Fortios v0.0.6, Jul 9 24

Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse

fortios.extendercontroller.Extender1

Explore with Pulumi AI

Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse

Example Usage

import * as pulumi from "@pulumi/pulumi";
import * as fortios from "@pulumiverse/fortios";

const trname = new fortios.extendercontroller.Extender1("trname", {
    authorized: "disable",
    controllerReport: {
        interval: 300,
        signalThreshold: 10,
        status: "disable",
    },
    extName: "2932",
    fosid: "FX201E5919004031",
    modem1: {
        autoSwitch: {
            dataplan: "disable",
            disconnect: "disable",
            disconnectPeriod: 600,
            disconnectThreshold: 3,
            signal: "disable",
            switchBack: "timer",
            switchBackTime: "00:01",
            switchBackTimer: 86400,
        },
        connStatus: 0,
        defaultSim: "sim2",
        gps: "enable",
        redundantIntf: "s1",
        redundantMode: "enable",
        sim1Pin: "disable",
        sim1PinCode: "testpincode",
        sim2Pin: "disable",
    },
    modem2: {
        autoSwitch: {
            dataplan: "disable",
            disconnect: "disable",
            disconnectPeriod: 600,
            disconnectThreshold: 3,
            signal: "disable",
            switchBackTime: "00:01",
            switchBackTimer: 86400,
        },
        connStatus: 0,
        defaultSim: "sim1",
        gps: "enable",
        redundantMode: "disable",
        sim1Pin: "disable",
        sim2Pin: "disable",
    },
    vdom: 0,
});

import pulumi
import pulumiverse_fortios as fortios

trname = fortios.extendercontroller.Extender1("trname",
    authorized="disable",
    controller_report=fortios.extendercontroller.Extender1ControllerReportArgs(
        interval=300,
        signal_threshold=10,
        status="disable",
    ),
    ext_name="2932",
    fosid="FX201E5919004031",
    modem1=fortios.extendercontroller.Extender1Modem1Args(
        auto_switch=fortios.extendercontroller.Extender1Modem1AutoSwitchArgs(
            dataplan="disable",
            disconnect="disable",
            disconnect_period=600,
            disconnect_threshold=3,
            signal="disable",
            switch_back="timer",
            switch_back_time="00:01",
            switch_back_timer=86400,
        ),
        conn_status=0,
        default_sim="sim2",
        gps="enable",
        redundant_intf="s1",
        redundant_mode="enable",
        sim1_pin="disable",
        sim1_pin_code="testpincode",
        sim2_pin="disable",
    ),
    modem2=fortios.extendercontroller.Extender1Modem2Args(
        auto_switch=fortios.extendercontroller.Extender1Modem2AutoSwitchArgs(
            dataplan="disable",
            disconnect="disable",
            disconnect_period=600,
            disconnect_threshold=3,
            signal="disable",
            switch_back_time="00:01",
            switch_back_timer=86400,
        ),
        conn_status=0,
        default_sim="sim1",
        gps="enable",
        redundant_mode="disable",
        sim1_pin="disable",
        sim2_pin="disable",
    ),
    vdom=0)

