumi/gcp";
const _default = new gcp.compute.HttpHealthCheck("default", {
name: "health-check",
requestPath: "/",
checkIntervalSec: 1,
timeoutSec: 1,
});
const login = new gcp.compute.BackendService("login", {
name: "login",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: _default.id,
});
const staticBucket = new gcp.storage.Bucket("static", {
name: "static-asset-bucket",
location: "US",
});
const static = new gcp.compute.BackendBucket("static", {
name: "static-asset-backend-bucket",
bucketName: staticBucket.name,
enableCdn: true,
});
const urlmap = new gcp.compute.URLMap("urlmap", {
name: "urlmap",
description: "a description",
defaultService: static.id,
hostRules: [
{
hosts: ["mysite.com"],
pathMatcher: "mysite",
},
{
hosts: ["myothersite.com"],
pathMatcher: "otherpaths",
},
],
pathMatchers: [
{
name: "mysite",
defaultService: static.id,
pathRules: [
{
paths: ["/home"],
service: static.id,
},
{
paths: ["/login"],
service: login.id,
},
{
paths: ["/static"],
service: static.id,
},
],
},
{
name: "otherpaths",
defaultService: static.id,
},
],
tests: [{
service: static.id,
host: "example.com",
path: "/home",
}],
});
import pulumi
import pulumi_gcp as gcp
default = gcp.compute.HttpHealthCheck("default",
name="health-check",
request_path="/",
check_interval_sec=1,
timeout_sec=1)
login = gcp.compute.BackendService("login",
name="login",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default.id)
static_bucket = gcp.storage.Bucket("static",
name="static-asset-bucket",
location="US")
static = gcp.compute.BackendBucket("static",
name="static-asset-backend-bucket",
bucket_name=static_bucket.name,
enable_cdn=True)
urlmap = gcp.compute.URLMap("urlmap",
name="urlmap",
description="a description",
default_service=static.id,
host_rules=[
{
"hosts": ["mysite.com"],
"path_matcher": "mysite",
},
{
"hosts": ["myothersite.com"],
"path_matcher": "otherpaths",
},
],
path_matchers=[
{
"name": "mysite",
"default_service": static.id,
"path_rules": [
{
"paths": ["/home"],
"service": static.id,
},
{
"paths": ["/login"],
"service": login.id,
},
{
"paths": ["/static"],
"service": static.id,
},
],
},
{
"name": "otherpaths",
"default_service": static.id,
},
],
tests=[{
"service": static.id,
"host": "example.com",
"path": "/home",
}])
package main
import (
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/storage"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
_, err := compute.NewHttpHealthCheck(ctx, "default", &compute.HttpHealthCheckArgs{
Name: pulumi.String("health-check"),
RequestPath: pulumi.String("/"),
CheckIntervalSec: pulumi.Int(1),
TimeoutSec: pulumi.Int(1),
})
if err != nil {
return err
}
login, err := compute.NewBackendService(ctx, "login", &compute.BackendServiceArgs{
Name: pulumi.String("login"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: _default.ID(),
})
if err != nil {
return err
}
staticBucket, err := storage.NewBucket(ctx, "static", &storage.BucketArgs{
Name: pulumi.String("static-asset-bucket"),
Location: pulumi.String("US"),
})
if err != nil {
return err
}
static, err := compute.NewBackendBucket(ctx, "static", &compute.BackendBucketArgs{
Name: pulumi.String("static-asset-backend-bucket"),
BucketName: staticBucket.Name,
EnableCdn: pulumi.Bool(true),
})
if err != nil {
return err
}
_, err = compute.NewURLMap(ctx, "urlmap", &compute.URLMapArgs{
Name: pulumi.String("urlmap"),
Description: pulumi.String("a description"),
DefaultService: static.ID(),
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("mysite.com"),
},
PathMatcher: pulumi.String("mysite"),
},
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("myothersite.com"),
},
PathMatcher: pulumi.String("otherpaths"),
},
},
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("mysite"),
DefaultService: static.ID(),
PathRules: compute.URLMapPathMatcherPathRuleArray{
&compute.URLMapPathMatcherPathRuleArgs{
Paths: pulumi.StringArray{
pulumi.String("/home"),
},
Service: static.ID(),
},
&compute.URLMapPathMatcherPathRuleArgs{
Paths: pulumi.StringArray{
pulumi.String("/login"),
},
Service: login.ID(),
},
&compute.URLMapPathMatcherPathRuleArgs{
Paths: pulumi.StringArray{
pulumi.String("/static"),
},
Service: static.ID(),
},
},
},
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("otherpaths"),
DefaultService: static.ID(),
},
},
Tests: compute.URLMapTestArray{
&compute.URLMapTestArgs{
Service: static.ID(),
Host: pulumi.String("example.com"),
Path: pulumi.String("/home"),
},
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Gcp = Pulumi.Gcp;
return await Deployment.RunAsync(() =>
{
var @default = new Gcp.Compute.HttpHealthCheck("default", new()
{
Name = "health-check",
RequestPath = "/",
CheckIntervalSec = 1,
TimeoutSec = 1,
});
var login = new Gcp.Compute.BackendService("login", new()
{
Name = "login",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = @default.Id,
});
var staticBucket = new Gcp.Storage.Bucket("static", new()
{
Name = "static-asset-bucket",
Location = "US",
});
var @static = new Gcp.Compute.BackendBucket("static", new()
{
Name = "static-asset-backend-bucket",
BucketName = staticBucket.Name,
EnableCdn = true,
});
var urlmap = new Gcp.Compute.URLMap("urlmap", new()
{
Name = "urlmap",
Description = "a description",
DefaultService = @static.Id,
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"mysite.com",
},
PathMatcher = "mysite",
},
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"myothersite.com",
},
PathMatcher = "otherpaths",
},
},
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "mysite",
DefaultService = @static.Id,
PathRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleArgs
{
Paths = new[]
{
"/home",
},
Service = @static.Id,
},
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleArgs
{
Paths = new[]
{
"/login",
},
Service = login.Id,
},
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleArgs
{
Paths = new[]
{
"/static",
},
Service = @static.Id,
},
},
},
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "otherpaths",
DefaultService = @static.Id,
},
},
Tests = new[]
{
new Gcp.Compute.Inputs.URLMapTestArgs
{
Service = @static.Id,
Host = "example.com",
Path = "/home",
},
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.gcp.compute.HttpHealthCheck;
import com.pulumi.gcp.compute.HttpHealthCheckArgs;
import com.pulumi.gcp.compute.BackendService;
import com.pulumi.gcp.compute.BackendServiceArgs;
import com.pulumi.gcp.storage.Bucket;
import com.pulumi.gcp.storage.BucketArgs;
import com.pulumi.gcp.compute.BackendBucket;
import com.pulumi.gcp.compute.BackendBucketArgs;
import com.pulumi.gcp.compute.URLMap;
import com.pulumi.gcp.compute.URLMapArgs;
import com.pulumi.gcp.compute.inputs.URLMapHostRuleArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherArgs;
import com.pulumi.gcp.compute.inputs.URLMapTestArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var default_ = new HttpHealthCheck("default", HttpHealthCheckArgs.builder()
.name("health-check")
.requestPath("/")
.checkIntervalSec(1)
.timeoutSec(1)
.build());
var login = new BackendService("login", BackendServiceArgs.builder()
.name("login")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(default_.id())
.build());
var staticBucket = new Bucket("staticBucket", BucketArgs.builder()
.name("static-asset-bucket")
.location("US")
.build());
var static_ = new BackendBucket("static", BackendBucketArgs.builder()
.name("static-asset-backend-bucket")
.bucketName(staticBucket.name())
.enableCdn(true)
.build());
var urlmap = new URLMap("urlmap", URLMapArgs.builder()
.name("urlmap")
.description("a description")
.defaultService(static_.id())
.hostRules(
URLMapHostRuleArgs.builder()
.hosts("mysite.com")
.pathMatcher("mysite")
.build(),
URLMapHostRuleArgs.builder()
.hosts("myothersite.com")
.pathMatcher("otherpaths")
.build())
.pathMatchers(
URLMapPathMatcherArgs.builder()
.name("mysite")
.defaultService(static_.id())
.pathRules(
URLMapPathMatcherPathRuleArgs.builder()
.paths("/home")
.service(static_.id())
.build(),
URLMapPathMatcherPathRuleArgs.builder()
.paths("/login")
.service(login.id())
.build(),
URLMapPathMatcherPathRuleArgs.builder()
.paths("/static")
.service(static_.id())
.build())
.build(),
URLMapPathMatcherArgs.builder()
.name("otherpaths")
.defaultService(static_.id())
.build())
.tests(URLMapTestArgs.builder()
.service(static_.id())
.host("example.com")
.path("/home")
.build())
.build());
}
}
resources:
urlmap:
type: gcp:compute:URLMap
properties:
name: urlmap
description: a description
defaultService: ${static.id}
hostRules:
- hosts:
- mysite.com
pathMatcher: mysite
- hosts:
- myothersite.com
pathMatcher: otherpaths
pathMatchers:
- name: mysite
defaultService: ${static.id}
pathRules:
- paths:
- /home
service: ${static.id}
- paths:
- /login
service: ${login.id}
- paths:
- /static
service: ${static.id}
- name: otherpaths
defaultService: ${static.id}
tests:
- service: ${static.id}
host: example.com
path: /home
login:
type: gcp:compute:BackendService
properties:
name: login
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${default.id}
default:
type: gcp:compute:HttpHealthCheck
properties:
name: health-check
requestPath: /
checkIntervalSec: 1
timeoutSec: 1
static:
type: gcp:compute:BackendBucket
properties:
name: static-asset-backend-bucket
bucketName: ${staticBucket.name}
enableCdn: true
staticBucket:
type: gcp:storage:Bucket
name: static
properties:
name: static-asset-bucket
location: US
Url Map Traffic Director Route
import * as pulumi from "@pulumi/pulumi";
import * as gcp from "@pulumi/gcp";
const _default = new gcp.compute.HealthCheck("default", {
name: "health-check",
httpHealthCheck: {
port: 80,
},
});
const home = new gcp.compute.BackendService("home", {
name: "home",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: _default.id,
loadBalancingScheme: "INTERNAL_SELF_MANAGED",
});
const urlmap = new gcp.compute.URLMap("urlmap", {
name: "urlmap",
description: "a description",
defaultService: home.id,
hostRules: [{
hosts: ["mysite.com"],
pathMatcher: "allpaths",
}],
pathMatchers: [{
name: "allpaths",
defaultService: home.id,
routeRules: [{
priority: 1,
headerAction: {
requestHeadersToRemoves: ["RemoveMe2"],
requestHeadersToAdds: [{
headerName: "AddSomethingElse",
headerValue: "MyOtherValue",
replace: true,
}],
responseHeadersToRemoves: ["RemoveMe3"],
responseHeadersToAdds: [{
headerName: "AddMe",
headerValue: "MyValue",
replace: false,
}],
},
matchRules: [{
fullPathMatch: "a full path",
headerMatches: [{
headerName: "someheader",
exactMatch: "match this exactly",
invertMatch: true,
}],
ignoreCase: true,
metadataFilters: [{
filterMatchCriteria: "MATCH_ANY",
filterLabels: [{
name: "PLANET",
value: "MARS",
}],
}],
queryParameterMatches: [{
name: "a query parameter",
presentMatch: true,
}],
}],
urlRedirect: {
hostRedirect: "A host",
httpsRedirect: false,
pathRedirect: "some/path",
redirectResponseCode: "TEMPORARY_REDIRECT",
stripQuery: true,
},
}],
}],
tests: [{
service: home.id,
host: "hi.com",
path: "/home",
}],
});
import pulumi
import pulumi_gcp as gcp
default = gcp.compute.HealthCheck("default",
name="health-check",
http_health_check={
"port": 80,
})
home = gcp.compute.BackendService("home",
name="home",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default.id,
load_balancing_scheme="INTERNAL_SELF_MANAGED")
urlmap = gcp.compute.URLMap("urlmap",
name="urlmap",
description="a description",
default_service=home.id,
host_rules=[{
"hosts": ["mysite.com"],
"path_matcher": "allpaths",
}],
path_matchers=[{
"name": "allpaths",
"default_service": home.id,
"route_rules": [{
"priority": 1,
"header_action": {
"request_headers_to_removes": ["RemoveMe2"],
"request_headers_to_adds": [{
"header_name": "AddSomethingElse",
"header_value": "MyOtherValue",
"replace": True,
}],
"response_headers_to_removes": ["RemoveMe3"],
"response_headers_to_adds": [{
"header_name": "AddMe",
"header_value": "MyValue",
"replace": False,
}],
},
"match_rules": [{
"full_path_match": "a full path",
"header_matches": [{
"header_name": "someheader",
"exact_match": "match this exactly",
"invert_match": True,
}],
"ignore_case": True,
"metadata_filters": [{
"filter_match_criteria": "MATCH_ANY",
"filter_labels": [{
"name": "PLANET",
"value": "MARS",
}],
}],
"query_parameter_matches": [{
"name": "a query parameter",
"present_match": True,
}],
}],
"url_redirect": {
"host_redirect": "A host",
"https_redirect": False,
"path_redirect": "some/path",
"redirect_response_code": "TEMPORARY_REDIRECT",
"strip_query": True,
},
}],
}],
tests=[{
"service": home.id,
"host": "hi.com",
"path": "/home",
}])
package main
import (
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
_, err := compute.NewHealthCheck(ctx, "default", &compute.HealthCheckArgs{
Name: pulumi.String("health-check"),
HttpHealthCheck: &compute.HealthCheckHttpHealthCheckArgs{
Port: pulumi.Int(80),
},
})
if err != nil {
return err
}
home, err := compute.NewBackendService(ctx, "home", &compute.BackendServiceArgs{
Name: pulumi.String("home"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: _default.ID(),
LoadBalancingScheme: pulumi.String("INTERNAL_SELF_MANAGED"),
})
if err != nil {
return err
}
_, err = compute.NewURLMap(ctx, "urlmap", &compute.URLMapArgs{
Name: pulumi.String("urlmap"),
Description: pulumi.String("a description"),
DefaultService: home.ID(),
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("mysite.com"),
},
PathMatcher: pulumi.String("allpaths"),
},
},
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("allpaths"),
DefaultService: home.ID(),
RouteRules: compute.URLMapPathMatcherRouteRuleArray{
&compute.URLMapPathMatcherRouteRuleArgs{
Priority: pulumi.Int(1),
HeaderAction: &compute.URLMapPathMatcherRouteRuleHeaderActionArgs{
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("RemoveMe2"),
},
RequestHeadersToAdds: compute.URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArray{
&compute.URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("AddSomethingElse"),
HeaderValue: pulumi.String("MyOtherValue"),
Replace: pulumi.Bool(true),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("RemoveMe3"),
},
ResponseHeadersToAdds: compute.URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArray{
&compute.URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("AddMe"),
HeaderValue: pulumi.String("MyValue"),
Replace: pulumi.Bool(false),
},
},
},
MatchRules: compute.URLMapPathMatcherRouteRuleMatchRuleArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleArgs{
FullPathMatch: pulumi.String("a full path"),
HeaderMatches: compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs{
HeaderName: pulumi.String("someheader"),
ExactMatch: pulumi.String("match this exactly"),
InvertMatch: pulumi.Bool(true),
},
},
IgnoreCase: pulumi.Bool(true),
MetadataFilters: compute.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterArgs{
FilterMatchCriteria: pulumi.String("MATCH_ANY"),
FilterLabels: compute.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArgs{
Name: pulumi.String("PLANET"),
Value: pulumi.String("MARS"),
},
},
},
},
QueryParameterMatches: compute.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs{
Name: pulumi.String("a query parameter"),
PresentMatch: pulumi.Bool(true),
},
},
},
},
UrlRedirect: &compute.URLMapPathMatcherRouteRuleUrlRedirectArgs{
HostRedirect: pulumi.String("A host"),
HttpsRedirect: pulumi.Bool(false),
PathRedirect: pulumi.String("some/path"),
RedirectResponseCode: pulumi.String("TEMPORARY_REDIRECT"),
StripQuery: pulumi.Bool(true),
},
},
},
},
},
Tests: compute.URLMapTestArray{
&compute.URLMapTestArgs{
Service: home.ID(),
Host: pulumi.String("hi.com"),
Path: pulumi.String("/home"),
},
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Gcp = Pulumi.Gcp;
return await Deployment.RunAsync(() =>
{
var @default = new Gcp.Compute.HealthCheck("default", new()
{
Name = "health-check",
HttpHealthCheck = new Gcp.Compute.Inputs.HealthCheckHttpHealthCheckArgs
{
Port = 80,
},
});
var home = new Gcp.Compute.BackendService("home", new()
{
Name = "home",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = @default.Id,
LoadBalancingScheme = "INTERNAL_SELF_MANAGED",
});
var urlmap = new Gcp.Compute.URLMap("urlmap", new()
{
Name = "urlmap",
Description = "a description",
DefaultService = home.Id,
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"mysite.com",
},
PathMatcher = "allpaths",
},
},
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "allpaths",
DefaultService = home.Id,
RouteRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleArgs
{
Priority = 1,
HeaderAction = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleHeaderActionArgs
{
RequestHeadersToRemoves = new[]
{
"RemoveMe2",
},
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArgs
{
HeaderName = "AddSomethingElse",
HeaderValue = "MyOtherValue",
Replace = true,
},
},
ResponseHeadersToRemoves = new[]
{
"RemoveMe3",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArgs
{
HeaderName = "AddMe",
HeaderValue = "MyValue",
Replace = false,
},
},
},
MatchRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleArgs
{
FullPathMatch = "a full path",
HeaderMatches = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs
{
HeaderName = "someheader",
ExactMatch = "match this exactly",
InvertMatch = true,
},
},
IgnoreCase = true,
MetadataFilters = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterArgs
{
FilterMatchCriteria = "MATCH_ANY",
FilterLabels = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArgs
{
Name = "PLANET",
Value = "MARS",
},
},
},
},
QueryParameterMatches = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs
{
Name = "a query parameter",
PresentMatch = true,
},
},
},
},
UrlRedirect = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleUrlRedirectArgs
{
HostRedirect = "A host",
HttpsRedirect = false,
PathRedirect = "some/path",
RedirectResponseCode = "TEMPORARY_REDIRECT",
StripQuery = true,
},
},
},
},
},
Tests = new[]
{
new Gcp.Compute.Inputs.URLMapTestArgs
{
Service = home.Id,
Host = "hi.com",
Path = "/home",
},
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.gcp.compute.HealthCheck;
import com.pulumi.gcp.compute.HealthCheckArgs;
import com.pulumi.gcp.compute.inputs.HealthCheckHttpHealthCheckArgs;
import com.pulumi.gcp.compute.BackendService;
import com.pulumi.gcp.compute.BackendServiceArgs;
import com.pulumi.gcp.compute.URLMap;
import com.pulumi.gcp.compute.URLMapArgs;
import com.pulumi.gcp.compute.inputs.URLMapHostRuleArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherArgs;
import com.pulumi.gcp.compute.inputs.URLMapTestArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var default_ = new HealthCheck("default", HealthCheckArgs.builder()
.name("health-check")
.httpHealthCheck(HealthCheckHttpHealthCheckArgs.builder()
.port(80)
.build())
.build());
var home = new BackendService("home", BackendServiceArgs.builder()
.name("home")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(default_.id())
.loadBalancingScheme("INTERNAL_SELF_MANAGED")
.build());
var urlmap = new URLMap("urlmap", URLMapArgs.builder()
.name("urlmap")
.description("a description")
.defaultService(home.id())
.hostRules(URLMapHostRuleArgs.builder()
.hosts("mysite.com")
.pathMatcher("allpaths")
.build())
.pathMatchers(URLMapPathMatcherArgs.builder()
.name("allpaths")
.defaultService(home.id())
.routeRules(URLMapPathMatcherRouteRuleArgs.builder()
.priority(1)
.headerAction(URLMapPathMatcherRouteRuleHeaderActionArgs.builder()
.requestHeadersToRemoves("RemoveMe2")
.requestHeadersToAdds(URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArgs.builder()
.headerName("AddSomethingElse")
.headerValue("MyOtherValue")
.replace(true)
.build())
.responseHeadersToRemoves("RemoveMe3")
.responseHeadersToAdds(URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArgs.builder()
.headerName("AddMe")
.headerValue("MyValue")
.replace(false)
.build())
.build())
.matchRules(URLMapPathMatcherRouteRuleMatchRuleArgs.builder()
.fullPathMatch("a full path")
.headerMatches(URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs.builder()
.headerName("someheader")
.exactMatch("match this exactly")
.invertMatch(true)
.build())
.ignoreCase(true)
.metadataFilters(URLMapPathMatcherRouteRuleMatchRuleMetadataFilterArgs.builder()
.filterMatchCriteria("MATCH_ANY")
.filterLabels(URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArgs.builder()
.name("PLANET")
.value("MARS")
.build())
.build())
.queryParameterMatches(URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs.builder()
.name("a query parameter")
.presentMatch(true)
.build())
.build())
.urlRedirect(URLMapPathMatcherRouteRuleUrlRedirectArgs.builder()
.hostRedirect("A host")
.httpsRedirect(false)
.pathRedirect("some/path")
.redirectResponseCode("TEMPORARY_REDIRECT")
.stripQuery(true)
.build())
.build())
.build())
.tests(URLMapTestArgs.builder()
.service(home.id())
.host("hi.com")
.path("/home")
.build())
.build());
}
}
resources:
urlmap:
type: gcp:compute:URLMap
properties:
name: urlmap
description: a description
defaultService: ${home.id}
hostRules:
- hosts:
- mysite.com
pathMatcher: allpaths
pathMatchers:
- name: allpaths
defaultService: ${home.id}
routeRules:
- priority: 1
headerAction:
requestHeadersToRemoves:
- RemoveMe2
requestHeadersToAdds:
- headerName: AddSomethingElse
headerValue: MyOtherValue
replace: true
responseHeadersToRemoves:
- RemoveMe3
responseHeadersToAdds:
- headerName: AddMe
headerValue: MyValue
replace: false
matchRules:
- fullPathMatch: a full path
headerMatches:
- headerName: someheader
exactMatch: match this exactly
invertMatch: true
ignoreCase: true
metadataFilters:
- filterMatchCriteria: MATCH_ANY
filterLabels:
- name: PLANET
value: MARS
queryParameterMatches:
- name: a query parameter
presentMatch: true
urlRedirect:
hostRedirect: A host
httpsRedirect: false
pathRedirect: some/path
redirectResponseCode: TEMPORARY_REDIRECT
stripQuery: true
tests:
- service: ${home.id}
host: hi.com
path: /home
home:
type: gcp:compute:BackendService
properties:
name: home
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${default.id}
loadBalancingScheme: INTERNAL_SELF_MANAGED
default:
type: gcp:compute:HealthCheck
properties:
name: health-check
httpHealthCheck:
port: 80
Url Map Traffic Director Route Partial
import * as pulumi from "@pulumi/pulumi";
import * as gcp from "@pulumi/gcp";
const _default = new gcp.compute.HealthCheck("default", {
name: "health-check",
httpHealthCheck: {
port: 80,
},
});
const home = new gcp.compute.BackendService("home", {
name: "home",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: _default.id,
loadBalancingScheme: "INTERNAL_SELF_MANAGED",
});
const urlmap = new gcp.compute.URLMap("urlmap", {
name: "urlmap",
description: "a description",
defaultService: home.id,
hostRules: [{
hosts: ["mysite.com"],
pathMatcher: "allpaths",
}],
pathMatchers: [{
name: "allpaths",
defaultService: home.id,
routeRules: [{
priority: 1,
matchRules: [{
prefixMatch: "/someprefix",
headerMatches: [{
headerName: "someheader",
exactMatch: "match this exactly",
invertMatch: true,
}],
}],
urlRedirect: {
pathRedirect: "some/path",
redirectResponseCode: "TEMPORARY_REDIRECT",
},
}],
}],
tests: [{
service: home.id,
host: "hi.com",
path: "/home",
}],
});
import pulumi
import pulumi_gcp as gcp
default = gcp.compute.HealthCheck("default",
name="health-check",
http_health_check={
"port": 80,
})
home = gcp.compute.BackendService("home",
name="home",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default.id,
load_balancing_scheme="INTERNAL_SELF_MANAGED")
urlmap = gcp.compute.URLMap("urlmap",
name="urlmap",
description="a description",
default_service=home.id,
host_rules=[{
"hosts": ["mysite.com"],
"path_matcher": "allpaths",
}],
path_matchers=[{
"name": "allpaths",
"default_service": home.id,
"route_rules": [{
"priority": 1,
"match_rules": [{
"prefix_match": "/someprefix",
"header_matches": [{
"header_name": "someheader",
"exact_match": "match this exactly",
"invert_match": True,
}],
}],
"url_redirect": {
"path_redirect": "some/path",
"redirect_response_code": "TEMPORARY_REDIRECT",
},
}],
}],
tests=[{
"service": home.id,
"host": "hi.com",
"path": "/home",
}])
package main
import (
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
_, err := compute.NewHealthCheck(ctx, "default", &compute.HealthCheckArgs{
Name: pulumi.String("health-check"),
HttpHealthCheck: &compute.HealthCheckHttpHealthCheckArgs{
Port: pulumi.Int(80),
},
})
if err != nil {
return err
}
home, err := compute.NewBackendService(ctx, "home", &compute.BackendServiceArgs{
Name: pulumi.String("home"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: _default.ID(),
LoadBalancingScheme: pulumi.String("INTERNAL_SELF_MANAGED"),
})
if err != nil {
return err
}
_, err = compute.NewURLMap(ctx, "urlmap", &compute.URLMapArgs{
Name: pulumi.String("urlmap"),
Description: pulumi.String("a description"),
DefaultService: home.ID(),
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("mysite.com"),
},
PathMatcher: pulumi.String("allpaths"),
},
},
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("allpaths"),
DefaultService: home.ID(),
RouteRules: compute.URLMapPathMatcherRouteRuleArray{
&compute.URLMapPathMatcherRouteRuleArgs{
Priority: pulumi.Int(1),
MatchRules: compute.URLMapPathMatcherRouteRuleMatchRuleArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleArgs{
PrefixMatch: pulumi.String("/someprefix"),
HeaderMatches: compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs{
HeaderName: pulumi.String("someheader"),
ExactMatch: pulumi.String("match this exactly"),
InvertMatch: pulumi.Bool(true),
},
},
},
},
UrlRedirect: &compute.URLMapPathMatcherRouteRuleUrlRedirectArgs{
PathRedirect: pulumi.String("some/path"),
RedirectResponseCode: pulumi.String("TEMPORARY_REDIRECT"),
},
},
},
},
},
Tests: compute.URLMapTestArray{
&compute.URLMapTestArgs{
Service: home.ID(),
Host: pulumi.String("hi.com"),
Path: pulumi.String("/home"),
},
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Gcp = Pulumi.Gcp;
return await Deployment.RunAsync(() =>
{
var @default = new Gcp.Compute.HealthCheck("default", new()
{
Name = "health-check",
HttpHealthCheck = new Gcp.Compute.Inputs.HealthCheckHttpHealthCheckArgs
{
Port = 80,
},
});
var home = new Gcp.Compute.BackendService("home", new()
{
Name = "home",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = @default.Id,
LoadBalancingScheme = "INTERNAL_SELF_MANAGED",
});
var urlmap = new Gcp.Compute.URLMap("urlmap", new()
{
Name = "urlmap",
Description = "a description",
DefaultService = home.Id,
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"mysite.com",
},
PathMatcher = "allpaths",
},
},
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "allpaths",
DefaultService = home.Id,
RouteRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleArgs
{
Priority = 1,
MatchRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleArgs
{
PrefixMatch = "/someprefix",
HeaderMatches = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs
{
HeaderName = "someheader",
ExactMatch = "match this exactly",
InvertMatch = true,
},
},
},
},
UrlRedirect = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleUrlRedirectArgs
{
PathRedirect = "some/path",
RedirectResponseCode = "TEMPORARY_REDIRECT",
},
},
},
},
},
Tests = new[]
{
new Gcp.Compute.Inputs.URLMapTestArgs
{
Service = home.Id,
Host = "hi.com",
Path = "/home",
},
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.gcp.compute.HealthCheck;
import com.pulumi.gcp.compute.HealthCheckArgs;
import com.pulumi.gcp.compute.inputs.HealthCheckHttpHealthCheckArgs;
import com.pulumi.gcp.compute.BackendService;
import com.pulumi.gcp.compute.BackendServiceArgs;
import com.pulumi.gcp.compute.URLMap;
import com.pulumi.gcp.compute.URLMapArgs;
import com.pulumi.gcp.compute.inputs.URLMapHostRuleArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherArgs;
import com.pulumi.gcp.compute.inputs.URLMapTestArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var default_ = new HealthCheck("default", HealthCheckArgs.builder()
.name("health-check")
.httpHealthCheck(HealthCheckHttpHealthCheckArgs.builder()
.port(80)
.build())
.build());
var home = new BackendService("home", BackendServiceArgs.builder()
.name("home")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(default_.id())
.loadBalancingScheme("INTERNAL_SELF_MANAGED")
.build());
var urlmap = new URLMap("urlmap", URLMapArgs.builder()
.name("urlmap")
.description("a description")
.defaultService(home.id())
.hostRules(URLMapHostRuleArgs.builder()
.hosts("mysite.com")
.pathMatcher("allpaths")
.build())
.pathMatchers(URLMapPathMatcherArgs.builder()
.name("allpaths")
.defaultService(home.id())
.routeRules(URLMapPathMatcherRouteRuleArgs.builder()
.priority(1)
.matchRules(URLMapPathMatcherRouteRuleMatchRuleArgs.builder()
.prefixMatch("/someprefix")
.headerMatches(URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs.builder()
.headerName("someheader")
.exactMatch("match this exactly")
.invertMatch(true)
.build())
.build())
.urlRedirect(URLMapPathMatcherRouteRuleUrlRedirectArgs.builder()
.pathRedirect("some/path")
.redirectResponseCode("TEMPORARY_REDIRECT")
.build())
.build())
.build())
.tests(URLMapTestArgs.builder()
.service(home.id())
.host("hi.com")
.path("/home")
.build())
.build());
}
}
resources:
urlmap:
type: gcp:compute:URLMap
properties:
name: urlmap
description: a description
defaultService: ${home.id}
hostRules:
- hosts:
- mysite.com
pathMatcher: allpaths
pathMatchers:
- name: allpaths
defaultService: ${home.id}
routeRules:
- priority: 1
matchRules:
- prefixMatch: /someprefix
headerMatches:
- headerName: someheader
exactMatch: match this exactly
invertMatch: true
urlRedirect:
pathRedirect: some/path
redirectResponseCode: TEMPORARY_REDIRECT
tests:
- service: ${home.id}
host: hi.com
path: /home
home:
type: gcp:compute:BackendService
properties:
name: home
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${default.id}
loadBalancingScheme: INTERNAL_SELF_MANAGED
default:
type: gcp:compute:HealthCheck
properties:
name: health-check
httpHealthCheck:
port: 80
Url Map Traffic Director Path
import * as pulumi from "@pulumi/pulumi";
import * as gcp from "@pulumi/gcp";
const _default = new gcp.compute.HealthCheck("default", {
name: "health-check",
httpHealthCheck: {
port: 80,
},
});
const home = new gcp.compute.BackendService("home", {
name: "home",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: _default.id,
loadBalancingScheme: "INTERNAL_SELF_MANAGED",
});
const urlmap = new gcp.compute.URLMap("urlmap", {
name: "urlmap",
description: "a description",
defaultService: home.id,
hostRules: [{
hosts: ["mysite.com"],
pathMatcher: "allpaths",
}],
pathMatchers: [{
name: "allpaths",
defaultService: home.id,
pathRules: [{
paths: ["/home"],
routeAction: {
corsPolicy: {
allowCredentials: true,
allowHeaders: ["Allowed content"],
allowMethods: ["GET"],
allowOriginRegexes: ["abc.*"],
allowOrigins: ["Allowed origin"],
exposeHeaders: ["Exposed header"],
maxAge: 30,
disabled: false,
},
faultInjectionPolicy: {
abort: {
httpStatus: 234,
percentage: 5.6,
},
delay: {
fixedDelay: {
seconds: "0",
nanos: 50000,
},
percentage: 7.8,
},
},
requestMirrorPolicy: {
backendService: home.id,
},
retryPolicy: {
numRetries: 4,
perTryTimeout: {
seconds: "30",
},
retryConditions: [
"5xx",
"deadline-exceeded",
],
},
timeout: {
seconds: "20",
nanos: 750000000,
},
urlRewrite: {
hostRewrite: "dev.example.com",
pathPrefixRewrite: "/v1/api/",
},
weightedBackendServices: [{
backendService: home.id,
weight: 400,
headerAction: {
requestHeadersToRemoves: ["RemoveMe"],
requestHeadersToAdds: [{
headerName: "AddMe",
headerValue: "MyValue",
replace: true,
}],
responseHeadersToRemoves: ["RemoveMe"],
responseHeadersToAdds: [{
headerName: "AddMe",
headerValue: "MyValue",
replace: false,
}],
},
}],
},
}],
}],
tests: [{
service: home.id,
host: "hi.com",
path: "/home",
}],
});
import pulumi
import pulumi_gcp as gcp
default = gcp.compute.HealthCheck("default",
name="health-check",
http_health_check={
"port": 80,
})
home = gcp.compute.BackendService("home",
name="home",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default.id,
load_balancing_scheme="INTERNAL_SELF_MANAGED")
urlmap = gcp.compute.URLMap("urlmap",
name="urlmap",
description="a description",
default_service=home.id,
host_rules=[{
"hosts": ["mysite.com"],
"path_matcher": "allpaths",
}],
path_matchers=[{
"name": "allpaths",
"default_service": home.id,
"path_rules": [{
"paths": ["/home"],
"route_action": {
"cors_policy": {
"allow_credentials": True,
"allow_headers": ["Allowed content"],
"allow_methods": ["GET"],
"allow_origin_regexes": ["abc.*"],
"allow_origins": ["Allowed origin"],
"expose_headers": ["Exposed header"],
"max_age": 30,
"disabled": False,
},
"fault_injection_policy": {
"abort": {
"http_status": 234,
"percentage": 5.6,
},
"delay": {
"fixed_delay": {
"seconds": "0",
"nanos": 50000,
},
"percentage": 7.8,
},
},
"request_mirror_policy": {
"backend_service": home.id,
},
"retry_policy": {
"num_retries": 4,
"per_try_timeout": {
"seconds": "30",
},
"retry_conditions": [
"5xx",
"deadline-exceeded",
],
},
"timeout": {
"seconds": "20",
"nanos": 750000000,
},
"url_rewrite": {
"host_rewrite": "dev.example.com",
"path_prefix_rewrite": "/v1/api/",
},
"weighted_backend_services": [{
"backend_service": home.id,
"weight": 400,
"header_action": {
"request_headers_to_removes": ["RemoveMe"],
"request_headers_to_adds": [{
"header_name": "AddMe",
"header_value": "MyValue",
"replace": True,
}],
"response_headers_to_removes": ["RemoveMe"],
"response_headers_to_adds": [{
"header_name": "AddMe",
"header_value": "MyValue",
"replace": False,
}],
},
}],
},
}],
}],
tests=[{
"service": home.id,
"host": "hi.com",
"path": "/home",
}])
package main
import (
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
_, err := compute.NewHealthCheck(ctx, "default", &compute.HealthCheckArgs{
Name: pulumi.String("health-check"),
HttpHealthCheck: &compute.HealthCheckHttpHealthCheckArgs{
Port: pulumi.Int(80),
},
})
if err != nil {
return err
}
home, err := compute.NewBackendService(ctx, "home", &compute.BackendServiceArgs{
