gcp.compute.RegionUrlMap

PerTryTimeout RegionUrlMapDefaultRouteActionRetryPolicyPerTryTimeout

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

Specifies a non-zero timeout per retry attempt. If not specified, will use the timeout set in HttpRouteAction. If timeout in HttpRouteAction is not set, will use the largest timeout among all backend services associated with the route. Structure is documented below.

RetryConditions List<string>

Specifies one or more conditions when this retry policy applies. Valid values are listed below. Only the following codes are supported when the URL map is bound to target gRPC proxy that has validateForProxyless field set to true: cancelled, deadline-exceeded, internal, resource-exhausted, unavailable.

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

PerTryTimeout RegionUrlMapDefaultRouteActionRetryPolicyPerTryTimeout

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

RetryConditions []string

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

numRetries Integer

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

perTryTimeout RegionUrlMapDefaultRouteActionRetryPolicyPerTryTimeout

retryConditions List<String>

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

numRetries number

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

perTryTimeout RegionUrlMapDefaultRouteActionRetryPolicyPerTryTimeout

retryConditions string[]

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

num_retries int

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

per_try_timeout RegionUrlMapDefaultRouteActionRetryPolicyPerTryTimeout

retry_conditions Sequence[str]

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

numRetries Number

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

perTryTimeout Property Map

retryConditions List<String>

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

RegionUrlMapDefaultRouteActionRetryPolicyPerTryTimeout, RegionUrlMapDefaultRouteActionRetryPolicyPerTryTimeoutArgs

Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos Integer: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
seconds str: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos Number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

RegionUrlMapDefaultRouteActionTimeout, RegionUrlMapDefaultRouteActionTimeoutArgs

Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos Integer: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
seconds str: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

nanos Number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.
seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years

RegionUrlMapDefaultRouteActionUrlRewrite, RegionUrlMapDefaultRouteActionUrlRewriteArgs

HostRewrite string: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
PathPrefixRewrite string: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

HostRewrite string: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
PathPrefixRewrite string: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

hostRewrite String: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
pathPrefixRewrite String: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

hostRewrite string: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
pathPrefixRewrite string: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

host_rewrite str: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
path_prefix_rewrite str: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

hostRewrite String: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
pathPrefixRewrite String: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

RegionUrlMapDefaultRouteActionWeightedBackendService, RegionUrlMapDefaultRouteActionWeightedBackendServiceArgs

BackendService string: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
HeaderAction RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.
Weight int: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.

BackendService string: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
HeaderAction RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.
Weight int: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.

backendService String: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
headerAction RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.
weight Integer: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.

backendService string: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
headerAction RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.
weight number: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.

backend_service str: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
header_action RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.
weight int: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.

backendService String: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
headerAction Property Map: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.
weight Number: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.

RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderAction, RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionArgs

RequestHeadersToAdds List<RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
RequestHeadersToRemoves List<string>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
ResponseHeadersToAdds List<RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd>: Headers to add the response before sending the response back to the client. Structure is documented below.
ResponseHeadersToRemoves List<string>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

RequestHeadersToAdds []RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
RequestHeadersToRemoves []string: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
ResponseHeadersToAdds []RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd: Headers to add the response before sending the response back to the client. Structure is documented below.
ResponseHeadersToRemoves []string: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds List<RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds List<RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd>: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd[]: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves string[]: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd[]: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves string[]: A list of header names for headers that need to be removed from the response before sending the response back to the client.

request_headers_to_adds Sequence[RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd]: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
request_headers_to_removes Sequence[str]: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
response_headers_to_adds Sequence[RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd]: Headers to add the response before sending the response back to the client. Structure is documented below.
response_headers_to_removes Sequence[str]: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds List<Property Map>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds List<Property Map>: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd, RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName string: The name of the header.
headerValue string: The value of the header to add.
replace boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

header_name str: The name of the header.
header_value str: The value of the header to add.
replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd, RegionUrlMapDefaultRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName string: The name of the header.
headerValue string: The value of the header to add.
replace boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

header_name str: The name of the header.
header_value str: The value of the header to add.
replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

RegionUrlMapDefaultUrlRedirect, RegionUrlMapDefaultUrlRedirectArgs

StripQuery bool

If set to true, any accompanying query portion of the original URL is removed prior to redirecting the request. If set to false, the query portion of the original URL is retained. This field is required to ensure an empty block is not set. The normal default value is false.

HostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

If set to true, the URL scheme in the redirected request is set to https. If set to false, the URL scheme of the redirected request will remain the same as that of the request. This must only be set for UrlMaps used in TargetHttpProxys. Setting this true for TargetHttpsProxy is not permitted. The default is set to false.

PathRedirect string

The path that will be used in the redirect response instead of the one that was supplied in the request. pathRedirect cannot be supplied together with prefixRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.

PrefixRedirect string

The prefix that replaces the prefixMatch specified in the HttpRouteRuleMatch, retaining the remaining portion of the URL before redirecting the request. prefixRedirect cannot be supplied together with pathRedirect. Supply one alone or neither. If neither is supplied, the path of the original request will be used for the redirect. The value must be between 1 and 1024 characters.

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

StripQuery bool

HostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

PathRedirect string

PrefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery Boolean

hostRedirect String

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect Boolean

pathRedirect String

prefixRedirect String

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery boolean

hostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect boolean

pathRedirect string

prefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

strip_query bool

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery Boolean

hostRedirect String

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect Boolean

pathRedirect String

prefixRedirect String

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

RegionUrlMapHostRule, RegionUrlMapHostRuleArgs

Hosts List<string>: The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
PathMatcher string: The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
Description string: An optional description of this HostRule. Provide this property when you create the resource.

Hosts []string: The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
PathMatcher string: The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
Description string: An optional description of this HostRule. Provide this property when you create the resource.

hosts List<String>: The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
pathMatcher String: The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
description String: An optional description of this HostRule. Provide this property when you create the resource.

hosts string[]: The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
pathMatcher string: The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
description string: An optional description of this HostRule. Provide this property when you create the resource.

hosts Sequence[str]: The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
path_matcher str: The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
description str: An optional description of this HostRule. Provide this property when you create the resource.

hosts List<String>: The list of host patterns to match. They must be valid hostnames, except * will match any string of ([a-z0-9-.]*). In that case, * must be the first character and must be followed in the pattern by either - or ..
pathMatcher String: The name of the PathMatcher to use to match the path portion of the URL if the hostRule matches the URL's host portion.
description String: An optional description of this HostRule. Provide this property when you create the resource.

RegionUrlMapPathMatcher, RegionUrlMapPathMatcherArgs

Name string: The name to which this PathMatcher is referred by the HostRule.
DefaultService string: A reference to a RegionBackendService resource. This will be used if none of the pathRules defined by this PathMatcher is matched by the URL's path portion.
DefaultUrlRedirect RegionUrlMapPathMatcherDefaultUrlRedirect: When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
Description string: An optional description of this resource.
PathRules List<RegionUrlMapPathMatcherPathRule>: The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
RouteRules List<RegionUrlMapPathMatcherRouteRule>: The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.

