Docs Home Pulumi IaC Pulumi ESC Pulumi Cloud Packages Tutorials
  1. Packages
  2. Fortios
  3. API Docs
  4. vpn
  5. vpn/ipsec
  6. Phase2interface
Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse
pulumiverse/pulumi-fortios

fortios.vpn/ipsec.Phase2interface

Explore with Pulumi AI

fortios logo
Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse
pulumiverse/pulumi-fortios

    Configure VPN autokey tunnel.

    Example Usage

    import * as pulumi from "@pulumi/pulumi";
import * as fortios from "@pulumiverse/fortios";

const trname3 = new fortios.vpn.ipsec.Phase1interface("trname3", {
    acctVerify: "disable",
    addGwRoute: "disable",
    addRoute: "enable",
    assignIp: "enable",
    assignIpFrom: "range",
    authmethod: "psk",
    autoDiscoveryForwarder: "disable",
    autoDiscoveryPsk: "disable",
    autoDiscoveryReceiver: "disable",
    autoDiscoverySender: "disable",
    autoNegotiate: "enable",
    certIdValidation: "enable",
    childlessIke: "disable",
    clientAutoNegotiate: "disable",
    clientKeepAlive: "disable",
    defaultGw: "0.0.0.0",
    defaultGwPriority: 0,
    dhgrp: "14 5",
    digitalSignatureAuth: "disable",
    distance: 15,
    dnsMode: "manual",
    dpd: "on-demand",
    dpdRetrycount: 3,
    dpdRetryinterval: "20",
    eap: "disable",
    eapIdentity: "use-id-payload",
    encapLocalGw4: "0.0.0.0",
    encapLocalGw6: "::",
    encapRemoteGw4: "0.0.0.0",
    encapRemoteGw6: "::",
    encapsulation: "none",
    encapsulationAddress: "ike",
    enforceUniqueId: "disable",
    exchangeInterfaceIp: "disable",
    exchangeIpAddr4: "0.0.0.0",
    exchangeIpAddr6: "::",
    forticlientEnforcement: "disable",
    fragmentation: "enable",
    fragmentationMtu: 1200,
    groupAuthentication: "disable",
    haSyncEspSeqno: "enable",
    idleTimeout: "disable",
    idleTimeoutinterval: 15,
    ikeVersion: "1",
    includeLocalLan: "disable",
    "interface": "port3",
    ipVersion: "4",
    ipv4DnsServer1: "0.0.0.0",
    ipv4DnsServer2: "0.0.0.0",
    ipv4DnsServer3: "0.0.0.0",
    ipv4EndIp: "0.0.0.0",
    ipv4Netmask: "255.255.255.255",
    ipv4StartIp: "0.0.0.0",
    ipv4WinsServer1: "0.0.0.0",
    ipv4WinsServer2: "0.0.0.0",
    ipv6DnsServer1: "::",
    ipv6DnsServer2: "::",
    ipv6DnsServer3: "::",
    ipv6EndIp: "::",
    ipv6Prefix: 128,
    ipv6StartIp: "::",
    keepalive: 10,
    keylife: 86400,
    localGw: "0.0.0.0",
    localGw6: "::",
    localidType: "auto",
    meshSelectorType: "disable",
    mode: "main",
    modeCfg: "disable",
    monitorHoldDownDelay: 0,
    monitorHoldDownTime: "00:00",
    monitorHoldDownType: "immediate",
    monitorHoldDownWeekday: "sunday",
    nattraversal: "enable",
    negotiateTimeout: 30,
    netDevice: "disable",
    passiveMode: "disable",
    peertype: "any",
    ppk: "disable",
    priority: 0,
    proposal: "aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1",
    psksecret: "eweeeeeeeecee",
    reauth: "disable",
    rekey: "enable",
    remoteGw: "2.22.2.2",
    remoteGw6: "::",
    rsaSignatureFormat: "pkcs1",
    savePassword: "disable",
    sendCertChain: "enable",
    signatureHashAlg: "sha2-512 sha2-384 sha2-256 sha1",
    suiteB: "disable",
    tunnelSearch: "selectors",
    type: "static",
    unitySupport: "enable",
    wizardType: "custom",
    xauthtype: "disable",
});
const trname2 = new fortios.vpn.ipsec.Phase2interface("trname2", {
    addRoute: "phase1",
    autoDiscoveryForwarder: "phase1",
    autoDiscoverySender: "phase1",
    autoNegotiate: "disable",
    dhcpIpsec: "disable",
    dhgrp: "14 5",
    dstAddrType: "subnet",
    dstEndIp6: "::",
    dstPort: 0,
    dstSubnet: "0.0.0.0 0.0.0.0",
    encapsulation: "tunnel-mode",
    keepalive: "disable",
    keylifeType: "seconds",
    keylifekbs: 5120,
    keylifeseconds: 43200,
    l2tp: "disable",
    pfs: "enable",
    phase1name: trname3.name,
    proposal: "aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305",
    protocol: 0,
    replay: "enable",
    routeOverlap: "use-new",
    singleSource: "disable",
    srcAddrType: "subnet",
    srcEndIp6: "::",
    srcPort: 0,
    srcSubnet: "0.0.0.0 0.0.0.0",
});

    import pulumi
import pulumiverse_fortios as fortios

trname3 = fortios.vpn.ipsec.Phase1interface("trname3",
    acct_verify="disable",
    add_gw_route="disable",
    add_route="enable",
    assign_ip="enable",
    assign_ip_from="range",
    authmethod="psk",
    auto_discovery_forwarder="disable",
    auto_discovery_psk="disable",
    auto_discovery_receiver="disable",
    auto_discovery_sender="disable",
    auto_negotiate="enable",
    cert_id_validation="enable",
    childless_ike="disable",
    client_auto_negotiate="disable",
    client_keep_alive="disable",
    default_gw="0.0.0.0",
    default_gw_priority=0,
    dhgrp="14 5",
    digital_signature_auth="disable",
    distance=15,
    dns_mode="manual",
    dpd="on-demand",
    dpd_retrycount=3,
    dpd_retryinterval="20",
    eap="disable",
    eap_identity="use-id-payload",
    encap_local_gw4="0.0.0.0",
    encap_local_gw6="::",
    encap_remote_gw4="0.0.0.0",
    encap_remote_gw6="::",
    encapsulation="none",
    encapsulation_address="ike",
    enforce_unique_id="disable",
    exchange_interface_ip="disable",
    exchange_ip_addr4="0.0.0.0",
    exchange_ip_addr6="::",
    forticlient_enforcement="disable",
    fragmentation="enable",
    fragmentation_mtu=1200,
    group_authentication="disable",
    ha_sync_esp_seqno="enable",
    idle_timeout="disable",
    idle_timeoutinterval=15,
    ike_version="1",
    include_local_lan="disable",
    interface="port3",
    ip_version="4",
    ipv4_dns_server1="0.0.0.0",
    ipv4_dns_server2="0.0.0.0",
    ipv4_dns_server3="0.0.0.0",
    ipv4_end_ip="0.0.0.0",
    ipv4_netmask="255.255.255.255",
    ipv4_start_ip="0.0.0.0",
    ipv4_wins_server1="0.0.0.0",
    ipv4_wins_server2="0.0.0.0",
    ipv6_dns_server1="::",
    ipv6_dns_server2="::",
    ipv6_dns_server3="::",
    ipv6_end_ip="::",
    ipv6_prefix=128,
    ipv6_start_ip="::",
    keepalive=10,
    keylife=86400,
    local_gw="0.0.0.0",
    local_gw6="::",
    localid_type="auto",
    mesh_selector_type="disable",
    mode="main",
    mode_cfg="disable",
    monitor_hold_down_delay=0,
    monitor_hold_down_time="00:00",
    monitor_hold_down_type="immediate",
    monitor_hold_down_weekday="sunday",
    nattraversal="enable",
    negotiate_timeout=30,
    net_device="disable",
    passive_mode="disable",
    peertype="any",
    ppk="disable",
    priority=0,
    proposal="aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1",
    psksecret="eweeeeeeeecee",
    reauth="disable",
    rekey="enable",
    remote_gw="2.22.2.2",
    remote_gw6="::",
    rsa_signature_format="pkcs1",
    save_password="disable",
    send_cert_chain="enable",
    signature_hash_alg="sha2-512 sha2-384 sha2-256 sha1",
    suite_b="disable",
    tunnel_search="selectors",
    type="static",
    unity_support="enable",
    wizard_type="custom",
    xauthtype="disable")
trname2 = fortios.vpn.ipsec.Phase2interface("trname2",
    add_route="phase1",
    auto_discovery_forwarder="phase1",
    auto_discovery_sender="phase1",
    auto_negotiate="disable",
    dhcp_ipsec="disable",
    dhgrp="14 5",
    dst_addr_type="subnet",
    dst_end_ip6="::",
    dst_port=0,
    dst_subnet="0.0.0.0 0.0.0.0",
    encapsulation="tunnel-mode",
    keepalive="disable",
    keylife_type="seconds",
    keylifekbs=5120,
    keylifeseconds=43200,
    l2tp="disable",
    pfs="enable",
    phase1name=trname3.name,
    proposal="aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305",
    protocol=0,
    replay="enable",
    route_overlap="use-new",
    single_source="disable",
    src_addr_type="subnet",
    src_end_ip6="::",
    src_port=0,
    src_subnet="0.0.0.0 0.0.0.0")