Name: pulumi.String("home"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: _default.ID(),
LoadBalancingScheme: pulumi.String("INTERNAL_SELF_MANAGED"),
})
if err != nil {
return err
}
_, err = compute.NewURLMap(ctx, "urlmap", &compute.URLMapArgs{
Name: pulumi.String("urlmap"),
Description: pulumi.String("a description"),
DefaultService: home.ID(),
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("mysite.com"),
},
PathMatcher: pulumi.String("allpaths"),
},
},
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("allpaths"),
DefaultService: home.ID(),
PathRules: compute.URLMapPathMatcherPathRuleArray{
&compute.URLMapPathMatcherPathRuleArgs{
Paths: pulumi.StringArray{
pulumi.String("/home"),
},
RouteAction: &compute.URLMapPathMatcherPathRuleRouteActionArgs{
CorsPolicy: &compute.URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs{
AllowCredentials: pulumi.Bool(true),
AllowHeaders: pulumi.StringArray{
pulumi.String("Allowed content"),
},
AllowMethods: pulumi.StringArray{
pulumi.String("GET"),
},
AllowOriginRegexes: pulumi.StringArray{
pulumi.String("abc.*"),
},
AllowOrigins: pulumi.StringArray{
pulumi.String("Allowed origin"),
},
ExposeHeaders: pulumi.StringArray{
pulumi.String("Exposed header"),
},
MaxAge: pulumi.Int(30),
Disabled: pulumi.Bool(false),
},
FaultInjectionPolicy: &compute.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyArgs{
Abort: &compute.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbortArgs{
HttpStatus: pulumi.Int(234),
Percentage: pulumi.Float64(5.6),
},
Delay: &compute.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayArgs{
FixedDelay: &compute.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs{
Seconds: pulumi.String("0"),
Nanos: pulumi.Int(50000),
},
Percentage: pulumi.Float64(7.8),
},
},
RequestMirrorPolicy: &compute.URLMapPathMatcherPathRuleRouteActionRequestMirrorPolicyArgs{
BackendService: home.ID(),
},
RetryPolicy: &compute.URLMapPathMatcherPathRuleRouteActionRetryPolicyArgs{
NumRetries: pulumi.Int(4),
PerTryTimeout: &compute.URLMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeoutArgs{
Seconds: pulumi.String("30"),
},
RetryConditions: pulumi.StringArray{
pulumi.String("5xx"),
pulumi.String("deadline-exceeded"),
},
},
Timeout: &compute.URLMapPathMatcherPathRuleRouteActionTimeoutArgs{
Seconds: pulumi.String("20"),
Nanos: pulumi.Int(750000000),
},
UrlRewrite: &compute.URLMapPathMatcherPathRuleRouteActionUrlRewriteArgs{
HostRewrite: pulumi.String("dev.example.com"),
PathPrefixRewrite: pulumi.String("/v1/api/"),
},
WeightedBackendServices: compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArray{
&compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs{
BackendService: home.ID(),
Weight: pulumi.Int(400),
HeaderAction: &compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs{
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("RemoveMe"),
},
RequestHeadersToAdds: compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArray{
&compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("AddMe"),
HeaderValue: pulumi.String("MyValue"),
Replace: pulumi.Bool(true),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("RemoveMe"),
},
ResponseHeadersToAdds: compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArray{
&compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("AddMe"),
HeaderValue: pulumi.String("MyValue"),
Replace: pulumi.Bool(false),
},
},
},
},
},
},
},
},
},
},
Tests: compute.URLMapTestArray{
&compute.URLMapTestArgs{
Service: home.ID(),
Host: pulumi.String("hi.com"),
Path: pulumi.String("/home"),
},
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Gcp = Pulumi.Gcp;
return await Deployment.RunAsync(() =>
{
var @default = new Gcp.Compute.HealthCheck("default", new()
{
Name = "health-check",
HttpHealthCheck = new Gcp.Compute.Inputs.HealthCheckHttpHealthCheckArgs
{
Port = 80,
},
});
var home = new Gcp.Compute.BackendService("home", new()
{
Name = "home",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = @default.Id,
LoadBalancingScheme = "INTERNAL_SELF_MANAGED",
});
var urlmap = new Gcp.Compute.URLMap("urlmap", new()
{
Name = "urlmap",
Description = "a description",
DefaultService = home.Id,
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"mysite.com",
},
PathMatcher = "allpaths",
},
},
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "allpaths",
DefaultService = home.Id,
PathRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleArgs
{
Paths = new[]
{
"/home",
},
RouteAction = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionArgs
{
CorsPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs
{
AllowCredentials = true,
AllowHeaders = new[]
{
"Allowed content",
},
AllowMethods = new[]
{
"GET",
},
AllowOriginRegexes = new[]
{
"abc.*",
},
AllowOrigins = new[]
{
"Allowed origin",
},
ExposeHeaders = new[]
{
"Exposed header",
},
MaxAge = 30,
Disabled = false,
},
FaultInjectionPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyArgs
{
Abort = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbortArgs
{
HttpStatus = 234,
Percentage = 5.6,
},
Delay = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayArgs
{
FixedDelay = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs
{
Seconds = "0",
Nanos = 50000,
},
Percentage = 7.8,
},
},
RequestMirrorPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionRequestMirrorPolicyArgs
{
BackendService = home.Id,
},
RetryPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionRetryPolicyArgs
{
NumRetries = 4,
PerTryTimeout = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeoutArgs
{
Seconds = "30",
},
RetryConditions = new[]
{
"5xx",
"deadline-exceeded",
},
},
Timeout = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionTimeoutArgs
{
Seconds = "20",
Nanos = 750000000,
},
UrlRewrite = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionUrlRewriteArgs
{
HostRewrite = "dev.example.com",
PathPrefixRewrite = "/v1/api/",
},
WeightedBackendServices = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs
{
BackendService = home.Id,
Weight = 400,
HeaderAction = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs
{
RequestHeadersToRemoves = new[]
{
"RemoveMe",
},
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
{
HeaderName = "AddMe",
HeaderValue = "MyValue",
Replace = true,
},
},
ResponseHeadersToRemoves = new[]
{
"RemoveMe",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
{
HeaderName = "AddMe",
HeaderValue = "MyValue",
Replace = false,
},
},
},
},
},
},
},
},
},
},
Tests = new[]
{
new Gcp.Compute.Inputs.URLMapTestArgs
{
Service = home.Id,
Host = "hi.com",
Path = "/home",
},
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.gcp.compute.HealthCheck;
import com.pulumi.gcp.compute.HealthCheckArgs;
import com.pulumi.gcp.compute.inputs.HealthCheckHttpHealthCheckArgs;
import com.pulumi.gcp.compute.BackendService;
import com.pulumi.gcp.compute.BackendServiceArgs;
import com.pulumi.gcp.compute.URLMap;
import com.pulumi.gcp.compute.URLMapArgs;
import com.pulumi.gcp.compute.inputs.URLMapHostRuleArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherArgs;
import com.pulumi.gcp.compute.inputs.URLMapTestArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var default_ = new HealthCheck("default", HealthCheckArgs.builder()
.name("health-check")
.httpHealthCheck(HealthCheckHttpHealthCheckArgs.builder()
.port(80)
.build())
.build());
var home = new BackendService("home", BackendServiceArgs.builder()
.name("home")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(default_.id())
.loadBalancingScheme("INTERNAL_SELF_MANAGED")
.build());
var urlmap = new URLMap("urlmap", URLMapArgs.builder()
.name("urlmap")
.description("a description")
.defaultService(home.id())
.hostRules(URLMapHostRuleArgs.builder()
.hosts("mysite.com")
.pathMatcher("allpaths")
.build())
.pathMatchers(URLMapPathMatcherArgs.builder()
.name("allpaths")
.defaultService(home.id())
.pathRules(URLMapPathMatcherPathRuleArgs.builder()
.paths("/home")
.routeAction(URLMapPathMatcherPathRuleRouteActionArgs.builder()
.corsPolicy(URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs.builder()
.allowCredentials(true)
.allowHeaders("Allowed content")
.allowMethods("GET")
.allowOriginRegexes("abc.*")
.allowOrigins("Allowed origin")
.exposeHeaders("Exposed header")
.maxAge(30)
.disabled(false)
.build())
.faultInjectionPolicy(URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyArgs.builder()
.abort(URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbortArgs.builder()
.httpStatus(234)
.percentage(5.6)
.build())
.delay(URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayArgs.builder()
.fixedDelay(URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs.builder()
.seconds(0)
.nanos(50000)
.build())
.percentage(7.8)
.build())
.build())
.requestMirrorPolicy(URLMapPathMatcherPathRuleRouteActionRequestMirrorPolicyArgs.builder()
.backendService(home.id())
.build())
.retryPolicy(URLMapPathMatcherPathRuleRouteActionRetryPolicyArgs.builder()
.numRetries(4)
.perTryTimeout(URLMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeoutArgs.builder()
.seconds(30)
.build())
.retryConditions(
"5xx",
"deadline-exceeded")
.build())
.timeout(URLMapPathMatcherPathRuleRouteActionTimeoutArgs.builder()
.seconds(20)
.nanos(750000000)
.build())
.urlRewrite(URLMapPathMatcherPathRuleRouteActionUrlRewriteArgs.builder()
.hostRewrite("dev.example.com")
.pathPrefixRewrite("/v1/api/")
.build())
.weightedBackendServices(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs.builder()
.backendService(home.id())
.weight(400)
.headerAction(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs.builder()
.requestHeadersToRemoves("RemoveMe")
.requestHeadersToAdds(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs.builder()
.headerName("AddMe")
.headerValue("MyValue")
.replace(true)
.build())
.responseHeadersToRemoves("RemoveMe")
.responseHeadersToAdds(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs.builder()
.headerName("AddMe")
.headerValue("MyValue")
.replace(false)
.build())
.build())
.build())
.build())
.build())
.build())
.tests(URLMapTestArgs.builder()
.service(home.id())
.host("hi.com")
.path("/home")
.build())
.build());
}
}
resources:
urlmap:
type: gcp:compute:URLMap
properties:
name: urlmap
description: a description
defaultService: ${home.id}
hostRules:
- hosts:
- mysite.com
pathMatcher: allpaths
pathMatchers:
- name: allpaths
defaultService: ${home.id}
pathRules:
- paths:
- /home
routeAction:
corsPolicy:
allowCredentials: true
allowHeaders:
- Allowed content
allowMethods:
- GET
allowOriginRegexes:
- abc.*
allowOrigins:
- Allowed origin
exposeHeaders:
- Exposed header
maxAge: 30
disabled: false
faultInjectionPolicy:
abort:
httpStatus: 234
percentage: 5.6
delay:
fixedDelay:
seconds: 0
nanos: 50000
percentage: 7.8
requestMirrorPolicy:
backendService: ${home.id}
retryPolicy:
numRetries: 4
perTryTimeout:
seconds: 30
retryConditions:
- 5xx
- deadline-exceeded
timeout:
seconds: 20
nanos: 7.5e+08
urlRewrite:
hostRewrite: dev.example.com
pathPrefixRewrite: /v1/api/
weightedBackendServices:
- backendService: ${home.id}
weight: 400
headerAction:
requestHeadersToRemoves:
- RemoveMe
requestHeadersToAdds:
- headerName: AddMe
headerValue: MyValue
replace: true
responseHeadersToRemoves:
- RemoveMe
responseHeadersToAdds:
- headerName: AddMe
headerValue: MyValue
replace: false
tests:
- service: ${home.id}
host: hi.com
path: /home
home:
type: gcp:compute:BackendService
properties:
name: home
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${default.id}
loadBalancingScheme: INTERNAL_SELF_MANAGED
default:
type: gcp:compute:HealthCheck
properties:
name: health-check
httpHealthCheck:
port: 80
Url Map Traffic Director Path Partial
import * as pulumi from "@pulumi/pulumi";
import * as gcp from "@pulumi/gcp";
const _default = new gcp.compute.HealthCheck("default", {
name: "health-check",
httpHealthCheck: {
port: 80,
},
});
const home = new gcp.compute.BackendService("home", {
name: "home",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: _default.id,
loadBalancingScheme: "INTERNAL_SELF_MANAGED",
});
const urlmap = new gcp.compute.URLMap("urlmap", {
name: "urlmap",
description: "a description",
defaultService: home.id,
hostRules: [{
hosts: ["mysite.com"],
pathMatcher: "allpaths",
}],
pathMatchers: [{
name: "allpaths",
defaultService: home.id,
pathRules: [{
paths: ["/home"],
routeAction: {
corsPolicy: {
allowCredentials: true,
allowHeaders: ["Allowed content"],
allowMethods: ["GET"],
allowOriginRegexes: ["abc.*"],
allowOrigins: ["Allowed origin"],
exposeHeaders: ["Exposed header"],
maxAge: 30,
disabled: false,
},
weightedBackendServices: [{
backendService: home.id,
weight: 400,
headerAction: {
requestHeadersToRemoves: ["RemoveMe"],
requestHeadersToAdds: [{
headerName: "AddMe",
headerValue: "MyValue",
replace: true,
}],
responseHeadersToRemoves: ["RemoveMe"],
responseHeadersToAdds: [{
headerName: "AddMe",
headerValue: "MyValue",
replace: false,
}],
},
}],
},
}],
}],
tests: [{
service: home.id,
host: "hi.com",
path: "/home",
}],
});
import pulumi
import pulumi_gcp as gcp
default = gcp.compute.HealthCheck("default",
name="health-check",
http_health_check={
"port": 80,
})
home = gcp.compute.BackendService("home",
name="home",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default.id,
load_balancing_scheme="INTERNAL_SELF_MANAGED")
urlmap = gcp.compute.URLMap("urlmap",
name="urlmap",
description="a description",
default_service=home.id,
host_rules=[{
"hosts": ["mysite.com"],
"path_matcher": "allpaths",
}],
path_matchers=[{
"name": "allpaths",
"default_service": home.id,
"path_rules": [{
"paths": ["/home"],
"route_action": {
"cors_policy": {
"allow_credentials": True,
"allow_headers": ["Allowed content"],
"allow_methods": ["GET"],
"allow_origin_regexes": ["abc.*"],
"allow_origins": ["Allowed origin"],
"expose_headers": ["Exposed header"],
"max_age": 30,
"disabled": False,
},
"weighted_backend_services": [{
"backend_service": home.id,
"weight": 400,
"header_action": {
"request_headers_to_removes": ["RemoveMe"],
"request_headers_to_adds": [{
"header_name": "AddMe",
"header_value": "MyValue",
"replace": True,
}],
"response_headers_to_removes": ["RemoveMe"],
"response_headers_to_adds": [{
"header_name": "AddMe",
"header_value": "MyValue",
"replace": False,
}],
},
}],
},
}],
}],
tests=[{
"service": home.id,
"host": "hi.com",
"path": "/home",
}])
package main
import (
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
_, err := compute.NewHealthCheck(ctx, "default", &compute.HealthCheckArgs{
Name: pulumi.String("health-check"),
HttpHealthCheck: &compute.HealthCheckHttpHealthCheckArgs{
Port: pulumi.Int(80),
},
})
if err != nil {
return err
}
home, err := compute.NewBackendService(ctx, "home", &compute.BackendServiceArgs{
Name: pulumi.String("home"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: _default.ID(),
LoadBalancingScheme: pulumi.String("INTERNAL_SELF_MANAGED"),
})
if err != nil {
return err
}
_, err = compute.NewURLMap(ctx, "urlmap", &compute.URLMapArgs{
Name: pulumi.String("urlmap"),
Description: pulumi.String("a description"),
DefaultService: home.ID(),
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("mysite.com"),
},
PathMatcher: pulumi.String("allpaths"),
},
},
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("allpaths"),
DefaultService: home.ID(),
PathRules: compute.URLMapPathMatcherPathRuleArray{
&compute.URLMapPathMatcherPathRuleArgs{
Paths: pulumi.StringArray{
pulumi.String("/home"),
},
RouteAction: &compute.URLMapPathMatcherPathRuleRouteActionArgs{
CorsPolicy: &compute.URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs{
AllowCredentials: pulumi.Bool(true),
AllowHeaders: pulumi.StringArray{
pulumi.String("Allowed content"),
},
AllowMethods: pulumi.StringArray{
pulumi.String("GET"),
},
AllowOriginRegexes: pulumi.StringArray{
pulumi.String("abc.*"),
},
AllowOrigins: pulumi.StringArray{
pulumi.String("Allowed origin"),
},
ExposeHeaders: pulumi.StringArray{
pulumi.String("Exposed header"),
},
MaxAge: pulumi.Int(30),
Disabled: pulumi.Bool(false),
},
WeightedBackendServices: compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArray{
&compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs{
BackendService: home.ID(),
Weight: pulumi.Int(400),
HeaderAction: &compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs{
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("RemoveMe"),
},
RequestHeadersToAdds: compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArray{
&compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("AddMe"),
HeaderValue: pulumi.String("MyValue"),
Replace: pulumi.Bool(true),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("RemoveMe"),
},
ResponseHeadersToAdds: compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArray{
&compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("AddMe"),
HeaderValue: pulumi.String("MyValue"),
Replace: pulumi.Bool(false),
},
},
},
},
},
},
},
},
},
},
Tests: compute.URLMapTestArray{
&compute.URLMapTestArgs{
Service: home.ID(),
Host: pulumi.String("hi.com"),
Path: pulumi.String("/home"),
},
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Gcp = Pulumi.Gcp;
return await Deployment.RunAsync(() =>
{
var @default = new Gcp.Compute.HealthCheck("default", new()
{
Name = "health-check",
HttpHealthCheck = new Gcp.Compute.Inputs.HealthCheckHttpHealthCheckArgs
{
Port = 80,
},
});
var home = new Gcp.Compute.BackendService("home", new()
{
Name = "home",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = @default.Id,
LoadBalancingScheme = "INTERNAL_SELF_MANAGED",
});
var urlmap = new Gcp.Compute.URLMap("urlmap", new()
{
Name = "urlmap",
Description = "a description",
DefaultService = home.Id,
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"mysite.com",
},
PathMatcher = "allpaths",
},
},
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "allpaths",
DefaultService = home.Id,
PathRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleArgs
{
Paths = new[]
{
"/home",
},
RouteAction = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionArgs
{
CorsPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs
{
AllowCredentials = true,
AllowHeaders = new[]
{
"Allowed content",
},
AllowMethods = new[]
{
"GET",
},
AllowOriginRegexes = new[]
{
"abc.*",
},
AllowOrigins = new[]
{
"Allowed origin",
},
ExposeHeaders = new[]
{
"Exposed header",
},
MaxAge = 30,
Disabled = false,
},
WeightedBackendServices = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs
{
BackendService = home.Id,
Weight = 400,
HeaderAction = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs
{
RequestHeadersToRemoves = new[]
{
"RemoveMe",
},
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
{
HeaderName = "AddMe",
HeaderValue = "MyValue",
Replace = true,
},
},
ResponseHeadersToRemoves = new[]
{
"RemoveMe",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
{
HeaderName = "AddMe",
HeaderValue = "MyValue",
Replace = false,
},
},
},
},
},
},
},
},
},
},
Tests = new[]
{
new Gcp.Compute.Inputs.URLMapTestArgs
{
Service = home.Id,
Host = "hi.com",
Path = "/home",
},
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.gcp.compute.HealthCheck;
import com.pulumi.gcp.compute.HealthCheckArgs;
import com.pulumi.gcp.compute.inputs.HealthCheckHttpHealthCheckArgs;
import com.pulumi.gcp.compute.BackendService;
import com.pulumi.gcp.compute.BackendServiceArgs;
import com.pulumi.gcp.compute.URLMap;
import com.pulumi.gcp.compute.URLMapArgs;
import com.pulumi.gcp.compute.inputs.URLMapHostRuleArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherArgs;
import com.pulumi.gcp.compute.inputs.URLMapTestArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var default_ = new HealthCheck("default", HealthCheckArgs.builder()
.name("health-check")
.httpHealthCheck(HealthCheckHttpHealthCheckArgs.builder()
.port(80)
.build())
.build());
var home = new BackendService("home", BackendServiceArgs.builder()
.name("home")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(default_.id())
.loadBalancingScheme("INTERNAL_SELF_MANAGED")
.build());
var urlmap = new URLMap("urlmap", URLMapArgs.builder()
.name("urlmap")
.description("a description")
.defaultService(home.id())
.hostRules(URLMapHostRuleArgs.builder()
.hosts("mysite.com")
.pathMatcher("allpaths")
.build())
.pathMatchers(URLMapPathMatcherArgs.builder()
.name("allpaths")
.defaultService(home.id())
.pathRules(URLMapPathMatcherPathRuleArgs.builder()
.paths("/home")
.routeAction(URLMapPathMatcherPathRuleRouteActionArgs.builder()
.corsPolicy(URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs.builder()
.allowCredentials(true)
.allowHeaders("Allowed content")
.allowMethods("GET")
.allowOriginRegexes("abc.*")
.allowOrigins("Allowed origin")
.exposeHeaders("Exposed header")
.maxAge(30)
.disabled(false)
.build())
.weightedBackendServices(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs.builder()
.backendService(home.id())
.weight(400)
.headerAction(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs.builder()
.requestHeadersToRemoves("RemoveMe")
.requestHeadersToAdds(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs.builder()
.headerName("AddMe")
.headerValue("MyValue")
.replace(true)
.build())
.responseHeadersToRemoves("RemoveMe")
.responseHeadersToAdds(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs.builder()
.headerName("AddMe")
.headerValue("MyValue")
.replace(false)
.build())
.build())
.build())
.build())
.build())
.build())
.tests(URLMapTestArgs.builder()
.service(home.id())
.host("hi.com")
.path("/home")
.build())
.build());
}
}
resources:
urlmap:
type: gcp:compute:URLMap
properties:
name: urlmap
description: a description
defaultService: ${home.id}
hostRules:
- hosts:
- mysite.com
pathMatcher: allpaths
pathMatchers:
- name: allpaths
defaultService: ${home.id}
pathRules:
- paths:
- /home
routeAction:
corsPolicy:
allowCredentials: true
allowHeaders:
- Allowed content
allowMethods:
- GET
allowOriginRegexes:
- abc.*
allowOrigins:
- Allowed origin
exposeHeaders:
- Exposed header
maxAge: 30
disabled: false
weightedBackendServices:
- backendService: ${home.id}
weight: 400
headerAction:
requestHeadersToRemoves:
- RemoveMe
requestHeadersToAdds:
- headerName: AddMe
headerValue: MyValue
replace: true
responseHeadersToRemoves:
- RemoveMe
responseHeadersToAdds:
- headerName: AddMe
headerValue: MyValue
replace: false
tests:
- service: ${home.id}
host: hi.com
path: /home
home:
type: gcp:compute:BackendService
properties:
name: home
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${default.id}
loadBalancingScheme: INTERNAL_SELF_MANAGED
default:
type: gcp:compute:HealthCheck
properties:
name: health-check
httpHealthCheck:
port: 80
Url Map Header Based Routing
import * as pulumi from "@pulumi/pulumi";
import * as gcp from "@pulumi/gcp";
const defaultHttpHealthCheck = new gcp.compute.HttpHealthCheck("default", {
name: "health-check",
requestPath: "/",
checkIntervalSec: 1,
timeoutSec: 1,
});
const _default = new gcp.compute.BackendService("default", {
name: "default",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: defaultHttpHealthCheck.id,
});
const service_a = new gcp.compute.BackendService("service-a", {
name: "service-a",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: defaultHttpHealthCheck.id,
});
const service_b = new gcp.compute.BackendService("service-b", {
name: "service-b",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: defaultHttpHealthCheck.id,
});
const urlmap = new gcp.compute.URLMap("urlmap", {
name: "urlmap",
description: "header-based routing example",
defaultService: _default.id,
hostRules: [{
hosts: ["*"],
pathMatcher: "allpaths",
}],
pathMatchers: [{
name: "allpaths",
defaultService: _default.id,
routeRules: [
{
priority: 1,
service: service_a.id,
matchRules: [{
prefixMatch: "/",
ignoreCase: true,
headerMatches: [{
headerName: "abtest",
exactMatch: "a",
}],
}],
},
{
priority: 2,
service: service_b.id,
matchRules: [{
ignoreCase: true,
prefixMatch: "/",
headerMatches: [{
headerName: "abtest",
exactMatch: "b",
}],
}],
},
],
}],
});
import pulumi
import pulumi_gcp as gcp
default_http_health_check = gcp.compute.HttpHealthCheck("default",
name="health-check",
request_path="/",
check_interval_sec=1,
timeout_sec=1)
default = gcp.compute.BackendService("default",
name="default",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default_http_health_check.id)
service_a = gcp.compute.BackendService("service-a",
name="service-a",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default_http_health_check.id)
service_b = gcp.compute.BackendService("service-b",
name="service-b",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default_http_health_check.id)
urlmap = gcp.compute.URLMap("urlmap",
name="urlmap",
description="header-based routing example",
default_service=default.id,
host_rules=[{
"hosts": ["*"],
"path_matcher": "allpaths",
}],
path_matchers=[{
"name": "allpaths",
"default_service": default.id,
"route_rules": [
{
"priority": 1,
"service": service_a.id,
"match_rules": [{
"prefix_match": "/",
"ignore_case": True,
"header_matches": [{
"header_name": "abtest",
"exact_match": "a",
}],
}],
},
{
"priority": 2,
"service": service_b.id,
"match_rules": [{
"ignore_case": True,
"prefix_match": "/",
"header_matches": [{
"header_name": "abtest",
"exact_match": "b",
}],
}],
},
],
}])
package main
import (
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
defaultHttpHealthCheck, err := compute.NewHttpHealthCheck(ctx, "default", &compute.HttpHealthCheckArgs{
Name: pulumi.String("health-check"),
RequestPath: pulumi.String("/"),
CheckIntervalSec: pulumi.Int(1),
TimeoutSec: pulumi.Int(1),
})
if err != nil {
return err
}
_, err = compute.NewBackendService(ctx, "default", &compute.BackendServiceArgs{
Name: pulumi.String("default"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: defaultHttpHealthCheck.ID(),
})
if err != nil {
return err
}
_, err = compute.NewBackendService(ctx, "service-a", &compute.BackendServiceArgs{
Name: pulumi.String("service-a"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: defaultHttpHealthCheck.ID(),
})
if err != nil {
return err
}
_, err = compute.NewBackendService(ctx, "service-b", &compute.BackendServiceArgs{
Name: pulumi.String("service-b"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: defaultHttpHealthCheck.ID(),
})
if err != nil {
return err
}
_, err = compute.NewURLMap(ctx, "urlmap", &compute.URLMapArgs{
Name: pulumi.String("urlmap"),
Description: pulumi.String("header-based routing example"),
DefaultService: _default.ID(),
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("*"),
},
PathMatcher: pulumi.String("allpaths"),
},
},
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("allpaths"),
DefaultService: _default.ID(),
RouteRules: compute.URLMapPathMatcherRouteRuleArray{
&compute.URLMapPathMatcherRouteRuleArgs{
Priority: pulumi.Int(1),
Service: service_a.ID(),
MatchRules: compute.URLMapPathMatcherRouteRuleMatchRuleArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleArgs{
PrefixMatch: pulumi.String("/"),
IgnoreCase: pulumi.Bool(true),
HeaderMatches: compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs{
HeaderName: pulumi.String("abtest"),
ExactMatch: pulumi.String("a"),
},
},
},
},
},
&compute.URLMapPathMatcherRouteRuleArgs{
Priority: pulumi.Int(2),
Service: service_b.ID(),
MatchRules: compute.URLMapPathMatcherRouteRuleMatchRuleArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleArgs{
IgnoreCase: pulumi.Bool(true),
PrefixMatch: pulumi.String("/"),
HeaderMatches: compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs{
HeaderName: pulumi.String("abtest"),
ExactMatch: pulumi.String("b"),
},
},
},
},
},
},
},
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Gcp = Pulumi.Gcp;
return await Deployment.RunAsync(() =>
{
var defaultHttpHealthCheck = new Gcp.Compute.HttpHealthCheck("default", new()
{
Name = "health-check",
RequestPath = "/",
CheckIntervalSec = 1,
TimeoutSec = 1,
});
var @default = new Gcp.Compute.BackendService("default", new()
{
Name = "default",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = defaultHttpHealthCheck.Id,
});
var service_a = new Gcp.Compute.BackendService("service-a", new()
{
Name = "service-a",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = defaultHttpHealthCheck.Id,
});
var service_b = new Gcp.Compute.BackendService("service-b", new()
{
Name = "service-b",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = defaultHttpHealthCheck.Id,
});
var urlmap = new Gcp.Compute.URLMap("urlmap", new()
{
Name = "urlmap",
Description = "header-based routing example",
DefaultService = @default.Id,
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"*",
},
PathMatcher = "allpaths",
},
},
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "allpaths",
DefaultService = @default.Id,
RouteRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleArgs
{
Priority = 1,
Service = service_a.Id,
MatchRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleArgs
{
PrefixMatch = "/",
IgnoreCase = true,
HeaderMatches = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs
{
HeaderName = "abtest",
ExactMatch = "a",
},
},
},
},
},
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleArgs
{
Priority = 2,
Service = service_b.Id,
MatchRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleArgs
{
IgnoreCase = true,
PrefixMatch = "/",
HeaderMatches = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs
{
HeaderName = "abtest",
ExactMatch = "b",
},
},
},
},
},
},
},
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.gcp.compute.HttpHealthCheck;
import com.pulumi.gcp.compute.HttpHealthCheckArgs;
import com.pulumi.gcp.compute.BackendService;
import com.pulumi.gcp.compute.BackendServiceArgs;
import com.pulumi.gcp.compute.URLMap;
import com.pulumi.gcp.compute.URLMapArgs;
import com.pulumi.gcp.compute.inputs.URLMapHostRuleArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var defaultHttpHealthCheck = new HttpHealthCheck("defaultHttpHealthCheck", HttpHealthCheckArgs.builder()
.name("health-check")
.requestPath("/")
.checkIntervalSec(1)
.timeoutSec(1)
.build());
var default_ = new BackendService("default", BackendServiceArgs.builder()
.name("default")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(defaultHttpHealthCheck.id())
.build());
var service_a = new BackendService("service-a", BackendServiceArgs.builder()
.name("service-a")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(defaultHttpHealthCheck.id())
.build());
var service_b = new BackendService("service-b", BackendServiceArgs.builder()
.name("service-b")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(defaultHttpHealthCheck.id())
.build());
var urlmap = new URLMap("urlmap", URLMapArgs.builder()
.name("urlmap")
.description("header-based routing example")
.defaultService(default_.id())
.hostRules(URLMapHostRuleArgs.builder()
.hosts("*")
.pathMatcher("allpaths")
.build())
.pathMatchers(URLMapPathMatcherArgs.builder()
.name("allpaths")
.defaultService(default_.id())
.routeRules(
URLMapPathMatcherRouteRuleArgs.builder()
.priority(1)
.service(service_a.id())
.matchRules(URLMapPathMatcherRouteRuleMatchRuleArgs.builder()
.prefixMatch("/")
.ignoreCase(true)
.headerMatches(URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs.builder()
.headerName("abtest")
.exactMatch("a")
.build())
.build())
.build(),
URLMapPathMatcherRouteRuleArgs.builder()
.priority(2)
.service(service_b.id())
.matchRules(URLMapPathMatcherRouteRuleMatchRuleArgs.builder()
.ignoreCase(true)
.prefixMatch("/")
.headerMatches(URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs.builder()
.headerName("abtest")
.exactMatch("b")
.build())
.build())
.build())
.build())
.build());
}
}
resources:
urlmap:
type: gcp:compute:URLMap
properties:
name: urlmap
description: header-based routing example
defaultService: ${default.id}
hostRules:
- hosts:
- '*'
pathMatcher: allpaths
pathMatchers:
- name: allpaths
defaultService: ${default.id}
routeRules:
- priority: 1
service: ${["service-a"].id}
matchRules:
- prefixMatch: /
ignoreCase: true
headerMatches:
- headerName: abtest
exactMatch: a
- priority: 2
service: ${["service-b"].id}
matchRules:
- ignoreCase: true
prefixMatch: /
headerMatches:
- headerName: abtest
exactMatch: b
default:
type: gcp:compute:BackendService
properties:
name: default
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${defaultHttpHealthCheck.id}
service-a:
type: gcp:compute:BackendService
properties:
name: service-a
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${defaultHttpHealthCheck.id}
service-b:
type: gcp:compute:BackendService
properties:
name: service-b
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${defaultHttpHealthCheck.id}
defaultHttpHealthCheck:
type: gcp:compute:HttpHealthCheck
name: default
properties:
name: health-check
requestPath: /
checkIntervalSec: 1
timeoutSec: 1
Url Map Parameter Based Routing
import * as pulumi from "@pulumi/pulumi";
import * as gcp from "@pulumi/gcp";
const defaultHttpHealthCheck = new gcp.compute.HttpHealthCheck("default", {
name: "health-check",
requestPath: "/",
checkIntervalSec: 1,
timeoutSec: 1,
});
const _default = new gcp.compute.BackendService("default", {
name: "default",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: defaultHttpHealthCheck.id,
});
const service_a = new gcp.compute.BackendService("service-a", {
name: "service-a",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: defaultHttpHealthCheck.id,
});
const service_b = new gcp.compute.BackendService("service-b", {
name: "service-b",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
healthChecks: defaultHttpHealthCheck.id,
});
const urlmap = new gcp.compute.URLMap("urlmap", {
name: "urlmap",
description: "parameter-based routing example",
defaultService: _default.id,
hostRules: [{
hosts: ["*"],
pathMatcher: "allpaths",
}],
pathMatchers: [{
name: "allpaths",
defaultService: _default.id,
routeRules: [
{
priority: 1,
service: service_a.id,
matchRules: [{
prefixMatch: "/",
ignoreCase: true,
queryParameterMatches: [{