Name string: The name to which this PathMatcher is referred by the HostRule.
DefaultService string: A reference to a RegionBackendService resource. This will be used if none of the pathRules defined by this PathMatcher is matched by the URL's path portion.
DefaultUrlRedirect RegionUrlMapPathMatcherDefaultUrlRedirect: When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
Description string: An optional description of this resource.
PathRules []RegionUrlMapPathMatcherPathRule: The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
RouteRules []RegionUrlMapPathMatcherRouteRule: The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.

name String: The name to which this PathMatcher is referred by the HostRule.
defaultService String: A reference to a RegionBackendService resource. This will be used if none of the pathRules defined by this PathMatcher is matched by the URL's path portion.
defaultUrlRedirect RegionUrlMapPathMatcherDefaultUrlRedirect: When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
description String: An optional description of this resource.
pathRules List<RegionUrlMapPathMatcherPathRule>: The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
routeRules List<RegionUrlMapPathMatcherRouteRule>: The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.

name string: The name to which this PathMatcher is referred by the HostRule.
defaultService string: A reference to a RegionBackendService resource. This will be used if none of the pathRules defined by this PathMatcher is matched by the URL's path portion.
defaultUrlRedirect RegionUrlMapPathMatcherDefaultUrlRedirect: When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
description string: An optional description of this resource.
pathRules RegionUrlMapPathMatcherPathRule[]: The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
routeRules RegionUrlMapPathMatcherRouteRule[]: The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.

name str: The name to which this PathMatcher is referred by the HostRule.
default_service str: A reference to a RegionBackendService resource. This will be used if none of the pathRules defined by this PathMatcher is matched by the URL's path portion.
default_url_redirect RegionUrlMapPathMatcherDefaultUrlRedirect: When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
description str: An optional description of this resource.
path_rules Sequence[RegionUrlMapPathMatcherPathRule]: The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
route_rules Sequence[RegionUrlMapPathMatcherRouteRule]: The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.

name String: The name to which this PathMatcher is referred by the HostRule.
defaultService String: A reference to a RegionBackendService resource. This will be used if none of the pathRules defined by this PathMatcher is matched by the URL's path portion.
defaultUrlRedirect Property Map: When none of the specified hostRules match, the request is redirected to a URL specified by defaultUrlRedirect. If defaultUrlRedirect is specified, defaultService or defaultRouteAction must not be set. Structure is documented below.
description String: An optional description of this resource.
pathRules List<Property Map>: The list of path rules. Use this list instead of routeRules when routing based on simple path matching is all that's required. The order by which path rules are specified does not matter. Matches are always done on the longest-path-first basis. For example: a pathRule with a path /a/b/c/* will match before /a/b/* irrespective of the order in which those paths appear in this list. Within a given pathMatcher, only one of pathRules or routeRules must be set. Structure is documented below.
routeRules List<Property Map>: The list of ordered HTTP route rules. Use this list instead of pathRules when advanced route matching and routing actions are desired. The order of specifying routeRules matters: the first rule that matches will cause its specified routing action to take effect. Within a given pathMatcher, only one of pathRules or routeRules must be set. routeRules are not supported in UrlMaps intended for External load balancers. Structure is documented below.

RegionUrlMapPathMatcherDefaultUrlRedirect, RegionUrlMapPathMatcherDefaultUrlRedirectArgs

StripQuery bool

HostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

PathRedirect string

PrefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

StripQuery bool

HostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

PathRedirect string

PrefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery Boolean

hostRedirect String

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect Boolean

pathRedirect String

prefixRedirect String

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery boolean

hostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect boolean

pathRedirect string

prefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

strip_query bool

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery Boolean

hostRedirect String

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect Boolean

pathRedirect String

prefixRedirect String

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

RegionUrlMapPathMatcherPathRule, RegionUrlMapPathMatcherPathRuleArgs

Paths List<string>: The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
RouteAction RegionUrlMapPathMatcherPathRuleRouteAction: In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
Service string: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
UrlRedirect RegionUrlMapPathMatcherPathRuleUrlRedirect: When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

Paths []string: The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
RouteAction RegionUrlMapPathMatcherPathRuleRouteAction: In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
Service string: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
UrlRedirect RegionUrlMapPathMatcherPathRuleUrlRedirect: When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

paths List<String>: The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
routeAction RegionUrlMapPathMatcherPathRuleRouteAction: In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
service String: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
urlRedirect RegionUrlMapPathMatcherPathRuleUrlRedirect: When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

paths string[]: The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
routeAction RegionUrlMapPathMatcherPathRuleRouteAction: In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
service string: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
urlRedirect RegionUrlMapPathMatcherPathRuleUrlRedirect: When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

paths Sequence[str]: The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
route_action RegionUrlMapPathMatcherPathRuleRouteAction: In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
service str: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
url_redirect RegionUrlMapPathMatcherPathRuleUrlRedirect: When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

paths List<String>: The list of path patterns to match. Each must start with / and the only place a * is allowed is at the end following a /. The string fed to the path matcher does not include any text after the first ? or #, and those chars are not allowed here.
routeAction Property Map: In response to a matching path, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
service String: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
urlRedirect Property Map: When a path pattern is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

RegionUrlMapPathMatcherPathRuleRouteAction, RegionUrlMapPathMatcherPathRuleRouteActionArgs

CorsPolicy RegionUrlMapPathMatcherPathRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
FaultInjectionPolicy RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
RequestMirrorPolicy RegionUrlMapPathMatcherPathRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
RetryPolicy RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
Timeout RegionUrlMapPathMatcherPathRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
UrlRewrite RegionUrlMapPathMatcherPathRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
WeightedBackendServices List<RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendService>: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

CorsPolicy RegionUrlMapPathMatcherPathRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
FaultInjectionPolicy RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
RequestMirrorPolicy RegionUrlMapPathMatcherPathRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
RetryPolicy RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
Timeout RegionUrlMapPathMatcherPathRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
UrlRewrite RegionUrlMapPathMatcherPathRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
WeightedBackendServices []RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendService: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

corsPolicy RegionUrlMapPathMatcherPathRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
faultInjectionPolicy RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
requestMirrorPolicy RegionUrlMapPathMatcherPathRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
retryPolicy RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
timeout RegionUrlMapPathMatcherPathRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
urlRewrite RegionUrlMapPathMatcherPathRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
weightedBackendServices List<RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendService>: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

corsPolicy RegionUrlMapPathMatcherPathRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
faultInjectionPolicy RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
requestMirrorPolicy RegionUrlMapPathMatcherPathRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
retryPolicy RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
timeout RegionUrlMapPathMatcherPathRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
urlRewrite RegionUrlMapPathMatcherPathRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
weightedBackendServices RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendService[]: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

cors_policy RegionUrlMapPathMatcherPathRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
fault_injection_policy RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
request_mirror_policy RegionUrlMapPathMatcherPathRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
retry_policy RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
timeout RegionUrlMapPathMatcherPathRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
url_rewrite RegionUrlMapPathMatcherPathRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
weighted_backend_services Sequence[RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendService]: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

corsPolicy Property Map: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
faultInjectionPolicy Property Map: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
requestMirrorPolicy Property Map: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
retryPolicy Property Map: Specifies the retry policy associated with this route. Structure is documented below.
timeout Property Map: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
urlRewrite Property Map: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
weightedBackendServices List<Property Map>: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

RegionUrlMapPathMatcherPathRuleRouteActionCorsPolicy, RegionUrlMapPathMatcherPathRuleRouteActionCorsPolicyArgs