package main

import (
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
	"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/extendercontroller"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		_, err := extendercontroller.NewExtender1(ctx, "trname", &extendercontroller.Extender1Args{
			Authorized: pulumi.String("disable"),
			ControllerReport: &extendercontroller.Extender1ControllerReportArgs{
				Interval:        pulumi.Int(300),
				SignalThreshold: pulumi.Int(10),
				Status:          pulumi.String("disable"),
			},
			ExtName: pulumi.String("2932"),
			Fosid:   pulumi.String("FX201E5919004031"),
			Modem1: &extendercontroller.Extender1Modem1Args{
				AutoSwitch: &extendercontroller.Extender1Modem1AutoSwitchArgs{
					Dataplan:            pulumi.String("disable"),
					Disconnect:          pulumi.String("disable"),
					DisconnectPeriod:    pulumi.Int(600),
					DisconnectThreshold: pulumi.Int(3),
					Signal:              pulumi.String("disable"),
					SwitchBack:          pulumi.String("timer"),
					SwitchBackTime:      pulumi.String("00:01"),
					SwitchBackTimer:     pulumi.Int(86400),
				},
				ConnStatus:    pulumi.Int(0),
				DefaultSim:    pulumi.String("sim2"),
				Gps:           pulumi.String("enable"),
				RedundantIntf: pulumi.String("s1"),
				RedundantMode: pulumi.String("enable"),
				Sim1Pin:       pulumi.String("disable"),
				Sim1PinCode:   pulumi.String("testpincode"),
				Sim2Pin:       pulumi.String("disable"),
			},
			Modem2: &extendercontroller.Extender1Modem2Args{
				AutoSwitch: &extendercontroller.Extender1Modem2AutoSwitchArgs{
					Dataplan:            pulumi.String("disable"),
					Disconnect:          pulumi.String("disable"),
					DisconnectPeriod:    pulumi.Int(600),
					DisconnectThreshold: pulumi.Int(3),
					Signal:              pulumi.String("disable"),
					SwitchBackTime:      pulumi.String("00:01"),
					SwitchBackTimer:     pulumi.Int(86400),
				},
				ConnStatus:    pulumi.Int(0),
				DefaultSim:    pulumi.String("sim1"),
				Gps:           pulumi.String("enable"),
				RedundantMode: pulumi.String("disable"),
				Sim1Pin:       pulumi.String("disable"),
				Sim2Pin:       pulumi.String("disable"),
			},
			Vdom: pulumi.Int(0),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Fortios = Pulumiverse.Fortios;

return await Deployment.RunAsync(() => 
{
    var trname = new Fortios.Extendercontroller.Extender1("trname", new()
    {
        Authorized = "disable",
        ControllerReport = new Fortios.Extendercontroller.Inputs.Extender1ControllerReportArgs
        {
            Interval = 300,
            SignalThreshold = 10,
            Status = "disable",
        },
        ExtName = "2932",
        Fosid = "FX201E5919004031",
        Modem1 = new Fortios.Extendercontroller.Inputs.Extender1Modem1Args
        {
            AutoSwitch = new Fortios.Extendercontroller.Inputs.Extender1Modem1AutoSwitchArgs
            {
                Dataplan = "disable",
                Disconnect = "disable",
                DisconnectPeriod = 600,
                DisconnectThreshold = 3,
                Signal = "disable",
                SwitchBack = "timer",
                SwitchBackTime = "00:01",
                SwitchBackTimer = 86400,
            },
            ConnStatus = 0,
            DefaultSim = "sim2",
            Gps = "enable",
            RedundantIntf = "s1",
            RedundantMode = "enable",
            Sim1Pin = "disable",
            Sim1PinCode = "testpincode",
            Sim2Pin = "disable",
        },
        Modem2 = new Fortios.Extendercontroller.Inputs.Extender1Modem2Args
        {
            AutoSwitch = new Fortios.Extendercontroller.Inputs.Extender1Modem2AutoSwitchArgs
            {
                Dataplan = "disable",
                Disconnect = "disable",
                DisconnectPeriod = 600,
                DisconnectThreshold = 3,
                Signal = "disable",
                SwitchBackTime = "00:01",
                SwitchBackTimer = 86400,
            },
            ConnStatus = 0,
            DefaultSim = "sim1",
            Gps = "enable",
            RedundantMode = "disable",
            Sim1Pin = "disable",
            Sim2Pin = "disable",
        },
        Vdom = 0,
    });

});

package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.fortios.extendercontroller.Extender1;
import com.pulumi.fortios.extendercontroller.Extender1Args;
import com.pulumi.fortios.extendercontroller.inputs.Extender1ControllerReportArgs;
import com.pulumi.fortios.extendercontroller.inputs.Extender1Modem1Args;
import com.pulumi.fortios.extendercontroller.inputs.Extender1Modem1AutoSwitchArgs;
import com.pulumi.fortios.extendercontroller.inputs.Extender1Modem2Args;
import com.pulumi.fortios.extendercontroller.inputs.Extender1Modem2AutoSwitchArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
        var trname = new Extender1("trname", Extender1Args.builder()
            .authorized("disable")
            .controllerReport(Extender1ControllerReportArgs.builder()
                .interval(300)
                .signalThreshold(10)
                .status("disable")
                .build())
            .extName("2932")
            .fosid("FX201E5919004031")
            .modem1(Extender1Modem1Args.builder()
                .autoSwitch(Extender1Modem1AutoSwitchArgs.builder()
                    .dataplan("disable")
                    .disconnect("disable")
                    .disconnectPeriod(600)
                    .disconnectThreshold(3)
                    .signal("disable")
                    .switchBack("timer")
                    .switchBackTime("00:01")
                    .switchBackTimer(86400)
                    .build())
                .connStatus(0)
                .defaultSim("sim2")
                .gps("enable")
                .redundantIntf("s1")
                .redundantMode("enable")
                .sim1Pin("disable")
                .sim1PinCode("testpincode")
                .sim2Pin("disable")
                .build())
            .modem2(Extender1Modem2Args.builder()
                .autoSwitch(Extender1Modem2AutoSwitchArgs.builder()
                    .dataplan("disable")
                    .disconnect("disable")
                    .disconnectPeriod(600)
                    .disconnectThreshold(3)
                    .signal("disable")
                    .switchBackTime("00:01")
                    .switchBackTimer(86400)
                    .build())
                .connStatus(0)
                .defaultSim("sim1")
                .gps("enable")
                .redundantMode("disable")
                .sim1Pin("disable")
                .sim2Pin("disable")
                .build())
            .vdom(0)
            .build());