name: "abtest",
exactMatch: "a",
}],
}],
},
{
priority: 2,
service: service_b.id,
matchRules: [{
ignoreCase: true,
prefixMatch: "/",
queryParameterMatches: [{
name: "abtest",
exactMatch: "b",
}],
}],
},
],
}],
});
import pulumi
import pulumi_gcp as gcp
default_http_health_check = gcp.compute.HttpHealthCheck("default",
name="health-check",
request_path="/",
check_interval_sec=1,
timeout_sec=1)
default = gcp.compute.BackendService("default",
name="default",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default_http_health_check.id)
service_a = gcp.compute.BackendService("service-a",
name="service-a",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default_http_health_check.id)
service_b = gcp.compute.BackendService("service-b",
name="service-b",
port_name="http",
protocol="HTTP",
timeout_sec=10,
health_checks=default_http_health_check.id)
urlmap = gcp.compute.URLMap("urlmap",
name="urlmap",
description="parameter-based routing example",
default_service=default.id,
host_rules=[{
"hosts": ["*"],
"path_matcher": "allpaths",
}],
path_matchers=[{
"name": "allpaths",
"default_service": default.id,
"route_rules": [
{
"priority": 1,
"service": service_a.id,
"match_rules": [{
"prefix_match": "/",
"ignore_case": True,
"query_parameter_matches": [{
"name": "abtest",
"exact_match": "a",
}],
}],
},
{
"priority": 2,
"service": service_b.id,
"match_rules": [{
"ignore_case": True,
"prefix_match": "/",
"query_parameter_matches": [{
"name": "abtest",
"exact_match": "b",
}],
}],
},
],
}])
package main
import (
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
defaultHttpHealthCheck, err := compute.NewHttpHealthCheck(ctx, "default", &compute.HttpHealthCheckArgs{
Name: pulumi.String("health-check"),
RequestPath: pulumi.String("/"),
CheckIntervalSec: pulumi.Int(1),
TimeoutSec: pulumi.Int(1),
})
if err != nil {
return err
}
_, err = compute.NewBackendService(ctx, "default", &compute.BackendServiceArgs{
Name: pulumi.String("default"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: defaultHttpHealthCheck.ID(),
})
if err != nil {
return err
}
_, err = compute.NewBackendService(ctx, "service-a", &compute.BackendServiceArgs{
Name: pulumi.String("service-a"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: defaultHttpHealthCheck.ID(),
})
if err != nil {
return err
}
_, err = compute.NewBackendService(ctx, "service-b", &compute.BackendServiceArgs{
Name: pulumi.String("service-b"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
HealthChecks: defaultHttpHealthCheck.ID(),
})
if err != nil {
return err
}
_, err = compute.NewURLMap(ctx, "urlmap", &compute.URLMapArgs{
Name: pulumi.String("urlmap"),
Description: pulumi.String("parameter-based routing example"),
DefaultService: _default.ID(),
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("*"),
},
PathMatcher: pulumi.String("allpaths"),
},
},
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("allpaths"),
DefaultService: _default.ID(),
RouteRules: compute.URLMapPathMatcherRouteRuleArray{
&compute.URLMapPathMatcherRouteRuleArgs{
Priority: pulumi.Int(1),
Service: service_a.ID(),
MatchRules: compute.URLMapPathMatcherRouteRuleMatchRuleArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleArgs{
PrefixMatch: pulumi.String("/"),
IgnoreCase: pulumi.Bool(true),
QueryParameterMatches: compute.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs{
Name: pulumi.String("abtest"),
ExactMatch: pulumi.String("a"),
},
},
},
},
},
&compute.URLMapPathMatcherRouteRuleArgs{
Priority: pulumi.Int(2),
Service: service_b.ID(),
MatchRules: compute.URLMapPathMatcherRouteRuleMatchRuleArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleArgs{
IgnoreCase: pulumi.Bool(true),
PrefixMatch: pulumi.String("/"),
QueryParameterMatches: compute.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs{
Name: pulumi.String("abtest"),
ExactMatch: pulumi.String("b"),
},
},
},
},
},
},
},
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Gcp = Pulumi.Gcp;
return await Deployment.RunAsync(() =>
{
var defaultHttpHealthCheck = new Gcp.Compute.HttpHealthCheck("default", new()
{
Name = "health-check",
RequestPath = "/",
CheckIntervalSec = 1,
TimeoutSec = 1,
});
var @default = new Gcp.Compute.BackendService("default", new()
{
Name = "default",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = defaultHttpHealthCheck.Id,
});
var service_a = new Gcp.Compute.BackendService("service-a", new()
{
Name = "service-a",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = defaultHttpHealthCheck.Id,
});
var service_b = new Gcp.Compute.BackendService("service-b", new()
{
Name = "service-b",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
HealthChecks = defaultHttpHealthCheck.Id,
});
var urlmap = new Gcp.Compute.URLMap("urlmap", new()
{
Name = "urlmap",
Description = "parameter-based routing example",
DefaultService = @default.Id,
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"*",
},
PathMatcher = "allpaths",
},
},
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "allpaths",
DefaultService = @default.Id,
RouteRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleArgs
{
Priority = 1,
Service = service_a.Id,
MatchRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleArgs
{
PrefixMatch = "/",
IgnoreCase = true,
QueryParameterMatches = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs
{
Name = "abtest",
ExactMatch = "a",
},
},
},
},
},
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleArgs
{
Priority = 2,
Service = service_b.Id,
MatchRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleArgs
{
IgnoreCase = true,
PrefixMatch = "/",
QueryParameterMatches = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs
{
Name = "abtest",
ExactMatch = "b",
},
},
},
},
},
},
},
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.gcp.compute.HttpHealthCheck;
import com.pulumi.gcp.compute.HttpHealthCheckArgs;
import com.pulumi.gcp.compute.BackendService;
import com.pulumi.gcp.compute.BackendServiceArgs;
import com.pulumi.gcp.compute.URLMap;
import com.pulumi.gcp.compute.URLMapArgs;
import com.pulumi.gcp.compute.inputs.URLMapHostRuleArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var defaultHttpHealthCheck = new HttpHealthCheck("defaultHttpHealthCheck", HttpHealthCheckArgs.builder()
.name("health-check")
.requestPath("/")
.checkIntervalSec(1)
.timeoutSec(1)
.build());
var default_ = new BackendService("default", BackendServiceArgs.builder()
.name("default")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(defaultHttpHealthCheck.id())
.build());
var service_a = new BackendService("service-a", BackendServiceArgs.builder()
.name("service-a")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(defaultHttpHealthCheck.id())
.build());
var service_b = new BackendService("service-b", BackendServiceArgs.builder()
.name("service-b")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.healthChecks(defaultHttpHealthCheck.id())
.build());
var urlmap = new URLMap("urlmap", URLMapArgs.builder()
.name("urlmap")
.description("parameter-based routing example")
.defaultService(default_.id())
.hostRules(URLMapHostRuleArgs.builder()
.hosts("*")
.pathMatcher("allpaths")
.build())
.pathMatchers(URLMapPathMatcherArgs.builder()
.name("allpaths")
.defaultService(default_.id())
.routeRules(
URLMapPathMatcherRouteRuleArgs.builder()
.priority(1)
.service(service_a.id())
.matchRules(URLMapPathMatcherRouteRuleMatchRuleArgs.builder()
.prefixMatch("/")
.ignoreCase(true)
.queryParameterMatches(URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs.builder()
.name("abtest")
.exactMatch("a")
.build())
.build())
.build(),
URLMapPathMatcherRouteRuleArgs.builder()
.priority(2)
.service(service_b.id())
.matchRules(URLMapPathMatcherRouteRuleMatchRuleArgs.builder()
.ignoreCase(true)
.prefixMatch("/")
.queryParameterMatches(URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs.builder()
.name("abtest")
.exactMatch("b")
.build())
.build())
.build())
.build())
.build());
}
}
resources:
urlmap:
type: gcp:compute:URLMap
properties:
name: urlmap
description: parameter-based routing example
defaultService: ${default.id}
hostRules:
- hosts:
- '*'
pathMatcher: allpaths
pathMatchers:
- name: allpaths
defaultService: ${default.id}
routeRules:
- priority: 1
service: ${["service-a"].id}
matchRules:
- prefixMatch: /
ignoreCase: true
queryParameterMatches:
- name: abtest
exactMatch: a
- priority: 2
service: ${["service-b"].id}
matchRules:
- ignoreCase: true
prefixMatch: /
queryParameterMatches:
- name: abtest
exactMatch: b
default:
type: gcp:compute:BackendService
properties:
name: default
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${defaultHttpHealthCheck.id}
service-a:
type: gcp:compute:BackendService
properties:
name: service-a
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${defaultHttpHealthCheck.id}
service-b:
type: gcp:compute:BackendService
properties:
name: service-b
portName: http
protocol: HTTP
timeoutSec: 10
healthChecks: ${defaultHttpHealthCheck.id}
defaultHttpHealthCheck:
type: gcp:compute:HttpHealthCheck
name: default
properties:
name: health-check
requestPath: /
checkIntervalSec: 1
timeoutSec: 1
Url Map Path Template Match
import * as pulumi from "@pulumi/pulumi";
import * as gcp from "@pulumi/gcp";
const _default = new gcp.compute.HttpHealthCheck("default", {
name: "health-check",
requestPath: "/",
checkIntervalSec: 1,
timeoutSec: 1,
});
const cart_backend = new gcp.compute.BackendService("cart-backend", {
name: "cart-service",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
loadBalancingScheme: "EXTERNAL_MANAGED",
healthChecks: _default.id,
});
const user_backend = new gcp.compute.BackendService("user-backend", {
name: "user-service",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
loadBalancingScheme: "EXTERNAL_MANAGED",
healthChecks: _default.id,
});
const staticBucket = new gcp.storage.Bucket("static", {
name: "static-asset-bucket",
location: "US",
});
const static = new gcp.compute.BackendBucket("static", {
name: "static-asset-backend-bucket",
bucketName: staticBucket.name,
enableCdn: true,
});
const urlmap = new gcp.compute.URLMap("urlmap", {
name: "urlmap",
description: "a description",
defaultService: static.id,
hostRules: [{
hosts: ["mysite.com"],
pathMatcher: "mysite",
}],
pathMatchers: [{
name: "mysite",
defaultService: static.id,
routeRules: [
{
matchRules: [{
pathTemplateMatch: "/xyzwebservices/v2/xyz/users/{username=*}/carts/{cartid=**}",
}],
service: cart_backend.id,
priority: 1,
routeAction: {
urlRewrite: {
pathTemplateRewrite: "/{username}-{cartid}/",
},
},
},
{
matchRules: [{
pathTemplateMatch: "/xyzwebservices/v2/xyz/users/*/accountinfo/*",
}],
service: user_backend.id,
priority: 2,
},
],
}],
});
import pulumi
import pulumi_gcp as gcp
default = gcp.compute.HttpHealthCheck("default",
name="health-check",
request_path="/",
check_interval_sec=1,
timeout_sec=1)
cart_backend = gcp.compute.BackendService("cart-backend",
name="cart-service",
port_name="http",
protocol="HTTP",
timeout_sec=10,
load_balancing_scheme="EXTERNAL_MANAGED",
health_checks=default.id)
user_backend = gcp.compute.BackendService("user-backend",
name="user-service",
port_name="http",
protocol="HTTP",
timeout_sec=10,
load_balancing_scheme="EXTERNAL_MANAGED",
health_checks=default.id)
static_bucket = gcp.storage.Bucket("static",
name="static-asset-bucket",
location="US")
static = gcp.compute.BackendBucket("static",
name="static-asset-backend-bucket",
bucket_name=static_bucket.name,
enable_cdn=True)
urlmap = gcp.compute.URLMap("urlmap",
name="urlmap",
description="a description",
default_service=static.id,
host_rules=[{
"hosts": ["mysite.com"],
"path_matcher": "mysite",
}],
path_matchers=[{
"name": "mysite",
"default_service": static.id,
"route_rules": [
{
"match_rules": [{
"path_template_match": "/xyzwebservices/v2/xyz/users/{username=*}/carts/{cartid=**}",
}],
"service": cart_backend.id,
"priority": 1,
"route_action": {
"url_rewrite": {
"path_template_rewrite": "/{username}-{cartid}/",
},
},
},
{
"match_rules": [{
"path_template_match": "/xyzwebservices/v2/xyz/users/*/accountinfo/*",
}],
"service": user_backend.id,
"priority": 2,
},
],
}])
package main
import (
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/storage"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
_, err := compute.NewHttpHealthCheck(ctx, "default", &compute.HttpHealthCheckArgs{
Name: pulumi.String("health-check"),
RequestPath: pulumi.String("/"),
CheckIntervalSec: pulumi.Int(1),
TimeoutSec: pulumi.Int(1),
})
if err != nil {
return err
}
_, err = compute.NewBackendService(ctx, "cart-backend", &compute.BackendServiceArgs{
Name: pulumi.String("cart-service"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
LoadBalancingScheme: pulumi.String("EXTERNAL_MANAGED"),
HealthChecks: _default.ID(),
})
if err != nil {
return err
}
_, err = compute.NewBackendService(ctx, "user-backend", &compute.BackendServiceArgs{
Name: pulumi.String("user-service"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
LoadBalancingScheme: pulumi.String("EXTERNAL_MANAGED"),
HealthChecks: _default.ID(),
})
if err != nil {
return err
}
staticBucket, err := storage.NewBucket(ctx, "static", &storage.BucketArgs{
Name: pulumi.String("static-asset-bucket"),
Location: pulumi.String("US"),
})
if err != nil {
return err
}
static, err := compute.NewBackendBucket(ctx, "static", &compute.BackendBucketArgs{
Name: pulumi.String("static-asset-backend-bucket"),
BucketName: staticBucket.Name,
EnableCdn: pulumi.Bool(true),
})
if err != nil {
return err
}
_, err = compute.NewURLMap(ctx, "urlmap", &compute.URLMapArgs{
Name: pulumi.String("urlmap"),
Description: pulumi.String("a description"),
DefaultService: static.ID(),
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("mysite.com"),
},
PathMatcher: pulumi.String("mysite"),
},
},
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("mysite"),
DefaultService: static.ID(),
RouteRules: compute.URLMapPathMatcherRouteRuleArray{
&compute.URLMapPathMatcherRouteRuleArgs{
MatchRules: compute.URLMapPathMatcherRouteRuleMatchRuleArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleArgs{
PathTemplateMatch: pulumi.String("/xyzwebservices/v2/xyz/users/{username=*}/carts/{cartid=**}"),
},
},
Service: cart_backend.ID(),
Priority: pulumi.Int(1),
RouteAction: &compute.URLMapPathMatcherRouteRuleRouteActionArgs{
UrlRewrite: &compute.URLMapPathMatcherRouteRuleRouteActionUrlRewriteArgs{
PathTemplateRewrite: pulumi.String("/{username}-{cartid}/"),
},
},
},
&compute.URLMapPathMatcherRouteRuleArgs{
MatchRules: compute.URLMapPathMatcherRouteRuleMatchRuleArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleArgs{
PathTemplateMatch: pulumi.String("/xyzwebservices/v2/xyz/users/*/accountinfo/*"),
},
},
Service: user_backend.ID(),
Priority: pulumi.Int(2),
},
},
},
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Gcp = Pulumi.Gcp;
return await Deployment.RunAsync(() =>
{
var @default = new Gcp.Compute.HttpHealthCheck("default", new()
{
Name = "health-check",
RequestPath = "/",
CheckIntervalSec = 1,
TimeoutSec = 1,
});
var cart_backend = new Gcp.Compute.BackendService("cart-backend", new()
{
Name = "cart-service",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
LoadBalancingScheme = "EXTERNAL_MANAGED",
HealthChecks = @default.Id,
});
var user_backend = new Gcp.Compute.BackendService("user-backend", new()
{
Name = "user-service",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
LoadBalancingScheme = "EXTERNAL_MANAGED",
HealthChecks = @default.Id,
});
var staticBucket = new Gcp.Storage.Bucket("static", new()
{
Name = "static-asset-bucket",
Location = "US",
});
var @static = new Gcp.Compute.BackendBucket("static", new()
{
Name = "static-asset-backend-bucket",
BucketName = staticBucket.Name,
EnableCdn = true,
});
var urlmap = new Gcp.Compute.URLMap("urlmap", new()
{
Name = "urlmap",
Description = "a description",
DefaultService = @static.Id,
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"mysite.com",
},
PathMatcher = "mysite",
},
},
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "mysite",
DefaultService = @static.Id,
RouteRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleArgs
{
MatchRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleArgs
{
PathTemplateMatch = "/xyzwebservices/v2/xyz/users/{username=*}/carts/{cartid=**}",
},
},
Service = cart_backend.Id,
Priority = 1,
RouteAction = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionArgs
{
UrlRewrite = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionUrlRewriteArgs
{
PathTemplateRewrite = "/{username}-{cartid}/",
},
},
},
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleArgs
{
MatchRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleArgs
{
PathTemplateMatch = "/xyzwebservices/v2/xyz/users/*/accountinfo/*",
},
},
Service = user_backend.Id,
Priority = 2,
},
},
},
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.gcp.compute.HttpHealthCheck;
import com.pulumi.gcp.compute.HttpHealthCheckArgs;
import com.pulumi.gcp.compute.BackendService;
import com.pulumi.gcp.compute.BackendServiceArgs;
import com.pulumi.gcp.storage.Bucket;
import com.pulumi.gcp.storage.BucketArgs;
import com.pulumi.gcp.compute.BackendBucket;
import com.pulumi.gcp.compute.BackendBucketArgs;
import com.pulumi.gcp.compute.URLMap;
import com.pulumi.gcp.compute.URLMapArgs;
import com.pulumi.gcp.compute.inputs.URLMapHostRuleArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var default_ = new HttpHealthCheck("default", HttpHealthCheckArgs.builder()
.name("health-check")
.requestPath("/")
.checkIntervalSec(1)
.timeoutSec(1)
.build());
var cart_backend = new BackendService("cart-backend", BackendServiceArgs.builder()
.name("cart-service")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.loadBalancingScheme("EXTERNAL_MANAGED")
.healthChecks(default_.id())
.build());
var user_backend = new BackendService("user-backend", BackendServiceArgs.builder()
.name("user-service")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.loadBalancingScheme("EXTERNAL_MANAGED")
.healthChecks(default_.id())
.build());
var staticBucket = new Bucket("staticBucket", BucketArgs.builder()
.name("static-asset-bucket")
.location("US")
.build());
var static_ = new BackendBucket("static", BackendBucketArgs.builder()
.name("static-asset-backend-bucket")
.bucketName(staticBucket.name())
.enableCdn(true)
.build());
var urlmap = new URLMap("urlmap", URLMapArgs.builder()
.name("urlmap")
.description("a description")
.defaultService(static_.id())
.hostRules(URLMapHostRuleArgs.builder()
.hosts("mysite.com")
.pathMatcher("mysite")
.build())
.pathMatchers(URLMapPathMatcherArgs.builder()
.name("mysite")
.defaultService(static_.id())
.routeRules(
URLMapPathMatcherRouteRuleArgs.builder()
.matchRules(URLMapPathMatcherRouteRuleMatchRuleArgs.builder()
.pathTemplateMatch("/xyzwebservices/v2/xyz/users/{username=*}/carts/{cartid=**}")
.build())
.service(cart_backend.id())
.priority(1)
.routeAction(URLMapPathMatcherRouteRuleRouteActionArgs.builder()
.urlRewrite(URLMapPathMatcherRouteRuleRouteActionUrlRewriteArgs.builder()
.pathTemplateRewrite("/{username}-{cartid}/")
.build())
.build())
.build(),
URLMapPathMatcherRouteRuleArgs.builder()
.matchRules(URLMapPathMatcherRouteRuleMatchRuleArgs.builder()
.pathTemplateMatch("/xyzwebservices/v2/xyz/users/*/accountinfo/*")
.build())
.service(user_backend.id())
.priority(2)
.build())
.build())
.build());
}
}
resources:
urlmap:
type: gcp:compute:URLMap
properties:
name: urlmap
description: a description
defaultService: ${static.id}
hostRules:
- hosts:
- mysite.com
pathMatcher: mysite
pathMatchers:
- name: mysite
defaultService: ${static.id}
routeRules:
- matchRules:
- pathTemplateMatch: /xyzwebservices/v2/xyz/users/{username=*}/carts/{cartid=**}
service: ${["cart-backend"].id}
priority: 1
routeAction:
urlRewrite:
pathTemplateRewrite: /{username}-{cartid}/
- matchRules:
- pathTemplateMatch: /xyzwebservices/v2/xyz/users/*/accountinfo/*
service: ${["user-backend"].id}
priority: 2
cart-backend:
type: gcp:compute:BackendService
properties:
name: cart-service
portName: http
protocol: HTTP
timeoutSec: 10
loadBalancingScheme: EXTERNAL_MANAGED
healthChecks: ${default.id}
user-backend:
type: gcp:compute:BackendService
properties:
name: user-service
portName: http
protocol: HTTP
timeoutSec: 10
loadBalancingScheme: EXTERNAL_MANAGED
healthChecks: ${default.id}
default:
type: gcp:compute:HttpHealthCheck
properties:
name: health-check
requestPath: /
checkIntervalSec: 1
timeoutSec: 1
static:
type: gcp:compute:BackendBucket
properties:
name: static-asset-backend-bucket
bucketName: ${staticBucket.name}
enableCdn: true
staticBucket:
type: gcp:storage:Bucket
name: static
properties:
name: static-asset-bucket
location: US
Url Map Custom Error Response Policy
import * as pulumi from "@pulumi/pulumi";
import * as gcp from "@pulumi/gcp";
const _default = new gcp.compute.HttpHealthCheck("default", {
name: "health-check",
requestPath: "/",
checkIntervalSec: 1,
timeoutSec: 1,
});
const example = new gcp.compute.BackendService("example", {
name: "login",
portName: "http",
protocol: "HTTP",
timeoutSec: 10,
loadBalancingScheme: "EXTERNAL_MANAGED",
healthChecks: _default.id,
});
const errorBucket = new gcp.storage.Bucket("error", {
name: "static-asset-bucket",
location: "US",
});
const error = new gcp.compute.BackendBucket("error", {
name: "error-backend-bucket",
bucketName: errorBucket.name,
enableCdn: true,
});
const urlmap = new gcp.compute.URLMap("urlmap", {
name: "urlmap",
description: "a description",
defaultService: example.id,
defaultCustomErrorResponsePolicy: {
errorResponseRules: [{
matchResponseCodes: ["5xx"],
path: "/internal_error.html",
overrideResponseCode: 502,
}],
errorService: error.id,
},
hostRules: [{
hosts: ["mysite.com"],
pathMatcher: "mysite",
}],
pathMatchers: [{
name: "mysite",
defaultService: example.id,
defaultCustomErrorResponsePolicy: {
errorResponseRules: [
{
matchResponseCodes: [
"4xx",
"5xx",
],
path: "/login_error.html",
overrideResponseCode: 404,
},
{
matchResponseCodes: ["503"],
path: "/bad_gateway.html",
overrideResponseCode: 502,
},
],
errorService: error.id,
},
pathRules: [{
paths: ["/private/*"],
service: example.id,
customErrorResponsePolicy: {
errorResponseRules: [{
matchResponseCodes: ["4xx"],
path: "/login.html",
overrideResponseCode: 401,
}],
errorService: error.id,
},
}],
}],
});
import pulumi
import pulumi_gcp as gcp
default = gcp.compute.HttpHealthCheck("default",
name="health-check",
request_path="/",
check_interval_sec=1,
timeout_sec=1)
example = gcp.compute.BackendService("example",
name="login",
port_name="http",
protocol="HTTP",
timeout_sec=10,
load_balancing_scheme="EXTERNAL_MANAGED",
health_checks=default.id)
error_bucket = gcp.storage.Bucket("error",
name="static-asset-bucket",
location="US")
error = gcp.compute.BackendBucket("error",
name="error-backend-bucket",
bucket_name=error_bucket.name,
enable_cdn=True)
urlmap = gcp.compute.URLMap("urlmap",
name="urlmap",
description="a description",
default_service=example.id,
default_custom_error_response_policy={
"error_response_rules": [{
"match_response_codes": ["5xx"],
"path": "/internal_error.html",
"override_response_code": 502,
}],
"error_service": error.id,
},
host_rules=[{
"hosts": ["mysite.com"],
"path_matcher": "mysite",
}],
path_matchers=[{
"name": "mysite",
"default_service": example.id,
"default_custom_error_response_policy": {
"error_response_rules": [
{
"match_response_codes": [
"4xx",
"5xx",
],
"path": "/login_error.html",
"override_response_code": 404,
},
{
"match_response_codes": ["503"],
"path": "/bad_gateway.html",
"override_response_code": 502,
},
],
"error_service": error.id,
},
"path_rules": [{
"paths": ["/private/*"],
"service": example.id,
"custom_error_response_policy": {
"error_response_rules": [{
"match_response_codes": ["4xx"],
"path": "/login.html",
"override_response_code": 401,
}],
"error_service": error.id,
},
}],
}])
package main
import (
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/compute"
"github.com/pulumi/pulumi-gcp/sdk/v8/go/gcp/storage"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
_, err := compute.NewHttpHealthCheck(ctx, "default", &compute.HttpHealthCheckArgs{
Name: pulumi.String("health-check"),
RequestPath: pulumi.String("/"),
CheckIntervalSec: pulumi.Int(1),
TimeoutSec: pulumi.Int(1),
})
if err != nil {
return err
}
example, err := compute.NewBackendService(ctx, "example", &compute.BackendServiceArgs{
Name: pulumi.String("login"),
PortName: pulumi.String("http"),
Protocol: pulumi.String("HTTP"),
TimeoutSec: pulumi.Int(10),
LoadBalancingScheme: pulumi.String("EXTERNAL_MANAGED"),
HealthChecks: _default.ID(),
})
if err != nil {
return err
}
errorBucket, err := storage.NewBucket(ctx, "error", &storage.BucketArgs{
Name: pulumi.String("static-asset-bucket"),
Location: pulumi.String("US"),
})
if err != nil {
return err
}
error, err := compute.NewBackendBucket(ctx, "error", &compute.BackendBucketArgs{
Name: pulumi.String("error-backend-bucket"),
BucketName: errorBucket.Name,
EnableCdn: pulumi.Bool(true),
})
if err != nil {
return err
}
_, err = compute.NewURLMap(ctx, "urlmap", &compute.URLMapArgs{
Name: pulumi.String("urlmap"),
Description: pulumi.String("a description"),
DefaultService: example.ID(),
DefaultCustomErrorResponsePolicy: &compute.URLMapDefaultCustomErrorResponsePolicyArgs{
ErrorResponseRules: compute.URLMapDefaultCustomErrorResponsePolicyErrorResponseRuleArray{
&compute.URLMapDefaultCustomErrorResponsePolicyErrorResponseRuleArgs{
MatchResponseCodes: pulumi.StringArray{
pulumi.String("5xx"),
},
Path: pulumi.String("/internal_error.html"),
OverrideResponseCode: pulumi.Int(502),
},
},
ErrorService: error.ID(),
},
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("mysite.com"),
},
PathMatcher: pulumi.String("mysite"),
},
},
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("mysite"),
DefaultService: example.ID(),
DefaultCustomErrorResponsePolicy: &compute.URLMapPathMatcherDefaultCustomErrorResponsePolicyArgs{
ErrorResponseRules: compute.URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArray{
&compute.URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs{
MatchResponseCodes: pulumi.StringArray{
pulumi.String("4xx"),
pulumi.String("5xx"),
},
Path: pulumi.String("/login_error.html"),
OverrideResponseCode: pulumi.Int(404),
},
&compute.URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs{
MatchResponseCodes: pulumi.StringArray{
pulumi.String("503"),
},
Path: pulumi.String("/bad_gateway.html"),
OverrideResponseCode: pulumi.Int(502),
},
},
ErrorService: error.ID(),
},
PathRules: compute.URLMapPathMatcherPathRuleArray{
&compute.URLMapPathMatcherPathRuleArgs{
Paths: pulumi.StringArray{
pulumi.String("/private/*"),
},
Service: example.ID(),
CustomErrorResponsePolicy: &compute.URLMapPathMatcherPathRuleCustomErrorResponsePolicyArgs{
ErrorResponseRules: compute.URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRuleArray{
&compute.URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRuleArgs{
MatchResponseCodes: pulumi.StringArray{
pulumi.String("4xx"),
},
Path: pulumi.String("/login.html"),
OverrideResponseCode: pulumi.Int(401),
},
},
ErrorService: error.ID(),
},
},
},
},
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Gcp = Pulumi.Gcp;
return await Deployment.RunAsync(() =>
{
var @default = new Gcp.Compute.HttpHealthCheck("default", new()
{
Name = "health-check",
RequestPath = "/",
CheckIntervalSec = 1,
TimeoutSec = 1,
});
var example = new Gcp.Compute.BackendService("example", new()
{
Name = "login",
PortName = "http",
Protocol = "HTTP",
TimeoutSec = 10,
LoadBalancingScheme = "EXTERNAL_MANAGED",
HealthChecks = @default.Id,
});
var errorBucket = new Gcp.Storage.Bucket("error", new()
{
Name = "static-asset-bucket",
Location = "US",
});
var error = new Gcp.Compute.BackendBucket("error", new()
{
Name = "error-backend-bucket",
BucketName = errorBucket.Name,
EnableCdn = true,
});
var urlmap = new Gcp.Compute.URLMap("urlmap", new()
{
Name = "urlmap",
Description = "a description",
DefaultService = example.Id,
DefaultCustomErrorResponsePolicy = new Gcp.Compute.Inputs.URLMapDefaultCustomErrorResponsePolicyArgs
{
ErrorResponseRules = new[]
{
new Gcp.Compute.Inputs.URLMapDefaultCustomErrorResponsePolicyErrorResponseRuleArgs
{
MatchResponseCodes = new[]
{
"5xx",
},
Path = "/internal_error.html",
OverrideResponseCode = 502,
},
},
ErrorService = error.Id,
},
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"mysite.com",
},
PathMatcher = "mysite",
},
},
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "mysite",
DefaultService = example.Id,
DefaultCustomErrorResponsePolicy = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultCustomErrorResponsePolicyArgs
{
ErrorResponseRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs
{
MatchResponseCodes = new[]
{
"4xx",
"5xx",
},
Path = "/login_error.html",
OverrideResponseCode = 404,
},
new Gcp.Compute.Inputs.URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs
{
MatchResponseCodes = new[]
{
"503",
},
Path = "/bad_gateway.html",
OverrideResponseCode = 502,
},
},
ErrorService = error.Id,
},
PathRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleArgs
{
Paths = new[]
{
"/private/*",
},
Service = example.Id,
CustomErrorResponsePolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleCustomErrorResponsePolicyArgs
{
ErrorResponseRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRuleArgs
{
MatchResponseCodes = new[]
{
"4xx",
},
Path = "/login.html",
OverrideResponseCode = 401,
},
},
ErrorService = error.Id,
},
},
},
},
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.gcp.compute.HttpHealthCheck;
import com.pulumi.gcp.compute.HttpHealthCheckArgs;
import com.pulumi.gcp.compute.BackendService;
import com.pulumi.gcp.compute.BackendServiceArgs;
import com.pulumi.gcp.storage.Bucket;
import com.pulumi.gcp.storage.BucketArgs;
import com.pulumi.gcp.compute.BackendBucket;
import com.pulumi.gcp.compute.BackendBucketArgs;
import com.pulumi.gcp.compute.URLMap;
import com.pulumi.gcp.compute.URLMapArgs;
import com.pulumi.gcp.compute.inputs.URLMapDefaultCustomErrorResponsePolicyArgs;
import com.pulumi.gcp.compute.inputs.URLMapHostRuleArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherArgs;
import com.pulumi.gcp.compute.inputs.URLMapPathMatcherDefaultCustomErrorResponsePolicyArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var default_ = new HttpHealthCheck("default", HttpHealthCheckArgs.builder()
.name("health-check")
.requestPath("/")
.checkIntervalSec(1)
.timeoutSec(1)
.build());
var example = new BackendService("example", BackendServiceArgs.builder()
.name("login")
.portName("http")
.protocol("HTTP")
.timeoutSec(10)
.loadBalancingScheme("EXTERNAL_MANAGED")
.healthChecks(default_.id())
.build());
var errorBucket = new Bucket("errorBucket", BucketArgs.builder()
.name("static-asset-bucket")
.location("US")
.build());
var error = new BackendBucket("error", BackendBucketArgs.builder()
.name("error-backend-bucket")
.bucketName(errorBucket.name())
.enableCdn(true)
.build());
var urlmap = new URLMap("urlmap", URLMapArgs.builder()
.name("urlmap")
.description("a description")
.defaultService(example.id())
.defaultCustomErrorResponsePolicy(URLMapDefaultCustomErrorResponsePolicyArgs.builder()
.errorResponseRules(URLMapDefaultCustomErrorResponsePolicyErrorResponseRuleArgs.builder()
.matchResponseCodes("5xx")
.path("/internal_error.html")
.overrideResponseCode(502)
.build())
.errorService(error.id())
.build())
.hostRules(URLMapHostRuleArgs.builder()
.hosts("mysite.com")
.pathMatcher("mysite")
.build())
.pathMatchers(URLMapPathMatcherArgs.builder()
.name("mysite")
.defaultService(example.id())
.defaultCustomErrorResponsePolicy(URLMapPathMatcherDefaultCustomErrorResponsePolicyArgs.builder()
.errorResponseRules(
URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs.builder()
.matchResponseCodes(
"4xx",
"5xx")
.path("/login_error.html")
.overrideResponseCode(404)
.build(),
URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs.builder()
.matchResponseCodes("503")
.path("/bad_gateway.html")
.overrideResponseCode(502)
.build())
.errorService(error.id())
.build())
.pathRules(URLMapPathMatcherPathRuleArgs.builder()
.paths("/private/*")
.service(example.id())
.customErrorResponsePolicy(URLMapPathMatcherPathRuleCustomErrorResponsePolicyArgs.builder()
.errorResponseRules(URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRuleArgs.builder()
.matchResponseCodes("4xx")
.path("/login.html")
.overrideResponseCode(401)
.build())
.errorService(error.id())
.build())
.build())
.build())
.build());
}
}
resources:
urlmap:
type: gcp:compute:URLMap
properties:
name: urlmap
description: a description
defaultService: ${example.id}
defaultCustomErrorResponsePolicy:
errorResponseRules:
- matchResponseCodes:
- 5xx
path: /internal_error.html
overrideResponseCode: 502
errorService: ${error.id}
hostRules:
- hosts:
- mysite.com
pathMatcher: mysite
pathMatchers:
- name: mysite
defaultService: ${example.id}
defaultCustomErrorResponsePolicy:
errorResponseRules:
- matchResponseCodes:
- 4xx
- 5xx
path: /login_error.html
overrideResponseCode: 404
- matchResponseCodes:
- '503'
path: /bad_gateway.html
overrideResponseCode: 502
errorService: ${error.id}
pathRules:
- paths:
- /private/*
service: ${example.id}
customErrorResponsePolicy:
errorResponseRules:
- matchResponseCodes:
- 4xx
path: /login.html
overrideResponseCode: 401
errorService: ${error.id}
example:
type: gcp:compute:BackendService
properties:
name: login
portName: http
protocol: HTTP
timeoutSec: 10
loadBalancingScheme: EXTERNAL_MANAGED
healthChecks: ${default.id}
default:
type: gcp:compute:HttpHealthCheck
properties:
name: health-check
requestPath: /
checkIntervalSec: 1
timeoutSec: 1
error:
type: gcp:compute:BackendBucket
properties:
name: error-backend-bucket
bucketName: ${errorBucket.name}
enableCdn: true
errorBucket:
type: gcp:storage:Bucket
name: error
properties:
name: static-asset-bucket
location: US
Create URLMap Resource
Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.