Disabled bool: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
AllowCredentials bool: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
AllowHeaders List<string>: Specifies the content for the Access-Control-Allow-Headers header.
AllowMethods List<string>: Specifies the content for the Access-Control-Allow-Methods header.
AllowOriginRegexes List<string>: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
AllowOrigins List<string>: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
ExposeHeaders List<string>: Specifies the content for the Access-Control-Expose-Headers header.
MaxAge int: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

Disabled bool: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
AllowCredentials bool: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
AllowHeaders []string: Specifies the content for the Access-Control-Allow-Headers header.
AllowMethods []string: Specifies the content for the Access-Control-Allow-Methods header.
AllowOriginRegexes []string: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
AllowOrigins []string: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
ExposeHeaders []string: Specifies the content for the Access-Control-Expose-Headers header.
MaxAge int: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

disabled Boolean: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
allowCredentials Boolean: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
allowHeaders List<String>: Specifies the content for the Access-Control-Allow-Headers header.
allowMethods List<String>: Specifies the content for the Access-Control-Allow-Methods header.
allowOriginRegexes List<String>: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
allowOrigins List<String>: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
exposeHeaders List<String>: Specifies the content for the Access-Control-Expose-Headers header.
maxAge Integer: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

disabled boolean: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
allowCredentials boolean: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
allowHeaders string[]: Specifies the content for the Access-Control-Allow-Headers header.
allowMethods string[]: Specifies the content for the Access-Control-Allow-Methods header.
allowOriginRegexes string[]: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
allowOrigins string[]: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
exposeHeaders string[]: Specifies the content for the Access-Control-Expose-Headers header.
maxAge number: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

disabled bool: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
allow_credentials bool: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
allow_headers Sequence[str]: Specifies the content for the Access-Control-Allow-Headers header.
allow_methods Sequence[str]: Specifies the content for the Access-Control-Allow-Methods header.
allow_origin_regexes Sequence[str]: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
allow_origins Sequence[str]: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
expose_headers Sequence[str]: Specifies the content for the Access-Control-Expose-Headers header.
max_age int: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

disabled Boolean: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
allowCredentials Boolean: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
allowHeaders List<String>: Specifies the content for the Access-Control-Allow-Headers header.
allowMethods List<String>: Specifies the content for the Access-Control-Allow-Methods header.
allowOriginRegexes List<String>: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
allowOrigins List<String>: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
exposeHeaders List<String>: Specifies the content for the Access-Control-Expose-Headers header.
maxAge Number: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicy, RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyArgs

Abort RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
Delay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

Abort RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
Delay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

abort RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
delay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

abort RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
delay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

abort RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
delay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

abort Property Map: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
delay Property Map: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbort, RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyAbortArgs

HttpStatus int: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
Percentage double: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

HttpStatus int: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
Percentage float64: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

httpStatus Integer: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
percentage Double: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

httpStatus number: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
percentage number: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

http_status int: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
percentage float: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

httpStatus Number: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
percentage Number: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelay, RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayArgs

FixedDelay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
Percentage double: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

FixedDelay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
Percentage float64: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

fixedDelay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
percentage Double: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

fixedDelay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
percentage number: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

fixed_delay RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
percentage float: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

fixedDelay Property Map: Specifies the value of the fixed delay interval. Structure is documented below.
percentage Number: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelay, RegionUrlMapPathMatcherPathRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Integer: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds str: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

RegionUrlMapPathMatcherPathRuleRouteActionRequestMirrorPolicy, RegionUrlMapPathMatcherPathRuleRouteActionRequestMirrorPolicyArgs

BackendService string: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

BackendService string: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

backendService String: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

backendService string: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

backend_service str: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

backendService String: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicy, RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicyArgs

PerTryTimeout RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeout

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

RetryConditions List<string>

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

PerTryTimeout RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeout

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

RetryConditions []string

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

numRetries Integer

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

perTryTimeout RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeout

retryConditions List<String>

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

numRetries number

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

perTryTimeout RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeout

retryConditions string[]

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

num_retries int

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

per_try_timeout RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeout

retry_conditions Sequence[str]

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

numRetries Number

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

perTryTimeout Property Map

retryConditions List<String>

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeout, RegionUrlMapPathMatcherPathRuleRouteActionRetryPolicyPerTryTimeoutArgs

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Integer: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds str: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

RegionUrlMapPathMatcherPathRuleRouteActionTimeout, RegionUrlMapPathMatcherPathRuleRouteActionTimeoutArgs

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Integer: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds str: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

RegionUrlMapPathMatcherPathRuleRouteActionUrlRewrite, RegionUrlMapPathMatcherPathRuleRouteActionUrlRewriteArgs

HostRewrite string: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
PathPrefixRewrite string: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

HostRewrite string: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
PathPrefixRewrite string: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

hostRewrite String: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
pathPrefixRewrite String: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

hostRewrite string: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
pathPrefixRewrite string: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

host_rewrite str: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
path_prefix_rewrite str: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

hostRewrite String: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
pathPrefixRewrite String: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.

RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendService, RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceArgs

BackendService string: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
Weight int: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
HeaderAction RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

BackendService string: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
Weight int: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
HeaderAction RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

backendService String: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
weight Integer: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
headerAction RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

backendService string: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
weight number: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
headerAction RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

backend_service str: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
weight int: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
header_action RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

backendService String: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
weight Number: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
headerAction Property Map: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderAction, RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionArgs

RequestHeadersToAdds List<RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
RequestHeadersToRemoves List<string>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
ResponseHeadersToAdds List<RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd>: Headers to add the response before sending the response back to the client. Structure is documented below.
ResponseHeadersToRemoves List<string>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

RequestHeadersToAdds []RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
RequestHeadersToRemoves []string: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
ResponseHeadersToAdds []RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd: Headers to add the response before sending the response back to the client. Structure is documented below.
ResponseHeadersToRemoves []string: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds List<RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds List<RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd>: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd[]: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves string[]: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd[]: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves string[]: A list of header names for headers that need to be removed from the response before sending the response back to the client.

request_headers_to_adds Sequence[RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd]: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
request_headers_to_removes Sequence[str]: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
response_headers_to_adds Sequence[RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd]: Headers to add the response before sending the response back to the client. Structure is documented below.
response_headers_to_removes Sequence[str]: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds List<Property Map>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds List<Property Map>: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd, RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName string: The name of the header.
headerValue string: The value of the header to add.
replace boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

header_name str: The name of the header.
header_value str: The value of the header to add.
replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd, RegionUrlMapPathMatcherPathRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName string: The name of the header.
headerValue string: The value of the header to add.
replace boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

header_name str: The name of the header.
header_value str: The value of the header to add.
replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

RegionUrlMapPathMatcherPathRuleUrlRedirect, RegionUrlMapPathMatcherPathRuleUrlRedirectArgs