    package main

import (
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
	"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/vpn"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		trname3, err := vpn.NewPhase1interface(ctx, "trname3", &vpn.Phase1interfaceArgs{
			AcctVerify:             pulumi.String("disable"),
			AddGwRoute:             pulumi.String("disable"),
			AddRoute:               pulumi.String("enable"),
			AssignIp:               pulumi.String("enable"),
			AssignIpFrom:           pulumi.String("range"),
			Authmethod:             pulumi.String("psk"),
			AutoDiscoveryForwarder: pulumi.String("disable"),
			AutoDiscoveryPsk:       pulumi.String("disable"),
			AutoDiscoveryReceiver:  pulumi.String("disable"),
			AutoDiscoverySender:    pulumi.String("disable"),
			AutoNegotiate:          pulumi.String("enable"),
			CertIdValidation:       pulumi.String("enable"),
			ChildlessIke:           pulumi.String("disable"),
			ClientAutoNegotiate:    pulumi.String("disable"),
			ClientKeepAlive:        pulumi.String("disable"),
			DefaultGw:              pulumi.String("0.0.0.0"),
			DefaultGwPriority:      pulumi.Int(0),
			Dhgrp:                  pulumi.String("14 5"),
			DigitalSignatureAuth:   pulumi.String("disable"),
			Distance:               pulumi.Int(15),
			DnsMode:                pulumi.String("manual"),
			Dpd:                    pulumi.String("on-demand"),
			DpdRetrycount:          pulumi.Int(3),
			DpdRetryinterval:       pulumi.String("20"),
			Eap:                    pulumi.String("disable"),
			EapIdentity:            pulumi.String("use-id-payload"),
			EncapLocalGw4:          pulumi.String("0.0.0.0"),
			EncapLocalGw6:          pulumi.String("::"),
			EncapRemoteGw4:         pulumi.String("0.0.0.0"),
			EncapRemoteGw6:         pulumi.String("::"),
			Encapsulation:          pulumi.String("none"),
			EncapsulationAddress:   pulumi.String("ike"),
			EnforceUniqueId:        pulumi.String("disable"),
			ExchangeInterfaceIp:    pulumi.String("disable"),
			ExchangeIpAddr4:        pulumi.String("0.0.0.0"),
			ExchangeIpAddr6:        pulumi.String("::"),
			ForticlientEnforcement: pulumi.String("disable"),
			Fragmentation:          pulumi.String("enable"),
			FragmentationMtu:       pulumi.Int(1200),
			GroupAuthentication:    pulumi.String("disable"),
			HaSyncEspSeqno:         pulumi.String("enable"),
			IdleTimeout:            pulumi.String("disable"),
			IdleTimeoutinterval:    pulumi.Int(15),
			IkeVersion:             pulumi.String("1"),
			IncludeLocalLan:        pulumi.String("disable"),
			Interface:              pulumi.String("port3"),
			IpVersion:              pulumi.String("4"),
			Ipv4DnsServer1:         pulumi.String("0.0.0.0"),
			Ipv4DnsServer2:         pulumi.String("0.0.0.0"),
			Ipv4DnsServer3:         pulumi.String("0.0.0.0"),
			Ipv4EndIp:              pulumi.String("0.0.0.0"),
			Ipv4Netmask:            pulumi.String("255.255.255.255"),
			Ipv4StartIp:            pulumi.String("0.0.0.0"),
			Ipv4WinsServer1:        pulumi.String("0.0.0.0"),
			Ipv4WinsServer2:        pulumi.String("0.0.0.0"),
			Ipv6DnsServer1:         pulumi.String("::"),
			Ipv6DnsServer2:         pulumi.String("::"),
			Ipv6DnsServer3:         pulumi.String("::"),
			Ipv6EndIp:              pulumi.String("::"),
			Ipv6Prefix:             pulumi.Int(128),
			Ipv6StartIp:            pulumi.String("::"),
			Keepalive:              pulumi.Int(10),
			Keylife:                pulumi.Int(86400),
			LocalGw:                pulumi.String("0.0.0.0"),
			LocalGw6:               pulumi.String("::"),
			LocalidType:            pulumi.String("auto"),
			MeshSelectorType:       pulumi.String("disable"),
			Mode:                   pulumi.String("main"),
			ModeCfg:                pulumi.String("disable"),
			MonitorHoldDownDelay:   pulumi.Int(0),
			MonitorHoldDownTime:    pulumi.String("00:00"),
			MonitorHoldDownType:    pulumi.String("immediate"),
			MonitorHoldDownWeekday: pulumi.String("sunday"),
			Nattraversal:           pulumi.String("enable"),
			NegotiateTimeout:       pulumi.Int(30),
			NetDevice:              pulumi.String("disable"),
			PassiveMode:            pulumi.String("disable"),
			Peertype:               pulumi.String("any"),
			Ppk:                    pulumi.String("disable"),
			Priority:               pulumi.Int(0),
			Proposal:               pulumi.String("aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1"),
			Psksecret:              pulumi.String("eweeeeeeeecee"),
			Reauth:                 pulumi.String("disable"),
			Rekey:                  pulumi.String("enable"),
			RemoteGw:               pulumi.String("2.22.2.2"),
			RemoteGw6:              pulumi.String("::"),
			RsaSignatureFormat:     pulumi.String("pkcs1"),
			SavePassword:           pulumi.String("disable"),
			SendCertChain:          pulumi.String("enable"),
			SignatureHashAlg:       pulumi.String("sha2-512 sha2-384 sha2-256 sha1"),
			SuiteB:                 pulumi.String("disable"),
			TunnelSearch:           pulumi.String("selectors"),
			Type:                   pulumi.String("static"),
			UnitySupport:           pulumi.String("enable"),
			WizardType:             pulumi.String("custom"),
			Xauthtype:              pulumi.String("disable"),
		})
		if err != nil {
			return err
		}
		_, err = vpn.NewPhase2interface(ctx, "trname2", &vpn.Phase2interfaceArgs{
			AddRoute:               pulumi.String("phase1"),
			AutoDiscoveryForwarder: pulumi.String("phase1"),
			AutoDiscoverySender:    pulumi.String("phase1"),
			AutoNegotiate:          pulumi.String("disable"),
			DhcpIpsec:              pulumi.String("disable"),
			Dhgrp:                  pulumi.String("14 5"),
			DstAddrType:            pulumi.String("subnet"),
			DstEndIp6:              pulumi.String("::"),
			DstPort:                pulumi.Int(0),
			DstSubnet:              pulumi.String("0.0.0.0 0.0.0.0"),
			Encapsulation:          pulumi.String("tunnel-mode"),
			Keepalive:              pulumi.String("disable"),
			KeylifeType:            pulumi.String("seconds"),
			Keylifekbs:             pulumi.Int(5120),
			Keylifeseconds:         pulumi.Int(43200),
			L2tp:                   pulumi.String("disable"),
			Pfs:                    pulumi.String("enable"),
			Phase1name:             trname3.Name,
			Proposal:               pulumi.String("aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305"),
			Protocol:               pulumi.Int(0),
			Replay:                 pulumi.String("enable"),
			RouteOverlap:           pulumi.String("use-new"),
			SingleSource:           pulumi.String("disable"),
			SrcAddrType:            pulumi.String("subnet"),
			SrcEndIp6:              pulumi.String("::"),
			SrcPort:                pulumi.Int(0),
			SrcSubnet:              pulumi.String("0.0.0.0 0.0.0.0"),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

    using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Fortios = Pulumiverse.Fortios;