Constructor syntax
new URLMap(name: string, args?: URLMapArgs, opts?: CustomResourceOptions);@overload
def URLMap(resource_name: str,
args: Optional[URLMapArgs] = None,
opts: Optional[ResourceOptions] = None)
@overload
def URLMap(resource_name: str,
opts: Optional[ResourceOptions] = None,
default_custom_error_response_policy: Optional[URLMapDefaultCustomErrorResponsePolicyArgs] = None,
default_route_action: Optional[URLMapDefaultRouteActionArgs] = None,
default_service: Optional[str] = None,
default_url_redirect: Optional[URLMapDefaultUrlRedirectArgs] = None,
description: Optional[str] = None,
header_action: Optional[URLMapHeaderActionArgs] = None,
host_rules: Optional[Sequence[URLMapHostRuleArgs]] = None,
name: Optional[str] = None,
path_matchers: Optional[Sequence[URLMapPathMatcherArgs]] = None,
project: Optional[str] = None,
tests: Optional[Sequence[URLMapTestArgs]] = None)func NewURLMap(ctx *Context, name string, args *URLMapArgs, opts ...ResourceOption) (*URLMap, error)public URLMap(string name, URLMapArgs? args = null, CustomResourceOptions? opts = null)
public URLMap(String name, URLMapArgs args)
public URLMap(String name, URLMapArgs args, CustomResourceOptions options)
type: gcp:compute:URLMap
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.
Parameters
- name string
- The unique name of the resource.
- args URLMapArgs
- The arguments to resource properties.
- opts CustomResourceOptions
- Bag of options to control resource's behavior.
- resource_name str
- The unique name of the resource.
- args URLMapArgs
- The arguments to resource properties.
- opts ResourceOptions
- Bag of options to control resource's behavior.
- ctx Context
- Context object for the current deployment.
- name string
- The unique name of the resource.
- args URLMapArgs
- The arguments to resource properties.
- opts ResourceOption
- Bag of options to control resource's behavior.
- name string
- The unique name of the resource.
- args URLMapArgs
- The arguments to resource properties.
- opts CustomResourceOptions
- Bag of options to control resource's behavior.
- name String
- The unique name of the resource.
- args URLMapArgs
- The arguments to resource properties.
- options CustomResourceOptions
- Bag of options to control resource's behavior.
Constructor example
The following reference example uses placeholder values for all input properties.
var urlmapResource = new Gcp.Compute.URLMap("urlmapResource", new()
{
DefaultCustomErrorResponsePolicy = new Gcp.Compute.Inputs.URLMapDefaultCustomErrorResponsePolicyArgs
{
ErrorResponseRules = new[]
{
new Gcp.Compute.Inputs.URLMapDefaultCustomErrorResponsePolicyErrorResponseRuleArgs
{
MatchResponseCodes = new[]
{
"string",
},
OverrideResponseCode = 0,
Path = "string",
},
},
ErrorService = "string",
},
DefaultRouteAction = new Gcp.Compute.Inputs.URLMapDefaultRouteActionArgs
{
CorsPolicy = new Gcp.Compute.Inputs.URLMapDefaultRouteActionCorsPolicyArgs
{
AllowCredentials = false,
AllowHeaders = new[]
{
"string",
},
AllowMethods = new[]
{
"string",
},
AllowOriginRegexes = new[]
{
"string",
},
AllowOrigins = new[]
{
"string",
},
Disabled = false,
ExposeHeaders = new[]
{
"string",
},
MaxAge = 0,
},
FaultInjectionPolicy = new Gcp.Compute.Inputs.URLMapDefaultRouteActionFaultInjectionPolicyArgs
{
Abort = new Gcp.Compute.Inputs.URLMapDefaultRouteActionFaultInjectionPolicyAbortArgs
{
HttpStatus = 0,
Percentage = 0,
},
Delay = new Gcp.Compute.Inputs.URLMapDefaultRouteActionFaultInjectionPolicyDelayArgs
{
FixedDelay = new Gcp.Compute.Inputs.URLMapDefaultRouteActionFaultInjectionPolicyDelayFixedDelayArgs
{
Nanos = 0,
Seconds = "string",
},
Percentage = 0,
},
},
RequestMirrorPolicy = new Gcp.Compute.Inputs.URLMapDefaultRouteActionRequestMirrorPolicyArgs
{
BackendService = "string",
},
RetryPolicy = new Gcp.Compute.Inputs.URLMapDefaultRouteActionRetryPolicyArgs
{
NumRetries = 0,
PerTryTimeout = new Gcp.Compute.Inputs.URLMapDefaultRouteActionRetryPolicyPerTryTimeoutArgs
{
Nanos = 0,
Seconds = "string",
},
RetryConditions = new[]
{
"string",
},
},
Timeout = new Gcp.Compute.Inputs.URLMapDefaultRouteActionTimeoutArgs
{
Nanos = 0,
Seconds = "string",
},
UrlRewrite = new Gcp.Compute.Inputs.URLMapDefaultRouteActionUrlRewriteArgs
{
HostRewrite = "string",
PathPrefixRewrite = "string",
},
WeightedBackendServices = new[]
{
new Gcp.Compute.Inputs.URLMapDefaultRouteActionWeightedBackendServiceArgs
{
BackendService = "string",
HeaderAction = new Gcp.Compute.Inputs.URLMapDefaultRouteActionWeightedBackendServiceHeaderActionArgs
{
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
RequestHeadersToRemoves = new[]
{
"string",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
ResponseHeadersToRemoves = new[]
{
"string",
},
},
Weight = 0,
},
},
},
DefaultService = "string",
DefaultUrlRedirect = new Gcp.Compute.Inputs.URLMapDefaultUrlRedirectArgs
{
StripQuery = false,
HostRedirect = "string",
HttpsRedirect = false,
PathRedirect = "string",
PrefixRedirect = "string",
RedirectResponseCode = "string",
},
Description = "string",
HeaderAction = new Gcp.Compute.Inputs.URLMapHeaderActionArgs
{
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapHeaderActionRequestHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
RequestHeadersToRemoves = new[]
{
"string",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapHeaderActionResponseHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
ResponseHeadersToRemoves = new[]
{
"string",
},
},
HostRules = new[]
{
new Gcp.Compute.Inputs.URLMapHostRuleArgs
{
Hosts = new[]
{
"string",
},
PathMatcher = "string",
Description = "string",
},
},
Name = "string",
PathMatchers = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherArgs
{
Name = "string",
DefaultCustomErrorResponsePolicy = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultCustomErrorResponsePolicyArgs
{
ErrorResponseRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs
{
MatchResponseCodes = new[]
{
"string",
},
OverrideResponseCode = 0,
Path = "string",
},
},
ErrorService = "string",
},
DefaultRouteAction = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionArgs
{
CorsPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionCorsPolicyArgs
{
AllowCredentials = false,
AllowHeaders = new[]
{
"string",
},
AllowMethods = new[]
{
"string",
},
AllowOriginRegexes = new[]
{
"string",
},
AllowOrigins = new[]
{
"string",
},
Disabled = false,
ExposeHeaders = new[]
{
"string",
},
MaxAge = 0,
},
FaultInjectionPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyArgs
{
Abort = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyAbortArgs
{
HttpStatus = 0,
Percentage = 0,
},
Delay = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayArgs
{
FixedDelay = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayFixedDelayArgs
{
Nanos = 0,
Seconds = "string",
},
Percentage = 0,
},
},
RequestMirrorPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionRequestMirrorPolicyArgs
{
BackendService = "string",
},
RetryPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionRetryPolicyArgs
{
NumRetries = 0,
PerTryTimeout = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionRetryPolicyPerTryTimeoutArgs
{
Nanos = 0,
Seconds = "string",
},
RetryConditions = new[]
{
"string",
},
},
Timeout = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionTimeoutArgs
{
Nanos = 0,
Seconds = "string",
},
UrlRewrite = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionUrlRewriteArgs
{
HostRewrite = "string",
PathPrefixRewrite = "string",
},
WeightedBackendServices = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceArgs
{
BackendService = "string",
HeaderAction = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionArgs
{
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
RequestHeadersToRemoves = new[]
{
"string",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
ResponseHeadersToRemoves = new[]
{
"string",
},
},
Weight = 0,
},
},
},
DefaultService = "string",
DefaultUrlRedirect = new Gcp.Compute.Inputs.URLMapPathMatcherDefaultUrlRedirectArgs
{
StripQuery = false,
HostRedirect = "string",
HttpsRedirect = false,
PathRedirect = "string",
PrefixRedirect = "string",
RedirectResponseCode = "string",
},
Description = "string",
HeaderAction = new Gcp.Compute.Inputs.URLMapPathMatcherHeaderActionArgs
{
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherHeaderActionRequestHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
RequestHeadersToRemoves = new[]
{
"string",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherHeaderActionResponseHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
ResponseHeadersToRemoves = new[]
{
"string",
},
},
PathRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleArgs
{
Paths = new[]
{
"string",
},
CustomErrorResponsePolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleCustomErrorResponsePolicyArgs
{
ErrorResponseRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRuleArgs
{
MatchResponseCodes = new[]
{
"string",
},
OverrideResponseCode = 0,
Path = "string",
},
},
ErrorService = "string",
},
RouteAction = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionArgs
{
CorsPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs
{
Disabled = false,
AllowCredentials = false,
AllowHeaders = new[]
{
"string",
},
AllowMethods = new[]
{
"string",
},
AllowOriginRegexes = new[]
{
"string",
},
AllowOrigins = new[]
{
"string",
},
ExposeHeaders = new[]
{
"string",
},
MaxAge = 0,
},
FaultInjectionPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyArgs
{
Abort = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbortArgs
{
HttpStatus = 0,
Percentage = 0,
},
Delay = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayArgs
{
FixedDelay = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs
{
Seconds = "string",
Nanos = 0,
},
Percentage = 0,
},
},
RequestMirrorPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionRequestMirrorPolicyArgs
{
BackendService = "string",
},
RetryPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionRetryPolicyArgs
{
NumRetries = 0,
PerTryTimeout = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeoutArgs
{
Seconds = "string",
Nanos = 0,
},
RetryConditions = new[]
{
"string",
},
},
Timeout = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionTimeoutArgs
{
Seconds = "string",
Nanos = 0,
},
UrlRewrite = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionUrlRewriteArgs
{
HostRewrite = "string",
PathPrefixRewrite = "string",
},
WeightedBackendServices = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs
{
BackendService = "string",
Weight = 0,
HeaderAction = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs
{
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
RequestHeadersToRemoves = new[]
{
"string",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
ResponseHeadersToRemoves = new[]
{
"string",
},
},
},
},
},
Service = "string",
UrlRedirect = new Gcp.Compute.Inputs.URLMapPathMatcherPathRuleUrlRedirectArgs
{
StripQuery = false,
HostRedirect = "string",
HttpsRedirect = false,
PathRedirect = "string",
PrefixRedirect = "string",
RedirectResponseCode = "string",
},
},
},
RouteRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleArgs
{
Priority = 0,
HeaderAction = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleHeaderActionArgs
{
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
RequestHeadersToRemoves = new[]
{
"string",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
ResponseHeadersToRemoves = new[]
{
"string",
},
},
MatchRules = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleArgs
{
FullPathMatch = "string",
HeaderMatches = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs
{
HeaderName = "string",
ExactMatch = "string",
InvertMatch = false,
PrefixMatch = "string",
PresentMatch = false,
RangeMatch = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatchArgs
{
RangeEnd = 0,
RangeStart = 0,
},
RegexMatch = "string",
SuffixMatch = "string",
},
},
IgnoreCase = false,
MetadataFilters = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterArgs
{
FilterLabels = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArgs
{
Name = "string",
Value = "string",
},
},
FilterMatchCriteria = "string",
},
},
PathTemplateMatch = "string",
PrefixMatch = "string",
QueryParameterMatches = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs
{
Name = "string",
ExactMatch = "string",
PresentMatch = false,
RegexMatch = "string",
},
},
RegexMatch = "string",
},
},
RouteAction = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionArgs
{
CorsPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionCorsPolicyArgs
{
AllowCredentials = false,
AllowHeaders = new[]
{
"string",
},
AllowMethods = new[]
{
"string",
},
AllowOriginRegexes = new[]
{
"string",
},
AllowOrigins = new[]
{
"string",
},
Disabled = false,
ExposeHeaders = new[]
{
"string",
},
MaxAge = 0,
},
FaultInjectionPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyArgs
{
Abort = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbortArgs
{
HttpStatus = 0,
Percentage = 0,
},
Delay = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayArgs
{
FixedDelay = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs
{
Seconds = "string",
Nanos = 0,
},
Percentage = 0,
},
},
RequestMirrorPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionRequestMirrorPolicyArgs
{
BackendService = "string",
},
RetryPolicy = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionRetryPolicyArgs
{
NumRetries = 0,
PerTryTimeout = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeoutArgs
{
Seconds = "string",
Nanos = 0,
},
RetryConditions = new[]
{
"string",
},
},
Timeout = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionTimeoutArgs
{
Seconds = "string",
Nanos = 0,
},
UrlRewrite = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionUrlRewriteArgs
{
HostRewrite = "string",
PathPrefixRewrite = "string",
PathTemplateRewrite = "string",
},
WeightedBackendServices = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceArgs
{
BackendService = "string",
Weight = 0,
HeaderAction = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionArgs
{
RequestHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
RequestHeadersToRemoves = new[]
{
"string",
},
ResponseHeadersToAdds = new[]
{
new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
{
HeaderName = "string",
HeaderValue = "string",
Replace = false,
},
},
ResponseHeadersToRemoves = new[]
{
"string",
},
},
},
},
},
Service = "string",
UrlRedirect = new Gcp.Compute.Inputs.URLMapPathMatcherRouteRuleUrlRedirectArgs
{
HostRedirect = "string",
HttpsRedirect = false,
PathRedirect = "string",
PrefixRedirect = "string",
RedirectResponseCode = "string",
StripQuery = false,
},
},
},
},
},
Project = "string",
Tests = new[]
{
new Gcp.Compute.Inputs.URLMapTestArgs
{
Host = "string",
Path = "string",
Service = "string",
Description = "string",
},
},
});
example, err := compute.NewURLMap(ctx, "urlmapResource", &compute.URLMapArgs{
DefaultCustomErrorResponsePolicy: &compute.URLMapDefaultCustomErrorResponsePolicyArgs{
ErrorResponseRules: compute.URLMapDefaultCustomErrorResponsePolicyErrorResponseRuleArray{
&compute.URLMapDefaultCustomErrorResponsePolicyErrorResponseRuleArgs{
MatchResponseCodes: pulumi.StringArray{
pulumi.String("string"),
},
OverrideResponseCode: pulumi.Int(0),
Path: pulumi.String("string"),
},
},
ErrorService: pulumi.String("string"),
},
DefaultRouteAction: &compute.URLMapDefaultRouteActionArgs{
CorsPolicy: &compute.URLMapDefaultRouteActionCorsPolicyArgs{
AllowCredentials: pulumi.Bool(false),
AllowHeaders: pulumi.StringArray{
pulumi.String("string"),
},
AllowMethods: pulumi.StringArray{
pulumi.String("string"),
},
AllowOriginRegexes: pulumi.StringArray{
pulumi.String("string"),
},
AllowOrigins: pulumi.StringArray{
pulumi.String("string"),
},
Disabled: pulumi.Bool(false),
ExposeHeaders: pulumi.StringArray{
pulumi.String("string"),
},
MaxAge: pulumi.Int(0),
},
FaultInjectionPolicy: &compute.URLMapDefaultRouteActionFaultInjectionPolicyArgs{
Abort: &compute.URLMapDefaultRouteActionFaultInjectionPolicyAbortArgs{
HttpStatus: pulumi.Int(0),
Percentage: pulumi.Float64(0),
},
Delay: &compute.URLMapDefaultRouteActionFaultInjectionPolicyDelayArgs{
FixedDelay: &compute.URLMapDefaultRouteActionFaultInjectionPolicyDelayFixedDelayArgs{
Nanos: pulumi.Int(0),
Seconds: pulumi.String("string"),
},
Percentage: pulumi.Float64(0),
},
},
RequestMirrorPolicy: &compute.URLMapDefaultRouteActionRequestMirrorPolicyArgs{
BackendService: pulumi.String("string"),
},
RetryPolicy: &compute.URLMapDefaultRouteActionRetryPolicyArgs{
NumRetries: pulumi.Int(0),
PerTryTimeout: &compute.URLMapDefaultRouteActionRetryPolicyPerTryTimeoutArgs{
Nanos: pulumi.Int(0),
Seconds: pulumi.String("string"),
},
RetryConditions: pulumi.StringArray{
pulumi.String("string"),
},
},
Timeout: &compute.URLMapDefaultRouteActionTimeoutArgs{
Nanos: pulumi.Int(0),
Seconds: pulumi.String("string"),
},
UrlRewrite: &compute.URLMapDefaultRouteActionUrlRewriteArgs{
HostRewrite: pulumi.String("string"),
PathPrefixRewrite: pulumi.String("string"),
},
WeightedBackendServices: compute.URLMapDefaultRouteActionWeightedBackendServiceArray{
&compute.URLMapDefaultRouteActionWeightedBackendServiceArgs{
BackendService: pulumi.String("string"),
HeaderAction: &compute.URLMapDefaultRouteActionWeightedBackendServiceHeaderActionArgs{
RequestHeadersToAdds: compute.URLMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArray{
&compute.URLMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
ResponseHeadersToAdds: compute.URLMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArray{
&compute.URLMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
},
Weight: pulumi.Int(0),
},
},
},
DefaultService: pulumi.String("string"),
DefaultUrlRedirect: &compute.URLMapDefaultUrlRedirectArgs{
StripQuery: pulumi.Bool(false),
HostRedirect: pulumi.String("string"),
HttpsRedirect: pulumi.Bool(false),
PathRedirect: pulumi.String("string"),
PrefixRedirect: pulumi.String("string"),
RedirectResponseCode: pulumi.String("string"),
},
Description: pulumi.String("string"),
HeaderAction: &compute.URLMapHeaderActionArgs{
RequestHeadersToAdds: compute.URLMapHeaderActionRequestHeadersToAddArray{
&compute.URLMapHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
ResponseHeadersToAdds: compute.URLMapHeaderActionResponseHeadersToAddArray{
&compute.URLMapHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
},
HostRules: compute.URLMapHostRuleArray{
&compute.URLMapHostRuleArgs{
Hosts: pulumi.StringArray{
pulumi.String("string"),
},
PathMatcher: pulumi.String("string"),
Description: pulumi.String("string"),
},
},
Name: pulumi.String("string"),
PathMatchers: compute.URLMapPathMatcherArray{
&compute.URLMapPathMatcherArgs{
Name: pulumi.String("string"),
DefaultCustomErrorResponsePolicy: &compute.URLMapPathMatcherDefaultCustomErrorResponsePolicyArgs{
ErrorResponseRules: compute.URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArray{
&compute.URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs{
MatchResponseCodes: pulumi.StringArray{
pulumi.String("string"),
},
OverrideResponseCode: pulumi.Int(0),
Path: pulumi.String("string"),
},
},
ErrorService: pulumi.String("string"),
},
DefaultRouteAction: &compute.URLMapPathMatcherDefaultRouteActionArgs{
CorsPolicy: &compute.URLMapPathMatcherDefaultRouteActionCorsPolicyArgs{
AllowCredentials: pulumi.Bool(false),
AllowHeaders: pulumi.StringArray{
pulumi.String("string"),
},
AllowMethods: pulumi.StringArray{
pulumi.String("string"),
},
AllowOriginRegexes: pulumi.StringArray{
pulumi.String("string"),
},
AllowOrigins: pulumi.StringArray{
pulumi.String("string"),
},
Disabled: pulumi.Bool(false),
ExposeHeaders: pulumi.StringArray{
pulumi.String("string"),
},
MaxAge: pulumi.Int(0),
},
FaultInjectionPolicy: &compute.URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyArgs{
Abort: &compute.URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyAbortArgs{
HttpStatus: pulumi.Int(0),
Percentage: pulumi.Float64(0),
},
Delay: &compute.URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayArgs{
FixedDelay: &compute.URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayFixedDelayArgs{
Nanos: pulumi.Int(0),
Seconds: pulumi.String("string"),
},
Percentage: pulumi.Float64(0),
},
},
RequestMirrorPolicy: &compute.URLMapPathMatcherDefaultRouteActionRequestMirrorPolicyArgs{
BackendService: pulumi.String("string"),
},
RetryPolicy: &compute.URLMapPathMatcherDefaultRouteActionRetryPolicyArgs{
NumRetries: pulumi.Int(0),
PerTryTimeout: &compute.URLMapPathMatcherDefaultRouteActionRetryPolicyPerTryTimeoutArgs{
Nanos: pulumi.Int(0),
Seconds: pulumi.String("string"),
},
RetryConditions: pulumi.StringArray{
pulumi.String("string"),
},
},
Timeout: &compute.URLMapPathMatcherDefaultRouteActionTimeoutArgs{
Nanos: pulumi.Int(0),
Seconds: pulumi.String("string"),
},
UrlRewrite: &compute.URLMapPathMatcherDefaultRouteActionUrlRewriteArgs{
HostRewrite: pulumi.String("string"),
PathPrefixRewrite: pulumi.String("string"),
},
WeightedBackendServices: compute.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceArray{
&compute.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceArgs{
BackendService: pulumi.String("string"),
HeaderAction: &compute.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionArgs{
RequestHeadersToAdds: compute.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArray{
&compute.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
ResponseHeadersToAdds: compute.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArray{
&compute.URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
},
Weight: pulumi.Int(0),
},
},
},
DefaultService: pulumi.String("string"),
DefaultUrlRedirect: &compute.URLMapPathMatcherDefaultUrlRedirectArgs{
StripQuery: pulumi.Bool(false),
HostRedirect: pulumi.String("string"),
HttpsRedirect: pulumi.Bool(false),
PathRedirect: pulumi.String("string"),
PrefixRedirect: pulumi.String("string"),
RedirectResponseCode: pulumi.String("string"),
},
Description: pulumi.String("string"),
HeaderAction: &compute.URLMapPathMatcherHeaderActionArgs{
RequestHeadersToAdds: compute.URLMapPathMatcherHeaderActionRequestHeadersToAddArray{
&compute.URLMapPathMatcherHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
ResponseHeadersToAdds: compute.URLMapPathMatcherHeaderActionResponseHeadersToAddArray{
&compute.URLMapPathMatcherHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
},
PathRules: compute.URLMapPathMatcherPathRuleArray{
&compute.URLMapPathMatcherPathRuleArgs{
Paths: pulumi.StringArray{
pulumi.String("string"),
},
CustomErrorResponsePolicy: &compute.URLMapPathMatcherPathRuleCustomErrorResponsePolicyArgs{
ErrorResponseRules: compute.URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRuleArray{
&compute.URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRuleArgs{
MatchResponseCodes: pulumi.StringArray{
pulumi.String("string"),
},
OverrideResponseCode: pulumi.Int(0),
Path: pulumi.String("string"),
},
},
ErrorService: pulumi.String("string"),
},
RouteAction: &compute.URLMapPathMatcherPathRuleRouteActionArgs{
CorsPolicy: &compute.URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs{
Disabled: pulumi.Bool(false),
AllowCredentials: pulumi.Bool(false),
AllowHeaders: pulumi.StringArray{
pulumi.String("string"),
},
AllowMethods: pulumi.StringArray{
pulumi.String("string"),
},
AllowOriginRegexes: pulumi.StringArray{
pulumi.String("string"),
},
AllowOrigins: pulumi.StringArray{
pulumi.String("string"),
},
ExposeHeaders: pulumi.StringArray{
pulumi.String("string"),
},
MaxAge: pulumi.Int(0),
},
FaultInjectionPolicy: &compute.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyArgs{
Abort: &compute.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbortArgs{
HttpStatus: pulumi.Int(0),
Percentage: pulumi.Float64(0),
},
Delay: &compute.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayArgs{
FixedDelay: &compute.URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs{
Seconds: pulumi.String("string"),
Nanos: pulumi.Int(0),
},
Percentage: pulumi.Float64(0),
},
},
RequestMirrorPolicy: &compute.URLMapPathMatcherPathRuleRouteActionRequestMirrorPolicyArgs{
BackendService: pulumi.String("string"),
},
RetryPolicy: &compute.URLMapPathMatcherPathRuleRouteActionRetryPolicyArgs{
NumRetries: pulumi.Int(0),
PerTryTimeout: &compute.URLMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeoutArgs{
Seconds: pulumi.String("string"),
Nanos: pulumi.Int(0),
},
RetryConditions: pulumi.StringArray{
pulumi.String("string"),
},
},
Timeout: &compute.URLMapPathMatcherPathRuleRouteActionTimeoutArgs{
Seconds: pulumi.String("string"),
Nanos: pulumi.Int(0),
},
UrlRewrite: &compute.URLMapPathMatcherPathRuleRouteActionUrlRewriteArgs{
HostRewrite: pulumi.String("string"),
PathPrefixRewrite: pulumi.String("string"),
},
WeightedBackendServices: compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArray{
&compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs{
BackendService: pulumi.String("string"),
Weight: pulumi.Int(0),
HeaderAction: &compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs{
RequestHeadersToAdds: compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArray{
&compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
ResponseHeadersToAdds: compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArray{
&compute.URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
},
},
},
},
Service: pulumi.String("string"),
UrlRedirect: &compute.URLMapPathMatcherPathRuleUrlRedirectArgs{
StripQuery: pulumi.Bool(false),
HostRedirect: pulumi.String("string"),
HttpsRedirect: pulumi.Bool(false),
PathRedirect: pulumi.String("string"),
PrefixRedirect: pulumi.String("string"),
RedirectResponseCode: pulumi.String("string"),
},
},
},
RouteRules: compute.URLMapPathMatcherRouteRuleArray{
&compute.URLMapPathMatcherRouteRuleArgs{
Priority: pulumi.Int(0),
HeaderAction: &compute.URLMapPathMatcherRouteRuleHeaderActionArgs{
RequestHeadersToAdds: compute.URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArray{
&compute.URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
ResponseHeadersToAdds: compute.URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArray{
&compute.URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
},
MatchRules: compute.URLMapPathMatcherRouteRuleMatchRuleArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleArgs{
FullPathMatch: pulumi.String("string"),
HeaderMatches: compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs{
HeaderName: pulumi.String("string"),
ExactMatch: pulumi.String("string"),
InvertMatch: pulumi.Bool(false),
PrefixMatch: pulumi.String("string"),
PresentMatch: pulumi.Bool(false),
RangeMatch: &compute.URLMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatchArgs{
RangeEnd: pulumi.Int(0),
RangeStart: pulumi.Int(0),
},
RegexMatch: pulumi.String("string"),
SuffixMatch: pulumi.String("string"),
},
},
IgnoreCase: pulumi.Bool(false),
MetadataFilters: compute.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterArgs{
FilterLabels: compute.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArgs{
Name: pulumi.String("string"),
Value: pulumi.String("string"),
},
},
FilterMatchCriteria: pulumi.String("string"),
},
},
PathTemplateMatch: pulumi.String("string"),
PrefixMatch: pulumi.String("string"),
QueryParameterMatches: compute.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArray{
&compute.URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs{
Name: pulumi.String("string"),
ExactMatch: pulumi.String("string"),
PresentMatch: pulumi.Bool(false),
RegexMatch: pulumi.String("string"),
},
},
RegexMatch: pulumi.String("string"),
},
},
RouteAction: &compute.URLMapPathMatcherRouteRuleRouteActionArgs{
CorsPolicy: &compute.URLMapPathMatcherRouteRuleRouteActionCorsPolicyArgs{
AllowCredentials: pulumi.Bool(false),
AllowHeaders: pulumi.StringArray{
pulumi.String("string"),
},
AllowMethods: pulumi.StringArray{
pulumi.String("string"),
},
AllowOriginRegexes: pulumi.StringArray{
pulumi.String("string"),
},
AllowOrigins: pulumi.StringArray{
pulumi.String("string"),
},
Disabled: pulumi.Bool(false),
ExposeHeaders: pulumi.StringArray{
pulumi.String("string"),
},
MaxAge: pulumi.Int(0),
},
FaultInjectionPolicy: &compute.URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyArgs{
Abort: &compute.URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbortArgs{
HttpStatus: pulumi.Int(0),
Percentage: pulumi.Float64(0),
},
Delay: &compute.URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayArgs{
FixedDelay: &compute.URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs{
Seconds: pulumi.String("string"),
Nanos: pulumi.Int(0),
},
Percentage: pulumi.Float64(0),
},
},
RequestMirrorPolicy: &compute.URLMapPathMatcherRouteRuleRouteActionRequestMirrorPolicyArgs{
BackendService: pulumi.String("string"),
},
RetryPolicy: &compute.URLMapPathMatcherRouteRuleRouteActionRetryPolicyArgs{
NumRetries: pulumi.Int(0),
PerTryTimeout: &compute.URLMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeoutArgs{
Seconds: pulumi.String("string"),
Nanos: pulumi.Int(0),
},
RetryConditions: pulumi.StringArray{
pulumi.String("string"),
},
},
Timeout: &compute.URLMapPathMatcherRouteRuleRouteActionTimeoutArgs{
Seconds: pulumi.String("string"),
Nanos: pulumi.Int(0),
},
UrlRewrite: &compute.URLMapPathMatcherRouteRuleRouteActionUrlRewriteArgs{
HostRewrite: pulumi.String("string"),
PathPrefixRewrite: pulumi.String("string"),
PathTemplateRewrite: pulumi.String("string"),
},
WeightedBackendServices: compute.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceArray{
&compute.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceArgs{
BackendService: pulumi.String("string"),
Weight: pulumi.Int(0),
HeaderAction: &compute.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionArgs{
RequestHeadersToAdds: compute.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArray{
&compute.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
RequestHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
ResponseHeadersToAdds: compute.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArray{
&compute.URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs{
HeaderName: pulumi.String("string"),
HeaderValue: pulumi.String("string"),
Replace: pulumi.Bool(false),
},
},
ResponseHeadersToRemoves: pulumi.StringArray{
pulumi.String("string"),
},
},
},
},
},
Service: pulumi.String("string"),
UrlRedirect: &compute.URLMapPathMatcherRouteRuleUrlRedirectArgs{
HostRedirect: pulumi.String("string"),
HttpsRedirect: pulumi.Bool(false),
PathRedirect: pulumi.String("string"),
PrefixRedirect: pulumi.String("string"),
RedirectResponseCode: pulumi.String("string"),
StripQuery: pulumi.Bool(false),
},
},
},
},
},
Project: pulumi.String("string"),
Tests: compute.URLMapTestArray{
&compute.URLMapTestArgs{
Host: pulumi.String("string"),
Path: pulumi.String("string"),
Service: pulumi.String("string"),
Description: pulumi.String("string"),
},
},
})
var urlmapResource = new URLMap("urlmapResource", URLMapArgs.builder()
.defaultCustomErrorResponsePolicy(URLMapDefaultCustomErrorResponsePolicyArgs.builder()
.errorResponseRules(URLMapDefaultCustomErrorResponsePolicyErrorResponseRuleArgs.builder()
.matchResponseCodes("string")
.overrideResponseCode(0)
.path("string")
.build())
.errorService("string")
.build())
.defaultRouteAction(URLMapDefaultRouteActionArgs.builder()
.corsPolicy(URLMapDefaultRouteActionCorsPolicyArgs.builder()
.allowCredentials(false)
.allowHeaders("string")
.allowMethods("string")
.allowOriginRegexes("string")
.allowOrigins("string")
.disabled(false)
.exposeHeaders("string")
.maxAge(0)
.build())
.faultInjectionPolicy(URLMapDefaultRouteActionFaultInjectionPolicyArgs.builder()