    }
}

resources:
  trname:
    type: fortios:extendercontroller:Extender1
    properties:
      authorized: disable
      controllerReport:
        interval: 300
        signalThreshold: 10
        status: disable
      extName: '2932'
      fosid: FX201E5919004031
      modem1:
        autoSwitch:
          dataplan: disable
          disconnect: disable
          disconnectPeriod: 600
          disconnectThreshold: 3
          signal: disable
          switchBack: timer
          switchBackTime: 00:01
          switchBackTimer: 86400
        connStatus: 0
        defaultSim: sim2
        gps: enable
        redundantIntf: s1
        redundantMode: enable
        sim1Pin: disable
        sim1PinCode: testpincode
        sim2Pin: disable
      modem2:
        autoSwitch:
          dataplan: disable
          disconnect: disable
          disconnectPeriod: 600
          disconnectThreshold: 3
          signal: disable
          switchBackTime: 00:01
          switchBackTimer: 86400
        connStatus: 0
        defaultSim: sim1
        gps: enable
        redundantMode: disable
        sim1Pin: disable
        sim2Pin: disable
      vdom: 0

Create Extender1 Resource

Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

Constructor syntax

new Extender1(name: string, args: Extender1Args, opts?: CustomResourceOptions);

@overload
def Extender1(resource_name: str,
              args: Extender1Args,
              opts: Optional[ResourceOptions] = None)

@overload
def Extender1(resource_name: str,
              opts: Optional[ResourceOptions] = None,
              authorized: Optional[str] = None,
              controller_report: Optional[Extender1ControllerReportArgs] = None,
              description: Optional[str] = None,
              ext_name: Optional[str] = None,
              fosid: Optional[str] = None,
              get_all_tables: Optional[str] = None,
              login_password: Optional[str] = None,
              modem1: Optional[Extender1Modem1Args] = None,
              modem2: Optional[Extender1Modem2Args] = None,
              name: Optional[str] = None,
              vdom: Optional[int] = None,
              vdomparam: Optional[str] = None)

func NewExtender1(ctx *Context, name string, args Extender1Args, opts ...ResourceOption) (*Extender1, error)

public Extender1(string name, Extender1Args args, CustomResourceOptions? opts = null)

public Extender1(String name, Extender1Args args)
public Extender1(String name, Extender1Args args, CustomResourceOptions options)

type: fortios:extendercontroller:Extender1
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

Parameters

name string: The unique name of the resource.
args Extender1Args: The arguments to resource properties.
opts CustomResourceOptions: Bag of options to control resource's behavior.

resource_name str: The unique name of the resource.
args Extender1Args: The arguments to resource properties.
opts ResourceOptions: Bag of options to control resource's behavior.

ctx Context: Context object for the current deployment.
name string: The unique name of the resource.
args Extender1Args: The arguments to resource properties.
opts ResourceOption: Bag of options to control resource's behavior.

name string: The unique name of the resource.
args Extender1Args: The arguments to resource properties.
opts CustomResourceOptions: Bag of options to control resource's behavior.

name String: The unique name of the resource.
args Extender1Args: The arguments to resource properties.
options CustomResourceOptions: Bag of options to control resource's behavior.