return await Deployment.RunAsync(() => 
{
    var trname3 = new Fortios.Vpn.Ipsec.Phase1interface("trname3", new()
    {
        AcctVerify = "disable",
        AddGwRoute = "disable",
        AddRoute = "enable",
        AssignIp = "enable",
        AssignIpFrom = "range",
        Authmethod = "psk",
        AutoDiscoveryForwarder = "disable",
        AutoDiscoveryPsk = "disable",
        AutoDiscoveryReceiver = "disable",
        AutoDiscoverySender = "disable",
        AutoNegotiate = "enable",
        CertIdValidation = "enable",
        ChildlessIke = "disable",
        ClientAutoNegotiate = "disable",
        ClientKeepAlive = "disable",
        DefaultGw = "0.0.0.0",
        DefaultGwPriority = 0,
        Dhgrp = "14 5",
        DigitalSignatureAuth = "disable",
        Distance = 15,
        DnsMode = "manual",
        Dpd = "on-demand",
        DpdRetrycount = 3,
        DpdRetryinterval = "20",
        Eap = "disable",
        EapIdentity = "use-id-payload",
        EncapLocalGw4 = "0.0.0.0",
        EncapLocalGw6 = "::",
        EncapRemoteGw4 = "0.0.0.0",
        EncapRemoteGw6 = "::",
        Encapsulation = "none",
        EncapsulationAddress = "ike",
        EnforceUniqueId = "disable",
        ExchangeInterfaceIp = "disable",
        ExchangeIpAddr4 = "0.0.0.0",
        ExchangeIpAddr6 = "::",
        ForticlientEnforcement = "disable",
        Fragmentation = "enable",
        FragmentationMtu = 1200,
        GroupAuthentication = "disable",
        HaSyncEspSeqno = "enable",
        IdleTimeout = "disable",
        IdleTimeoutinterval = 15,
        IkeVersion = "1",
        IncludeLocalLan = "disable",
        Interface = "port3",
        IpVersion = "4",
        Ipv4DnsServer1 = "0.0.0.0",
        Ipv4DnsServer2 = "0.0.0.0",
        Ipv4DnsServer3 = "0.0.0.0",
        Ipv4EndIp = "0.0.0.0",
        Ipv4Netmask = "255.255.255.255",
        Ipv4StartIp = "0.0.0.0",
        Ipv4WinsServer1 = "0.0.0.0",
        Ipv4WinsServer2 = "0.0.0.0",
        Ipv6DnsServer1 = "::",
        Ipv6DnsServer2 = "::",
        Ipv6DnsServer3 = "::",
        Ipv6EndIp = "::",
        Ipv6Prefix = 128,
        Ipv6StartIp = "::",
        Keepalive = 10,
        Keylife = 86400,
        LocalGw = "0.0.0.0",
        LocalGw6 = "::",
        LocalidType = "auto",
        MeshSelectorType = "disable",
        Mode = "main",
        ModeCfg = "disable",
        MonitorHoldDownDelay = 0,
        MonitorHoldDownTime = "00:00",
        MonitorHoldDownType = "immediate",
        MonitorHoldDownWeekday = "sunday",
        Nattraversal = "enable",
        NegotiateTimeout = 30,
        NetDevice = "disable",
        PassiveMode = "disable",
        Peertype = "any",
        Ppk = "disable",
        Priority = 0,
        Proposal = "aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1",
        Psksecret = "eweeeeeeeecee",
        Reauth = "disable",
        Rekey = "enable",
        RemoteGw = "2.22.2.2",
        RemoteGw6 = "::",
        RsaSignatureFormat = "pkcs1",
        SavePassword = "disable",
        SendCertChain = "enable",
        SignatureHashAlg = "sha2-512 sha2-384 sha2-256 sha1",
        SuiteB = "disable",
        TunnelSearch = "selectors",
        Type = "static",
        UnitySupport = "enable",
        WizardType = "custom",
        Xauthtype = "disable",
    });

    var trname2 = new Fortios.Vpn.Ipsec.Phase2interface("trname2", new()
    {
        AddRoute = "phase1",
        AutoDiscoveryForwarder = "phase1",
        AutoDiscoverySender = "phase1",
        AutoNegotiate = "disable",
        DhcpIpsec = "disable",
        Dhgrp = "14 5",
        DstAddrType = "subnet",
        DstEndIp6 = "::",
        DstPort = 0,
        DstSubnet = "0.0.0.0 0.0.0.0",
        Encapsulation = "tunnel-mode",
        Keepalive = "disable",
        KeylifeType = "seconds",
        Keylifekbs = 5120,
        Keylifeseconds = 43200,
        L2tp = "disable",
        Pfs = "enable",
        Phase1name = trname3.Name,
        Proposal = "aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305",
        Protocol = 0,
        Replay = "enable",
        RouteOverlap = "use-new",
        SingleSource = "disable",
        SrcAddrType = "subnet",
        SrcEndIp6 = "::",
        SrcPort = 0,
        SrcSubnet = "0.0.0.0 0.0.0.0",
    });

});

    package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.fortios.vpn.Phase1interface;
import com.pulumi.fortios.vpn.Phase1interfaceArgs;
import com.pulumi.fortios.vpn.Phase2interface;
import com.pulumi.fortios.vpn.Phase2interfaceArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
        var trname3 = new Phase1interface("trname3", Phase1interfaceArgs.builder()
            .acctVerify("disable")
            .addGwRoute("disable")
            .addRoute("enable")
            .assignIp("enable")
            .assignIpFrom("range")
            .authmethod("psk")
            .autoDiscoveryForwarder("disable")
            .autoDiscoveryPsk("disable")
            .autoDiscoveryReceiver("disable")
            .autoDiscoverySender("disable")
            .autoNegotiate("enable")
            .certIdValidation("enable")
            .childlessIke("disable")
            .clientAutoNegotiate("disable")
            .clientKeepAlive("disable")
            .defaultGw("0.0.0.0")
            .defaultGwPriority(0)
            .dhgrp("14 5")
            .digitalSignatureAuth("disable")
            .distance(15)
            .dnsMode("manual")
            .dpd("on-demand")
            .dpdRetrycount(3)
            .dpdRetryinterval("20")
            .eap("disable")
            .eapIdentity("use-id-payload")
            .encapLocalGw4("0.0.0.0")
            .encapLocalGw6("::")
            .encapRemoteGw4("0.0.0.0")
            .encapRemoteGw6("::")
            .encapsulation("none")
            .encapsulationAddress("ike")
            .enforceUniqueId("disable")
            .exchangeInterfaceIp("disable")
            .exchangeIpAddr4("0.0.0.0")
            .exchangeIpAddr6("::")
            .forticlientEnforcement("disable")
            .fragmentation("enable")
            .fragmentationMtu(1200)
            .groupAuthentication("disable")
            .haSyncEspSeqno("enable")
            .idleTimeout("disable")
            .idleTimeoutinterval(15)
            .ikeVersion("1")
            .includeLocalLan("disable")
            .interface_("port3")
            .ipVersion("4")
            .ipv4DnsServer1("0.0.0.0")
            .ipv4DnsServer2("0.0.0.0")
            .ipv4DnsServer3("0.0.0.0")
            .ipv4EndIp("0.0.0.0")
            .ipv4Netmask("255.255.255.255")
            .ipv4StartIp("0.0.0.0")
            .ipv4WinsServer1("0.0.0.0")
            .ipv4WinsServer2("0.0.0.0")
            .ipv6DnsServer1("::")
            .ipv6DnsServer2("::")
            .ipv6DnsServer3("::")
            .ipv6EndIp("::")
            .ipv6Prefix(128)
            .ipv6StartIp("::")
            .keepalive(10)
            .keylife(86400)
            .localGw("0.0.0.0")
            .localGw6("::")
            .localidType("auto")
            .meshSelectorType("disable")
            .mode("main")
            .modeCfg("disable")
            .monitorHoldDownDelay(0)
            .monitorHoldDownTime("00:00")
            .monitorHoldDownType("immediate")
            .monitorHoldDownWeekday("sunday")
            .nattraversal("enable")
            .negotiateTimeout(30)
            .netDevice("disable")
            .passiveMode("disable")
            .peertype("any")
            .ppk("disable")
            .priority(0)
            .proposal("aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1")
            .psksecret("eweeeeeeeecee")
            .reauth("disable")
            .rekey("enable")
            .remoteGw("2.22.2.2")
            .remoteGw6("::")
            .rsaSignatureFormat("pkcs1")
            .savePassword("disable")
            .sendCertChain("enable")
            .signatureHashAlg("sha2-512 sha2-384 sha2-256 sha1")
            .suiteB("disable")
            .tunnelSearch("selectors")
            .type("static")
            .unitySupport("enable")
            .wizardType("custom")
            .xauthtype("disable")
            .build());

        var trname2 = new Phase2interface("trname2", Phase2interfaceArgs.builder()
            .addRoute("phase1")
            .autoDiscoveryForwarder("phase1")
            .autoDiscoverySender("phase1")
            .autoNegotiate("disable")
            .dhcpIpsec("disable")
            .dhgrp("14 5")
            .dstAddrType("subnet")
            .dstEndIp6("::")
            .dstPort(0)
            .dstSubnet("0.0.0.0 0.0.0.0")
            .encapsulation("tunnel-mode")
            .keepalive("disable")
            .keylifeType("seconds")
            .keylifekbs(5120)
            .keylifeseconds(43200)
            .l2tp("disable")
            .pfs("enable")
            .phase1name(trname3.name())
            .proposal("aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305")
            .protocol(0)
            .replay("enable")
            .routeOverlap("use-new")
            .singleSource("disable")
            .srcAddrType("subnet")
            .srcEndIp6("::")
            .srcPort(0)
            .srcSubnet("0.0.0.0 0.0.0.0")
            .build());