.abort(URLMapDefaultRouteActionFaultInjectionPolicyAbortArgs.builder()
.httpStatus(0)
.percentage(0)
.build())
.delay(URLMapDefaultRouteActionFaultInjectionPolicyDelayArgs.builder()
.fixedDelay(URLMapDefaultRouteActionFaultInjectionPolicyDelayFixedDelayArgs.builder()
.nanos(0)
.seconds("string")
.build())
.percentage(0)
.build())
.build())
.requestMirrorPolicy(URLMapDefaultRouteActionRequestMirrorPolicyArgs.builder()
.backendService("string")
.build())
.retryPolicy(URLMapDefaultRouteActionRetryPolicyArgs.builder()
.numRetries(0)
.perTryTimeout(URLMapDefaultRouteActionRetryPolicyPerTryTimeoutArgs.builder()
.nanos(0)
.seconds("string")
.build())
.retryConditions("string")
.build())
.timeout(URLMapDefaultRouteActionTimeoutArgs.builder()
.nanos(0)
.seconds("string")
.build())
.urlRewrite(URLMapDefaultRouteActionUrlRewriteArgs.builder()
.hostRewrite("string")
.pathPrefixRewrite("string")
.build())
.weightedBackendServices(URLMapDefaultRouteActionWeightedBackendServiceArgs.builder()
.backendService("string")
.headerAction(URLMapDefaultRouteActionWeightedBackendServiceHeaderActionArgs.builder()
.requestHeadersToAdds(URLMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.requestHeadersToRemoves("string")
.responseHeadersToAdds(URLMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.responseHeadersToRemoves("string")
.build())
.weight(0)
.build())
.build())
.defaultService("string")
.defaultUrlRedirect(URLMapDefaultUrlRedirectArgs.builder()
.stripQuery(false)
.hostRedirect("string")
.httpsRedirect(false)
.pathRedirect("string")
.prefixRedirect("string")
.redirectResponseCode("string")
.build())
.description("string")
.headerAction(URLMapHeaderActionArgs.builder()
.requestHeadersToAdds(URLMapHeaderActionRequestHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.requestHeadersToRemoves("string")
.responseHeadersToAdds(URLMapHeaderActionResponseHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.responseHeadersToRemoves("string")
.build())
.hostRules(URLMapHostRuleArgs.builder()
.hosts("string")
.pathMatcher("string")
.description("string")
.build())
.name("string")
.pathMatchers(URLMapPathMatcherArgs.builder()
.name("string")
.defaultCustomErrorResponsePolicy(URLMapPathMatcherDefaultCustomErrorResponsePolicyArgs.builder()
.errorResponseRules(URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs.builder()
.matchResponseCodes("string")
.overrideResponseCode(0)
.path("string")
.build())
.errorService("string")
.build())
.defaultRouteAction(URLMapPathMatcherDefaultRouteActionArgs.builder()
.corsPolicy(URLMapPathMatcherDefaultRouteActionCorsPolicyArgs.builder()
.allowCredentials(false)
.allowHeaders("string")
.allowMethods("string")
.allowOriginRegexes("string")
.allowOrigins("string")
.disabled(false)
.exposeHeaders("string")
.maxAge(0)
.build())
.faultInjectionPolicy(URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyArgs.builder()
.abort(URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyAbortArgs.builder()
.httpStatus(0)
.percentage(0)
.build())
.delay(URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayArgs.builder()
.fixedDelay(URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayFixedDelayArgs.builder()
.nanos(0)
.seconds("string")
.build())
.percentage(0)
.build())
.build())
.requestMirrorPolicy(URLMapPathMatcherDefaultRouteActionRequestMirrorPolicyArgs.builder()
.backendService("string")
.build())
.retryPolicy(URLMapPathMatcherDefaultRouteActionRetryPolicyArgs.builder()
.numRetries(0)
.perTryTimeout(URLMapPathMatcherDefaultRouteActionRetryPolicyPerTryTimeoutArgs.builder()
.nanos(0)
.seconds("string")
.build())
.retryConditions("string")
.build())
.timeout(URLMapPathMatcherDefaultRouteActionTimeoutArgs.builder()
.nanos(0)
.seconds("string")
.build())
.urlRewrite(URLMapPathMatcherDefaultRouteActionUrlRewriteArgs.builder()
.hostRewrite("string")
.pathPrefixRewrite("string")
.build())
.weightedBackendServices(URLMapPathMatcherDefaultRouteActionWeightedBackendServiceArgs.builder()
.backendService("string")
.headerAction(URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionArgs.builder()
.requestHeadersToAdds(URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.requestHeadersToRemoves("string")
.responseHeadersToAdds(URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.responseHeadersToRemoves("string")
.build())
.weight(0)
.build())
.build())
.defaultService("string")
.defaultUrlRedirect(URLMapPathMatcherDefaultUrlRedirectArgs.builder()
.stripQuery(false)
.hostRedirect("string")
.httpsRedirect(false)
.pathRedirect("string")
.prefixRedirect("string")
.redirectResponseCode("string")
.build())
.description("string")
.headerAction(URLMapPathMatcherHeaderActionArgs.builder()
.requestHeadersToAdds(URLMapPathMatcherHeaderActionRequestHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.requestHeadersToRemoves("string")
.responseHeadersToAdds(URLMapPathMatcherHeaderActionResponseHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.responseHeadersToRemoves("string")
.build())
.pathRules(URLMapPathMatcherPathRuleArgs.builder()
.paths("string")
.customErrorResponsePolicy(URLMapPathMatcherPathRuleCustomErrorResponsePolicyArgs.builder()
.errorResponseRules(URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRuleArgs.builder()
.matchResponseCodes("string")
.overrideResponseCode(0)
.path("string")
.build())
.errorService("string")
.build())
.routeAction(URLMapPathMatcherPathRuleRouteActionArgs.builder()
.corsPolicy(URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs.builder()
.disabled(false)
.allowCredentials(false)
.allowHeaders("string")
.allowMethods("string")
.allowOriginRegexes("string")
.allowOrigins("string")
.exposeHeaders("string")
.maxAge(0)
.build())
.faultInjectionPolicy(URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyArgs.builder()
.abort(URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbortArgs.builder()
.httpStatus(0)
.percentage(0)
.build())
.delay(URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayArgs.builder()
.fixedDelay(URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs.builder()
.seconds("string")
.nanos(0)
.build())
.percentage(0)
.build())
.build())
.requestMirrorPolicy(URLMapPathMatcherPathRuleRouteActionRequestMirrorPolicyArgs.builder()
.backendService("string")
.build())
.retryPolicy(URLMapPathMatcherPathRuleRouteActionRetryPolicyArgs.builder()
.numRetries(0)
.perTryTimeout(URLMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeoutArgs.builder()
.seconds("string")
.nanos(0)
.build())
.retryConditions("string")
.build())
.timeout(URLMapPathMatcherPathRuleRouteActionTimeoutArgs.builder()
.seconds("string")
.nanos(0)
.build())
.urlRewrite(URLMapPathMatcherPathRuleRouteActionUrlRewriteArgs.builder()
.hostRewrite("string")
.pathPrefixRewrite("string")
.build())
.weightedBackendServices(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs.builder()
.backendService("string")
.weight(0)
.headerAction(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs.builder()
.requestHeadersToAdds(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.requestHeadersToRemoves("string")
.responseHeadersToAdds(URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.responseHeadersToRemoves("string")
.build())
.build())
.build())
.service("string")
.urlRedirect(URLMapPathMatcherPathRuleUrlRedirectArgs.builder()
.stripQuery(false)
.hostRedirect("string")
.httpsRedirect(false)
.pathRedirect("string")
.prefixRedirect("string")
.redirectResponseCode("string")
.build())
.build())
.routeRules(URLMapPathMatcherRouteRuleArgs.builder()
.priority(0)
.headerAction(URLMapPathMatcherRouteRuleHeaderActionArgs.builder()
.requestHeadersToAdds(URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.requestHeadersToRemoves("string")
.responseHeadersToAdds(URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.responseHeadersToRemoves("string")
.build())
.matchRules(URLMapPathMatcherRouteRuleMatchRuleArgs.builder()
.fullPathMatch("string")
.headerMatches(URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs.builder()
.headerName("string")
.exactMatch("string")
.invertMatch(false)
.prefixMatch("string")
.presentMatch(false)
.rangeMatch(URLMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatchArgs.builder()
.rangeEnd(0)
.rangeStart(0)
.build())
.regexMatch("string")
.suffixMatch("string")
.build())
.ignoreCase(false)
.metadataFilters(URLMapPathMatcherRouteRuleMatchRuleMetadataFilterArgs.builder()
.filterLabels(URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArgs.builder()
.name("string")
.value("string")
.build())
.filterMatchCriteria("string")
.build())
.pathTemplateMatch("string")
.prefixMatch("string")
.queryParameterMatches(URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs.builder()
.name("string")
.exactMatch("string")
.presentMatch(false)
.regexMatch("string")
.build())
.regexMatch("string")
.build())
.routeAction(URLMapPathMatcherRouteRuleRouteActionArgs.builder()
.corsPolicy(URLMapPathMatcherRouteRuleRouteActionCorsPolicyArgs.builder()
.allowCredentials(false)
.allowHeaders("string")
.allowMethods("string")
.allowOriginRegexes("string")
.allowOrigins("string")
.disabled(false)
.exposeHeaders("string")
.maxAge(0)
.build())
.faultInjectionPolicy(URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyArgs.builder()
.abort(URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbortArgs.builder()
.httpStatus(0)
.percentage(0)
.build())
.delay(URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayArgs.builder()
.fixedDelay(URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs.builder()
.seconds("string")
.nanos(0)
.build())
.percentage(0)
.build())
.build())
.requestMirrorPolicy(URLMapPathMatcherRouteRuleRouteActionRequestMirrorPolicyArgs.builder()
.backendService("string")
.build())
.retryPolicy(URLMapPathMatcherRouteRuleRouteActionRetryPolicyArgs.builder()
.numRetries(0)
.perTryTimeout(URLMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeoutArgs.builder()
.seconds("string")
.nanos(0)
.build())
.retryConditions("string")
.build())
.timeout(URLMapPathMatcherRouteRuleRouteActionTimeoutArgs.builder()
.seconds("string")
.nanos(0)
.build())
.urlRewrite(URLMapPathMatcherRouteRuleRouteActionUrlRewriteArgs.builder()
.hostRewrite("string")
.pathPrefixRewrite("string")
.pathTemplateRewrite("string")
.build())
.weightedBackendServices(URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceArgs.builder()
.backendService("string")
.weight(0)
.headerAction(URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionArgs.builder()
.requestHeadersToAdds(URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.requestHeadersToRemoves("string")
.responseHeadersToAdds(URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs.builder()
.headerName("string")
.headerValue("string")
.replace(false)
.build())
.responseHeadersToRemoves("string")
.build())
.build())
.build())
.service("string")
.urlRedirect(URLMapPathMatcherRouteRuleUrlRedirectArgs.builder()
.hostRedirect("string")
.httpsRedirect(false)
.pathRedirect("string")
.prefixRedirect("string")
.redirectResponseCode("string")
.stripQuery(false)
.build())
.build())
.build())
.project("string")
.tests(URLMapTestArgs.builder()
.host("string")
.path("string")
.service("string")
.description("string")
.build())
.build());
urlmap_resource = gcp.compute.URLMap("urlmapResource",
default_custom_error_response_policy={
"error_response_rules": [{
"match_response_codes": ["string"],
"override_response_code": 0,
"path": "string",
}],
"error_service": "string",
},
default_route_action={
"cors_policy": {
"allow_credentials": False,
"allow_headers": ["string"],
"allow_methods": ["string"],
"allow_origin_regexes": ["string"],
"allow_origins": ["string"],
"disabled": False,
"expose_headers": ["string"],
"max_age": 0,
},
"fault_injection_policy": {
"abort": {
"http_status": 0,
"percentage": 0,
},
"delay": {
"fixed_delay": {
"nanos": 0,
"seconds": "string",
},
"percentage": 0,
},
},
"request_mirror_policy": {
"backend_service": "string",
},
"retry_policy": {
"num_retries": 0,
"per_try_timeout": {
"nanos": 0,
"seconds": "string",
},
"retry_conditions": ["string"],
},
"timeout": {
"nanos": 0,
"seconds": "string",
},
"url_rewrite": {
"host_rewrite": "string",
"path_prefix_rewrite": "string",
},
"weighted_backend_services": [{
"backend_service": "string",
"header_action": {
"request_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"request_headers_to_removes": ["string"],
"response_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"response_headers_to_removes": ["string"],
},
"weight": 0,
}],
},
default_service="string",
default_url_redirect={
"strip_query": False,
"host_redirect": "string",
"https_redirect": False,
"path_redirect": "string",
"prefix_redirect": "string",
"redirect_response_code": "string",
},
description="string",
header_action={
"request_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"request_headers_to_removes": ["string"],
"response_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"response_headers_to_removes": ["string"],
},
host_rules=[{
"hosts": ["string"],
"path_matcher": "string",
"description": "string",
}],
name="string",
path_matchers=[{
"name": "string",
"default_custom_error_response_policy": {
"error_response_rules": [{
"match_response_codes": ["string"],
"override_response_code": 0,
"path": "string",
}],
"error_service": "string",
},
"default_route_action": {
"cors_policy": {
"allow_credentials": False,
"allow_headers": ["string"],
"allow_methods": ["string"],
"allow_origin_regexes": ["string"],
"allow_origins": ["string"],
"disabled": False,
"expose_headers": ["string"],
"max_age": 0,
},
"fault_injection_policy": {
"abort": {
"http_status": 0,
"percentage": 0,
},
"delay": {
"fixed_delay": {
"nanos": 0,
"seconds": "string",
},
"percentage": 0,
},
},
"request_mirror_policy": {
"backend_service": "string",
},
"retry_policy": {
"num_retries": 0,
"per_try_timeout": {
"nanos": 0,
"seconds": "string",
},
"retry_conditions": ["string"],
},
"timeout": {
"nanos": 0,
"seconds": "string",
},
"url_rewrite": {
"host_rewrite": "string",
"path_prefix_rewrite": "string",
},
"weighted_backend_services": [{
"backend_service": "string",
"header_action": {
"request_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"request_headers_to_removes": ["string"],
"response_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"response_headers_to_removes": ["string"],
},
"weight": 0,
}],
},
"default_service": "string",
"default_url_redirect": {
"strip_query": False,
"host_redirect": "string",
"https_redirect": False,
"path_redirect": "string",
"prefix_redirect": "string",
"redirect_response_code": "string",
},
"description": "string",
"header_action": {
"request_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"request_headers_to_removes": ["string"],
"response_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"response_headers_to_removes": ["string"],
},
"path_rules": [{
"paths": ["string"],
"custom_error_response_policy": {
"error_response_rules": [{
"match_response_codes": ["string"],
"override_response_code": 0,
"path": "string",
}],
"error_service": "string",
},
"route_action": {
"cors_policy": {
"disabled": False,
"allow_credentials": False,
"allow_headers": ["string"],
"allow_methods": ["string"],
"allow_origin_regexes": ["string"],
"allow_origins": ["string"],
"expose_headers": ["string"],
"max_age": 0,
},
"fault_injection_policy": {
"abort": {
"http_status": 0,
"percentage": 0,
},
"delay": {
"fixed_delay": {
"seconds": "string",
"nanos": 0,
},
"percentage": 0,
},
},
"request_mirror_policy": {
"backend_service": "string",
},
"retry_policy": {
"num_retries": 0,
"per_try_timeout": {
"seconds": "string",
"nanos": 0,
},
"retry_conditions": ["string"],
},
"timeout": {
"seconds": "string",
"nanos": 0,
},
"url_rewrite": {
"host_rewrite": "string",
"path_prefix_rewrite": "string",
},
"weighted_backend_services": [{
"backend_service": "string",
"weight": 0,
"header_action": {
"request_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"request_headers_to_removes": ["string"],
"response_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"response_headers_to_removes": ["string"],
},
}],
},
"service": "string",
"url_redirect": {
"strip_query": False,
"host_redirect": "string",
"https_redirect": False,
"path_redirect": "string",
"prefix_redirect": "string",
"redirect_response_code": "string",
},
}],
"route_rules": [{
"priority": 0,
"header_action": {
"request_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"request_headers_to_removes": ["string"],
"response_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"response_headers_to_removes": ["string"],
},
"match_rules": [{
"full_path_match": "string",
"header_matches": [{
"header_name": "string",
"exact_match": "string",
"invert_match": False,
"prefix_match": "string",
"present_match": False,
"range_match": {
"range_end": 0,
"range_start": 0,
},
"regex_match": "string",
"suffix_match": "string",
}],
"ignore_case": False,
"metadata_filters": [{
"filter_labels": [{
"name": "string",
"value": "string",
}],
"filter_match_criteria": "string",
}],
"path_template_match": "string",
"prefix_match": "string",
"query_parameter_matches": [{
"name": "string",
"exact_match": "string",
"present_match": False,
"regex_match": "string",
}],
"regex_match": "string",
}],
"route_action": {
"cors_policy": {
"allow_credentials": False,
"allow_headers": ["string"],
"allow_methods": ["string"],
"allow_origin_regexes": ["string"],
"allow_origins": ["string"],
"disabled": False,
"expose_headers": ["string"],
"max_age": 0,
},
"fault_injection_policy": {
"abort": {
"http_status": 0,
"percentage": 0,
},
"delay": {
"fixed_delay": {
"seconds": "string",
"nanos": 0,
},
"percentage": 0,
},
},
"request_mirror_policy": {
"backend_service": "string",
},
"retry_policy": {
"num_retries": 0,
"per_try_timeout": {
"seconds": "string",
"nanos": 0,
},
"retry_conditions": ["string"],
},
"timeout": {
"seconds": "string",
"nanos": 0,
},
"url_rewrite": {
"host_rewrite": "string",
"path_prefix_rewrite": "string",
"path_template_rewrite": "string",
},
"weighted_backend_services": [{
"backend_service": "string",
"weight": 0,
"header_action": {
"request_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"request_headers_to_removes": ["string"],
"response_headers_to_adds": [{
"header_name": "string",
"header_value": "string",
"replace": False,
}],
"response_headers_to_removes": ["string"],
},
}],
},
"service": "string",
"url_redirect": {
"host_redirect": "string",
"https_redirect": False,
"path_redirect": "string",
"prefix_redirect": "string",
"redirect_response_code": "string",
"strip_query": False,
},
}],
}],
project="string",
tests=[{
"host": "string",
"path": "string",
"service": "string",
"description": "string",
}])
const urlmapResource = new gcp.compute.URLMap("urlmapResource", {
defaultCustomErrorResponsePolicy: {
errorResponseRules: [{
matchResponseCodes: ["string"],
overrideResponseCode: 0,
path: "string",
}],
errorService: "string",
},
defaultRouteAction: {
corsPolicy: {
allowCredentials: false,
allowHeaders: ["string"],
allowMethods: ["string"],
allowOriginRegexes: ["string"],
allowOrigins: ["string"],
disabled: false,
exposeHeaders: ["string"],
maxAge: 0,
},
faultInjectionPolicy: {
abort: {
httpStatus: 0,
percentage: 0,
},
delay: {
fixedDelay: {
nanos: 0,
seconds: "string",
},
percentage: 0,
},
},
requestMirrorPolicy: {
backendService: "string",
},
retryPolicy: {
numRetries: 0,
perTryTimeout: {
nanos: 0,
seconds: "string",
},
retryConditions: ["string"],
},
timeout: {
nanos: 0,
seconds: "string",
},
urlRewrite: {
hostRewrite: "string",
pathPrefixRewrite: "string",
},
weightedBackendServices: [{
backendService: "string",
headerAction: {
requestHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
requestHeadersToRemoves: ["string"],
responseHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
responseHeadersToRemoves: ["string"],
},
weight: 0,
}],
},
defaultService: "string",
defaultUrlRedirect: {
stripQuery: false,
hostRedirect: "string",
httpsRedirect: false,
pathRedirect: "string",
prefixRedirect: "string",
redirectResponseCode: "string",
},
description: "string",
headerAction: {
requestHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
requestHeadersToRemoves: ["string"],
responseHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
responseHeadersToRemoves: ["string"],
},
hostRules: [{
hosts: ["string"],
pathMatcher: "string",
description: "string",
}],
name: "string",
pathMatchers: [{
name: "string",
defaultCustomErrorResponsePolicy: {
errorResponseRules: [{
matchResponseCodes: ["string"],
overrideResponseCode: 0,
path: "string",
}],
errorService: "string",
},
defaultRouteAction: {
corsPolicy: {
allowCredentials: false,
allowHeaders: ["string"],
allowMethods: ["string"],
allowOriginRegexes: ["string"],
allowOrigins: ["string"],
disabled: false,
exposeHeaders: ["string"],
maxAge: 0,
},
faultInjectionPolicy: {
abort: {
httpStatus: 0,
percentage: 0,
},
delay: {
fixedDelay: {
nanos: 0,
seconds: "string",
},
percentage: 0,
},
},
requestMirrorPolicy: {
backendService: "string",
},
retryPolicy: {
numRetries: 0,
perTryTimeout: {
nanos: 0,
seconds: "string",
},
retryConditions: ["string"],
},
timeout: {
nanos: 0,
seconds: "string",
},
urlRewrite: {
hostRewrite: "string",
pathPrefixRewrite: "string",
},
weightedBackendServices: [{
backendService: "string",
headerAction: {
requestHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
requestHeadersToRemoves: ["string"],
responseHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
responseHeadersToRemoves: ["string"],
},
weight: 0,
}],
},
defaultService: "string",
defaultUrlRedirect: {
stripQuery: false,
hostRedirect: "string",
httpsRedirect: false,
pathRedirect: "string",
prefixRedirect: "string",
redirectResponseCode: "string",
},
description: "string",
headerAction: {
requestHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
requestHeadersToRemoves: ["string"],
responseHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
responseHeadersToRemoves: ["string"],
},
pathRules: [{
paths: ["string"],
customErrorResponsePolicy: {
errorResponseRules: [{
matchResponseCodes: ["string"],
overrideResponseCode: 0,
path: "string",
}],
errorService: "string",
},
routeAction: {
corsPolicy: {
disabled: false,
allowCredentials: false,
allowHeaders: ["string"],
allowMethods: ["string"],
allowOriginRegexes: ["string"],
allowOrigins: ["string"],
exposeHeaders: ["string"],
maxAge: 0,
},
faultInjectionPolicy: {
abort: {
httpStatus: 0,
percentage: 0,
},
delay: {
fixedDelay: {
seconds: "string",
nanos: 0,
},
percentage: 0,
},
},
requestMirrorPolicy: {
backendService: "string",
},
retryPolicy: {
numRetries: 0,
perTryTimeout: {
seconds: "string",
nanos: 0,
},
retryConditions: ["string"],
},
timeout: {
seconds: "string",
nanos: 0,
},
urlRewrite: {
hostRewrite: "string",
pathPrefixRewrite: "string",
},
weightedBackendServices: [{
backendService: "string",
weight: 0,
headerAction: {
requestHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
requestHeadersToRemoves: ["string"],
responseHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
responseHeadersToRemoves: ["string"],
},
}],
},
service: "string",
urlRedirect: {
stripQuery: false,
hostRedirect: "string",
httpsRedirect: false,
pathRedirect: "string",
prefixRedirect: "string",
redirectResponseCode: "string",
},
}],
routeRules: [{
priority: 0,
headerAction: {
requestHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
requestHeadersToRemoves: ["string"],
responseHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
responseHeadersToRemoves: ["string"],
},
matchRules: [{
fullPathMatch: "string",
headerMatches: [{
headerName: "string",
exactMatch: "string",
invertMatch: false,
prefixMatch: "string",
presentMatch: false,
rangeMatch: {
rangeEnd: 0,
rangeStart: 0,
},
regexMatch: "string",
suffixMatch: "string",
}],
ignoreCase: false,
metadataFilters: [{
filterLabels: [{
name: "string",
value: "string",
}],
filterMatchCriteria: "string",
}],
pathTemplateMatch: "string",
prefixMatch: "string",
queryParameterMatches: [{
name: "string",
exactMatch: "string",
presentMatch: false,
regexMatch: "string",
}],
regexMatch: "string",
}],
routeAction: {
corsPolicy: {
allowCredentials: false,
allowHeaders: ["string"],
allowMethods: ["string"],
allowOriginRegexes: ["string"],
allowOrigins: ["string"],
disabled: false,
exposeHeaders: ["string"],
maxAge: 0,
},
faultInjectionPolicy: {
abort: {
httpStatus: 0,
percentage: 0,
},
delay: {
fixedDelay: {
seconds: "string",
nanos: 0,
},
percentage: 0,
},
},
requestMirrorPolicy: {
backendService: "string",
},
retryPolicy: {
numRetries: 0,
perTryTimeout: {
seconds: "string",
nanos: 0,
},
retryConditions: ["string"],
},
timeout: {
seconds: "string",
nanos: 0,
},
urlRewrite: {
hostRewrite: "string",
pathPrefixRewrite: "string",
pathTemplateRewrite: "string",
},
weightedBackendServices: [{
backendService: "string",
weight: 0,
headerAction: {
requestHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
requestHeadersToRemoves: ["string"],
responseHeadersToAdds: [{
headerName: "string",
headerValue: "string",
replace: false,
}],
responseHeadersToRemoves: ["string"],
},
}],
},
service: "string",
urlRedirect: {
hostRedirect: "string",
httpsRedirect: false,
pathRedirect: "string",
prefixRedirect: "string",
redirectResponseCode: "string",
stripQuery: false,
},
}],
}],
project: "string",
tests: [{
host: "string",
path: "string",
service: "string",
description: "string",
}],
});
type: gcp:compute:URLMap
properties:
defaultCustomErrorResponsePolicy:
errorResponseRules:
- matchResponseCodes:
- string
overrideResponseCode: 0
path: string
errorService: string
defaultRouteAction:
corsPolicy:
allowCredentials: false
allowHeaders:
- string
allowMethods:
- string
allowOriginRegexes:
- string
allowOrigins:
- string
disabled: false
exposeHeaders:
- string
maxAge: 0
faultInjectionPolicy:
abort:
httpStatus: 0
percentage: 0
delay:
fixedDelay:
nanos: 0
seconds: string
percentage: 0
requestMirrorPolicy:
backendService: string
retryPolicy:
numRetries: 0
perTryTimeout:
nanos: 0
seconds: string
retryConditions:
- string
timeout:
nanos: 0
seconds: string
urlRewrite:
hostRewrite: string
pathPrefixRewrite: string
weightedBackendServices:
- backendService: string
headerAction:
requestHeadersToAdds:
- headerName: string
headerValue: string
replace: false
requestHeadersToRemoves:
- string
responseHeadersToAdds:
- headerName: string
headerValue: string
replace: false
responseHeadersToRemoves:
- string
weight: 0
defaultService: string
defaultUrlRedirect:
hostRedirect: string
httpsRedirect: false
pathRedirect: string
prefixRedirect: string
redirectResponseCode: string
stripQuery: false
description: string
headerAction:
requestHeadersToAdds:
- headerName: string
headerValue: string
replace: false
requestHeadersToRemoves:
- string
responseHeadersToAdds:
- headerName: string
headerValue: string
replace: false
responseHeadersToRemoves:
- string
hostRules:
- description: string
hosts:
- string
pathMatcher: string
name: string
pathMatchers:
- defaultCustomErrorResponsePolicy:
errorResponseRules:
- matchResponseCodes:
- string
overrideResponseCode: 0
path: string
errorService: string
defaultRouteAction:
corsPolicy:
allowCredentials: false
allowHeaders:
- string
allowMethods:
- string
allowOriginRegexes:
- string
allowOrigins:
- string
disabled: false
exposeHeaders:
- string
maxAge: 0
faultInjectionPolicy:
abort:
httpStatus: 0
percentage: 0
delay:
fixedDelay:
nanos: 0
seconds: string
percentage: 0
requestMirrorPolicy:
backendService: string
retryPolicy:
numRetries: 0
perTryTimeout:
nanos: 0
seconds: string
retryConditions:
- string
timeout:
nanos: 0
seconds: string
urlRewrite:
hostRewrite: string
pathPrefixRewrite: string
weightedBackendServices:
- backendService: string
headerAction:
requestHeadersToAdds:
- headerName: string
headerValue: string
replace: false
requestHeadersToRemoves:
- string
responseHeadersToAdds:
- headerName: string
headerValue: string
replace: false
responseHeadersToRemoves:
- string
weight: 0
defaultService: string
defaultUrlRedirect:
hostRedirect: string
httpsRedirect: false
pathRedirect: string
prefixRedirect: string
redirectResponseCode: string
stripQuery: false
description: string
headerAction:
requestHeadersToAdds:
- headerName: string
headerValue: string
replace: false
requestHeadersToRemoves:
- string
responseHeadersToAdds:
- headerName: string
headerValue: string
replace: false
responseHeadersToRemoves:
- string
name: string
pathRules:
- customErrorResponsePolicy:
errorResponseRules:
- matchResponseCodes:
- string
overrideResponseCode: 0
path: string
errorService: string
paths:
- string
routeAction:
corsPolicy:
allowCredentials: false
allowHeaders:
- string
allowMethods:
- string
allowOriginRegexes:
- string
allowOrigins:
- string
disabled: false
exposeHeaders:
- string
maxAge: 0
faultInjectionPolicy:
abort:
httpStatus: 0
percentage: 0
delay:
fixedDelay:
nanos: 0
seconds: string
percentage: 0
requestMirrorPolicy:
backendService: string
retryPolicy:
numRetries: 0
perTryTimeout:
nanos: 0
seconds: string
retryConditions:
- string
timeout:
nanos: 0
seconds: string
urlRewrite:
hostRewrite: string
pathPrefixRewrite: string
weightedBackendServices:
- backendService: string
headerAction:
requestHeadersToAdds:
- headerName: string
headerValue: string
replace: false
requestHeadersToRemoves:
- string
responseHeadersToAdds:
- headerName: string
headerValue: string
replace: false
responseHeadersToRemoves:
- string
weight: 0
service: string
urlRedirect:
hostRedirect: string
httpsRedirect: false
pathRedirect: string
prefixRedirect: string
redirectResponseCode: string
stripQuery: false
routeRules:
- headerAction:
requestHeadersToAdds:
- headerName: string
headerValue: string
replace: false
requestHeadersToRemoves:
- string
responseHeadersToAdds:
- headerName: string
headerValue: string
replace: false
responseHeadersToRemoves:
- string
matchRules:
- fullPathMatch: string
headerMatches:
- exactMatch: string
headerName: string
invertMatch: false
prefixMatch: string
presentMatch: false
rangeMatch:
rangeEnd: 0
rangeStart: 0
regexMatch: string
suffixMatch: string
ignoreCase: false
metadataFilters:
- filterLabels:
- name: string
value: string
filterMatchCriteria: string
pathTemplateMatch: string
prefixMatch: string
queryParameterMatches:
- exactMatch: string
name: string
presentMatch: false
regexMatch: string
regexMatch: string
priority: 0
routeAction:
corsPolicy:
allowCredentials: false
allowHeaders:
- string
allowMethods:
- string
allowOriginRegexes:
- string
allowOrigins:
- string
disabled: false
exposeHeaders:
- string
maxAge: 0
faultInjectionPolicy:
abort:
httpStatus: 0
percentage: 0
delay:
fixedDelay:
nanos: 0
seconds: string
percentage: 0
requestMirrorPolicy:
backendService: string
retryPolicy:
numRetries: 0
perTryTimeout:
nanos: 0
seconds: string
retryConditions:
- string
timeout:
nanos: 0
seconds: string
urlRewrite:
hostRewrite: string
pathPrefixRewrite: string
pathTemplateRewrite: string
weightedBackendServices:
- backendService: string
headerAction:
requestHeadersToAdds:
- headerName: string
headerValue: string
replace: false
requestHeadersToRemoves:
- string
responseHeadersToAdds:
- headerName: string
headerValue: string
replace: false
responseHeadersToRemoves:
- string
weight: 0
service: string
urlRedirect:
hostRedirect: string
httpsRedirect: false
pathRedirect: string
prefixRedirect: string
redirectResponseCode: string
stripQuery: false
project: string
tests:
- description: string
host: string
path: string
service: string
URLMap Resource Properties
To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.