Constructor example

The following reference example uses placeholder values for all input properties.

var extender1Resource = new Fortios.Extendercontroller.Extender1("extender1Resource", new()
{
    Authorized = "string",
    ControllerReport = new Fortios.Extendercontroller.Inputs.Extender1ControllerReportArgs
    {
        Interval = 0,
        SignalThreshold = 0,
        Status = "string",
    },
    Description = "string",
    ExtName = "string",
    Fosid = "string",
    GetAllTables = "string",
    LoginPassword = "string",
    Modem1 = new Fortios.Extendercontroller.Inputs.Extender1Modem1Args
    {
        AutoSwitch = new Fortios.Extendercontroller.Inputs.Extender1Modem1AutoSwitchArgs
        {
            Dataplan = "string",
            Disconnect = "string",
            DisconnectPeriod = 0,
            DisconnectThreshold = 0,
            Signal = "string",
            SwitchBack = "string",
            SwitchBackTime = "string",
            SwitchBackTimer = 0,
        },
        ConnStatus = 0,
        DefaultSim = "string",
        Gps = "string",
        Ifname = "string",
        PreferredCarrier = "string",
        RedundantIntf = "string",
        RedundantMode = "string",
        Sim1Pin = "string",
        Sim1PinCode = "string",
        Sim2Pin = "string",
        Sim2PinCode = "string",
    },
    Modem2 = new Fortios.Extendercontroller.Inputs.Extender1Modem2Args
    {
        AutoSwitch = new Fortios.Extendercontroller.Inputs.Extender1Modem2AutoSwitchArgs
        {
            Dataplan = "string",
            Disconnect = "string",
            DisconnectPeriod = 0,
            DisconnectThreshold = 0,
            Signal = "string",
            SwitchBack = "string",
            SwitchBackTime = "string",
            SwitchBackTimer = 0,
        },
        ConnStatus = 0,
        DefaultSim = "string",
        Gps = "string",
        Ifname = "string",
        PreferredCarrier = "string",
        RedundantIntf = "string",
        RedundantMode = "string",
        Sim1Pin = "string",
        Sim1PinCode = "string",
        Sim2Pin = "string",
        Sim2PinCode = "string",
    },
    Name = "string",
    Vdom = 0,
    Vdomparam = "string",
});

example, err := extendercontroller.NewExtender1(ctx, "extender1Resource", &extendercontroller.Extender1Args{
	Authorized: pulumi.String("string"),
	ControllerReport: &extendercontroller.Extender1ControllerReportArgs{
		Interval:        pulumi.Int(0),
		SignalThreshold: pulumi.Int(0),
		Status:          pulumi.String("string"),
	},
	Description:   pulumi.String("string"),
	ExtName:       pulumi.String("string"),
	Fosid:         pulumi.String("string"),
	GetAllTables:  pulumi.String("string"),
	LoginPassword: pulumi.String("string"),
	Modem1: &extendercontroller.Extender1Modem1Args{
		AutoSwitch: &extendercontroller.Extender1Modem1AutoSwitchArgs{
			Dataplan:            pulumi.String("string"),
			Disconnect:          pulumi.String("string"),
			DisconnectPeriod:    pulumi.Int(0),
			DisconnectThreshold: pulumi.Int(0),
			Signal:              pulumi.String("string"),
			SwitchBack:          pulumi.String("string"),
			SwitchBackTime:      pulumi.String("string"),
			SwitchBackTimer:     pulumi.Int(0),
		},
		ConnStatus:       pulumi.Int(0),
		DefaultSim:       pulumi.String("string"),
		Gps:              pulumi.String("string"),
		Ifname:           pulumi.String("string"),
		PreferredCarrier: pulumi.String("string"),
		RedundantIntf:    pulumi.String("string"),
		RedundantMode:    pulumi.String("string"),
		Sim1Pin:          pulumi.String("string"),
		Sim1PinCode:      pulumi.String("string"),
		Sim2Pin:          pulumi.String("string"),
		Sim2PinCode:      pulumi.String("string"),
	},
	Modem2: &extendercontroller.Extender1Modem2Args{
		AutoSwitch: &extendercontroller.Extender1Modem2AutoSwitchArgs{
			Dataplan:            pulumi.String("string"),
			Disconnect:          pulumi.String("string"),
			DisconnectPeriod:    pulumi.Int(0),
			DisconnectThreshold: pulumi.Int(0),
			Signal:              pulumi.String("string"),
			SwitchBack:          pulumi.String("string"),
			SwitchBackTime:      pulumi.String("string"),
			SwitchBackTimer:     pulumi.Int(0),
		},
		ConnStatus:       pulumi.Int(0),
		DefaultSim:       pulumi.String("string"),
		Gps:              pulumi.String("string"),
		Ifname:           pulumi.String("string"),
		PreferredCarrier: pulumi.String("string"),
		RedundantIntf:    pulumi.String("string"),
		RedundantMode:    pulumi.String("string"),
		Sim1Pin:          pulumi.String("string"),
		Sim1PinCode:      pulumi.String("string"),
		Sim2Pin:          pulumi.String("string"),
		Sim2PinCode:      pulumi.String("string"),
	},
	Name:      pulumi.String("string"),
	Vdom:      pulumi.Int(0),
	Vdomparam: pulumi.String("string"),
})