    }
}

    resources:
  trname3:
    type: fortios:vpn/ipsec:Phase1interface
    properties:
      acctVerify: disable
      addGwRoute: disable
      addRoute: enable
      assignIp: enable
      assignIpFrom: range
      authmethod: psk
      autoDiscoveryForwarder: disable
      autoDiscoveryPsk: disable
      autoDiscoveryReceiver: disable
      autoDiscoverySender: disable
      autoNegotiate: enable
      certIdValidation: enable
      childlessIke: disable
      clientAutoNegotiate: disable
      clientKeepAlive: disable
      defaultGw: 0.0.0.0
      defaultGwPriority: 0
      dhgrp: 14 5
      digitalSignatureAuth: disable
      distance: 15
      dnsMode: manual
      dpd: on-demand
      dpdRetrycount: 3
      dpdRetryinterval: '20'
      eap: disable
      eapIdentity: use-id-payload
      encapLocalGw4: 0.0.0.0
      encapLocalGw6: '::'
      encapRemoteGw4: 0.0.0.0
      encapRemoteGw6: '::'
      encapsulation: none
      encapsulationAddress: ike
      enforceUniqueId: disable
      exchangeInterfaceIp: disable
      exchangeIpAddr4: 0.0.0.0
      exchangeIpAddr6: '::'
      forticlientEnforcement: disable
      fragmentation: enable
      fragmentationMtu: 1200
      groupAuthentication: disable
      haSyncEspSeqno: enable
      idleTimeout: disable
      idleTimeoutinterval: 15
      ikeVersion: '1'
      includeLocalLan: disable
      interface: port3
      ipVersion: '4'
      ipv4DnsServer1: 0.0.0.0
      ipv4DnsServer2: 0.0.0.0
      ipv4DnsServer3: 0.0.0.0
      ipv4EndIp: 0.0.0.0
      ipv4Netmask: 255.255.255.255
      ipv4StartIp: 0.0.0.0
      ipv4WinsServer1: 0.0.0.0
      ipv4WinsServer2: 0.0.0.0
      ipv6DnsServer1: '::'
      ipv6DnsServer2: '::'
      ipv6DnsServer3: '::'
      ipv6EndIp: '::'
      ipv6Prefix: 128
      ipv6StartIp: '::'
      keepalive: 10
      keylife: 86400
      localGw: 0.0.0.0
      localGw6: '::'
      localidType: auto
      meshSelectorType: disable
      mode: main
      modeCfg: disable
      monitorHoldDownDelay: 0
      monitorHoldDownTime: 00:00
      monitorHoldDownType: immediate
      monitorHoldDownWeekday: sunday
      nattraversal: enable
      negotiateTimeout: 30
      netDevice: disable
      passiveMode: disable
      peertype: any
      ppk: disable
      priority: 0
      proposal: aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
      psksecret: eweeeeeeeecee
      reauth: disable
      rekey: enable
      remoteGw: 2.22.2.2
      remoteGw6: '::'
      rsaSignatureFormat: pkcs1
      savePassword: disable
      sendCertChain: enable
      signatureHashAlg: sha2-512 sha2-384 sha2-256 sha1
      suiteB: disable
      tunnelSearch: selectors
      type: static
      unitySupport: enable
      wizardType: custom
      xauthtype: disable
  trname2:
    type: fortios:vpn/ipsec:Phase2interface
    properties:
      addRoute: phase1
      autoDiscoveryForwarder: phase1
      autoDiscoverySender: phase1
      autoNegotiate: disable
      dhcpIpsec: disable
      dhgrp: 14 5
      dstAddrType: subnet
      dstEndIp6: '::'
      dstPort: 0
      dstSubnet: 0.0.0.0 0.0.0.0
      encapsulation: tunnel-mode
      keepalive: disable
      keylifeType: seconds
      keylifekbs: 5120
      keylifeseconds: 43200
      l2tp: disable
      pfs: enable
      phase1name: ${trname3.name}
      proposal: aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305
      protocol: 0
      replay: enable
      routeOverlap: use-new
      singleSource: disable
      srcAddrType: subnet
      srcEndIp6: '::'
      srcPort: 0
      srcSubnet: 0.0.0.0 0.0.0.0

    Create Phase2interface Resource

    Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

    Constructor syntax

    new Phase2interface(name: string, args: Phase2interfaceArgs, opts?: CustomResourceOptions);
    @overload
def Phase2interface(resource_name: str,
                    args: Phase2interfaceArgs,
                    opts: Optional[ResourceOptions] = None)

@overload
def Phase2interface(resource_name: str,
                    opts: Optional[ResourceOptions] = None,
                    phase1name: Optional[str] = None,
                    proposal: Optional[str] = None,
                    ipv4_df: Optional[str] = None,
                    src_subnet6: Optional[str] = None,
                    comments: Optional[str] = None,
                    keylife_type: Optional[str] = None,
                    dhgrp: Optional[str] = None,
                    diffserv: Optional[str] = None,
                    diffservcode: Optional[str] = None,
                    dst_addr_type: Optional[str] = None,
                    dst_end_ip: Optional[str] = None,
                    dst_end_ip6: Optional[str] = None,
                    dst_name: Optional[str] = None,
                    dst_name6: Optional[str] = None,
                    dst_port: Optional[int] = None,
                    dst_start_ip: Optional[str] = None,
                    dst_start_ip6: Optional[str] = None,
                    dst_subnet: Optional[str] = None,
                    dst_subnet6: Optional[str] = None,
                    keylifeseconds: Optional[int] = None,
                    inbound_dscp_copy: Optional[str] = None,
                    initiator_ts_narrow: Optional[str] = None,
                    add_route: Optional[str] = None,
                    keepalive: Optional[str] = None,
                    dhcp_ipsec: Optional[str] = None,
                    auto_negotiate: Optional[str] = None,
                    encapsulation: Optional[str] = None,
                    l2tp: Optional[str] = None,
                    name: Optional[str] = None,
                    pfs: Optional[str] = None,
                    auto_discovery_sender: Optional[str] = None,
                    auto_discovery_forwarder: Optional[str] = None,
                    protocol: Optional[int] = None,
                    replay: Optional[str] = None,
                    route_overlap: Optional[str] = None,
                    single_source: Optional[str] = None,
                    src_addr_type: Optional[str] = None,
                    src_end_ip: Optional[str] = None,
                    src_end_ip6: Optional[str] = None,
                    src_name: Optional[str] = None,
                    src_name6: Optional[str] = None,
                    src_port: Optional[int] = None,
                    src_start_ip: Optional[str] = None,
                    src_start_ip6: Optional[str] = None,
                    src_subnet: Optional[str] = None,
                    keylifekbs: Optional[int] = None,
                    vdomparam: Optional[str] = None)
    func NewPhase2interface(ctx *Context, name string, args Phase2interfaceArgs, opts ...ResourceOption) (*Phase2interface, error)
    public Phase2interface(string name, Phase2interfaceArgs args, CustomResourceOptions? opts = null)
    public Phase2interface(String name, Phase2interfaceArgs args)
public Phase2interface(String name, Phase2interfaceArgs args, CustomResourceOptions options)

    type: fortios:vpn/ipsec/phase2interface:Phase2interface
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

    Parameters

    name string
    The unique name of the resource.
    args Phase2interfaceArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    resource_name str
    The unique name of the resource.
    args Phase2interfaceArgs
    The arguments to resource properties.
    opts ResourceOptions
    Bag of options to control resource's behavior.
    ctx Context
    Context object for the current deployment.
    name string
    The unique name of the resource.
    args Phase2interfaceArgs
    The arguments to resource properties.
    opts ResourceOption
    Bag of options to control resource's behavior.
    name string
    The unique name of the resource.
    args Phase2interfaceArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    name String
    The unique name of the resource.
    args Phase2interfaceArgs
    The arguments to resource properties.
    options CustomResourceOptions
    Bag of options to control resource's behavior.