StripQuery bool

HostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

PathRedirect string

PrefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

StripQuery bool

HostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

PathRedirect string

PrefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery Boolean

hostRedirect String

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect Boolean

pathRedirect String

prefixRedirect String

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery boolean

hostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect boolean

pathRedirect string

prefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

strip_query bool

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery Boolean

hostRedirect String

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect Boolean

pathRedirect String

prefixRedirect String

RangeMatch RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatch

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

RegionUrlMapPathMatcherRouteRule, RegionUrlMapPathMatcherRouteRuleArgs

Priority int: For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
HeaderAction RegionUrlMapPathMatcherRouteRuleHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
MatchRules List<RegionUrlMapPathMatcherRouteRuleMatchRule>: The rules for determining a match. Structure is documented below.
RouteAction RegionUrlMapPathMatcherRouteRuleRouteAction: In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
Service string: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
UrlRedirect RegionUrlMapPathMatcherRouteRuleUrlRedirect: When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

Priority int: For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
HeaderAction RegionUrlMapPathMatcherRouteRuleHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
MatchRules []RegionUrlMapPathMatcherRouteRuleMatchRule: The rules for determining a match. Structure is documented below.
RouteAction RegionUrlMapPathMatcherRouteRuleRouteAction: In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
Service string: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
UrlRedirect RegionUrlMapPathMatcherRouteRuleUrlRedirect: When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

priority Integer: For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
headerAction RegionUrlMapPathMatcherRouteRuleHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
matchRules List<RegionUrlMapPathMatcherRouteRuleMatchRule>: The rules for determining a match. Structure is documented below.
routeAction RegionUrlMapPathMatcherRouteRuleRouteAction: In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
service String: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
urlRedirect RegionUrlMapPathMatcherRouteRuleUrlRedirect: When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

priority number: For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
headerAction RegionUrlMapPathMatcherRouteRuleHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
matchRules RegionUrlMapPathMatcherRouteRuleMatchRule[]: The rules for determining a match. Structure is documented below.
routeAction RegionUrlMapPathMatcherRouteRuleRouteAction: In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
service string: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
urlRedirect RegionUrlMapPathMatcherRouteRuleUrlRedirect: When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

priority int: For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
header_action RegionUrlMapPathMatcherRouteRuleHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
match_rules Sequence[RegionUrlMapPathMatcherRouteRuleMatchRule]: The rules for determining a match. Structure is documented below.
route_action RegionUrlMapPathMatcherRouteRuleRouteAction: In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
service str: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
url_redirect RegionUrlMapPathMatcherRouteRuleUrlRedirect: When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

priority Number: For routeRules within a given pathMatcher, priority determines the order in which load balancer will interpret routeRules. RouteRules are evaluated in order of priority, from the lowest to highest number. The priority of a rule decreases as its number increases (1, 2, 3, N+1). The first rule that matches the request is applied. You cannot configure two or more routeRules with the same priority. Priority for each rule must be set to a number between 0 and 2147483647 inclusive. Priority numbers can have gaps, which enable you to add or remove rules in the future without affecting the rest of the rules. For example, 1, 2, 3, 4, 5, 9, 12, 16 is a valid series of priority numbers to which you could add rules numbered from 6 to 8, 10 to 11, and 13 to 15 in the future without any impact on existing rules.
headerAction Property Map: Specifies changes to request and response headers that need to take effect for the selected backendService. The headerAction specified here are applied before the matching pathMatchers[].headerAction and after pathMatchers[].routeRules[].r outeAction.weightedBackendService.backendServiceWeightAction[].headerAction Structure is documented below.
matchRules List<Property Map>: The rules for determining a match. Structure is documented below.
routeAction Property Map: In response to a matching matchRule, the load balancer performs advanced routing actions like URL rewrites, header transformations, etc. prior to forwarding the request to the selected backend. If routeAction specifies any weightedBackendServices, service must not be set. Conversely if service is set, routeAction cannot contain any weightedBackendServices. Only one of routeAction or urlRedirect must be set. Structure is documented below.
service String: The region backend service resource to which traffic is directed if this rule is matched. If routeAction is additionally specified, advanced routing actions like URL Rewrites, etc. take effect prior to sending the request to the backend. However, if service is specified, routeAction cannot contain any weightedBackendService s. Conversely, if routeAction specifies any weightedBackendServices, service must not be specified. Only one of urlRedirect, service or routeAction.weightedBackendService must be set.
urlRedirect Property Map: When this rule is matched, the request is redirected to a URL specified by urlRedirect. If urlRedirect is specified, service or routeAction must not be set. Structure is documented below.

RegionUrlMapPathMatcherRouteRuleHeaderAction, RegionUrlMapPathMatcherRouteRuleHeaderActionArgs

RequestHeadersToAdds List<RegionUrlMapPathMatcherRouteRuleHeaderActionRequestHeadersToAdd>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
RequestHeadersToRemoves List<string>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
ResponseHeadersToAdds List<RegionUrlMapPathMatcherRouteRuleHeaderActionResponseHeadersToAdd>: Headers to add the response before sending the response back to the client. Structure is documented below.
ResponseHeadersToRemoves List<string>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

RequestHeadersToAdds []RegionUrlMapPathMatcherRouteRuleHeaderActionRequestHeadersToAdd: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
RequestHeadersToRemoves []string: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
ResponseHeadersToAdds []RegionUrlMapPathMatcherRouteRuleHeaderActionResponseHeadersToAdd: Headers to add the response before sending the response back to the client. Structure is documented below.
ResponseHeadersToRemoves []string: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds List<RegionUrlMapPathMatcherRouteRuleHeaderActionRequestHeadersToAdd>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds List<RegionUrlMapPathMatcherRouteRuleHeaderActionResponseHeadersToAdd>: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds RegionUrlMapPathMatcherRouteRuleHeaderActionRequestHeadersToAdd[]: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves string[]: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds RegionUrlMapPathMatcherRouteRuleHeaderActionResponseHeadersToAdd[]: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves string[]: A list of header names for headers that need to be removed from the response before sending the response back to the client.

request_headers_to_adds Sequence[RegionUrlMapPathMatcherRouteRuleHeaderActionRequestHeadersToAdd]: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
request_headers_to_removes Sequence[str]: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
response_headers_to_adds Sequence[RegionUrlMapPathMatcherRouteRuleHeaderActionResponseHeadersToAdd]: Headers to add the response before sending the response back to the client. Structure is documented below.
response_headers_to_removes Sequence[str]: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds List<Property Map>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds List<Property Map>: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

RegionUrlMapPathMatcherRouteRuleHeaderActionRequestHeadersToAdd, RegionUrlMapPathMatcherRouteRuleHeaderActionRequestHeadersToAddArgs

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName string: The name of the header.
headerValue string: The value of the header to add.
replace boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

header_name str: The name of the header.
header_value str: The value of the header to add.
replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

RegionUrlMapPathMatcherRouteRuleHeaderActionResponseHeadersToAdd, RegionUrlMapPathMatcherRouteRuleHeaderActionResponseHeadersToAddArgs

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName string: The name of the header.
headerValue string: The value of the header to add.
replace boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

header_name str: The name of the header.
header_value str: The value of the header to add.
replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

RegionUrlMapPathMatcherRouteRuleMatchRule, RegionUrlMapPathMatcherRouteRuleMatchRuleArgs

FullPathMatch string: For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
HeaderMatches List<RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatch>: Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
IgnoreCase bool: Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
MetadataFilters List<RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilter>: Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
PathTemplateMatch string: For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
PrefixMatch string: For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
QueryParameterMatches List<RegionUrlMapPathMatcherRouteRuleMatchRuleQueryParameterMatch>: Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
RegexMatch string: For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.