var extender1Resource = new Extender1("extender1Resource", Extender1Args.builder()
    .authorized("string")
    .controllerReport(Extender1ControllerReportArgs.builder()
        .interval(0)
        .signalThreshold(0)
        .status("string")
        .build())
    .description("string")
    .extName("string")
    .fosid("string")
    .getAllTables("string")
    .loginPassword("string")
    .modem1(Extender1Modem1Args.builder()
        .autoSwitch(Extender1Modem1AutoSwitchArgs.builder()
            .dataplan("string")
            .disconnect("string")
            .disconnectPeriod(0)
            .disconnectThreshold(0)
            .signal("string")
            .switchBack("string")
            .switchBackTime("string")
            .switchBackTimer(0)
            .build())
        .connStatus(0)
        .defaultSim("string")
        .gps("string")
        .ifname("string")
        .preferredCarrier("string")
        .redundantIntf("string")
        .redundantMode("string")
        .sim1Pin("string")
        .sim1PinCode("string")
        .sim2Pin("string")
        .sim2PinCode("string")
        .build())
    .modem2(Extender1Modem2Args.builder()
        .autoSwitch(Extender1Modem2AutoSwitchArgs.builder()
            .dataplan("string")
            .disconnect("string")
            .disconnectPeriod(0)
            .disconnectThreshold(0)
            .signal("string")
            .switchBack("string")
            .switchBackTime("string")
            .switchBackTimer(0)
            .build())
        .connStatus(0)
        .defaultSim("string")
        .gps("string")
        .ifname("string")
        .preferredCarrier("string")
        .redundantIntf("string")
        .redundantMode("string")
        .sim1Pin("string")
        .sim1PinCode("string")
        .sim2Pin("string")
        .sim2PinCode("string")
        .build())
    .name("string")
    .vdom(0)
    .vdomparam("string")
    .build());

extender1_resource = fortios.extendercontroller.Extender1("extender1Resource",
    authorized="string",
    controller_report={
        "interval": 0,
        "signal_threshold": 0,
        "status": "string",
    },
    description="string",
    ext_name="string",
    fosid="string",
    get_all_tables="string",
    login_password="string",
    modem1={
        "auto_switch": {
            "dataplan": "string",
            "disconnect": "string",
            "disconnect_period": 0,
            "disconnect_threshold": 0,
            "signal": "string",
            "switch_back": "string",
            "switch_back_time": "string",
            "switch_back_timer": 0,
        },
        "conn_status": 0,
        "default_sim": "string",
        "gps": "string",
        "ifname": "string",
        "preferred_carrier": "string",
        "redundant_intf": "string",
        "redundant_mode": "string",
        "sim1_pin": "string",
        "sim1_pin_code": "string",
        "sim2_pin": "string",
        "sim2_pin_code": "string",
    },
    modem2={
        "auto_switch": {
            "dataplan": "string",
            "disconnect": "string",
            "disconnect_period": 0,
            "disconnect_threshold": 0,
            "signal": "string",
            "switch_back": "string",
            "switch_back_time": "string",
            "switch_back_timer": 0,
        },
        "conn_status": 0,
        "default_sim": "string",
        "gps": "string",
        "ifname": "string",
        "preferred_carrier": "string",
        "redundant_intf": "string",
        "redundant_mode": "string",
        "sim1_pin": "string",
        "sim1_pin_code": "string",
        "sim2_pin": "string",
        "sim2_pin_code": "string",
    },
    name="string",
    vdom=0,
    vdomparam="string")