    Phase2interface Resource Properties

    To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

    Inputs

    In Python, inputs that are objects can be passed either as argument classes or as dictionary literals.

    The Phase2interface resource accepts the following input properties:

    Phase1name string
    Phase 1 determines the options required for phase 2.
    Proposal string
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    AddRoute string
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    AutoDiscoveryForwarder string
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    AutoDiscoverySender string
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    AutoNegotiate string
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    Comments string
    Comment.
    DhcpIpsec string
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    Dhgrp string
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    Diffserv string
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    Diffservcode string
    DSCP value to be applied to the IPsec tunnel outer IP header.
    DstAddrType string
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    DstEndIp string
    Remote proxy ID IPv4 end.
    DstEndIp6 string
    Remote proxy ID IPv6 end.
    DstName string
    Remote proxy ID name.
    DstName6 string
    Remote proxy ID name.
    DstPort int
    Quick mode destination port (1 - 65535 or 0 for all).
    DstStartIp string
    Remote proxy ID IPv4 start.
    DstStartIp6 string
    Remote proxy ID IPv6 start.
    DstSubnet string
    Remote proxy ID IPv4 subnet.
    DstSubnet6 string
    Remote proxy ID IPv6 subnet.
    Encapsulation string
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    InboundDscpCopy string
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    InitiatorTsNarrow string
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    Ipv4Df string
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    Keepalive string
    Enable/disable keep alive. Valid values: enable, disable.
    KeylifeType string
    Keylife type. Valid values: seconds, kbs, both.
    Keylifekbs int
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    Keylifeseconds int
    Phase2 key life in time in seconds (120 - 172800).
    L2tp string
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    Name string
    IPsec tunnel name.
    Pfs string
    Enable/disable PFS feature. Valid values: enable, disable.
    Protocol int
    Quick mode protocol selector (1 - 255 or 0 for all).
    Replay string
    Enable/disable replay detection. Valid values: enable, disable.
    RouteOverlap string
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    SingleSource string
    Enable/disable single source IP restriction. Valid values: enable, disable.
    SrcAddrType string
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    SrcEndIp string
    Local proxy ID end.
    SrcEndIp6 string
    Local proxy ID IPv6 end.
    SrcName string
    Local proxy ID name.
    SrcName6 string
    Local proxy ID name.
    SrcPort int
    Quick mode source port (1 - 65535 or 0 for all).
    SrcStartIp string
    Local proxy ID start.
    SrcStartIp6 string
    Local proxy ID IPv6 start.
    SrcSubnet string
    Local proxy ID subnet.
    SrcSubnet6 string
    Local proxy ID IPv6 subnet.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Phase1name string
    Phase 1 determines the options required for phase 2.
    Proposal string
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    AddRoute string
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    AutoDiscoveryForwarder string
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    AutoDiscoverySender string
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    AutoNegotiate string
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    Comments string
    Comment.
    DhcpIpsec string
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    Dhgrp string
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    Diffserv string
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    Diffservcode string
    DSCP value to be applied to the IPsec tunnel outer IP header.
    DstAddrType string
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    DstEndIp string
    Remote proxy ID IPv4 end.
    DstEndIp6 string
    Remote proxy ID IPv6 end.
    DstName string
    Remote proxy ID name.
    DstName6 string
    Remote proxy ID name.
    DstPort int
    Quick mode destination port (1 - 65535 or 0 for all).
    DstStartIp string
    Remote proxy ID IPv4 start.
    DstStartIp6 string
    Remote proxy ID IPv6 start.
    DstSubnet string
    Remote proxy ID IPv4 subnet.
    DstSubnet6 string
    Remote proxy ID IPv6 subnet.
    Encapsulation string
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    InboundDscpCopy string
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    InitiatorTsNarrow string
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    Ipv4Df string
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    Keepalive string
    Enable/disable keep alive. Valid values: enable, disable.
    KeylifeType string
    Keylife type. Valid values: seconds, kbs, both.
    Keylifekbs int
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    Keylifeseconds int
    Phase2 key life in time in seconds (120 - 172800).
    L2tp string
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    Name string
    IPsec tunnel name.
    Pfs string
    Enable/disable PFS feature. Valid values: enable, disable.
    Protocol int
    Quick mode protocol selector (1 - 255 or 0 for all).
    Replay string
    Enable/disable replay detection. Valid values: enable, disable.
    RouteOverlap string
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    SingleSource string
    Enable/disable single source IP restriction. Valid values: enable, disable.
    SrcAddrType string
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    SrcEndIp string
    Local proxy ID end.
    SrcEndIp6 string
    Local proxy ID IPv6 end.
    SrcName string
    Local proxy ID name.
    SrcName6 string
    Local proxy ID name.
    SrcPort int
    Quick mode source port (1 - 65535 or 0 for all).
    SrcStartIp string
    Local proxy ID start.
    SrcStartIp6 string
    Local proxy ID IPv6 start.
    SrcSubnet string
    Local proxy ID subnet.
    SrcSubnet6 string
    Local proxy ID IPv6 subnet.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase1name String
    Phase 1 determines the options required for phase 2.
    proposal String
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    addRoute String
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    autoDiscoveryForwarder String
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    autoDiscoverySender String
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    autoNegotiate String
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    comments String
    Comment.
    dhcpIpsec String
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    dhgrp String
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    diffserv String
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    diffservcode String
    DSCP value to be applied to the IPsec tunnel outer IP header.
    dstAddrType String
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    dstEndIp String
    Remote proxy ID IPv4 end.
    dstEndIp6 String
    Remote proxy ID IPv6 end.
    dstName String
    Remote proxy ID name.
    dstName6 String
    Remote proxy ID name.
    dstPort Integer
    Quick mode destination port (1 - 65535 or 0 for all).
    dstStartIp String
    Remote proxy ID IPv4 start.
    dstStartIp6 String
    Remote proxy ID IPv6 start.
    dstSubnet String
    Remote proxy ID IPv4 subnet.
    dstSubnet6 String
    Remote proxy ID IPv6 subnet.
    encapsulation String
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    inboundDscpCopy String
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    initiatorTsNarrow String
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    ipv4Df String
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    keepalive String
    Enable/disable keep alive. Valid values: enable, disable.
    keylifeType String
    Keylife type. Valid values: seconds, kbs, both.
    keylifekbs Integer
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    keylifeseconds Integer
    Phase2 key life in time in seconds (120 - 172800).
    l2tp String
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    name String
    IPsec tunnel name.
    pfs String
    Enable/disable PFS feature. Valid values: enable, disable.
    protocol Integer
    Quick mode protocol selector (1 - 255 or 0 for all).
    replay String
    Enable/disable replay detection. Valid values: enable, disable.
    routeOverlap String
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    singleSource String
    Enable/disable single source IP restriction. Valid values: enable, disable.
    srcAddrType String
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    srcEndIp String
    Local proxy ID end.
    srcEndIp6 String
    Local proxy ID IPv6 end.
    srcName String
    Local proxy ID name.
    srcName6 String
    Local proxy ID name.
    srcPort Integer
    Quick mode source port (1 - 65535 or 0 for all).
    srcStartIp String
    Local proxy ID start.
    srcStartIp6 String