Inputs
In Python, inputs that are objects can be passed either as argument classes or as dictionary literals.
The URLMap resource accepts the following input properties:
- Default
Custom URLMapError Response Policy Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- Default
Route URLMapAction Default Route Action - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- Default
Service string - The backend service or backend bucket to use when none of the given rules match.
- Default
Url URLMapRedirect Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- Description string
- An optional description of this resource. Provide this property when you create the resource.
- Header
Action URLMapHeader Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- Host
Rules List<URLMapHost Rule> - The list of HostRules to use against the URL. Structure is documented below.
- Name string
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - Path
Matchers List<URLMapPath Matcher> - The list of named PathMatchers to use against the URL. Structure is documented below.
- Project string
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- Tests
List<URLMap
Test> - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- Default
Custom URLMapError Response Policy Default Custom Error Response Policy Args - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- Default
Route URLMapAction Default Route Action Args - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- Default
Service string - The backend service or backend bucket to use when none of the given rules match.
- Default
Url URLMapRedirect Default Url Redirect Args - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- Description string
- An optional description of this resource. Provide this property when you create the resource.
- Header
Action URLMapHeader Action Args - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- Host
Rules []URLMapHost Rule Args - The list of HostRules to use against the URL. Structure is documented below.
- Name string
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - Path
Matchers []URLMapPath Matcher Args - The list of named PathMatchers to use against the URL. Structure is documented below.
- Project string
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- Tests
[]URLMap
Test Args - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- default
Custom URLMapError Response Policy Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default
Route URLMapAction Default Route Action - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default
Service String - The backend service or backend bucket to use when none of the given rules match.
- default
Url URLMapRedirect Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description String
- An optional description of this resource. Provide this property when you create the resource.
- header
Action URLMapHeader Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- host
Rules List<URLMapHost Rule> - The list of HostRules to use against the URL. Structure is documented below.
- name String
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - path
Matchers List<URLMapPath Matcher> - The list of named PathMatchers to use against the URL. Structure is documented below.
- project String
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- tests
List<URLMap
Test> - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- default
Custom URLMapError Response Policy Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default
Route URLMapAction Default Route Action - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default
Service string - The backend service or backend bucket to use when none of the given rules match.
- default
Url URLMapRedirect Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description string
- An optional description of this resource. Provide this property when you create the resource.
- header
Action URLMapHeader Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- host
Rules URLMapHost Rule[] - The list of HostRules to use against the URL. Structure is documented below.
- name string
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - path
Matchers URLMapPath Matcher[] - The list of named PathMatchers to use against the URL. Structure is documented below.
- project string
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- tests
URLMap
Test[] - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- default_
custom_ URLMaperror_ response_ policy Default Custom Error Response Policy Args - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default_
route_ URLMapaction Default Route Action Args - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default_
service str - The backend service or backend bucket to use when none of the given rules match.
- default_
url_ URLMapredirect Default Url Redirect Args - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description str
- An optional description of this resource. Provide this property when you create the resource.
- header_
action URLMapHeader Action Args - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- host_
rules Sequence[URLMapHost Rule Args] - The list of HostRules to use against the URL. Structure is documented below.
- name str
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - path_
matchers Sequence[URLMapPath Matcher Args] - The list of named PathMatchers to use against the URL. Structure is documented below.
- project str
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- tests
Sequence[URLMap
Test Args] - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- default
Custom Property MapError Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default
Route Property MapAction - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default
Service String - The backend service or backend bucket to use when none of the given rules match.
- default
Url Property MapRedirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description String
- An optional description of this resource. Provide this property when you create the resource.
- header
Action Property Map - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- host
Rules List<Property Map> - The list of HostRules to use against the URL. Structure is documented below.
- name String
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - path
Matchers List<Property Map> - The list of named PathMatchers to use against the URL. Structure is documented below.
- project String
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- tests List<Property Map>
- The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
Outputs
All input properties are implicitly available as output properties. Additionally, the URLMap resource produces the following output properties:
- Creation
Timestamp string - Creation timestamp in RFC3339 text format.
- Fingerprint string
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- Id string
- The provider-assigned unique ID for this managed resource.
- Map
Id int - The unique identifier for the resource.
- Self
Link string - The URI of the created resource.
- Creation
Timestamp string - Creation timestamp in RFC3339 text format.
- Fingerprint string
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- Id string
- The provider-assigned unique ID for this managed resource.
- Map
Id int - The unique identifier for the resource.
- Self
Link string - The URI of the created resource.
- creation
Timestamp String - Creation timestamp in RFC3339 text format.
- fingerprint String
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- id String
- The provider-assigned unique ID for this managed resource.
- map
Id Integer - The unique identifier for the resource.
- self
Link String - The URI of the created resource.
- creation
Timestamp string - Creation timestamp in RFC3339 text format.
- fingerprint string
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- id string
- The provider-assigned unique ID for this managed resource.
- map
Id number - The unique identifier for the resource.
- self
Link string - The URI of the created resource.
- creation_
timestamp str - Creation timestamp in RFC3339 text format.
- fingerprint str
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- id str
- The provider-assigned unique ID for this managed resource.
- map_
id int - The unique identifier for the resource.
- self_
link str - The URI of the created resource.
- creation
Timestamp String - Creation timestamp in RFC3339 text format.
- fingerprint String
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- id String
- The provider-assigned unique ID for this managed resource.
- map
Id Number - The unique identifier for the resource.
- self
Link String - The URI of the created resource.
Look up Existing URLMap Resource
Get an existing URLMap resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.
public static get(name: string, id: Input<ID>, state?: URLMapState, opts?: CustomResourceOptions): URLMap@staticmethod
def get(resource_name: str,
id: str,
opts: Optional[ResourceOptions] = None,
creation_timestamp: Optional[str] = None,
default_custom_error_response_policy: Optional[URLMapDefaultCustomErrorResponsePolicyArgs] = None,
default_route_action: Optional[URLMapDefaultRouteActionArgs] = None,
default_service: Optional[str] = None,
default_url_redirect: Optional[URLMapDefaultUrlRedirectArgs] = None,
description: Optional[str] = None,
fingerprint: Optional[str] = None,
header_action: Optional[URLMapHeaderActionArgs] = None,
host_rules: Optional[Sequence[URLMapHostRuleArgs]] = None,
map_id: Optional[int] = None,
name: Optional[str] = None,
path_matchers: Optional[Sequence[URLMapPathMatcherArgs]] = None,
project: Optional[str] = None,
self_link: Optional[str] = None,
tests: Optional[Sequence[URLMapTestArgs]] = None) -> URLMapfunc GetURLMap(ctx *Context, name string, id IDInput, state *URLMapState, opts ...ResourceOption) (*URLMap, error)public static URLMap Get(string name, Input<string> id, URLMapState? state, CustomResourceOptions? opts = null)public static URLMap get(String name, Output<String> id, URLMapState state, CustomResourceOptions options)Resource lookup is not supported in YAML- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- resource_name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- Creation
Timestamp string - Creation timestamp in RFC3339 text format.
- Default
Custom URLMapError Response Policy Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- Default
Route URLMapAction Default Route Action - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- Default
Service string - The backend service or backend bucket to use when none of the given rules match.
- Default
Url URLMapRedirect Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- Description string
- An optional description of this resource. Provide this property when you create the resource.
- Fingerprint string
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- Header
Action URLMapHeader Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- Host
Rules List<URLMapHost Rule> - The list of HostRules to use against the URL. Structure is documented below.
- Map
Id int - The unique identifier for the resource.
- Name string
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - Path
Matchers List<URLMapPath Matcher> - The list of named PathMatchers to use against the URL. Structure is documented below.
- Project string
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- Self
Link string - The URI of the created resource.
- Tests
List<URLMap
Test> - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- Creation
Timestamp string - Creation timestamp in RFC3339 text format.
- Default
Custom URLMapError Response Policy Default Custom Error Response Policy Args - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- Default
Route URLMapAction Default Route Action Args - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- Default
Service string - The backend service or backend bucket to use when none of the given rules match.
- Default
Url URLMapRedirect Default Url Redirect Args - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- Description string
- An optional description of this resource. Provide this property when you create the resource.
- Fingerprint string
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- Header
Action URLMapHeader Action Args - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- Host
Rules []URLMapHost Rule Args - The list of HostRules to use against the URL. Structure is documented below.
- Map
Id int - The unique identifier for the resource.
- Name string
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - Path
Matchers []URLMapPath Matcher Args - The list of named PathMatchers to use against the URL. Structure is documented below.
- Project string
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- Self
Link string - The URI of the created resource.
- Tests
[]URLMap
Test Args - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- creation
Timestamp String - Creation timestamp in RFC3339 text format.
- default
Custom URLMapError Response Policy Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default
Route URLMapAction Default Route Action - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default
Service String - The backend service or backend bucket to use when none of the given rules match.
- default
Url URLMapRedirect Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description String
- An optional description of this resource. Provide this property when you create the resource.
- fingerprint String
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- header
Action URLMapHeader Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- host
Rules List<URLMapHost Rule> - The list of HostRules to use against the URL. Structure is documented below.
- map
Id Integer - The unique identifier for the resource.
- name String
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - path
Matchers List<URLMapPath Matcher> - The list of named PathMatchers to use against the URL. Structure is documented below.
- project String
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- self
Link String - The URI of the created resource.
- tests
List<URLMap
Test> - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- creation
Timestamp string - Creation timestamp in RFC3339 text format.
- default
Custom URLMapError Response Policy Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default
Route URLMapAction Default Route Action - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default
Service string - The backend service or backend bucket to use when none of the given rules match.
- default
Url URLMapRedirect Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description string
- An optional description of this resource. Provide this property when you create the resource.
- fingerprint string
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- header
Action URLMapHeader Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- host
Rules URLMapHost Rule[] - The list of HostRules to use against the URL. Structure is documented below.
- map
Id number - The unique identifier for the resource.
- name string
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - path
Matchers URLMapPath Matcher[] - The list of named PathMatchers to use against the URL. Structure is documented below.
- project string
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- self
Link string - The URI of the created resource.
- tests
URLMap
Test[] - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- creation_
timestamp str - Creation timestamp in RFC3339 text format.
- default_
custom_ URLMaperror_ response_ policy Default Custom Error Response Policy Args - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default_
route_ URLMapaction Default Route Action Args - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default_
service str - The backend service or backend bucket to use when none of the given rules match.
- default_
url_ URLMapredirect Default Url Redirect Args - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description str
- An optional description of this resource. Provide this property when you create the resource.
- fingerprint str
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- header_
action URLMapHeader Action Args - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- host_
rules Sequence[URLMapHost Rule Args] - The list of HostRules to use against the URL. Structure is documented below.
- map_
id int - The unique identifier for the resource.
- name str
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - path_
matchers Sequence[URLMapPath Matcher Args] - The list of named PathMatchers to use against the URL. Structure is documented below.
- project str
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- self_
link str - The URI of the created resource.
- tests
Sequence[URLMap
Test Args] - The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
- creation
Timestamp String - Creation timestamp in RFC3339 text format.
- default
Custom Property MapError Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default
Route Property MapAction - defaultRouteAction takes effect when none of the hostRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default
Service String - The backend service or backend bucket to use when none of the given rules match.
- default
Url Property MapRedirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description String
- An optional description of this resource. Provide this property when you create the resource.
- fingerprint String
- Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking.
- header
Action Property Map - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here take effect after headerAction specified under pathMatcher. Structure is documented below.
- host
Rules List<Property Map> - The list of HostRules to use against the URL. Structure is documented below.
- map
Id Number - The unique identifier for the resource.
- name String
- Name of the resource. Provided by the client when the resource is created. The
name must be 1-63 characters long, and comply with RFC1035. Specifically, the
name must be 1-63 characters long and match the regular expression
a-z?which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash. - path
Matchers List<Property Map> - The list of named PathMatchers to use against the URL. Structure is documented below.
- project String
- The ID of the project in which the resource belongs. If it is not provided, the provider project is used.
- self
Link String - The URI of the created resource.
- tests List<Property Map>
- The list of expected URL mapping tests. Request to update this UrlMap will succeed only if all of the test cases pass. You can specify a maximum of 100 tests per UrlMap. Structure is documented below.
Supporting Types
URLMapDefaultCustomErrorResponsePolicy, URLMapDefaultCustomErrorResponsePolicyArgs
- Error
Response List<URLMapRules Default Custom Error Response Policy Error Response Rule> - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- Error
Service string - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- Error
Response []URLMapRules Default Custom Error Response Policy Error Response Rule - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- Error
Service string - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error
Response List<URLMapRules Default Custom Error Response Policy Error Response Rule> - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error
Service String - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error
Response URLMapRules Default Custom Error Response Policy Error Response Rule[] - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error
Service string - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error_
response_ Sequence[URLMaprules Default Custom Error Response Policy Error Response Rule] - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error_
service str - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error
Response List<Property Map>Rules - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error
Service String - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
URLMapDefaultCustomErrorResponsePolicyErrorResponseRule, URLMapDefaultCustomErrorResponsePolicyErrorResponseRuleArgs
- Match
Response List<string>Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- Override
Response intCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- Path string
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- Match
Response []stringCodes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- Override
Response intCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- Path string
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match
Response List<String>Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override
Response IntegerCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path String
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match
Response string[]Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override
Response numberCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path string
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match_
response_ Sequence[str]codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override_
response_ intcode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path str
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match
Response List<String>Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override
Response NumberCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path String
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
URLMapDefaultRouteAction, URLMapDefaultRouteActionArgs
- Cors
Policy URLMapDefault Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- Fault
Injection URLMapPolicy Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- Request
Mirror URLMapPolicy Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- Retry
Policy URLMapDefault Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- Timeout
URLMap
Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Url
Rewrite URLMapDefault Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- Weighted
Backend List<URLMapServices Default Route Action Weighted Backend Service> - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- Cors
Policy URLMapDefault Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- Fault
Injection URLMapPolicy Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- Request
Mirror URLMapPolicy Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- Retry
Policy URLMapDefault Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- Timeout
URLMap
Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Url
Rewrite URLMapDefault Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- Weighted
Backend []URLMapServices Default Route Action Weighted Backend Service - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy URLMapDefault Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection URLMapPolicy Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- request
Mirror URLMapPolicy Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy URLMapDefault Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- url
Rewrite URLMapDefault Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- weighted
Backend List<URLMapServices Default Route Action Weighted Backend Service> - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy URLMapDefault Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection URLMapPolicy Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- request
Mirror URLMapPolicy Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy URLMapDefault Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- url
Rewrite URLMapDefault Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- weighted
Backend URLMapServices Default Route Action Weighted Backend Service[] - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors_
policy URLMapDefault Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault_
injection_ URLMappolicy Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- request_
mirror_ URLMappolicy Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry_
policy URLMapDefault Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- url_
rewrite URLMapDefault Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- weighted_
backend_ Sequence[URLMapservices Default Route Action Weighted Backend Service] - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy Property Map - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection Property MapPolicy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- request
Mirror Property MapPolicy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy Property Map - Specifies the retry policy associated with this route. Structure is documented below.
- timeout Property Map
- Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- url
Rewrite Property Map - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- weighted
Backend List<Property Map>Services - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
URLMapDefaultRouteActionCorsPolicy, URLMapDefaultRouteActionCorsPolicyArgs
- Allow
Credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- Allow
Headers List<string> - Specifies the content for the Access-Control-Allow-Headers header.
- Allow
Methods List<string> - Specifies the content for the Access-Control-Allow-Methods header.
- Allow
Origin List<string>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Allow
Origins List<string> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- Expose
Headers List<string> - Specifies the content for the Access-Control-Expose-Headers header.
- Max
Age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- Allow
Credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- Allow
Headers []string - Specifies the content for the Access-Control-Allow-Headers header.
- Allow
Methods []string - Specifies the content for the Access-Control-Allow-Methods header.
- Allow
Origin []stringRegexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Allow
Origins []string - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- Expose
Headers []string - Specifies the content for the Access-Control-Expose-Headers header.
- Max
Age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow
Credentials Boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers List<String> - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods List<String> - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin List<String>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins List<String> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled Boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose
Headers List<String> - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age Integer - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow
Credentials boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers string[] - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods string[] - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin string[]Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins string[] - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose
Headers string[] - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age number - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow_
credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow_
headers Sequence[str] - Specifies the content for the Access-Control-Allow-Headers header.
- allow_
methods Sequence[str] - Specifies the content for the Access-Control-Allow-Methods header.
- allow_
origin_ Sequence[str]regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow_
origins Sequence[str] - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose_
headers Sequence[str] - Specifies the content for the Access-Control-Expose-Headers header.
- max_
age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow
Credentials Boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers List<String> - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods List<String> - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin List<String>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins List<String> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled Boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose
Headers List<String> - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age Number - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
URLMapDefaultRouteActionFaultInjectionPolicy, URLMapDefaultRouteActionFaultInjectionPolicyArgs
- Abort
URLMap
Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- Delay
URLMap
Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- Abort
URLMap
Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- Delay
URLMap
Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort Property Map
- The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay Property Map
- The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
URLMapDefaultRouteActionFaultInjectionPolicyAbort, URLMapDefaultRouteActionFaultInjectionPolicyAbortArgs
- Http
Status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- Percentage double
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- Http
Status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- Percentage float64
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status Integer - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage Double
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status number - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage number
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http_
status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage float
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status Number - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage Number
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
URLMapDefaultRouteActionFaultInjectionPolicyDelay, URLMapDefaultRouteActionFaultInjectionPolicyDelayArgs
- Fixed
Delay URLMapDefault Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- Percentage double
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- Fixed
Delay URLMapDefault Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- Percentage float64
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay URLMapDefault Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage Double
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay URLMapDefault Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage number
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed_
delay URLMapDefault Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage float
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay Property Map - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage Number
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
URLMapDefaultRouteActionFaultInjectionPolicyDelayFixedDelay, URLMapDefaultRouteActionFaultInjectionPolicyDelayFixedDelayArgs
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
URLMapDefaultRouteActionRequestMirrorPolicy, URLMapDefaultRouteActionRequestMirrorPolicyArgs
- Backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- Backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service String - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- backend_
service str - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service String - The full or partial URL to the BackendService resource being mirrored to.
URLMapDefaultRouteActionRetryPolicy, URLMapDefaultRouteActionRetryPolicyArgs
- Num
Retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- Per
Try URLMapTimeout Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Retry
Conditions List<string> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- Num
Retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- Per
Try URLMapTimeout Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Retry
Conditions []string - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries Integer - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try URLMapTimeout Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions List<String> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries number - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try URLMapTimeout Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions string[] - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num_
retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per_
try_ URLMaptimeout Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry_
conditions Sequence[str] - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries Number - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try Property MapTimeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions List<String> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
URLMapDefaultRouteActionRetryPolicyPerTryTimeout, URLMapDefaultRouteActionRetryPolicyPerTryTimeoutArgs
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
URLMapDefaultRouteActionTimeout, URLMapDefaultRouteActionTimeoutArgs
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
URLMapDefaultRouteActionUrlRewrite, URLMapDefaultRouteActionUrlRewriteArgs
- Host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- Path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- Host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- Path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host
Rewrite String - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix StringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host_
rewrite str - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path_
prefix_ strrewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host
Rewrite String - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix StringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
URLMapDefaultRouteActionWeightedBackendService, URLMapDefaultRouteActionWeightedBackendServiceArgs
- Backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- Header
Action URLMapDefault Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- Weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- Backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- Header
Action URLMapDefault Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- Weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- backend
Service String - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- header
Action URLMapDefault Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- weight Integer
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- header
Action URLMapDefault Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- weight number
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- backend_
service str - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- header_
action URLMapDefault Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- backend
Service String - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- header
Action Property Map - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- weight Number
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
URLMapDefaultRouteActionWeightedBackendServiceHeaderAction, URLMapDefaultRouteActionWeightedBackendServiceHeaderActionArgs
- Request
Headers List<URLMapTo Adds Default Route Action Weighted Backend Service Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers List<string>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers List<URLMapTo Adds Default Route Action Weighted Backend Service Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers List<string>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- Request
Headers []URLMapTo Adds Default Route Action Weighted Backend Service Header Action Request Headers To Add - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers []stringTo Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers []URLMapTo Adds Default Route Action Weighted Backend Service Header Action Response Headers To Add - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers []stringTo Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<URLMapTo Adds Default Route Action Weighted Backend Service Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<URLMapTo Adds Default Route Action Weighted Backend Service Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers URLMapTo Adds Default Route Action Weighted Backend Service Header Action Request Headers To Add[] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers string[]To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers URLMapTo Adds Default Route Action Weighted Backend Service Header Action Response Headers To Add[] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers string[]To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request_
headers_ Sequence[URLMapto_ adds Default Route Action Weighted Backend Service Header Action Request Headers To Add] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response_
headers_ Sequence[URLMapto_ adds Default Route Action Weighted Backend Service Header Action Response Headers To Add] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<Property Map>To Adds - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<Property Map>To Adds - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
URLMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd, URLMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd, URLMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapDefaultUrlRedirect, URLMapDefaultUrlRedirectArgs
- Strip
Query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- Host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- Https
Redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- Path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- Prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- Redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- Strip
Query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- Host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- Https
Redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- Path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- Prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- Redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query Boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- host
Redirect String - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect Boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- path
Redirect String - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- prefix
Redirect String - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- redirect
Response StringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip_
query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- host_
redirect str - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https_
redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- path_
redirect str - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- prefix_
redirect str - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- redirect_
response_ strcode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query Boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- host
Redirect String - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect Boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- path
Redirect String - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- prefix
Redirect String - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- redirect
Response StringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
URLMapHeaderAction, URLMapHeaderActionArgs
- Request
Headers List<URLMapTo Adds Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers List<string>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers List<URLMapTo Adds Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers List<string>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- Request
Headers []URLMapTo Adds Header Action Request Headers To Add - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers []stringTo Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers []URLMapTo Adds Header Action Response Headers To Add - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers []stringTo Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<URLMapTo Adds Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<URLMapTo Adds Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers URLMapTo Adds Header Action Request Headers To Add[] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers string[]To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers URLMapTo Adds Header Action Response Headers To Add[] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers string[]To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request_
headers_ Sequence[URLMapto_ adds Header Action Request Headers To Add] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response_
headers_ Sequence[URLMapto_ adds Header Action Response Headers To Add] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<Property Map>To Adds - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<Property Map>To Adds - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
URLMapHeaderActionRequestHeadersToAdd, URLMapHeaderActionRequestHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapHeaderActionResponseHeadersToAdd, URLMapHeaderActionResponseHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapHostRule, URLMapHostRuleArgs
- Hosts List<string>
- The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
- Path
Matcher string - The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
- Description string
- An optional description of this resource. Provide this property when you create the resource.
- Hosts []string
- The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
- Path
Matcher string - The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
- Description string
- An optional description of this resource. Provide this property when you create the resource.
- hosts List<String>
- The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
- path
Matcher String - The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
- description String
- An optional description of this resource. Provide this property when you create the resource.
- hosts string[]
- The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
- path
Matcher string - The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
- description string
- An optional description of this resource. Provide this property when you create the resource.
- hosts Sequence[str]
- The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
- path_
matcher str - The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
- description str
- An optional description of this resource. Provide this property when you create the resource.
- hosts List<String>
- The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
- path
Matcher String - The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
- description String
- An optional description of this resource. Provide this property when you create the resource.
URLMapPathMatcher, URLMapPathMatcherArgs
- Name string
- The name to which this PathMatcher is referred by the HostRule.
- Default
Custom URLMapError Response Policy Path Matcher Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- Default
Route URLMapAction Path Matcher Default Route Action - defaultRouteAction takes effect when none of the pathRules or routeRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- Default
Service string - The backend service or backend bucket to use when none of the given paths match.
- Default
Url URLMapRedirect Path Matcher Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- Description string
- An optional description of this resource. Provide this property when you create the resource.
- Header
Action URLMapPath Matcher Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. HeaderAction specified here are applied after the matching HttpRouteRule HeaderAction and before the HeaderAction in the UrlMap Structure is documented below.
- Path
Rules List<URLMapPath Matcher Path Rule> - The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
- Route
Rules List<URLMapPath Matcher Route Rule> - The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.