const extender1Resource = new fortios.extendercontroller.Extender1("extender1Resource", {
    authorized: "string",
    controllerReport: {
        interval: 0,
        signalThreshold: 0,
        status: "string",
    },
    description: "string",
    extName: "string",
    fosid: "string",
    getAllTables: "string",
    loginPassword: "string",
    modem1: {
        autoSwitch: {
            dataplan: "string",
            disconnect: "string",
            disconnectPeriod: 0,
            disconnectThreshold: 0,
            signal: "string",
            switchBack: "string",
            switchBackTime: "string",
            switchBackTimer: 0,
        },
        connStatus: 0,
        defaultSim: "string",
        gps: "string",
        ifname: "string",
        preferredCarrier: "string",
        redundantIntf: "string",
        redundantMode: "string",
        sim1Pin: "string",
        sim1PinCode: "string",
        sim2Pin: "string",
        sim2PinCode: "string",
    },
    modem2: {
        autoSwitch: {
            dataplan: "string",
            disconnect: "string",
            disconnectPeriod: 0,
            disconnectThreshold: 0,
            signal: "string",
            switchBack: "string",
            switchBackTime: "string",
            switchBackTimer: 0,
        },
        connStatus: 0,
        defaultSim: "string",
        gps: "string",
        ifname: "string",
        preferredCarrier: "string",
        redundantIntf: "string",
        redundantMode: "string",
        sim1Pin: "string",
        sim1PinCode: "string",
        sim2Pin: "string",
        sim2PinCode: "string",
    },
    name: "string",
    vdom: 0,
    vdomparam: "string",
});

type: fortios:extendercontroller:Extender1
properties:
    authorized: string
    controllerReport:
        interval: 0
        signalThreshold: 0
        status: string
    description: string
    extName: string
    fosid: string
    getAllTables: string
    loginPassword: string
    modem1:
        autoSwitch:
            dataplan: string
            disconnect: string
            disconnectPeriod: 0
            disconnectThreshold: 0
            signal: string
            switchBack: string
            switchBackTime: string
            switchBackTimer: 0
        connStatus: 0
        defaultSim: string
        gps: string
        ifname: string
        preferredCarrier: string
        redundantIntf: string
        redundantMode: string
        sim1Pin: string
        sim1PinCode: string
        sim2Pin: string
        sim2PinCode: string
    modem2:
        autoSwitch:
            dataplan: string
            disconnect: string
            disconnectPeriod: 0
            disconnectThreshold: 0
            signal: string
            switchBack: string
            switchBackTime: string
            switchBackTimer: 0
        connStatus: 0
        defaultSim: string
        gps: string
        ifname: string
        preferredCarrier: string
        redundantIntf: string
        redundantMode: string
        sim1Pin: string
        sim1PinCode: string
        sim2Pin: string
        sim2PinCode: string
    name: string
    vdom: 0
    vdomparam: string

Extender1 Resource Properties

To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

Inputs

In Python, inputs that are objects can be passed either as argument classes or as dictionary literals.

The Extender1 resource accepts the following input properties:

Authorized string: FortiExtender Administration (enable or disable). Valid values: disable, enable.
ControllerReport Pulumiverse.Fortios.Extendercontroller.Inputs.Extender1ControllerReport: FortiExtender controller report configuration. The structure of controller_report block is documented below.
Description string: Description.
ExtName string: FortiExtender name.
Fosid string: FortiExtender serial number.
GetAllTables string: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
LoginPassword string: FortiExtender login password.
Modem1 Pulumiverse.Fortios.Extendercontroller.Inputs.Extender1Modem1: Configuration options for modem 1. The structure of modem1 block is documented below.
Modem2 Pulumiverse.Fortios.Extendercontroller.Inputs.Extender1Modem2: Configuration options for modem 2. The structure of modem2 block is documented below.
Name string: FortiExtender entry name.
Vdom int: VDOM
Vdomparam string: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