    Local proxy ID IPv6 start.
    srcSubnet String
    Local proxy ID subnet.
    srcSubnet6 String
    Local proxy ID IPv6 subnet.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase1name string
    Phase 1 determines the options required for phase 2.
    proposal string
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    addRoute string
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    autoDiscoveryForwarder string
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    autoDiscoverySender string
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    autoNegotiate string
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    comments string
    Comment.
    dhcpIpsec string
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    dhgrp string
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    diffserv string
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    diffservcode string
    DSCP value to be applied to the IPsec tunnel outer IP header.
    dstAddrType string
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    dstEndIp string
    Remote proxy ID IPv4 end.
    dstEndIp6 string
    Remote proxy ID IPv6 end.
    dstName string
    Remote proxy ID name.
    dstName6 string
    Remote proxy ID name.
    dstPort number
    Quick mode destination port (1 - 65535 or 0 for all).
    dstStartIp string
    Remote proxy ID IPv4 start.
    dstStartIp6 string
    Remote proxy ID IPv6 start.
    dstSubnet string
    Remote proxy ID IPv4 subnet.
    dstSubnet6 string
    Remote proxy ID IPv6 subnet.
    encapsulation string
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    inboundDscpCopy string
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    initiatorTsNarrow string
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    ipv4Df string
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    keepalive string
    Enable/disable keep alive. Valid values: enable, disable.
    keylifeType string
    Keylife type. Valid values: seconds, kbs, both.
    keylifekbs number
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    keylifeseconds number
    Phase2 key life in time in seconds (120 - 172800).
    l2tp string
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    name string
    IPsec tunnel name.
    pfs string
    Enable/disable PFS feature. Valid values: enable, disable.
    protocol number
    Quick mode protocol selector (1 - 255 or 0 for all).
    replay string
    Enable/disable replay detection. Valid values: enable, disable.
    routeOverlap string
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    singleSource string
    Enable/disable single source IP restriction. Valid values: enable, disable.
    srcAddrType string
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    srcEndIp string
    Local proxy ID end.
    srcEndIp6 string
    Local proxy ID IPv6 end.
    srcName string
    Local proxy ID name.
    srcName6 string
    Local proxy ID name.
    srcPort number
    Quick mode source port (1 - 65535 or 0 for all).
    srcStartIp string
    Local proxy ID start.
    srcStartIp6 string
    Local proxy ID IPv6 start.
    srcSubnet string
    Local proxy ID subnet.
    srcSubnet6 string
    Local proxy ID IPv6 subnet.
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase1name str
    Phase 1 determines the options required for phase 2.
    proposal str
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    add_route str
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    auto_discovery_forwarder str
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    auto_discovery_sender str
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    auto_negotiate str
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    comments str
    Comment.
    dhcp_ipsec str
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    dhgrp str
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    diffserv str
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    diffservcode str
    DSCP value to be applied to the IPsec tunnel outer IP header.
    dst_addr_type str
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    dst_end_ip str
    Remote proxy ID IPv4 end.
    dst_end_ip6 str
    Remote proxy ID IPv6 end.
    dst_name str
    Remote proxy ID name.
    dst_name6 str
    Remote proxy ID name.
    dst_port int
    Quick mode destination port (1 - 65535 or 0 for all).
    dst_start_ip str
    Remote proxy ID IPv4 start.
    dst_start_ip6 str
    Remote proxy ID IPv6 start.
    dst_subnet str
    Remote proxy ID IPv4 subnet.
    dst_subnet6 str
    Remote proxy ID IPv6 subnet.
    encapsulation str
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    inbound_dscp_copy str
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    initiator_ts_narrow str
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    ipv4_df str
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    keepalive str
    Enable/disable keep alive. Valid values: enable, disable.
    keylife_type str
    Keylife type. Valid values: seconds, kbs, both.
    keylifekbs int
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    keylifeseconds int
    Phase2 key life in time in seconds (120 - 172800).
    l2tp str
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    name str
    IPsec tunnel name.
    pfs str
    Enable/disable PFS feature. Valid values: enable, disable.
    protocol int
    Quick mode protocol selector (1 - 255 or 0 for all).
    replay str
    Enable/disable replay detection. Valid values: enable, disable.
    route_overlap str
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    single_source str
    Enable/disable single source IP restriction. Valid values: enable, disable.
    src_addr_type str
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    src_end_ip str
    Local proxy ID end.
    src_end_ip6 str
    Local proxy ID IPv6 end.
    src_name str
    Local proxy ID name.
    src_name6 str
    Local proxy ID name.
    src_port int
    Quick mode source port (1 - 65535 or 0 for all).
    src_start_ip str
    Local proxy ID start.
    src_start_ip6 str
    Local proxy ID IPv6 start.
    src_subnet str
    Local proxy ID subnet.
    src_subnet6 str
    Local proxy ID IPv6 subnet.
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase1name String
    Phase 1 determines the options required for phase 2.
    proposal String
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    addRoute String
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    autoDiscoveryForwarder String
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    autoDiscoverySender String
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    autoNegotiate String
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    comments String
    Comment.
    dhcpIpsec String
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    dhgrp String
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    diffserv String
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    diffservcode String
    DSCP value to be applied to the IPsec tunnel outer IP header.
    dstAddrType String
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    dstEndIp String
    Remote proxy ID IPv4 end.
    dstEndIp6 String
    Remote proxy ID IPv6 end.
    dstName String
    Remote proxy ID name.
    dstName6 String
    Remote proxy ID name.
    dstPort Number
    Quick mode destination port (1 - 65535 or 0 for all).
    dstStartIp String
    Remote proxy ID IPv4 start.
    dstStartIp6 String
    Remote proxy ID IPv6 start.
    dstSubnet String
    Remote proxy ID IPv4 subnet.
    dstSubnet6 String
    Remote proxy ID IPv6 subnet.
    encapsulation String
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    inboundDscpCopy String
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    initiatorTsNarrow String
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    ipv4Df String
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    keepalive String
    Enable/disable keep alive. Valid values: enable, disable.
    keylifeType String
    Keylife type. Valid values: seconds, kbs, both.
    keylifekbs Number
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    keylifeseconds Number
    Phase2 key life in time in seconds (120 - 172800).
    l2tp String
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    name String
    IPsec tunnel name.
    pfs String
    Enable/disable PFS feature. Valid values: enable, disable.
    protocol Number
    Quick mode protocol selector (1 - 255 or 0 for all).
    replay String
    Enable/disable replay detection. Valid values: enable, disable.
    routeOverlap String
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    singleSource String
    Enable/disable single source IP restriction. Valid values: enable, disable.
    srcAddrType String
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    srcEndIp String
    Local proxy ID end.
    srcEndIp6 String
    Local proxy ID IPv6 end.
    srcName String
    Local proxy ID name.
    srcName6 String
    Local proxy ID name.
    srcPort Number
    Quick mode source port (1 - 65535 or 0 for all).
    srcStartIp String
    Local proxy ID start.
    srcStartIp6 String
    Local proxy ID IPv6 start.
    srcSubnet String
    Local proxy ID subnet.
    srcSubnet6 String
    Local proxy ID IPv6 subnet.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