FullPathMatch string: For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
HeaderMatches []RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatch: Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
IgnoreCase bool: Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
MetadataFilters []RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilter: Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
PathTemplateMatch string: For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
PrefixMatch string: For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
QueryParameterMatches []RegionUrlMapPathMatcherRouteRuleMatchRuleQueryParameterMatch: Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
RegexMatch string: For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.

fullPathMatch String: For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
headerMatches List<RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatch>: Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
ignoreCase Boolean: Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
metadataFilters List<RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilter>: Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
pathTemplateMatch String: For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
prefixMatch String: For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
queryParameterMatches List<RegionUrlMapPathMatcherRouteRuleMatchRuleQueryParameterMatch>: Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
regexMatch String: For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.

fullPathMatch string: For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
headerMatches RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatch[]: Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
ignoreCase boolean: Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
metadataFilters RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilter[]: Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
pathTemplateMatch string: For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
prefixMatch string: For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
queryParameterMatches RegionUrlMapPathMatcherRouteRuleMatchRuleQueryParameterMatch[]: Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
regexMatch string: For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.

full_path_match str: For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
header_matches Sequence[RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatch]: Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
ignore_case bool: Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
metadata_filters Sequence[RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilter]: Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
path_template_match str: For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
prefix_match str: For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
query_parameter_matches Sequence[RegionUrlMapPathMatcherRouteRuleMatchRuleQueryParameterMatch]: Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
regex_match str: For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.

fullPathMatch String: For satisfying the matchRule condition, the path of the request must exactly match the value specified in fullPathMatch after removing any query parameters and anchor that may be part of the original URL. FullPathMatch must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
headerMatches List<Property Map>: Specifies a list of header match criteria, all of which must match corresponding headers in the request. Structure is documented below.
ignoreCase Boolean: Specifies that prefixMatch and fullPathMatch matches are case sensitive. Defaults to false.
metadataFilters List<Property Map>: Opaque filter criteria used by Loadbalancer to restrict routing configuration to a limited set xDS compliant clients. In their xDS requests to Loadbalancer, xDS clients present node metadata. If a match takes place, the relevant routing configuration is made available to those proxies. For each metadataFilter in this list, if its filterMatchCriteria is set to MATCH_ANY, at least one of the filterLabels must match the corresponding label provided in the metadata. If its filterMatchCriteria is set to MATCH_ALL, then all of its filterLabels must match with corresponding labels in the provided metadata. metadataFilters specified here can be overrides those specified in ForwardingRule that refers to this UrlMap. metadataFilters only applies to Loadbalancers that have their loadBalancingScheme set to INTERNAL_SELF_MANAGED. Structure is documented below.
pathTemplateMatch String: For satisfying the matchRule condition, the path of the request must match the wildcard pattern specified in pathTemplateMatch after removing any query parameters and anchor that may be part of the original URL. pathTemplateMatch must be between 1 and 255 characters (inclusive). The pattern specified by pathTemplateMatch may have at most 5 wildcard operators and at most 5 variable captures in total.
prefixMatch String: For satisfying the matchRule condition, the request's path must begin with the specified prefixMatch. prefixMatch must begin with a /. The value must be between 1 and 1024 characters. Only one of prefixMatch, fullPathMatch or regexMatch must be specified.
queryParameterMatches List<Property Map>: Specifies a list of query parameter match criteria, all of which must match corresponding query parameters in the request. Structure is documented below.
regexMatch String: For satisfying the matchRule condition, the path of the request must satisfy the regular expression specified in regexMatch after removing any query parameters and anchor supplied with the original URL. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript Only one of prefixMatch, fullPathMatch or regexMatch must be specified.

RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatch, RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatchArgs

HeaderName string

The name of the HTTP header to match. For matching against the HTTP request's authority, use a headerMatch with the header name ":authority". For matching a request's method, use the headerName ":method".

ExactMatch string

The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

InvertMatch bool

If set to false, the headerMatch is considered a match if the match criteria above are met. If set to true, the headerMatch is considered a match if the match criteria above are NOT met. Defaults to false.

PrefixMatch string

The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

PresentMatch bool

A header with the contents of headerName must exist. The match takes place whether or not the request's header has a value or not. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

The header value must be an integer and its value must be in the range specified in rangeMatch. If the header does not contain an integer, number or is empty, the match fails. For example for a range [-5, 0]

-3 will match
0 will not match
0.25 will not match
-3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.

RegexMatch string

The value of the header must match the regular expression specified in regexMatch. For regular expression grammar, please see: en.cppreference.com/w/cpp/regex/ecmascript For matching against a port specified in the HTTP request, use a headerMatch with headerName set to PORT and a regular expression that satisfies the RFC2616 Host header's port specifier. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

SuffixMatch string

The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

HeaderName string

ExactMatch string

The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

InvertMatch bool

PrefixMatch string

The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

PresentMatch bool

RangeMatch RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatch

-3 will match
0 will not match
0.25 will not match
-3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.

RegexMatch string

SuffixMatch string

The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

headerName String

exactMatch String

The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

invertMatch Boolean

prefixMatch String

The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

presentMatch Boolean

rangeMatch RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatch

-3 will match
0 will not match
0.25 will not match
-3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.

regexMatch String

suffixMatch String

The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

headerName string

exactMatch string

The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

invertMatch boolean

prefixMatch string

The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

presentMatch boolean

rangeMatch RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatch

-3 will match
0 will not match
0.25 will not match
-3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.

regexMatch string

suffixMatch string

The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

header_name str

exact_match str

The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

invert_match bool

prefix_match str

The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

present_match bool

range_match RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatch

-3 will match
0 will not match
0.25 will not match
-3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.

regex_match str

suffix_match str

The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

headerName String

exactMatch String

The value should exactly match contents of exactMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

invertMatch Boolean

prefixMatch String

The value of the header must start with the contents of prefixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

presentMatch Boolean

rangeMatch Property Map

-3 will match
0 will not match
0.25 will not match
-3someString will not match. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set. Structure is documented below.

regexMatch String

suffixMatch String

The value of the header must end with the contents of suffixMatch. Only one of exactMatch, prefixMatch, suffixMatch, regexMatch, presentMatch or rangeMatch must be set.

RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatch, RegionUrlMapPathMatcherRouteRuleMatchRuleHeaderMatchRangeMatchArgs

RangeEnd int: The end of the range (exclusive).
RangeStart int: The start of the range (inclusive).

RangeEnd int: The end of the range (exclusive).
RangeStart int: The start of the range (inclusive).

rangeEnd Integer: The end of the range (exclusive).
rangeStart Integer: The start of the range (inclusive).

rangeEnd number: The end of the range (exclusive).
rangeStart number: The start of the range (inclusive).

range_end int: The end of the range (exclusive).
range_start int: The start of the range (inclusive).

rangeEnd Number: The end of the range (exclusive).
rangeStart Number: The start of the range (inclusive).

RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilter, RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilterArgs

FilterLabels List<RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabel>

The list of label value pairs that must match labels in the provided metadata based on filterMatchCriteria This list must not be empty and can have at the most 64 entries. Structure is documented below.

FilterMatchCriteria string

Specifies how individual filterLabel matches within the list of filterLabels contribute towards the overall metadataFilter match. Supported values are:

MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
MATCH_ALL: All filterLabels must have matching labels in the provided metadata. Possible values are: MATCH_ALL, MATCH_ANY.