- Name string
- The name to which this PathMatcher is referred by the HostRule.
- Default
Custom URLMapError Response Policy Path Matcher Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- Default
Route URLMapAction Path Matcher Default Route Action - defaultRouteAction takes effect when none of the pathRules or routeRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- Default
Service string - The backend service or backend bucket to use when none of the given paths match.
- Default
Url URLMapRedirect Path Matcher Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- Description string
- An optional description of this resource. Provide this property when you create the resource.
- Header
Action URLMapPath Matcher Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. HeaderAction specified here are applied after the matching HttpRouteRule HeaderAction and before the HeaderAction in the UrlMap Structure is documented below.
- Path
Rules []URLMapPath Matcher Path Rule - The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
- Route
Rules []URLMapPath Matcher Route Rule - The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.
- name String
- The name to which this PathMatcher is referred by the HostRule.
- default
Custom URLMapError Response Policy Path Matcher Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default
Route URLMapAction Path Matcher Default Route Action - defaultRouteAction takes effect when none of the pathRules or routeRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default
Service String - The backend service or backend bucket to use when none of the given paths match.
- default
Url URLMapRedirect Path Matcher Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description String
- An optional description of this resource. Provide this property when you create the resource.
- header
Action URLMapPath Matcher Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. HeaderAction specified here are applied after the matching HttpRouteRule HeaderAction and before the HeaderAction in the UrlMap Structure is documented below.
- path
Rules List<URLMapPath Matcher Path Rule> - The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
- route
Rules List<URLMapPath Matcher Route Rule> - The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.
- name string
- The name to which this PathMatcher is referred by the HostRule.
- default
Custom URLMapError Response Policy Path Matcher Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default
Route URLMapAction Path Matcher Default Route Action - defaultRouteAction takes effect when none of the pathRules or routeRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default
Service string - The backend service or backend bucket to use when none of the given paths match.
- default
Url URLMapRedirect Path Matcher Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description string
- An optional description of this resource. Provide this property when you create the resource.
- header
Action URLMapPath Matcher Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. HeaderAction specified here are applied after the matching HttpRouteRule HeaderAction and before the HeaderAction in the UrlMap Structure is documented below.
- path
Rules URLMapPath Matcher Path Rule[] - The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
- route
Rules URLMapPath Matcher Route Rule[] - The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.
- name str
- The name to which this PathMatcher is referred by the HostRule.
- default_
custom_ URLMaperror_ response_ policy Path Matcher Default Custom Error Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default_
route_ URLMapaction Path Matcher Default Route Action - defaultRouteAction takes effect when none of the pathRules or routeRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default_
service str - The backend service or backend bucket to use when none of the given paths match.
- default_
url_ URLMapredirect Path Matcher Default Url Redirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description str
- An optional description of this resource. Provide this property when you create the resource.
- header_
action URLMapPath Matcher Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. HeaderAction specified here are applied after the matching HttpRouteRule HeaderAction and before the HeaderAction in the UrlMap Structure is documented below.
- path_
rules Sequence[URLMapPath Matcher Path Rule] - The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
- route_
rules Sequence[URLMapPath Matcher Route Rule] - The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.
- name String
- The name to which this PathMatcher is referred by the HostRule.
- default
Custom Property MapError Response Policy - defaultCustomErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. This policy takes effect at the PathMatcher level and applies only when no policy has been defined for the error code at lower levels like RouteRule and PathRule within this PathMatcher. If an error code does not have a policy defined in defaultCustomErrorResponsePolicy, then a policy defined for the error code in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy is configured with policies for 5xx and 4xx errors A RouteRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in RouteRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. When used in conjunction with pathMatcher.defaultRouteAction.retryPolicy, retries take precedence. Only once all retries are exhausted, the defaultCustomErrorResponsePolicy is applied. While attempting a retry, if load balancer is successful in reaching the service, the defaultCustomErrorResponsePolicy is ignored and the response from the service is returned to the client. defaultCustomErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- default
Route Property MapAction - defaultRouteAction takes effect when none of the pathRules or routeRules match. The load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If defaultRouteAction specifies any weightedBackendServices, defaultService must not be set. Conversely if defaultService is set, defaultRouteAction cannot contain any weightedBackendServices. Only one of defaultRouteAction or defaultUrlRedirect must be set. Structure is documented below.
- default
Service String - The backend service or backend bucket to use when none of the given paths match.
- default
Url Property MapRedirect - When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
- description String
- An optional description of this resource. Provide this property when you create the resource.
- header
Action Property Map - Specifies changes to request and response headers that need to take effect for the selected backendService. HeaderAction specified here are applied after the matching HttpRouteRule HeaderAction and before the HeaderAction in the UrlMap Structure is documented below.
- path
Rules List<Property Map> - The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
- route
Rules List<Property Map> - The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.
URLMapPathMatcherDefaultCustomErrorResponsePolicy, URLMapPathMatcherDefaultCustomErrorResponsePolicyArgs
- Error
Response List<URLMapRules Path Matcher Default Custom Error Response Policy Error Response Rule> - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- Error
Service string - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- Error
Response []URLMapRules Path Matcher Default Custom Error Response Policy Error Response Rule - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- Error
Service string - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error
Response List<URLMapRules Path Matcher Default Custom Error Response Policy Error Response Rule> - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error
Service String - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error
Response URLMapRules Path Matcher Default Custom Error Response Policy Error Response Rule[] - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error
Service string - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error_
response_ Sequence[URLMaprules Path Matcher Default Custom Error Response Policy Error Response Rule] - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error_
service str - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error
Response List<Property Map>Rules - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error
Service String - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRule, URLMapPathMatcherDefaultCustomErrorResponsePolicyErrorResponseRuleArgs
- Match
Response List<string>Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- Override
Response intCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- Path string
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- Match
Response []stringCodes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- Override
Response intCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- Path string
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match
Response List<String>Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override
Response IntegerCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path String
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match
Response string[]Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override
Response numberCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path string
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match_
response_ Sequence[str]codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override_
response_ intcode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path str
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match
Response List<String>Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override
Response NumberCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path String
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
URLMapPathMatcherDefaultRouteAction, URLMapPathMatcherDefaultRouteActionArgs
- Cors
Policy URLMapPath Matcher Default Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- Fault
Injection URLMapPolicy Path Matcher Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- Request
Mirror URLMapPolicy Path Matcher Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- Retry
Policy URLMapPath Matcher Default Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- Timeout
URLMap
Path Matcher Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Url
Rewrite URLMapPath Matcher Default Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- Weighted
Backend List<URLMapServices Path Matcher Default Route Action Weighted Backend Service> - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- Cors
Policy URLMapPath Matcher Default Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- Fault
Injection URLMapPolicy Path Matcher Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- Request
Mirror URLMapPolicy Path Matcher Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- Retry
Policy URLMapPath Matcher Default Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- Timeout
URLMap
Path Matcher Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Url
Rewrite URLMapPath Matcher Default Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- Weighted
Backend []URLMapServices Path Matcher Default Route Action Weighted Backend Service - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy URLMapPath Matcher Default Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection URLMapPolicy Path Matcher Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- request
Mirror URLMapPolicy Path Matcher Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy URLMapPath Matcher Default Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Path Matcher Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- url
Rewrite URLMapPath Matcher Default Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- weighted
Backend List<URLMapServices Path Matcher Default Route Action Weighted Backend Service> - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy URLMapPath Matcher Default Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection URLMapPolicy Path Matcher Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- request
Mirror URLMapPolicy Path Matcher Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy URLMapPath Matcher Default Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Path Matcher Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- url
Rewrite URLMapPath Matcher Default Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- weighted
Backend URLMapServices Path Matcher Default Route Action Weighted Backend Service[] - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors_
policy URLMapPath Matcher Default Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault_
injection_ URLMappolicy Path Matcher Default Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- request_
mirror_ URLMappolicy Path Matcher Default Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry_
policy URLMapPath Matcher Default Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Path Matcher Default Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- url_
rewrite URLMapPath Matcher Default Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- weighted_
backend_ Sequence[URLMapservices Path Matcher Default Route Action Weighted Backend Service] - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy Property Map - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection Property MapPolicy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retryPolicy will be ignored by clients that are configured with a faultInjectionPolicy. Structure is documented below.
- request
Mirror Property MapPolicy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy Property Map - Specifies the retry policy associated with this route. Structure is documented below.
- timeout Property Map
- Specifies the timeout for the selected route. Timeout is computed from the time the request has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- url
Rewrite Property Map - The spec to modify the URL of the request, prior to forwarding the request to the matched service. Structure is documented below.
- weighted
Backend List<Property Map>Services - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
URLMapPathMatcherDefaultRouteActionCorsPolicy, URLMapPathMatcherDefaultRouteActionCorsPolicyArgs
- Allow
Credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- Allow
Headers List<string> - Specifies the content for the Access-Control-Allow-Headers header.
- Allow
Methods List<string> - Specifies the content for the Access-Control-Allow-Methods header.
- Allow
Origin List<string>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Allow
Origins List<string> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- Expose
Headers List<string> - Specifies the content for the Access-Control-Expose-Headers header.
- Max
Age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- Allow
Credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- Allow
Headers []string - Specifies the content for the Access-Control-Allow-Headers header.
- Allow
Methods []string - Specifies the content for the Access-Control-Allow-Methods header.
- Allow
Origin []stringRegexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Allow
Origins []string - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- Expose
Headers []string - Specifies the content for the Access-Control-Expose-Headers header.
- Max
Age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow
Credentials Boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers List<String> - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods List<String> - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin List<String>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins List<String> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled Boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose
Headers List<String> - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age Integer - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow
Credentials boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers string[] - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods string[] - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin string[]Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins string[] - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose
Headers string[] - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age number - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow_
credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow_
headers Sequence[str] - Specifies the content for the Access-Control-Allow-Headers header.
- allow_
methods Sequence[str] - Specifies the content for the Access-Control-Allow-Methods header.
- allow_
origin_ Sequence[str]regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow_
origins Sequence[str] - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose_
headers Sequence[str] - Specifies the content for the Access-Control-Expose-Headers header.
- max_
age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow
Credentials Boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers List<String> - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods List<String> - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin List<String>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins List<String> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled Boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose
Headers List<String> - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age Number - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
URLMapPathMatcherDefaultRouteActionFaultInjectionPolicy, URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyArgs
- Abort
URLMap
Path Matcher Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- Delay
URLMap
Path Matcher Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- Abort
URLMap
Path Matcher Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- Delay
URLMap
Path Matcher Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Path Matcher Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Path Matcher Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Path Matcher Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Path Matcher Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Path Matcher Default Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Path Matcher Default Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort Property Map
- The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay Property Map
- The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyAbort, URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyAbortArgs
- Http
Status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- Percentage double
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- Http
Status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- Percentage float64
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status Integer - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage Double
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status number - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage number
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http_
status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage float
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status Number - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage Number
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelay, URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayArgs
- Fixed
Delay URLMapPath Matcher Default Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- Percentage double
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- Fixed
Delay URLMapPath Matcher Default Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- Percentage float64
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay URLMapPath Matcher Default Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage Double
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay URLMapPath Matcher Default Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage number
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed_
delay URLMapPath Matcher Default Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage float
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay Property Map - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage Number
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayFixedDelay, URLMapPathMatcherDefaultRouteActionFaultInjectionPolicyDelayFixedDelayArgs
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
URLMapPathMatcherDefaultRouteActionRequestMirrorPolicy, URLMapPathMatcherDefaultRouteActionRequestMirrorPolicyArgs
- Backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- Backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service String - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- backend_
service str - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service String - The full or partial URL to the BackendService resource being mirrored to.
URLMapPathMatcherDefaultRouteActionRetryPolicy, URLMapPathMatcherDefaultRouteActionRetryPolicyArgs
- Num
Retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- Per
Try URLMapTimeout Path Matcher Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Retry
Conditions List<string> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- Num
Retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- Per
Try URLMapTimeout Path Matcher Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Retry
Conditions []string - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries Integer - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try URLMapTimeout Path Matcher Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions List<String> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries number - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try URLMapTimeout Path Matcher Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions string[] - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num_
retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per_
try_ URLMaptimeout Path Matcher Default Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry_
conditions Sequence[str] - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries Number - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try Property MapTimeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions List<String> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
URLMapPathMatcherDefaultRouteActionRetryPolicyPerTryTimeout, URLMapPathMatcherDefaultRouteActionRetryPolicyPerTryTimeoutArgs
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
URLMapPathMatcherDefaultRouteActionTimeout, URLMapPathMatcherDefaultRouteActionTimeoutArgs
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
URLMapPathMatcherDefaultRouteActionUrlRewrite, URLMapPathMatcherDefaultRouteActionUrlRewriteArgs
- Host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- Path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- Host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- Path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host
Rewrite String - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix StringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host_
rewrite str - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path_
prefix_ strrewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host
Rewrite String - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix StringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
URLMapPathMatcherDefaultRouteActionWeightedBackendService, URLMapPathMatcherDefaultRouteActionWeightedBackendServiceArgs
- Backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- Header
Action URLMapPath Matcher Default Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- Weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- Backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- Header
Action URLMapPath Matcher Default Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- Weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- backend
Service String - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- header
Action URLMapPath Matcher Default Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- weight Integer
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- header
Action URLMapPath Matcher Default Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- weight number
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- backend_
service str - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- header_
action URLMapPath Matcher Default Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- backend
Service String - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- header
Action Property Map - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- weight Number
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderAction, URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionArgs
- Request
Headers List<URLMapTo Adds Path Matcher Default Route Action Weighted Backend Service Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers List<string>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers List<URLMapTo Adds Path Matcher Default Route Action Weighted Backend Service Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers List<string>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- Request
Headers []URLMapTo Adds Path Matcher Default Route Action Weighted Backend Service Header Action Request Headers To Add - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers []stringTo Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers []URLMapTo Adds Path Matcher Default Route Action Weighted Backend Service Header Action Response Headers To Add - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers []stringTo Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<URLMapTo Adds Path Matcher Default Route Action Weighted Backend Service Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<URLMapTo Adds Path Matcher Default Route Action Weighted Backend Service Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers URLMapTo Adds Path Matcher Default Route Action Weighted Backend Service Header Action Request Headers To Add[] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers string[]To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers URLMapTo Adds Path Matcher Default Route Action Weighted Backend Service Header Action Response Headers To Add[] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers string[]To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request_
headers_ Sequence[URLMapto_ adds Path Matcher Default Route Action Weighted Backend Service Header Action Request Headers To Add] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response_
headers_ Sequence[URLMapto_ adds Path Matcher Default Route Action Weighted Backend Service Header Action Response Headers To Add] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<Property Map>To Adds - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<Property Map>To Adds - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd, URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd, URLMapPathMatcherDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherDefaultUrlRedirect, URLMapPathMatcherDefaultUrlRedirectArgs
- Strip
Query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- Host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- Https
Redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- Path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- Prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- Redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- Strip
Query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- Host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- Https
Redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- Path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- Prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- Redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query Boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- host
Redirect String - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect Boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- path
Redirect String - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- prefix
Redirect String - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- redirect
Response StringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip_
query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- host_
redirect str - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https_
redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- path_
redirect str - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- prefix_
redirect str - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- redirect_
response_ strcode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query Boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. The default is set to false. This field is required to ensure an empty block is not set. The normal default value is false.
- host
Redirect String - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect Boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.
- path
Redirect String - The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- prefix
Redirect String - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.
- redirect
Response StringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
URLMapPathMatcherHeaderAction, URLMapPathMatcherHeaderActionArgs
- Request
Headers List<URLMapTo Adds Path Matcher Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers List<string>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers List<URLMapTo Adds Path Matcher Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers List<string>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- Request
Headers []URLMapTo Adds Path Matcher Header Action Request Headers To Add - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers []stringTo Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers []URLMapTo Adds Path Matcher Header Action Response Headers To Add - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers []stringTo Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<URLMapTo Adds Path Matcher Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<URLMapTo Adds Path Matcher Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers URLMapTo Adds Path Matcher Header Action Request Headers To Add[] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers string[]To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers URLMapTo Adds Path Matcher Header Action Response Headers To Add[] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers string[]To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request_
headers_ Sequence[URLMapto_ adds Path Matcher Header Action Request Headers To Add] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response_
headers_ Sequence[URLMapto_ adds Path Matcher Header Action Response Headers To Add] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<Property Map>To Adds - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<Property Map>To Adds - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
URLMapPathMatcherHeaderActionRequestHeadersToAdd, URLMapPathMatcherHeaderActionRequestHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherHeaderActionResponseHeadersToAdd, URLMapPathMatcherHeaderActionResponseHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherPathRule, URLMapPathMatcherPathRuleArgs
- Paths List<string>
- The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
- Custom
Error URLMapResponse Policy Path Matcher Path Rule Custom Error Response Policy - customErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. If a policy for an error code is not configured for the PathRule, a policy for the error code configured in pathMatcher.defaultCustomErrorResponsePolicy is applied. If one is not specified in pathMatcher.defaultCustomErrorResponsePolicy, the policy configured in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy are configured with policies for 5xx and 4xx errors A PathRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in PathRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. customErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- Route
Action URLMapPath Matcher Path Rule Route Action - In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- Service string
- The backend service or backend bucket to use if any of the given paths match.
- Url
Redirect URLMapPath Matcher Path Rule Url Redirect - When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- Paths []string
- The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
- Custom
Error URLMapResponse Policy Path Matcher Path Rule Custom Error Response Policy - customErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. If a policy for an error code is not configured for the PathRule, a policy for the error code configured in pathMatcher.defaultCustomErrorResponsePolicy is applied. If one is not specified in pathMatcher.defaultCustomErrorResponsePolicy, the policy configured in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy are configured with policies for 5xx and 4xx errors A PathRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in PathRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. customErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- Route
Action URLMapPath Matcher Path Rule Route Action - In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- Service string
- The backend service or backend bucket to use if any of the given paths match.
- Url
Redirect URLMapPath Matcher Path Rule Url Redirect - When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- paths List<String>
- The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
- custom
Error URLMapResponse Policy Path Matcher Path Rule Custom Error Response Policy - customErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. If a policy for an error code is not configured for the PathRule, a policy for the error code configured in pathMatcher.defaultCustomErrorResponsePolicy is applied. If one is not specified in pathMatcher.defaultCustomErrorResponsePolicy, the policy configured in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy are configured with policies for 5xx and 4xx errors A PathRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in PathRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. customErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- route
Action URLMapPath Matcher Path Rule Route Action - In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- service String
- The backend service or backend bucket to use if any of the given paths match.
- url
Redirect URLMapPath Matcher Path Rule Url Redirect - When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- paths string[]
- The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
- custom
Error URLMapResponse Policy Path Matcher Path Rule Custom Error Response Policy - customErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. If a policy for an error code is not configured for the PathRule, a policy for the error code configured in pathMatcher.defaultCustomErrorResponsePolicy is applied. If one is not specified in pathMatcher.defaultCustomErrorResponsePolicy, the policy configured in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy are configured with policies for 5xx and 4xx errors A PathRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in PathRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. customErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- route
Action URLMapPath Matcher Path Rule Route Action - In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- service string
- The backend service or backend bucket to use if any of the given paths match.
- url
Redirect URLMapPath Matcher Path Rule Url Redirect - When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- paths Sequence[str]
- The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
- custom_
error_ URLMapresponse_ policy Path Matcher Path Rule Custom Error Response Policy - customErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. If a policy for an error code is not configured for the PathRule, a policy for the error code configured in pathMatcher.defaultCustomErrorResponsePolicy is applied. If one is not specified in pathMatcher.defaultCustomErrorResponsePolicy, the policy configured in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy are configured with policies for 5xx and 4xx errors A PathRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in PathRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. customErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- route_
action URLMapPath Matcher Path Rule Route Action - In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- service str
- The backend service or backend bucket to use if any of the given paths match.
- url_
redirect URLMapPath Matcher Path Rule Url Redirect - When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- paths List<String>
- The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
- custom
Error Property MapResponse Policy - customErrorResponsePolicy specifies how the Load Balancer returns error responses when BackendServiceor BackendBucket responds with an error. If a policy for an error code is not configured for the PathRule, a policy for the error code configured in pathMatcher.defaultCustomErrorResponsePolicy is applied. If one is not specified in pathMatcher.defaultCustomErrorResponsePolicy, the policy configured in UrlMap.defaultCustomErrorResponsePolicy takes effect. For example, consider a UrlMap with the following configuration: UrlMap.defaultCustomErrorResponsePolicy are configured with policies for 5xx and 4xx errors A PathRule for /coming_soon/ is configured for the error code 404. If the request is for www.myotherdomain.com and a 404 is encountered, the policy under UrlMap.defaultCustomErrorResponsePolicy takes effect. If a 404 response is encountered for the request www.example.com/current_events/, the pathMatcher's policy takes effect. If however, the request for www.example.com/coming_soon/ encounters a 404, the policy in PathRule.customErrorResponsePolicy takes effect. If any of the requests in this example encounter a 500 error code, the policy at UrlMap.defaultCustomErrorResponsePolicy takes effect. customErrorResponsePolicy is supported only for global external Application Load Balancers. Structure is documented below.
- route
Action Property Map - In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- service String
- The backend service or backend bucket to use if any of the given paths match.
- url
Redirect Property Map - When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
URLMapPathMatcherPathRuleCustomErrorResponsePolicy, URLMapPathMatcherPathRuleCustomErrorResponsePolicyArgs
- Error
Response List<URLMapRules Path Matcher Path Rule Custom Error Response Policy Error Response Rule> - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- Error
Service string - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- Error
Response []URLMapRules Path Matcher Path Rule Custom Error Response Policy Error Response Rule - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- Error
Service string - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error
Response List<URLMapRules Path Matcher Path Rule Custom Error Response Policy Error Response Rule> - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error
Service String - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error
Response URLMapRules Path Matcher Path Rule Custom Error Response Policy Error Response Rule[] - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error
Service string - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error_
response_ Sequence[URLMaprules Path Matcher Path Rule Custom Error Response Policy Error Response Rule] - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error_
service str - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
- error
Response List<Property Map>Rules - Specifies rules for returning error responses. In a given policy, if you specify rules for both a range of error codes as well as rules for specific error codes then rules with specific error codes have a higher priority. For example, assume that you configure a rule for 401 (Un-authorized) code, and another for all 4 series error codes (4XX). If the backend service returns a 401, then the rule for 401 will be applied. However if the backend service returns a 403, the rule for 4xx takes effect. Structure is documented below.
- error
Service String - The full or partial URL to the BackendBucket resource that contains the custom error content. Examples are: https://www.googleapis.com/compute/v1/projects/project/global/backendBuckets/myBackendBucket compute/v1/projects/project/global/backendBuckets/myBackendBucket global/backendBuckets/myBackendBucket If errorService is not specified at lower levels like pathMatcher, pathRule and routeRule, an errorService specified at a higher level in the UrlMap will be used. If UrlMap.defaultCustomErrorResponsePolicy contains one or more errorResponseRules[], it must specify errorService. If load balancer cannot reach the backendBucket, a simple Not Found Error will be returned, with the original response code (or overrideResponseCode if configured).
URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRule, URLMapPathMatcherPathRuleCustomErrorResponsePolicyErrorResponseRuleArgs
- Match
Response List<string>Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- Override
Response intCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- Path string
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- Match
Response []stringCodes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- Override
Response intCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- Path string
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match
Response List<String>Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override
Response IntegerCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path String
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match
Response string[]Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override
Response numberCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path string
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match_
response_ Sequence[str]codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override_
response_ intcode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path str
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
- match
Response List<String>Codes - Valid values include:
- A number between 400 and 599: For example 401 or 503, in which case the load balancer applies the policy if the error code exactly matches this value.
- 5xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 500 to 599.
- 4xx: Load Balancer will apply the policy if the backend service responds with any response code in the range of 400 to 499. Values must be unique within matchResponseCodes and across all errorResponseRules of CustomErrorResponsePolicy.
- override
Response NumberCode - The HTTP status code returned with the response containing the custom error content. If overrideResponseCode is not supplied, the same response code returned by the original backend bucket or backend service is returned to the client.
- path String
- The full path to a file within backendBucket. For example: /errors/defaultError.html path must start with a leading slash. path cannot have trailing slashes. If the file is not available in backendBucket or the load balancer cannot reach the BackendBucket, a simple Not Found Error is returned to the client. The value must be from 1 to 1024 characters.
URLMapPathMatcherPathRuleRouteAction, URLMapPathMatcherPathRuleRouteActionArgs
- Cors
Policy URLMapPath Matcher Path Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- Fault
Injection URLMapPolicy Path Matcher Path Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- Request
Mirror URLMapPolicy Path Matcher Path Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- Retry
Policy URLMapPath Matcher Path Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- Timeout
URLMap
Path Matcher Path Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- Url
Rewrite URLMapPath Matcher Path Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- Weighted
Backend List<URLMapServices Path Matcher Path Rule Route Action Weighted Backend Service> - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- Cors
Policy URLMapPath Matcher Path Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- Fault
Injection URLMapPolicy Path Matcher Path Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- Request
Mirror URLMapPolicy Path Matcher Path Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- Retry
Policy URLMapPath Matcher Path Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- Timeout
URLMap
Path Matcher Path Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- Url
Rewrite URLMapPath Matcher Path Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- Weighted
Backend []URLMapServices Path Matcher Path Rule Route Action Weighted Backend Service - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy URLMapPath Matcher Path Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection URLMapPolicy Path Matcher Path Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- request
Mirror URLMapPolicy Path Matcher Path Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy URLMapPath Matcher Path Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Path Matcher Path Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- url
Rewrite URLMapPath Matcher Path Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- weighted
Backend List<URLMapServices Path Matcher Path Rule Route Action Weighted Backend Service> - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy URLMapPath Matcher Path Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection URLMapPolicy Path Matcher Path Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- request
Mirror URLMapPolicy Path Matcher Path Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy URLMapPath Matcher Path Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Path Matcher Path Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- url
Rewrite URLMapPath Matcher Path Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- weighted
Backend URLMapServices Path Matcher Path Rule Route Action Weighted Backend Service[] - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors_
policy URLMapPath Matcher Path Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault_
injection_ URLMappolicy Path Matcher Path Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- request_
mirror_ URLMappolicy Path Matcher Path Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry_
policy URLMapPath Matcher Path Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Path Matcher Path Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- url_
rewrite URLMapPath Matcher Path Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- weighted_
backend_ Sequence[URLMapservices Path Matcher Path Rule Route Action Weighted Backend Service] - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy Property Map - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection Property MapPolicy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- request
Mirror Property MapPolicy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy Property Map - Specifies the retry policy associated with this route. Structure is documented below.
- timeout Property Map
- Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- url
Rewrite Property Map - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- weighted
Backend List<Property Map>Services - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
URLMapPathMatcherPathRuleRouteActionCorsPolicy, URLMapPathMatcherPathRuleRouteActionCorsPolicyArgs
- Disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- Allow
Credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- Allow
Headers List<string> - Specifies the content for the Access-Control-Allow-Headers header.
- Allow
Methods List<string> - Specifies the content for the Access-Control-Allow-Methods header.
- Allow
Origin List<string>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Allow
Origins List<string> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Expose
Headers List<string> - Specifies the content for the Access-Control-Expose-Headers header.
- Max
Age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- Disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- Allow
Credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- Allow
Headers []string - Specifies the content for the Access-Control-Allow-Headers header.
- Allow
Methods []string - Specifies the content for the Access-Control-Allow-Methods header.
- Allow
Origin []stringRegexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Allow
Origins []string - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Expose
Headers []string - Specifies the content for the Access-Control-Expose-Headers header.
- Max
Age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- disabled Boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- allow
Credentials Boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers List<String> - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods List<String> - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin List<String>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins List<String> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- expose
Headers List<String> - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age Integer - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- disabled boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- allow
Credentials boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers string[] - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods string[] - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin string[]Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins string[] - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- expose
Headers string[] - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age number - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- allow_
credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow_
headers Sequence[str] - Specifies the content for the Access-Control-Allow-Headers header.
- allow_
methods Sequence[str] - Specifies the content for the Access-Control-Allow-Methods header.
- allow_
origin_ Sequence[str]regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow_
origins Sequence[str] - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- expose_
headers Sequence[str] - Specifies the content for the Access-Control-Expose-Headers header.
- max_
age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- disabled Boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- allow
Credentials Boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers List<String> - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods List<String> - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin List<String>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins List<String> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- expose
Headers List<String> - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age Number - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicy, URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyArgs
- Abort
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- Delay
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- Abort
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- Delay
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Path Matcher Path Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort Property Map
- The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay Property Map
- The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbort, URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbortArgs
- Http
Status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- Percentage double
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- Http
Status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- Percentage float64
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status Integer - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage Double
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status number - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage number
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http_
status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage float
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status Number - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage Number
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelay, URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayArgs
- Fixed
Delay URLMapPath Matcher Path Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- Percentage double
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- Fixed
Delay URLMapPath Matcher Path Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- Percentage float64
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay URLMapPath Matcher Path Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage Double
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay URLMapPath Matcher Path Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage number
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed_
delay URLMapPath Matcher Path Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage float
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay Property Map - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage Number
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelay, URLMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
URLMapPathMatcherPathRuleRouteActionRequestMirrorPolicy, URLMapPathMatcherPathRuleRouteActionRequestMirrorPolicyArgs
- Backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- Backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service String - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- backend_
service str - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service String - The full or partial URL to the BackendService resource being mirrored to.
URLMapPathMatcherPathRuleRouteActionRetryPolicy, URLMapPathMatcherPathRuleRouteActionRetryPolicyArgs
- Num
Retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- Per
Try URLMapTimeout Path Matcher Path Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Retry
Conditions List<string> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- Num
Retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- Per
Try URLMapTimeout Path Matcher Path Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Retry
Conditions []string - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries Integer - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try URLMapTimeout Path Matcher Path Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions List<String> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries number - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try URLMapTimeout Path Matcher Path Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions string[] - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num_
retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per_
try_ URLMaptimeout Path Matcher Path Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry_
conditions Sequence[str] - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries Number - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try Property MapTimeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions List<String> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
URLMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeout, URLMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeoutArgs
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
URLMapPathMatcherPathRuleRouteActionTimeout, URLMapPathMatcherPathRuleRouteActionTimeoutArgs
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
URLMapPathMatcherPathRuleRouteActionUrlRewrite, URLMapPathMatcherPathRuleRouteActionUrlRewriteArgs
- Host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- Path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- Host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- Path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host
Rewrite String - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix StringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host_
rewrite str - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path_
prefix_ strrewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- host
Rewrite String - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix StringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
URLMapPathMatcherPathRuleRouteActionWeightedBackendService, URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs
- Backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- Weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- Header
Action URLMapPath Matcher Path Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- Backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- Weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- Header
Action URLMapPath Matcher Path Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- backend
Service String - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- weight Integer
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- header
Action URLMapPath Matcher Path Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- weight number
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- header
Action URLMapPath Matcher Path Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- backend_
service str - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- header_
action URLMapPath Matcher Path Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- backend
Service String - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- weight Number
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- header
Action Property Map - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderAction, URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs
- Request
Headers List<URLMapTo Adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers List<string>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers List<URLMapTo Adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers List<string>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- Request
Headers []URLMapTo Adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Request Headers To Add - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers []stringTo Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers []URLMapTo Adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Response Headers To Add - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers []stringTo Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<URLMapTo Adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<URLMapTo Adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers URLMapTo Adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Request Headers To Add[] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers string[]To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers URLMapTo Adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Response Headers To Add[] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers string[]To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request_
headers_ Sequence[URLMapto_ adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Request Headers To Add] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response_
headers_ Sequence[URLMapto_ adds Path Matcher Path Rule Route Action Weighted Backend Service Header Action Response Headers To Add] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<Property Map>To Adds - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<Property Map>To Adds - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd, URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd, URLMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherPathRuleUrlRedirect, URLMapPathMatcherPathRuleUrlRedirectArgs
- Strip
Query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- Host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- Https
Redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- Path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- Prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- Redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- Strip
Query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- Host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- Https
Redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- Path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- Prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- Redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query Boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- host
Redirect String - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect Boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- path
Redirect String - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- prefix
Redirect String - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- redirect
Response StringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip_
query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- host_
redirect str - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https_
redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- path_
redirect str - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- prefix_
redirect str - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- redirect_
response_ strcode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query Boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- host
Redirect String - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect Boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- path
Redirect String - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- prefix
Redirect String - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- redirect
Response StringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
URLMapPathMatcherRouteRule, URLMapPathMatcherRouteRuleArgs
- Priority int
- For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
- Header
Action URLMapPath Matcher Route Rule Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
- Match
Rules List<URLMapPath Matcher Route Rule Match Rule> - The rules for determining a match. Structure is documented below.