    Outputs

    All input properties are implicitly available as output properties. Additionally, the Phase2interface resource produces the following output properties:

    Id string
    The provider-assigned unique ID for this managed resource.
    Id string
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.
    id string
    The provider-assigned unique ID for this managed resource.
    id str
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.

    Look up Existing Phase2interface Resource

    Get an existing Phase2interface resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

    public static get(name: string, id: Input<ID>, state?: Phase2interfaceState, opts?: CustomResourceOptions): Phase2interface
    @staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        add_route: Optional[str] = None,
        auto_discovery_forwarder: Optional[str] = None,
        auto_discovery_sender: Optional[str] = None,
        auto_negotiate: Optional[str] = None,
        comments: Optional[str] = None,
        dhcp_ipsec: Optional[str] = None,
        dhgrp: Optional[str] = None,
        diffserv: Optional[str] = None,
        diffservcode: Optional[str] = None,
        dst_addr_type: Optional[str] = None,
        dst_end_ip: Optional[str] = None,
        dst_end_ip6: Optional[str] = None,
        dst_name: Optional[str] = None,
        dst_name6: Optional[str] = None,
        dst_port: Optional[int] = None,
        dst_start_ip: Optional[str] = None,
        dst_start_ip6: Optional[str] = None,
        dst_subnet: Optional[str] = None,
        dst_subnet6: Optional[str] = None,
        encapsulation: Optional[str] = None,
        inbound_dscp_copy: Optional[str] = None,
        initiator_ts_narrow: Optional[str] = None,
        ipv4_df: Optional[str] = None,
        keepalive: Optional[str] = None,
        keylife_type: Optional[str] = None,
        keylifekbs: Optional[int] = None,
        keylifeseconds: Optional[int] = None,
        l2tp: Optional[str] = None,
        name: Optional[str] = None,
        pfs: Optional[str] = None,
        phase1name: Optional[str] = None,
        proposal: Optional[str] = None,
        protocol: Optional[int] = None,
        replay: Optional[str] = None,
        route_overlap: Optional[str] = None,
        single_source: Optional[str] = None,
        src_addr_type: Optional[str] = None,
        src_end_ip: Optional[str] = None,
        src_end_ip6: Optional[str] = None,
        src_name: Optional[str] = None,
        src_name6: Optional[str] = None,
        src_port: Optional[int] = None,
        src_start_ip: Optional[str] = None,
        src_start_ip6: Optional[str] = None,
        src_subnet: Optional[str] = None,
        src_subnet6: Optional[str] = None,
        vdomparam: Optional[str] = None) -> Phase2interface
    func GetPhase2interface(ctx *Context, name string, id IDInput, state *Phase2interfaceState, opts ...ResourceOption) (*Phase2interface, error)
    public static Phase2interface Get(string name, Input<string> id, Phase2interfaceState? state, CustomResourceOptions? opts = null)
    public static Phase2interface get(String name, Output<String> id, Phase2interfaceState state, CustomResourceOptions options)
    Resource lookup is not supported in YAML
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    resource_name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    The following state arguments are supported:
    AddRoute string
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    AutoDiscoveryForwarder string
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    AutoDiscoverySender string
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    AutoNegotiate string
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    Comments string
    Comment.
    DhcpIpsec string
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    Dhgrp string
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    Diffserv string
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    Diffservcode string
    DSCP value to be applied to the IPsec tunnel outer IP header.
    DstAddrType string
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    DstEndIp string
    Remote proxy ID IPv4 end.
    DstEndIp6 string
    Remote proxy ID IPv6 end.
    DstName string
    Remote proxy ID name.
    DstName6 string
    Remote proxy ID name.
    DstPort int
    Quick mode destination port (1 - 65535 or 0 for all).
    DstStartIp string
    Remote proxy ID IPv4 start.
    DstStartIp6 string
    Remote proxy ID IPv6 start.
    DstSubnet string
    Remote proxy ID IPv4 subnet.
    DstSubnet6 string
    Remote proxy ID IPv6 subnet.
    Encapsulation string
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    InboundDscpCopy string
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    InitiatorTsNarrow string
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    Ipv4Df string
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    Keepalive string
    Enable/disable keep alive. Valid values: enable, disable.
    KeylifeType string
    Keylife type. Valid values: seconds, kbs, both.
    Keylifekbs int
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    Keylifeseconds int
    Phase2 key life in time in seconds (120 - 172800).
    L2tp string
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    Name string
    IPsec tunnel name.
    Pfs string
    Enable/disable PFS feature. Valid values: enable, disable.
    Phase1name string
    Phase 1 determines the options required for phase 2.
    Proposal string
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    Protocol int
    Quick mode protocol selector (1 - 255 or 0 for all).
    Replay string
    Enable/disable replay detection. Valid values: enable, disable.
    RouteOverlap string
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    SingleSource string
    Enable/disable single source IP restriction. Valid values: enable, disable.
    SrcAddrType string
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    SrcEndIp string
    Local proxy ID end.
    SrcEndIp6 string
    Local proxy ID IPv6 end.
    SrcName string
    Local proxy ID name.
    SrcName6 string
    Local proxy ID name.
    SrcPort int
    Quick mode source port (1 - 65535 or 0 for all).
    SrcStartIp string
    Local proxy ID start.
    SrcStartIp6 string
    Local proxy ID IPv6 start.
    SrcSubnet string
    Local proxy ID subnet.
    SrcSubnet6 string
    Local proxy ID IPv6 subnet.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    AddRoute string
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    AutoDiscoveryForwarder string
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    AutoDiscoverySender string
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    AutoNegotiate string
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    Comments string
    Comment.
    DhcpIpsec string
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    Dhgrp string
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    Diffserv string
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    Diffservcode string
    DSCP value to be applied to the IPsec tunnel outer IP header.
    DstAddrType string
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    DstEndIp string
    Remote proxy ID IPv4 end.
    DstEndIp6 string
    Remote proxy ID IPv6 end.
    DstName string
    Remote proxy ID name.
    DstName6 string
    Remote proxy ID name.
    DstPort int
    Quick mode destination port (1 - 65535 or 0 for all).
    DstStartIp string
    Remote proxy ID IPv4 start.
    DstStartIp6 string
    Remote proxy ID IPv6 start.
    DstSubnet string
    Remote proxy ID IPv4 subnet.
    DstSubnet6 string
    Remote proxy ID IPv6 subnet.
    Encapsulation string
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    InboundDscpCopy string
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    InitiatorTsNarrow string
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    Ipv4Df string
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    Keepalive string
    Enable/disable keep alive. Valid values: enable, disable.
    KeylifeType string
    Keylife type. Valid values: seconds, kbs, both.
    Keylifekbs int
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    Keylifeseconds int
    Phase2 key life in time in seconds (120 - 172800).
    L2tp string
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    Name string
    IPsec tunnel name.
    Pfs string
    Enable/disable PFS feature. Valid values: enable, disable.
    Phase1name string
    Phase 1 determines the options required for phase 2.
    Proposal string
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    Protocol int
    Quick mode protocol selector (1 - 255 or 0 for all).
    Replay string
    Enable/disable replay detection. Valid values: enable, disable.
    RouteOverlap string
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    SingleSource string
    Enable/disable single source IP restriction. Valid values: enable, disable.
    SrcAddrType string
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    SrcEndIp string
    Local proxy ID end.
    SrcEndIp6 string
    Local proxy ID IPv6 end.
    SrcName string
    Local proxy ID name.
    SrcName6 string
    Local proxy ID name.
    SrcPort int
    Quick mode source port (1 - 65535 or 0 for all).
    SrcStartIp string
    Local proxy ID start.
    SrcStartIp6 string
    Local proxy ID IPv6 start.
    SrcSubnet string
    Local proxy ID subnet.
    SrcSubnet6 string
    Local proxy ID IPv6 subnet.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    addRoute String
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    autoDiscoveryForwarder String
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    autoDiscoverySender String
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    autoNegotiate String
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    comments String
    Comment.
    dhcpIpsec String
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    dhgrp String
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    diffserv String
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    diffservcode String
    DSCP value to be applied to the IPsec tunnel outer IP header.
    dstAddrType String
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    dstEndIp String
    Remote proxy ID IPv4 end.
    dstEndIp6 String
    Remote proxy ID IPv6 end.
    dstName String
    Remote proxy ID name.
    dstName6 String
    Remote proxy ID name.
    dstPort Integer
    Quick mode destination port (1 - 65535 or 0 for all).
    dstStartIp String
    Remote proxy ID IPv4 start.
    dstStartIp6 String
    Remote proxy ID IPv6 start.
    dstSubnet String
    Remote proxy ID IPv4 subnet.
    dstSubnet6 String
    Remote proxy ID IPv6 subnet.
    encapsulation String
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    inboundDscpCopy String
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    initiatorTsNarrow String
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    ipv4Df String
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    keepalive String
    Enable/disable keep alive. Valid values: enable, disable.
    keylifeType String
    Keylife type. Valid values: seconds, kbs, both.
    keylifekbs Integer
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    keylifeseconds Integer
    Phase2 key life in time in seconds (120 - 172800).
    l2tp String
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    name String
    IPsec tunnel name.
    pfs String
    Enable/disable PFS feature. Valid values: enable, disable.
    phase1name String
    Phase 1 determines the options required for phase 2.
    proposal String
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    protocol Integer
    Quick mode protocol selector (1 - 255 or 0 for all).
    replay String
    Enable/disable replay detection. Valid values: enable, disable.
    routeOverlap String
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    singleSource String