FilterLabels []RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabel

FilterMatchCriteria string

Specifies how individual filterLabel matches within the list of filterLabels contribute towards the overall metadataFilter match. Supported values are:

MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
MATCH_ALL: All filterLabels must have matching labels in the provided metadata. Possible values are: MATCH_ALL, MATCH_ANY.

filterLabels List<RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabel>

filterMatchCriteria String

Specifies how individual filterLabel matches within the list of filterLabels contribute towards the overall metadataFilter match. Supported values are:

MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
MATCH_ALL: All filterLabels must have matching labels in the provided metadata. Possible values are: MATCH_ALL, MATCH_ANY.

filterLabels RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabel[]

filterMatchCriteria string

Specifies how individual filterLabel matches within the list of filterLabels contribute towards the overall metadataFilter match. Supported values are:

MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
MATCH_ALL: All filterLabels must have matching labels in the provided metadata. Possible values are: MATCH_ALL, MATCH_ANY.

filter_labels Sequence[RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabel]

filter_match_criteria str

Specifies how individual filterLabel matches within the list of filterLabels contribute towards the overall metadataFilter match. Supported values are:

MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
MATCH_ALL: All filterLabels must have matching labels in the provided metadata. Possible values are: MATCH_ALL, MATCH_ANY.

filterLabels List<Property Map>

filterMatchCriteria String

Specifies how individual filterLabel matches within the list of filterLabels contribute towards the overall metadataFilter match. Supported values are:

MATCH_ANY: At least one of the filterLabels must have a matching label in the provided metadata.
MATCH_ALL: All filterLabels must have matching labels in the provided metadata. Possible values are: MATCH_ALL, MATCH_ANY.

RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabel, RegionUrlMapPathMatcherRouteRuleMatchRuleMetadataFilterFilterLabelArgs

Name string: Name of metadata label. The name can have a maximum length of 1024 characters and must be at least 1 character long.
Value string: The value of the label must match the specified value. value can have a maximum length of 1024 characters.

Name string: Name of metadata label. The name can have a maximum length of 1024 characters and must be at least 1 character long.
Value string: The value of the label must match the specified value. value can have a maximum length of 1024 characters.

name String: Name of metadata label. The name can have a maximum length of 1024 characters and must be at least 1 character long.
value String: The value of the label must match the specified value. value can have a maximum length of 1024 characters.

name string: Name of metadata label. The name can have a maximum length of 1024 characters and must be at least 1 character long.
value string: The value of the label must match the specified value. value can have a maximum length of 1024 characters.

name str: Name of metadata label. The name can have a maximum length of 1024 characters and must be at least 1 character long.
value str: The value of the label must match the specified value. value can have a maximum length of 1024 characters.

name String: Name of metadata label. The name can have a maximum length of 1024 characters and must be at least 1 character long.
value String: The value of the label must match the specified value. value can have a maximum length of 1024 characters.

RegionUrlMapPathMatcherRouteRuleMatchRuleQueryParameterMatch, RegionUrlMapPathMatcherRouteRuleMatchRuleQueryParameterMatchArgs

Name string: The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
ExactMatch string: The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
PresentMatch bool: Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
RegexMatch string: The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.

Name string: The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
ExactMatch string: The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
PresentMatch bool: Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
RegexMatch string: The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.

name String: The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
exactMatch String: The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
presentMatch Boolean: Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
regexMatch String: The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.

name string: The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
exactMatch string: The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
presentMatch boolean: Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
regexMatch string: The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.

name str: The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
exact_match str: The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
present_match bool: Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
regex_match str: The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.

name String: The name of the query parameter to match. The query parameter must exist in the request, in the absence of which the request match fails.
exactMatch String: The queryParameterMatch matches if the value of the parameter exactly matches the contents of exactMatch. Only one of presentMatch, exactMatch and regexMatch must be set.
presentMatch Boolean: Specifies that the queryParameterMatch matches if the request contains the query parameter, irrespective of whether the parameter has a value or not. Only one of presentMatch, exactMatch and regexMatch must be set.
regexMatch String: The queryParameterMatch matches if the value of the parameter matches the regular expression specified by regexMatch. For the regular expression grammar, please see en.cppreference.com/w/cpp/regex/ecmascript Only one of presentMatch, exactMatch and regexMatch must be set.

RegionUrlMapPathMatcherRouteRuleRouteAction, RegionUrlMapPathMatcherRouteRuleRouteActionArgs

CorsPolicy RegionUrlMapPathMatcherRouteRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
FaultInjectionPolicy RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
RequestMirrorPolicy RegionUrlMapPathMatcherRouteRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
RetryPolicy RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
Timeout RegionUrlMapPathMatcherRouteRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
UrlRewrite RegionUrlMapPathMatcherRouteRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
WeightedBackendServices List<RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendService>: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

CorsPolicy RegionUrlMapPathMatcherRouteRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
FaultInjectionPolicy RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
RequestMirrorPolicy RegionUrlMapPathMatcherRouteRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
RetryPolicy RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
Timeout RegionUrlMapPathMatcherRouteRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
UrlRewrite RegionUrlMapPathMatcherRouteRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
WeightedBackendServices []RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendService: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

corsPolicy RegionUrlMapPathMatcherRouteRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
faultInjectionPolicy RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
requestMirrorPolicy RegionUrlMapPathMatcherRouteRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
retryPolicy RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
timeout RegionUrlMapPathMatcherRouteRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
urlRewrite RegionUrlMapPathMatcherRouteRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
weightedBackendServices List<RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendService>: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

corsPolicy RegionUrlMapPathMatcherRouteRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
faultInjectionPolicy RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
requestMirrorPolicy RegionUrlMapPathMatcherRouteRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
retryPolicy RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
timeout RegionUrlMapPathMatcherRouteRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
urlRewrite RegionUrlMapPathMatcherRouteRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
weightedBackendServices RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendService[]: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

cors_policy RegionUrlMapPathMatcherRouteRuleRouteActionCorsPolicy: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
fault_injection_policy RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicy: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
request_mirror_policy RegionUrlMapPathMatcherRouteRuleRouteActionRequestMirrorPolicy: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
retry_policy RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicy: Specifies the retry policy associated with this route. Structure is documented below.
timeout RegionUrlMapPathMatcherRouteRuleRouteActionTimeout: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
url_rewrite RegionUrlMapPathMatcherRouteRuleRouteActionUrlRewrite: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
weighted_backend_services Sequence[RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendService]: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

corsPolicy Property Map: The specification for allowing client side cross-origin requests. Please see W3C Recommendation for Cross Origin Resource Sharing Structure is documented below.
faultInjectionPolicy Property Map: The specification for fault injection introduced into traffic to test the resiliency of clients to backend service failure. As part of fault injection, when clients send requests to a backend service, delays can be introduced by Loadbalancer on a percentage of requests before sending those request to the backend service. Similarly requests from clients can be aborted by the Loadbalancer for a percentage of requests. timeout and retry_policy will be ignored by clients that are configured with a fault_injection_policy. Structure is documented below.
requestMirrorPolicy Property Map: Specifies the policy on how requests intended for the route's backends are shadowed to a separate mirrored backend service. Loadbalancer does not wait for responses from the shadow service. Prior to sending traffic to the shadow service, the host / authority header is suffixed with -shadow. Structure is documented below.
retryPolicy Property Map: Specifies the retry policy associated with this route. Structure is documented below.
timeout Property Map: Specifies the timeout for the selected route. Timeout is computed from the time the request is has been fully processed (i.e. end-of-stream) up until the response has been completely processed. Timeout includes all retries. If not specified, the default value is 15 seconds. Structure is documented below.
urlRewrite Property Map: The spec to modify the URL of the request, prior to forwarding the request to the matched service Structure is documented below.
weightedBackendServices List<Property Map>: A list of weighted backend services to send traffic to when a route match occurs. The weights determine the fraction of traffic that flows to their corresponding backend service. If all traffic needs to go to a single backend service, there must be one weightedBackendService with weight set to a non 0 number. Once a backendService is identified and before forwarding the request to the backend service, advanced routing actions like Url rewrites and header transformations are applied depending on additional settings specified in this HttpRouteAction. Structure is documented below.