- Route
Action URLMapPath Matcher Route Rule Route Action - In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- Service string
- The backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
- Url
Redirect URLMapPath Matcher Route Rule Url Redirect - When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- Priority int
- For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
- Header
Action URLMapPath Matcher Route Rule Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
- Match
Rules []URLMapPath Matcher Route Rule Match Rule - The rules for determining a match. Structure is documented below.
- Route
Action URLMapPath Matcher Route Rule Route Action - In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- Service string
- The backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
- Url
Redirect URLMapPath Matcher Route Rule Url Redirect - When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- priority Integer
- For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
- header
Action URLMapPath Matcher Route Rule Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
- match
Rules List<URLMapPath Matcher Route Rule Match Rule> - The rules for determining a match. Structure is documented below.
- route
Action URLMapPath Matcher Route Rule Route Action - In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- service String
- The backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
- url
Redirect URLMapPath Matcher Route Rule Url Redirect - When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- priority number
- For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
- header
Action URLMapPath Matcher Route Rule Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
- match
Rules URLMapPath Matcher Route Rule Match Rule[] - The rules for determining a match. Structure is documented below.
- route
Action URLMapPath Matcher Route Rule Route Action - In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- service string
- The backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
- url
Redirect URLMapPath Matcher Route Rule Url Redirect - When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- priority int
- For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
- header_
action URLMapPath Matcher Route Rule Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
- match_
rules Sequence[URLMapPath Matcher Route Rule Match Rule] - The rules for determining a match. Structure is documented below.
- route_
action URLMapPath Matcher Route Rule Route Action - In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- service str
- The backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
- url_
redirect URLMapPath Matcher Route Rule Url Redirect - When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
- priority Number
- For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
- header
Action Property Map - Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
- match
Rules List<Property Map> - The rules for determining a match. Structure is documented below.
- route
Action Property Map - In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
- service String
- The backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
- url
Redirect Property Map - When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.
URLMapPathMatcherRouteRuleHeaderAction, URLMapPathMatcherRouteRuleHeaderActionArgs
- Request
Headers List<URLMapTo Adds Path Matcher Route Rule Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers List<string>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers List<URLMapTo Adds Path Matcher Route Rule Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers List<string>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- Request
Headers []URLMapTo Adds Path Matcher Route Rule Header Action Request Headers To Add - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers []stringTo Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers []URLMapTo Adds Path Matcher Route Rule Header Action Response Headers To Add - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers []stringTo Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<URLMapTo Adds Path Matcher Route Rule Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<URLMapTo Adds Path Matcher Route Rule Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers URLMapTo Adds Path Matcher Route Rule Header Action Request Headers To Add[] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers string[]To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers URLMapTo Adds Path Matcher Route Rule Header Action Response Headers To Add[] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers string[]To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request_
headers_ Sequence[URLMapto_ adds Path Matcher Route Rule Header Action Request Headers To Add] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response_
headers_ Sequence[URLMapto_ adds Path Matcher Route Rule Header Action Response Headers To Add] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<Property Map>To Adds - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<Property Map>To Adds - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAdd, URLMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAdd, URLMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherRouteRuleMatchRule, URLMapPathMatcherRouteRuleMatchRuleArgs
- Full
Path stringMatch - For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- Header
Matches List<URLMapPath Matcher Route Rule Match Rule Header Match> - Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
- Ignore
Case bool - Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
- Metadata
Filters List<URLMapPath Matcher Route Rule Match Rule Metadata Filter> - Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
- Path
Template stringMatch - For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
- Prefix
Match string - For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- Query
Parameter List<URLMapMatches Path Matcher Route Rule Match Rule Query Parameter Match> - Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
- Regex
Match string - For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- Full
Path stringMatch - For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- Header
Matches []URLMapPath Matcher Route Rule Match Rule Header Match - Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
- Ignore
Case bool - Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
- Metadata
Filters []URLMapPath Matcher Route Rule Match Rule Metadata Filter - Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
- Path
Template stringMatch - For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
- Prefix
Match string - For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- Query
Parameter []URLMapMatches Path Matcher Route Rule Match Rule Query Parameter Match - Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
- Regex
Match string - For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- full
Path StringMatch - For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- header
Matches List<URLMapPath Matcher Route Rule Match Rule Header Match> - Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
- ignore
Case Boolean - Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
- metadata
Filters List<URLMapPath Matcher Route Rule Match Rule Metadata Filter> - Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
- path
Template StringMatch - For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
- prefix
Match String - For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- query
Parameter List<URLMapMatches Path Matcher Route Rule Match Rule Query Parameter Match> - Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
- regex
Match String - For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- full
Path stringMatch - For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- header
Matches URLMapPath Matcher Route Rule Match Rule Header Match[] - Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
- ignore
Case boolean - Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
- metadata
Filters URLMapPath Matcher Route Rule Match Rule Metadata Filter[] - Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
- path
Template stringMatch - For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
- prefix
Match string - For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- query
Parameter URLMapMatches Path Matcher Route Rule Match Rule Query Parameter Match[] - Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
- regex
Match string - For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- full_
path_ strmatch - For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- header_
matches Sequence[URLMapPath Matcher Route Rule Match Rule Header Match] - Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
- ignore_
case bool - Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
- metadata_
filters Sequence[URLMapPath Matcher Route Rule Match Rule Metadata Filter] - Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
- path_
template_ strmatch - For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
- prefix_
match str - For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- query_
parameter_ Sequence[URLMapmatches Path Matcher Route Rule Match Rule Query Parameter Match] - Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
- regex_
match str - For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- full
Path StringMatch - For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- header
Matches List<Property Map> - Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
- ignore
Case Boolean - Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
- metadata
Filters List<Property Map> - Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
- path
Template StringMatch - For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
- prefix
Match String - For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
- query
Parameter List<Property Map>Matches - Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
- regex
Match String - For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
URLMapPathMatcherRouteRuleMatchRuleHeaderMatch, URLMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs
- Header
Name string - The name of the HTTP header to match. For matching against the HTTP request's authority, use a headerMatch with the header name ":authority". For matching a request's method, use the headerName ":method".
- Exact
Match string - The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- Invert
Match bool - If set to false, the headerMatch is considered a match if the match criteria above are met. If set to true, the headerMatch is considered a match if the match criteria above are NOT met. Defaults to false.
- Prefix
Match string - The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- Present
Match bool - A header with the contents of headerName must exist. The match takes place whether or not the request's header has a value or not. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- Range
Match URLMapPath Matcher Route Rule Match Rule Header Match Range Match - The header value must be an integer and its value must be in the range specified in rangeMatch. If the header does not contain an integer, number or is empty, the match fails. For example for a range [-5, 0] - -3 will match. - 0 will not match. - 0.25 will not match. - -3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.
- Regex
Match string - The value of the header must match the regular expression specified in regexMatch. For regular expression grammar, please see: en.cppreference.com/w/cpp/regex/ecmascript For matching against a port specified in the HTTP request, use a headerMatch with headerName set to PORT and a regular expression that satisfies the RFC2616 Host header's port specifier. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- Suffix
Match string - The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- Header
Name string - The name of the HTTP header to match. For matching against the HTTP request's authority, use a headerMatch with the header name ":authority". For matching a request's method, use the headerName ":method".
- Exact
Match string - The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- Invert
Match bool - If set to false, the headerMatch is considered a match if the match criteria above are met. If set to true, the headerMatch is considered a match if the match criteria above are NOT met. Defaults to false.
- Prefix
Match string - The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- Present
Match bool - A header with the contents of headerName must exist. The match takes place whether or not the request's header has a value or not. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- Range
Match URLMapPath Matcher Route Rule Match Rule Header Match Range Match - The header value must be an integer and its value must be in the range specified in rangeMatch. If the header does not contain an integer, number or is empty, the match fails. For example for a range [-5, 0] - -3 will match. - 0 will not match. - 0.25 will not match. - -3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.
- Regex
Match string - The value of the header must match the regular expression specified in regexMatch. For regular expression grammar, please see: en.cppreference.com/w/cpp/regex/ecmascript For matching against a port specified in the HTTP request, use a headerMatch with headerName set to PORT and a regular expression that satisfies the RFC2616 Host header's port specifier. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- Suffix
Match string - The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- header
Name String - The name of the HTTP header to match. For matching against the HTTP request's authority, use a headerMatch with the header name ":authority". For matching a request's method, use the headerName ":method".
- exact
Match String - The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- invert
Match Boolean - If set to false, the headerMatch is considered a match if the match criteria above are met. If set to true, the headerMatch is considered a match if the match criteria above are NOT met. Defaults to false.
- prefix
Match String - The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- present
Match Boolean - A header with the contents of headerName must exist. The match takes place whether or not the request's header has a value or not. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- range
Match URLMapPath Matcher Route Rule Match Rule Header Match Range Match - The header value must be an integer and its value must be in the range specified in rangeMatch. If the header does not contain an integer, number or is empty, the match fails. For example for a range [-5, 0] - -3 will match. - 0 will not match. - 0.25 will not match. - -3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.
- regex
Match String - The value of the header must match the regular expression specified in regexMatch. For regular expression grammar, please see: en.cppreference.com/w/cpp/regex/ecmascript For matching against a port specified in the HTTP request, use a headerMatch with headerName set to PORT and a regular expression that satisfies the RFC2616 Host header's port specifier. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- suffix
Match String - The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- header
Name string - The name of the HTTP header to match. For matching against the HTTP request's authority, use a headerMatch with the header name ":authority". For matching a request's method, use the headerName ":method".
- exact
Match string - The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- invert
Match boolean - If set to false, the headerMatch is considered a match if the match criteria above are met. If set to true, the headerMatch is considered a match if the match criteria above are NOT met. Defaults to false.
- prefix
Match string - The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- present
Match boolean - A header with the contents of headerName must exist. The match takes place whether or not the request's header has a value or not. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- range
Match URLMapPath Matcher Route Rule Match Rule Header Match Range Match - The header value must be an integer and its value must be in the range specified in rangeMatch. If the header does not contain an integer, number or is empty, the match fails. For example for a range [-5, 0] - -3 will match. - 0 will not match. - 0.25 will not match. - -3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.
- regex
Match string - The value of the header must match the regular expression specified in regexMatch. For regular expression grammar, please see: en.cppreference.com/w/cpp/regex/ecmascript For matching against a port specified in the HTTP request, use a headerMatch with headerName set to PORT and a regular expression that satisfies the RFC2616 Host header's port specifier. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- suffix
Match string - The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- header_
name str - The name of the HTTP header to match. For matching against the HTTP request's authority, use a headerMatch with the header name ":authority". For matching a request's method, use the headerName ":method".
- exact_
match str - The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- invert_
match bool - If set to false, the headerMatch is considered a match if the match criteria above are met. If set to true, the headerMatch is considered a match if the match criteria above are NOT met. Defaults to false.
- prefix_
match str - The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- present_
match bool - A header with the contents of headerName must exist. The match takes place whether or not the request's header has a value or not. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- range_
match URLMapPath Matcher Route Rule Match Rule Header Match Range Match - The header value must be an integer and its value must be in the range specified in rangeMatch. If the header does not contain an integer, number or is empty, the match fails. For example for a range [-5, 0] - -3 will match. - 0 will not match. - 0.25 will not match. - -3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.
- regex_
match str - The value of the header must match the regular expression specified in regexMatch. For regular expression grammar, please see: en.cppreference.com/w/cpp/regex/ecmascript For matching against a port specified in the HTTP request, use a headerMatch with headerName set to PORT and a regular expression that satisfies the RFC2616 Host header's port specifier. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- suffix_
match str - The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- header
Name String - The name of the HTTP header to match. For matching against the HTTP request's authority, use a headerMatch with the header name ":authority". For matching a request's method, use the headerName ":method".
- exact
Match String - The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- invert
Match Boolean - If set to false, the headerMatch is considered a match if the match criteria above are met. If set to true, the headerMatch is considered a match if the match criteria above are NOT met. Defaults to false.
- prefix
Match String - The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- present
Match Boolean - A header with the contents of headerName must exist. The match takes place whether or not the request's header has a value or not. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- range
Match Property Map - The header value must be an integer and its value must be in the range specified in rangeMatch. If the header does not contain an integer, number or is empty, the match fails. For example for a range [-5, 0] - -3 will match. - 0 will not match. - 0.25 will not match. - -3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.
- regex
Match String - The value of the header must match the regular expression specified in regexMatch. For regular expression grammar, please see: en.cppreference.com/w/cpp/regex/ecmascript For matching against a port specified in the HTTP request, use a headerMatch with headerName set to PORT and a regular expression that satisfies the RFC2616 Host header's port specifier. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
- suffix
Match String - The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.
URLMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatch, URLMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatchArgs
- Range
End int - The end of the range (exclusive).
- Range
Start int - The start of the range (inclusive).
- Range
End int - The end of the range (exclusive).
- Range
Start int - The start of the range (inclusive).
- range
End Integer - The end of the range (exclusive).
- range
Start Integer - The start of the range (inclusive).
- range
End number - The end of the range (exclusive).
- range
Start number - The start of the range (inclusive).
- range_
end int - The end of the range (exclusive).
- range_
start int - The start of the range (inclusive).
- range
End Number - The end of the range (exclusive).
- range
Start Number - The start of the range (inclusive).
URLMapPathMatcherRouteRuleMatchRuleMetadataFilter, URLMapPathMatcherRouteRuleMatchRuleMetadataFilterArgs
- Filter
Labels List<URLMapPath Matcher Route Rule Match Rule Metadata Filter Filter Label> - The list of label value pairs that must match labels in the provided metadata based on filterMatchCriteria This list must not be empty and can have at the most 64 entries. Structure is documented below.
- Filter
Match stringCriteria - Specifies how individual filterLabel matches within the list of filterLabels
contribute towards the overall metadataFilter match. Supported values are:
- MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
- MATCH_ALL: All filterLabels must have matching labels in
the provided metadata.
Possible values are:
MATCH_ALL,MATCH_ANY.
- Filter
Labels []URLMapPath Matcher Route Rule Match Rule Metadata Filter Filter Label - The list of label value pairs that must match labels in the provided metadata based on filterMatchCriteria This list must not be empty and can have at the most 64 entries. Structure is documented below.
- Filter
Match stringCriteria - Specifies how individual filterLabel matches within the list of filterLabels
contribute towards the overall metadataFilter match. Supported values are:
- MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
- MATCH_ALL: All filterLabels must have matching labels in
the provided metadata.
Possible values are:
MATCH_ALL,MATCH_ANY.
- filter
Labels List<URLMapPath Matcher Route Rule Match Rule Metadata Filter Filter Label> - The list of label value pairs that must match labels in the provided metadata based on filterMatchCriteria This list must not be empty and can have at the most 64 entries. Structure is documented below.
- filter
Match StringCriteria - Specifies how individual filterLabel matches within the list of filterLabels
contribute towards the overall metadataFilter match. Supported values are:
- MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
- MATCH_ALL: All filterLabels must have matching labels in
the provided metadata.
Possible values are:
MATCH_ALL,MATCH_ANY.
- filter
Labels URLMapPath Matcher Route Rule Match Rule Metadata Filter Filter Label[] - The list of label value pairs that must match labels in the provided metadata based on filterMatchCriteria This list must not be empty and can have at the most 64 entries. Structure is documented below.
- filter
Match stringCriteria - Specifies how individual filterLabel matches within the list of filterLabels
contribute towards the overall metadataFilter match. Supported values are:
- MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
- MATCH_ALL: All filterLabels must have matching labels in
the provided metadata.
Possible values are:
MATCH_ALL,MATCH_ANY.
- filter_
labels Sequence[URLMapPath Matcher Route Rule Match Rule Metadata Filter Filter Label] - The list of label value pairs that must match labels in the provided metadata based on filterMatchCriteria This list must not be empty and can have at the most 64 entries. Structure is documented below.
- filter_
match_ strcriteria - Specifies how individual filterLabel matches within the list of filterLabels
contribute towards the overall metadataFilter match. Supported values are:
- MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
- MATCH_ALL: All filterLabels must have matching labels in
the provided metadata.
Possible values are:
MATCH_ALL,MATCH_ANY.
- filter
Labels List<Property Map> - The list of label value pairs that must match labels in the provided metadata based on filterMatchCriteria This list must not be empty and can have at the most 64 entries. Structure is documented below.
- filter
Match StringCriteria - Specifies how individual filterLabel matches within the list of filterLabels
contribute towards the overall metadataFilter match. Supported values are:
- MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
- MATCH_ALL: All filterLabels must have matching labels in
the provided metadata.
Possible values are:
MATCH_ALL,MATCH_ANY.
URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabel, URLMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArgs
URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatch, URLMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs
- Name string
- The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
- Exact
Match string - The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
- Present
Match bool - Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
- Regex
Match string - The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.
- Name string
- The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
- Exact
Match string - The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
- Present
Match bool - Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
- Regex
Match string - The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.
- name String
- The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
- exact
Match String - The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
- present
Match Boolean - Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
- regex
Match String - The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.
- name string
- The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
- exact
Match string - The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
- present
Match boolean - Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
- regex
Match string - The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.
- name str
- The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
- exact_
match str - The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
- present_
match bool - Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
- regex_
match str - The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.
- name String
- The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
- exact
Match String - The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
- present
Match Boolean - Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
- regex
Match String - The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.
URLMapPathMatcherRouteRuleRouteAction, URLMapPathMatcherRouteRuleRouteActionArgs
- Cors
Policy URLMapPath Matcher Route Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- Fault
Injection URLMapPolicy Path Matcher Route Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- Request
Mirror URLMapPolicy Path Matcher Route Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- Retry
Policy URLMapPath Matcher Route Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- Timeout
URLMap
Path Matcher Route Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- Url
Rewrite URLMapPath Matcher Route Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- Weighted
Backend List<URLMapServices Path Matcher Route Rule Route Action Weighted Backend Service> - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- Cors
Policy URLMapPath Matcher Route Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- Fault
Injection URLMapPolicy Path Matcher Route Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- Request
Mirror URLMapPolicy Path Matcher Route Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- Retry
Policy URLMapPath Matcher Route Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- Timeout
URLMap
Path Matcher Route Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- Url
Rewrite URLMapPath Matcher Route Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- Weighted
Backend []URLMapServices Path Matcher Route Rule Route Action Weighted Backend Service - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy URLMapPath Matcher Route Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection URLMapPolicy Path Matcher Route Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- request
Mirror URLMapPolicy Path Matcher Route Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy URLMapPath Matcher Route Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Path Matcher Route Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- url
Rewrite URLMapPath Matcher Route Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- weighted
Backend List<URLMapServices Path Matcher Route Rule Route Action Weighted Backend Service> - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy URLMapPath Matcher Route Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection URLMapPolicy Path Matcher Route Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- request
Mirror URLMapPolicy Path Matcher Route Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy URLMapPath Matcher Route Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Path Matcher Route Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- url
Rewrite URLMapPath Matcher Route Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- weighted
Backend URLMapServices Path Matcher Route Rule Route Action Weighted Backend Service[] - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors_
policy URLMapPath Matcher Route Rule Route Action Cors Policy - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault_
injection_ URLMappolicy Path Matcher Route Rule Route Action Fault Injection Policy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- request_
mirror_ URLMappolicy Path Matcher Route Rule Route Action Request Mirror Policy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry_
policy URLMapPath Matcher Route Rule Route Action Retry Policy - Specifies the retry policy associated with this route. Structure is documented below.
- timeout
URLMap
Path Matcher Route Rule Route Action Timeout - Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- url_
rewrite URLMapPath Matcher Route Rule Route Action Url Rewrite - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- weighted_
backend_ Sequence[URLMapservices Path Matcher Route Rule Route Action Weighted Backend Service] - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
- cors
Policy Property Map - The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
- fault
Injection Property MapPolicy - The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
- request
Mirror Property MapPolicy - Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
- retry
Policy Property Map - Specifies the retry policy associated with this route. Structure is documented below.
- timeout Property Map
- Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
- url
Rewrite Property Map - The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
- weighted
Backend List<Property Map>Services - A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.
URLMapPathMatcherRouteRuleRouteActionCorsPolicy, URLMapPathMatcherRouteRuleRouteActionCorsPolicyArgs
- Allow
Credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- Allow
Headers List<string> - Specifies the content for the Access-Control-Allow-Headers header.
- Allow
Methods List<string> - Specifies the content for the Access-Control-Allow-Methods header.
- Allow
Origin List<string>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Allow
Origins List<string> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- Expose
Headers List<string> - Specifies the content for the Access-Control-Expose-Headers header.
- Max
Age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- Allow
Credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- Allow
Headers []string - Specifies the content for the Access-Control-Allow-Headers header.
- Allow
Methods []string - Specifies the content for the Access-Control-Allow-Methods header.
- Allow
Origin []stringRegexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Allow
Origins []string - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- Disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- Expose
Headers []string - Specifies the content for the Access-Control-Expose-Headers header.
- Max
Age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow
Credentials Boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers List<String> - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods List<String> - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin List<String>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins List<String> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled Boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose
Headers List<String> - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age Integer - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow
Credentials boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers string[] - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods string[] - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin string[]Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins string[] - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose
Headers string[] - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age number - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow_
credentials bool - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow_
headers Sequence[str] - Specifies the content for the Access-Control-Allow-Headers header.
- allow_
methods Sequence[str] - Specifies the content for the Access-Control-Allow-Methods header.
- allow_
origin_ Sequence[str]regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow_
origins Sequence[str] - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled bool
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose_
headers Sequence[str] - Specifies the content for the Access-Control-Expose-Headers header.
- max_
age int - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
- allow
Credentials Boolean - In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This translates to the Access-Control-Allow-Credentials header.
- allow
Headers List<String> - Specifies the content for the Access-Control-Allow-Headers header.
- allow
Methods List<String> - Specifies the content for the Access-Control-Allow-Methods header.
- allow
Origin List<String>Regexes - Specifies the regular expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- allow
Origins List<String> - Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
- disabled Boolean
- If true, specifies the CORS policy is disabled. The default value is false, which indicates that the CORS policy is in effect.
- expose
Headers List<String> - Specifies the content for the Access-Control-Expose-Headers header.
- max
Age Number - Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.
URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicy, URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyArgs
- Abort
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- Delay
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- Abort
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- Delay
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Abort - The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay
URLMap
Path Matcher Route Rule Route Action Fault Injection Policy Delay - The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
- abort Property Map
- The specification for how client requests are aborted as part of fault injection. Structure is documented below.
- delay Property Map
- The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.
URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbort, URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbortArgs
- Http
Status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- Percentage double
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- Http
Status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- Percentage float64
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status Integer - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage Double
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status number - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage number
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http_
status int - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage float
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- http
Status Number - The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
- percentage Number
- The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelay, URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayArgs
- Fixed
Delay URLMapPath Matcher Route Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- Percentage double
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- Fixed
Delay URLMapPath Matcher Route Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- Percentage float64
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay URLMapPath Matcher Route Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage Double
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay URLMapPath Matcher Route Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage number
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed_
delay URLMapPath Matcher Route Rule Route Action Fault Injection Policy Delay Fixed Delay - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage float
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
- fixed
Delay Property Map - Specifies the value of the fixed delay interval. Structure is documented below.
- percentage Number
- The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.
URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelay, URLMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
URLMapPathMatcherRouteRuleRouteActionRequestMirrorPolicy, URLMapPathMatcherRouteRuleRouteActionRequestMirrorPolicyArgs
- Backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- Backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service String - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service string - The full or partial URL to the BackendService resource being mirrored to.
- backend_
service str - The full or partial URL to the BackendService resource being mirrored to.
- backend
Service String - The full or partial URL to the BackendService resource being mirrored to.
URLMapPathMatcherRouteRuleRouteActionRetryPolicy, URLMapPathMatcherRouteRuleRouteActionRetryPolicyArgs
- Num
Retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- Per
Try URLMapTimeout Path Matcher Route Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Retry
Conditions List<string> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- Num
Retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- Per
Try URLMapTimeout Path Matcher Route Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- Retry
Conditions []string - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries Integer - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try URLMapTimeout Path Matcher Route Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions List<String> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries number - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try URLMapTimeout Path Matcher Route Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions string[] - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num_
retries int - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per_
try_ URLMaptimeout Path Matcher Route Rule Route Action Retry Policy Per Try Timeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry_
conditions Sequence[str] - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
- num
Retries Number - Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.
- per
Try Property MapTimeout - Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.
- retry
Conditions List<String> - Specfies one or more conditions when this retry rule applies. Valid values are:
- 5xx: Loadbalancer will attempt a retry if the backend service responds with any 5xx response code, or if the backend service does not respond at all, example: disconnects, reset, read timeout,
- connection failure, and refused streams.
- gateway-error: Similar to 5xx, but only applies to response codes 502, 503 or 504.
- connect-failure: Loadbalancer will retry on failures connecting to backend services, for example due to connection timeouts.
- retriable-4xx: Loadbalancer will retry for retriable 4xx response codes. Currently the only retriable error supported is 409.
- refused-stream:Loadbalancer will retry if the backend service resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
- cancelled: Loadbalancer will retry if the gRPC status code in the response header is set to cancelled
- deadline-exceeded: Loadbalancer will retry if the gRPC status code in the response header is set to deadline-exceeded
- resource-exhausted: Loadbalancer will retry if the gRPC status code in the response header is set to resource-exhausted
- unavailable: Loadbalancer will retry if the gRPC status code in the response header is set to unavailable
URLMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeout, URLMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeoutArgs
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
URLMapPathMatcherRouteRuleRouteActionTimeout, URLMapPathMatcherRouteRuleRouteActionTimeoutArgs
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- Seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- Nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Integer
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds string
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds str
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos int
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
- seconds String
- Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
- nanos Number
- Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
URLMapPathMatcherRouteRuleRouteActionUrlRewrite, URLMapPathMatcherRouteRuleRouteActionUrlRewriteArgs
- Host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- Path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- Path
Template stringRewrite - Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.
- Host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- Path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- Path
Template stringRewrite - Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.
- host
Rewrite String - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix StringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- path
Template StringRewrite - Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.
- host
Rewrite string - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix stringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- path
Template stringRewrite - Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.
- host_
rewrite str - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path_
prefix_ strrewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- path_
template_ strrewrite - Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.
- host
Rewrite String - Prior to forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be between 1 and 255 characters.
- path
Prefix StringRewrite - Prior to forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be between 1 and 1024 characters.
- path
Template StringRewrite - Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.
URLMapPathMatcherRouteRuleRouteActionWeightedBackendService, URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceArgs
- Backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- Weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- Header
Action URLMapPath Matcher Route Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- Backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- Weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- Header
Action URLMapPath Matcher Route Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- backend
Service String - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- weight Integer
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- header
Action URLMapPath Matcher Route Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- backend
Service string - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- weight number
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- header
Action URLMapPath Matcher Route Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- backend_
service str - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- weight int
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- header_
action URLMapPath Matcher Route Rule Route Action Weighted Backend Service Header Action - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
- backend
Service String - The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the loadbalancer applies any relevant headerActions specified as part of this backendServiceWeight.
- weight Number
- Specifies the fraction of traffic sent to backendService, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backendService, subsequent requests will be sent to the same backendService as determined by the BackendService's session affinity policy. The value must be between 0 and 1000
- header
Action Property Map - Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. Structure is documented below.
URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderAction, URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionArgs
- Request
Headers List<URLMapTo Adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers List<string>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers List<URLMapTo Adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers List<string>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- Request
Headers []URLMapTo Adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Request Headers To Add - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- Request
Headers []stringTo Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- Response
Headers []URLMapTo Adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Response Headers To Add - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- Response
Headers []stringTo Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<URLMapTo Adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Request Headers To Add> - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<URLMapTo Adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Response Headers To Add> - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers URLMapTo Adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Request Headers To Add[] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers string[]To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers URLMapTo Adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Response Headers To Add[] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers string[]To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request_
headers_ Sequence[URLMapto_ adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Request Headers To Add] - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response_
headers_ Sequence[URLMapto_ adds Path Matcher Route Rule Route Action Weighted Backend Service Header Action Response Headers To Add] - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response_
headers_ Sequence[str]to_ removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
- request
Headers List<Property Map>To Adds - Headers to add to a matching request prior to forwarding the request to the backendService. Structure is documented below.
- request
Headers List<String>To Removes - A list of header names for headers that need to be removed from the request prior to forwarding the request to the backendService.
- response
Headers List<Property Map>To Adds - Headers to add the response prior to sending the response back to the client. Structure is documented below.
- response
Headers List<String>To Removes - A list of header names for headers that need to be removed from the response prior to sending the response back to the client.
URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd, URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd, URLMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- Header
Name string - The name of the header to add.
- Header
Value string - The value of the header to add.
- Replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name string - The name of the header to add.
- header
Value string - The value of the header to add.
- replace boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header_
name str - The name of the header to add.
- header_
value str - The value of the header to add.
- replace bool
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
- header
Name String - The name of the header to add.
- header
Value String - The value of the header to add.
- replace Boolean
- If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header.
URLMapPathMatcherRouteRuleUrlRedirect, URLMapPathMatcherRouteRuleUrlRedirectArgs
- Host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- Https
Redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- Path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- Prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- Redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- Strip
Query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- Host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- Https
Redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- Path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- Prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- Redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- Strip
Query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- host
Redirect String - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect Boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- path
Redirect String - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- prefix
Redirect String - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- redirect
Response StringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query Boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- host
Redirect string - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- path
Redirect string - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- prefix
Redirect string - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- redirect
Response stringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- host_
redirect str - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https_
redirect bool - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- path_
redirect str - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- prefix_
redirect str - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- redirect_
response_ strcode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip_
query bool - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
- host
Redirect String - The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.
- https
Redirect Boolean - If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. Defaults to false.
- path
Redirect String - The path that will be used in the redirect response instead of the one that was supplied in the request. Only one of pathRedirect or prefixRedirect must be specified. The value must be between 1 and 1024 characters.
- prefix
Redirect String - The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request.
- redirect
Response StringCode - The HTTP Status code to use for this RedirectAction. Supported values are:
- MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
- FOUND, which corresponds to 302.
- SEE_OTHER which corresponds to 303.
- TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
- PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.
- strip
Query Boolean - If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. Defaults to false.
URLMapTest, URLMapTestArgs
- Host string
- Host portion of the URL.
- Path string
- Path portion of the URL.
- Service string
- The backend service or backend bucket link that should be matched by this test.
- Description string
- Description of this test case.
- Host string
- Host portion of the URL.
- Path string
- Path portion of the URL.
- Service string
- The backend service or backend bucket link that should be matched by this test.
- Description string
- Description of this test case.
- host String
- Host portion of the URL.
- path String
- Path portion of the URL.
- service String
- The backend service or backend bucket link that should be matched by this test.
- description String
- Description of this test case.
- host string
- Host portion of the URL.
- path string
- Path portion of the URL.
- service string
- The backend service or backend bucket link that should be matched by this test.
- description string
- Description of this test case.
- host str
- Host portion of the URL.
- path str
- Path portion of the URL.
- service str
- The backend service or backend bucket link that should be matched by this test.
- description str
- Description of this test case.
- host String
- Host portion of the URL.
- path String
- Path portion of the URL.
- service String
- The backend service or backend bucket link that should be matched by this test.
- description String
- Description of this test case.
Import
UrlMap can be imported using any of these accepted formats:
projects/{{project}}/global/urlMaps/{{name}}{{project}}/{{name}}{{name}}
When using the pulumi import command, UrlMap can be imported using one of the formats above. For example:
$ pulumi import gcp:compute/uRLMap:URLMap default projects/{{project}}/global/urlMaps/{{name}}
$ pulumi import gcp:compute/uRLMap:URLMap default {{project}}/{{name}}
$ pulumi import gcp:compute/uRLMap:URLMap default {{name}}
To learn more about importing existing cloud resources, see Importing resources.
Package Details
- Repository
- Google Cloud (GCP) Classic pulumi/pulumi-gcp
- License
- Apache-2.0
- Notes
- This Pulumi package is based on the
google-betaTerraform Provider.