    Enable/disable single source IP restriction. Valid values: enable, disable.
    srcAddrType String
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    srcEndIp String
    Local proxy ID end.
    srcEndIp6 String
    Local proxy ID IPv6 end.
    srcName String
    Local proxy ID name.
    srcName6 String
    Local proxy ID name.
    srcPort Integer
    Quick mode source port (1 - 65535 or 0 for all).
    srcStartIp String
    Local proxy ID start.
    srcStartIp6 String
    Local proxy ID IPv6 start.
    srcSubnet String
    Local proxy ID subnet.
    srcSubnet6 String
    Local proxy ID IPv6 subnet.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    addRoute string
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    autoDiscoveryForwarder string
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    autoDiscoverySender string
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    autoNegotiate string
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    comments string
    Comment.
    dhcpIpsec string
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    dhgrp string
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    diffserv string
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    diffservcode string
    DSCP value to be applied to the IPsec tunnel outer IP header.
    dstAddrType string
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    dstEndIp string
    Remote proxy ID IPv4 end.
    dstEndIp6 string
    Remote proxy ID IPv6 end.
    dstName string
    Remote proxy ID name.
    dstName6 string
    Remote proxy ID name.
    dstPort number
    Quick mode destination port (1 - 65535 or 0 for all).
    dstStartIp string
    Remote proxy ID IPv4 start.
    dstStartIp6 string
    Remote proxy ID IPv6 start.
    dstSubnet string
    Remote proxy ID IPv4 subnet.
    dstSubnet6 string
    Remote proxy ID IPv6 subnet.
    encapsulation string
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    inboundDscpCopy string
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    initiatorTsNarrow string
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    ipv4Df string
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    keepalive string
    Enable/disable keep alive. Valid values: enable, disable.
    keylifeType string
    Keylife type. Valid values: seconds, kbs, both.
    keylifekbs number
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    keylifeseconds number
    Phase2 key life in time in seconds (120 - 172800).
    l2tp string
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    name string
    IPsec tunnel name.
    pfs string
    Enable/disable PFS feature. Valid values: enable, disable.
    phase1name string
    Phase 1 determines the options required for phase 2.
    proposal string
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    protocol number
    Quick mode protocol selector (1 - 255 or 0 for all).
    replay string
    Enable/disable replay detection. Valid values: enable, disable.
    routeOverlap string
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    singleSource string
    Enable/disable single source IP restriction. Valid values: enable, disable.
    srcAddrType string
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    srcEndIp string
    Local proxy ID end.
    srcEndIp6 string
    Local proxy ID IPv6 end.
    srcName string
    Local proxy ID name.
    srcName6 string
    Local proxy ID name.
    srcPort number
    Quick mode source port (1 - 65535 or 0 for all).
    srcStartIp string
    Local proxy ID start.
    srcStartIp6 string
    Local proxy ID IPv6 start.
    srcSubnet string
    Local proxy ID subnet.
    srcSubnet6 string
    Local proxy ID IPv6 subnet.
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    add_route str
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    auto_discovery_forwarder str
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    auto_discovery_sender str
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    auto_negotiate str
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    comments str
    Comment.
    dhcp_ipsec str
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    dhgrp str
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    diffserv str
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    diffservcode str
    DSCP value to be applied to the IPsec tunnel outer IP header.
    dst_addr_type str
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    dst_end_ip str
    Remote proxy ID IPv4 end.
    dst_end_ip6 str
    Remote proxy ID IPv6 end.
    dst_name str
    Remote proxy ID name.
    dst_name6 str
    Remote proxy ID name.
    dst_port int
    Quick mode destination port (1 - 65535 or 0 for all).
    dst_start_ip str
    Remote proxy ID IPv4 start.
    dst_start_ip6 str
    Remote proxy ID IPv6 start.
    dst_subnet str
    Remote proxy ID IPv4 subnet.
    dst_subnet6 str
    Remote proxy ID IPv6 subnet.
    encapsulation str
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    inbound_dscp_copy str
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    initiator_ts_narrow str
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    ipv4_df str
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    keepalive str
    Enable/disable keep alive. Valid values: enable, disable.
    keylife_type str
    Keylife type. Valid values: seconds, kbs, both.
    keylifekbs int
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    keylifeseconds int
    Phase2 key life in time in seconds (120 - 172800).
    l2tp str
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    name str
    IPsec tunnel name.
    pfs str
    Enable/disable PFS feature. Valid values: enable, disable.
    phase1name str
    Phase 1 determines the options required for phase 2.
    proposal str
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    protocol int
    Quick mode protocol selector (1 - 255 or 0 for all).
    replay str
    Enable/disable replay detection. Valid values: enable, disable.
    route_overlap str
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    single_source str
    Enable/disable single source IP restriction. Valid values: enable, disable.
    src_addr_type str
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    src_end_ip str
    Local proxy ID end.
    src_end_ip6 str
    Local proxy ID IPv6 end.
    src_name str
    Local proxy ID name.
    src_name6 str
    Local proxy ID name.
    src_port int
    Quick mode source port (1 - 65535 or 0 for all).
    src_start_ip str
    Local proxy ID start.
    src_start_ip6 str
    Local proxy ID IPv6 start.
    src_subnet str
    Local proxy ID subnet.
    src_subnet6 str
    Local proxy ID IPv6 subnet.
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    addRoute String
    Enable/disable automatic route addition. Valid values: phase1, enable, disable.
    autoDiscoveryForwarder String
    Enable/disable forwarding short-cut messages. Valid values: phase1, enable, disable.
    autoDiscoverySender String
    Enable/disable sending short-cut messages. Valid values: phase1, enable, disable.
    autoNegotiate String
    Enable/disable IPsec SA auto-negotiation. Valid values: enable, disable.
    comments String
    Comment.
    dhcpIpsec String
    Enable/disable DHCP-IPsec. Valid values: enable, disable.
    dhgrp String
    Phase2 DH group. Valid values: 1, 2, 5, 14, 15, 16, 17, 18, 19, 20, 21, 27, 28, 29, 30, 31, 32.
    diffserv String
    Enable/disable applying DSCP value to the IPsec tunnel outer IP header. Valid values: enable, disable.
    diffservcode String
    DSCP value to be applied to the IPsec tunnel outer IP header.
    dstAddrType String
    Remote proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    dstEndIp String
    Remote proxy ID IPv4 end.
    dstEndIp6 String
    Remote proxy ID IPv6 end.
    dstName String
    Remote proxy ID name.
    dstName6 String
    Remote proxy ID name.
    dstPort Number
    Quick mode destination port (1 - 65535 or 0 for all).
    dstStartIp String
    Remote proxy ID IPv4 start.
    dstStartIp6 String
    Remote proxy ID IPv6 start.
    dstSubnet String
    Remote proxy ID IPv4 subnet.
    dstSubnet6 String
    Remote proxy ID IPv6 subnet.
    encapsulation String
    ESP encapsulation mode. Valid values: tunnel-mode, transport-mode.
    inboundDscpCopy String
    Enable/disable copying of the DSCP field in the ESP header to the inner IP header. Valid values: phase1, enable, disable.
    initiatorTsNarrow String
    Enable/disable traffic selector narrowing for IKEv2 initiator. Valid values: enable, disable.
    ipv4Df String
    Enable/disable setting and resetting of IPv4 'Don't Fragment' bit. Valid values: enable, disable.
    keepalive String
    Enable/disable keep alive. Valid values: enable, disable.
    keylifeType String
    Keylife type. Valid values: seconds, kbs, both.
    keylifekbs Number
    Phase2 key life in number of kilobytes of traffic (5120 - 4294967295).
    keylifeseconds Number
    Phase2 key life in time in seconds (120 - 172800).
    l2tp String
    Enable/disable L2TP over IPsec. Valid values: enable, disable.
    name String
    IPsec tunnel name.
    pfs String
    Enable/disable PFS feature. Valid values: enable, disable.
    phase1name String
    Phase 1 determines the options required for phase 2.
    proposal String
    Phase2 proposal. Valid values: null-md5, null-sha1, null-sha256, null-sha384, null-sha512, des-null, des-md5, des-sha1, des-sha256, des-sha384, des-sha512, 3des-null, 3des-md5, 3des-sha1, 3des-sha256, 3des-sha384, 3des-sha512, aes128-null, aes128-md5, aes128-sha1, aes128-sha256, aes128-sha384, aes128-sha512, aes128gcm, aes192-null, aes192-md5, aes192-sha1, aes192-sha256, aes192-sha384, aes192-sha512, aes256-null, aes256-md5, aes256-sha1, aes256-sha256, aes256-sha384, aes256-sha512, aes256gcm, chacha20poly1305, aria128-null, aria128-md5, aria128-sha1, aria128-sha256, aria128-sha384, aria128-sha512, aria192-null, aria192-md5, aria192-sha1, aria192-sha256, aria192-sha384, aria192-sha512, aria256-null, aria256-md5, aria256-sha1, aria256-sha256, aria256-sha384, aria256-sha512, seed-null, seed-md5, seed-sha1, seed-sha256, seed-sha384, seed-sha512.
    protocol Number
    Quick mode protocol selector (1 - 255 or 0 for all).
    replay String
    Enable/disable replay detection. Valid values: enable, disable.
    routeOverlap String
    Action for overlapping routes. Valid values: use-old, use-new, allow.
    singleSource String
    Enable/disable single source IP restriction. Valid values: enable, disable.
    srcAddrType String
    Local proxy ID type. Valid values: subnet, range, ip, name, subnet6, range6, ip6, name6.
    srcEndIp String
    Local proxy ID end.
    srcEndIp6 String
    Local proxy ID IPv6 end.
    srcName String
    Local proxy ID name.
    srcName6 String
    Local proxy ID name.
    srcPort Number
    Quick mode source port (1 - 65535 or 0 for all).
    srcStartIp String
    Local proxy ID start.
    srcStartIp6 String
    Local proxy ID IPv6 start.
    srcSubnet String
    Local proxy ID subnet.
    srcSubnet6 String
    Local proxy ID IPv6 subnet.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

    Import

    VpnIpsec Phase2Interface can be imported using any of these accepted formats:

    $ pulumi import fortios:vpn/ipsec/phase2interface:Phase2interface labelname {{name}}

    If you do not want to import arguments of block:

    $ export “FORTIOS_IMPORT_TABLE”=“false”

    $ pulumi import fortios:vpn/ipsec/phase2interface:Phase2interface labelname {{name}}

    $ unset “FORTIOS_IMPORT_TABLE”

    To learn more about importing existing cloud resources, see Importing resources.

    Package Details

    Repository
    fortios pulumiverse/pulumi-fortios
    License
    Apache-2.0
    Notes
    This Pulumi package is based on the fortios Terraform Provider.
    fortios logo
    Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse
    pulumiverse/pulumi-fortios