RegionUrlMapPathMatcherRouteRuleRouteActionCorsPolicy, RegionUrlMapPathMatcherRouteRuleRouteActionCorsPolicyArgs

AllowCredentials bool: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
AllowHeaders List<string>: Specifies the content for the Access-Control-Allow-Headers header.
AllowMethods List<string>: Specifies the content for the Access-Control-Allow-Methods header.
AllowOriginRegexes List<string>: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
AllowOrigins List<string>: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
Disabled bool: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
ExposeHeaders List<string>: Specifies the content for the Access-Control-Expose-Headers header.
MaxAge int: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

AllowCredentials bool: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
AllowHeaders []string: Specifies the content for the Access-Control-Allow-Headers header.
AllowMethods []string: Specifies the content for the Access-Control-Allow-Methods header.
AllowOriginRegexes []string: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
AllowOrigins []string: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
Disabled bool: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
ExposeHeaders []string: Specifies the content for the Access-Control-Expose-Headers header.
MaxAge int: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

allowCredentials Boolean: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
allowHeaders List<String>: Specifies the content for the Access-Control-Allow-Headers header.
allowMethods List<String>: Specifies the content for the Access-Control-Allow-Methods header.
allowOriginRegexes List<String>: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
allowOrigins List<String>: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
disabled Boolean: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
exposeHeaders List<String>: Specifies the content for the Access-Control-Expose-Headers header.
maxAge Integer: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

allowCredentials boolean: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
allowHeaders string[]: Specifies the content for the Access-Control-Allow-Headers header.
allowMethods string[]: Specifies the content for the Access-Control-Allow-Methods header.
allowOriginRegexes string[]: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
allowOrigins string[]: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
disabled boolean: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
exposeHeaders string[]: Specifies the content for the Access-Control-Expose-Headers header.
maxAge number: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

allow_credentials bool: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
allow_headers Sequence[str]: Specifies the content for the Access-Control-Allow-Headers header.
allow_methods Sequence[str]: Specifies the content for the Access-Control-Allow-Methods header.
allow_origin_regexes Sequence[str]: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
allow_origins Sequence[str]: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
disabled bool: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
expose_headers Sequence[str]: Specifies the content for the Access-Control-Expose-Headers header.
max_age int: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

allowCredentials Boolean: In response to a preflight request, setting this to true indicates that the actual request can include user credentials. This field translates to the Access-Control-Allow-Credentials header. Default is false.
allowHeaders List<String>: Specifies the content for the Access-Control-Allow-Headers header.
allowMethods List<String>: Specifies the content for the Access-Control-Allow-Methods header.
allowOriginRegexes List<String>: Specifies the regualar expression patterns that match allowed origins. For regular expression grammar please see en.cppreference.com/w/cpp/regex/ecmascript An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
allowOrigins List<String>: Specifies the list of origins that will be allowed to do CORS requests. An origin is allowed if it matches either an item in allowOrigins or an item in allowOriginRegexes.
disabled Boolean: If true, the setting specifies the CORS policy is disabled. The default value of false, which indicates that the CORS policy is in effect.
exposeHeaders List<String>: Specifies the content for the Access-Control-Expose-Headers header.
maxAge Number: Specifies how long results of a preflight request can be cached in seconds. This translates to the Access-Control-Max-Age header.

RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicy, RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyArgs

Abort RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
Delay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

Abort RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
Delay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

abort RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
delay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

abort RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
delay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

abort RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbort: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
delay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelay: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

abort Property Map: The specification for how client requests are aborted as part of fault injection. Structure is documented below.
delay Property Map: The specification for how client requests are delayed as part of fault injection, before being sent to a backend service. Structure is documented below.

RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbort, RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyAbortArgs

HttpStatus int: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
Percentage double: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

HttpStatus int: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
Percentage float64: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

httpStatus Integer: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
percentage Double: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

httpStatus number: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
percentage number: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

http_status int: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
percentage float: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

httpStatus Number: The HTTP status code used to abort the request. The value must be between 200 and 599 inclusive.
percentage Number: The percentage of traffic (connections/operations/requests) which will be aborted as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelay, RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayArgs

FixedDelay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
Percentage double: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

FixedDelay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
Percentage float64: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

fixedDelay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
percentage Double: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

fixedDelay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
percentage number: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

fixed_delay RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelay: Specifies the value of the fixed delay interval. Structure is documented below.
percentage float: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

fixedDelay Property Map: Specifies the value of the fixed delay interval. Structure is documented below.
percentage Number: The percentage of traffic (connections/operations/requests) on which delay will be introduced as part of fault injection. The value must be between 0.0 and 100.0 inclusive.

RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelay, RegionUrlMapPathMatcherRouteRuleRouteActionFaultInjectionPolicyDelayFixedDelayArgs

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Integer: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds str: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

RegionUrlMapPathMatcherRouteRuleRouteActionRequestMirrorPolicy, RegionUrlMapPathMatcherRouteRuleRouteActionRequestMirrorPolicyArgs

BackendService string: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

BackendService string: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

backendService String: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

backendService string: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

backend_service str: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

backendService String: The full or partial URL to the RegionBackendService resource being mirrored to. The backend service configured for a mirroring policy must reference backends that are of the same type as the original backend service matched in the URL map. Serverless NEG backends are not currently supported as a mirrored backend service.

RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicy, RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicyArgs

PerTryTimeout RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeout

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

RetryConditions List<string>

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

PerTryTimeout RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeout

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

RetryConditions []string

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

numRetries Integer

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

perTryTimeout RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeout

retryConditions List<String>

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

numRetries number

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

perTryTimeout RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeout

retryConditions string[]

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

num_retries int

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

per_try_timeout RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeout

retry_conditions Sequence[str]

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

numRetries Number

Specifies the allowed number retries. This number must be > 0. If not specified, defaults to 1.

perTryTimeout Property Map

retryConditions List<String>

5xx : retry is attempted if the instance or endpoint responds with any 5xx response code, or if the instance or endpoint does not respond at all. For example, disconnects, reset, read timeout, connection failure, and refused streams.
gateway-error : Similar to 5xx, but only applies to response codes 502, 503 or 504.
connect-failure : a retry is attempted on failures connecting to the instance or endpoint. For example, connection timeouts.
retriable-4xx : a retry is attempted if the instance or endpoint responds with a 4xx response code. The only error that you can retry is error code 409.
refused-stream : a retry is attempted if the instance or endpoint resets the stream with a REFUSED_STREAM error code. This reset type indicates that it is safe to retry.
cancelled : a retry is attempted if the gRPC status code in the response header is set to cancelled.
deadline-exceeded : a retry is attempted if the gRPC status code in the response header is set to deadline-exceeded.
internal : a retry is attempted if the gRPC status code in the response header is set to internal.
resource-exhausted : a retry is attempted if the gRPC status code in the response header is set to resource-exhausted.
unavailable : a retry is attempted if the gRPC status code in the response header is set to unavailable.

RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeout, RegionUrlMapPathMatcherRouteRuleRouteActionRetryPolicyPerTryTimeoutArgs

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Integer: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds str: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

RegionUrlMapPathMatcherRouteRuleRouteActionTimeout, RegionUrlMapPathMatcherRouteRuleRouteActionTimeoutArgs

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

Seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
Nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Integer: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds string: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds str: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos int: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

seconds String: Span of time at a resolution of a second. Must be from 0 to 315,576,000,000 inclusive. Note: these bounds are computed from: 60 sec/min * 60 min/hr * 24 hr/day * 365.25 days/year * 10000 years
nanos Number: Span of time that's a fraction of a second at nanosecond resolution. Durations less than one second are represented with a 0 seconds field and a positive nanos field. Must be from 0 to 999,999,999 inclusive.

RegionUrlMapPathMatcherRouteRuleRouteActionUrlRewrite, RegionUrlMapPathMatcherRouteRuleRouteActionUrlRewriteArgs

HostRewrite string: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
PathPrefixRewrite string: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.
PathTemplateRewrite string: Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.

HostRewrite string: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
PathPrefixRewrite string: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.
PathTemplateRewrite string: Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.

hostRewrite String: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
pathPrefixRewrite String: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.
pathTemplateRewrite String: Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.

hostRewrite string: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
pathPrefixRewrite string: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.
pathTemplateRewrite string: Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.

host_rewrite str: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
path_prefix_rewrite str: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.
path_template_rewrite str: Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.

hostRewrite String: Before forwarding the request to the selected service, the request's host header is replaced with contents of hostRewrite. The value must be from 1 to 255 characters.
pathPrefixRewrite String: Before forwarding the request to the selected backend service, the matching portion of the request's path is replaced by pathPrefixRewrite. The value must be from 1 to 1024 characters.
pathTemplateRewrite String: Prior to forwarding the request to the selected origin, if the request matched a pathTemplateMatch, the matching portion of the request's path is replaced re-written using the pattern specified by pathTemplateRewrite. pathTemplateRewrite must be between 1 and 255 characters (inclusive), must start with a '/', and must only use variables captured by the route's pathTemplate matchers. pathTemplateRewrite may only be used when all of a route's MatchRules specify pathTemplate. Only one of pathPrefixRewrite and pathTemplateRewrite may be specified.

RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendService, RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceArgs

BackendService string: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
Weight int: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
HeaderAction RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

BackendService string: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
Weight int: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
HeaderAction RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

backendService String: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
weight Integer: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
headerAction RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

backendService string: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
weight number: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
headerAction RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

backend_service str: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
weight int: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
header_action RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderAction: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

backendService String: The full or partial URL to the default BackendService resource. Before forwarding the request to backendService, the load balancer applies any relevant headerActions specified as part of this backendServiceWeight.
weight Number: Specifies the fraction of traffic sent to a backend service, computed as weight / (sum of all weightedBackendService weights in routeAction) . The selection of a backend service is determined only for new traffic. Once a user's request has been directed to a backend service, subsequent requests are sent to the same backend service as determined by the backend service's session affinity policy. The value must be from 0 to 1000.
headerAction Property Map: Specifies changes to request and response headers that need to take effect for the selected backendService. headerAction specified here take effect before headerAction in the enclosing HttpRouteRule, PathMatcher and UrlMap. headerAction is not supported for load balancers that have their loadBalancingScheme set to EXTERNAL. Not supported when the URL map is bound to a target gRPC proxy that has validateForProxyless field set to true. Structure is documented below.

RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderAction, RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionArgs

RequestHeadersToAdds List<RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
RequestHeadersToRemoves List<string>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
ResponseHeadersToAdds List<RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd>: Headers to add the response before sending the response back to the client. Structure is documented below.
ResponseHeadersToRemoves List<string>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

RequestHeadersToAdds []RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
RequestHeadersToRemoves []string: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
ResponseHeadersToAdds []RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd: Headers to add the response before sending the response back to the client. Structure is documented below.
ResponseHeadersToRemoves []string: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds List<RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds List<RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd>: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd[]: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves string[]: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd[]: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves string[]: A list of header names for headers that need to be removed from the response before sending the response back to the client.

request_headers_to_adds Sequence[RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd]: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
request_headers_to_removes Sequence[str]: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
response_headers_to_adds Sequence[RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd]: Headers to add the response before sending the response back to the client. Structure is documented below.
response_headers_to_removes Sequence[str]: A list of header names for headers that need to be removed from the response before sending the response back to the client.

requestHeadersToAdds List<Property Map>: Headers to add to a matching request before forwarding the request to the backendService. Structure is documented below.
requestHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the request before forwarding the request to the backendService.
responseHeadersToAdds List<Property Map>: Headers to add the response before sending the response back to the client. Structure is documented below.
responseHeadersToRemoves List<String>: A list of header names for headers that need to be removed from the response before sending the response back to the client.

RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAdd, RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionRequestHeadersToAddArgs

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName string: The name of the header.
headerValue string: The value of the header to add.
replace boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

header_name str: The name of the header.
header_value str: The value of the header to add.
replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAdd, RegionUrlMapPathMatcherRouteRuleRouteActionWeightedBackendServiceHeaderActionResponseHeadersToAddArgs

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

HeaderName string: The name of the header.
HeaderValue string: The value of the header to add.
Replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName string: The name of the header.
headerValue string: The value of the header to add.
replace boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

header_name str: The name of the header.
header_value str: The value of the header to add.
replace bool: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

headerName String: The name of the header.
headerValue String: The value of the header to add.
replace Boolean: If false, headerValue is appended to any values that already exist for the header. If true, headerValue is set for the header, discarding any values that were set for that header. The default value is false.

RegionUrlMapPathMatcherRouteRuleUrlRedirect, RegionUrlMapPathMatcherRouteRuleUrlRedirectArgs

HostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

PathRedirect string

PrefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

StripQuery bool

HostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

PathRedirect string

PrefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

StripQuery bool

hostRedirect String

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect Boolean

pathRedirect String

prefixRedirect String

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery Boolean

hostRedirect string

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect boolean

pathRedirect string

prefixRedirect string

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

stripQuery boolean

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

The HTTP Status code to use for this RedirectAction. Supported values are:

MOVED_PERMANENTLY_DEFAULT, which is the default value and corresponds to 301.
FOUND, which corresponds to 302.
SEE_OTHER which corresponds to 303.
TEMPORARY_REDIRECT, which corresponds to 307. In this case, the request method will be retained.
PERMANENT_REDIRECT, which corresponds to 308. In this case, the request method will be retained.

strip_query bool

hostRedirect String

The host that will be used in the redirect response instead of the one that was supplied in the request. The value must be between 1 and 255 characters.

httpsRedirect Boolean

pathRedirect String

prefixRedirect String