Authorized string: FortiExtender Administration (enable or disable). Valid values: disable, enable.
ControllerReport Extender1ControllerReportArgs: FortiExtender controller report configuration. The structure of controller_report block is documented below.
Description string: Description.
ExtName string: FortiExtender name.
Fosid string: FortiExtender serial number.
GetAllTables string: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
LoginPassword string: FortiExtender login password.
Modem1 Extender1Modem1Args: Configuration options for modem 1. The structure of modem1 block is documented below.
Modem2 Extender1Modem2Args: Configuration options for modem 2. The structure of modem2 block is documented below.
Name string: FortiExtender entry name.
Vdom int: VDOM
Vdomparam string: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

authorized String: FortiExtender Administration (enable or disable). Valid values: disable, enable.
controllerReport Extender1ControllerReport: FortiExtender controller report configuration. The structure of controller_report block is documented below.
description String: Description.
extName String: FortiExtender name.
fosid String: FortiExtender serial number.
getAllTables String: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
loginPassword String: FortiExtender login password.
modem1 Extender1Modem1: Configuration options for modem 1. The structure of modem1 block is documented below.
modem2 Extender1Modem2: Configuration options for modem 2. The structure of modem2 block is documented below.
name String: FortiExtender entry name.
vdom Integer: VDOM
vdomparam String: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

authorized string: FortiExtender Administration (enable or disable). Valid values: disable, enable.
controllerReport Extender1ControllerReport: FortiExtender controller report configuration. The structure of controller_report block is documented below.
description string: Description.
extName string: FortiExtender name.
fosid string: FortiExtender serial number.
getAllTables string: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
loginPassword string: FortiExtender login password.
modem1 Extender1Modem1: Configuration options for modem 1. The structure of modem1 block is documented below.
modem2 Extender1Modem2: Configuration options for modem 2. The structure of modem2 block is documented below.
name string: FortiExtender entry name.
vdom number: VDOM
vdomparam string: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

authorized str: FortiExtender Administration (enable or disable). Valid values: disable, enable.
controller_report Extender1ControllerReportArgs: FortiExtender controller report configuration. The structure of controller_report block is documented below.
description str: Description.
ext_name str: FortiExtender name.
fosid str: FortiExtender serial number.
get_all_tables str: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
login_password str: FortiExtender login password.
modem1 Extender1Modem1Args: Configuration options for modem 1. The structure of modem1 block is documented below.
modem2 Extender1Modem2Args: Configuration options for modem 2. The structure of modem2 block is documented below.
name str: FortiExtender entry name.
vdom int: VDOM
vdomparam str: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

authorized String: FortiExtender Administration (enable or disable). Valid values: disable, enable.
controllerReport Property Map: FortiExtender controller report configuration. The structure of controller_report block is documented below.
description String: Description.
extName String: FortiExtender name.
fosid String: FortiExtender serial number.
getAllTables String: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
loginPassword String: FortiExtender login password.
modem1 Property Map: Configuration options for modem 1. The structure of modem1 block is documented below.
modem2 Property Map: Configuration options for modem 2. The structure of modem2 block is documented below.
name String: FortiExtender entry name.
vdom Number: VDOM
vdomparam String: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

Outputs

All input properties are implicitly available as output properties. Additionally, the Extender1 resource produces the following output properties:

Id string: The provider-assigned unique ID for this managed resource.

Id string: The provider-assigned unique ID for this managed resource.

id String: The provider-assigned unique ID for this managed resource.

id string: The provider-assigned unique ID for this managed resource.

id str: The provider-assigned unique ID for this managed resource.

id String: The provider-assigned unique ID for this managed resource.

Look up Existing Extender1 Resource

Get an existing Extender1 resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

public static get(name: string, id: Input<ID>, state?: Extender1State, opts?: CustomResourceOptions): Extender1

@staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        authorized: Optional[str] = None,
        controller_report: Optional[Extender1ControllerReportArgs] = None,
        description: Optional[str] = None,
        ext_name: Optional[str] = None,
        fosid: Optional[str] = None,
        get_all_tables: Optional[str] = None,
        login_password: Optional[str] = None,
        modem1: Optional[Extender1Modem1Args] = None,
        modem2: Optional[Extender1Modem2Args] = None,
        name: Optional[str] = None,
        vdom: Optional[int] = None,
        vdomparam: Optional[str] = None) -> Extender1

func GetExtender1(ctx *Context, name string, id IDInput, state *Extender1State, opts ...ResourceOption) (*Extender1, error)

public static Extender1 Get(string name, Input<string> id, Extender1State? state, CustomResourceOptions? opts = null)

public static Extender1 get(String name, Output<String> id, Extender1State state, CustomResourceOptions options)

Resource lookup is not supported in YAML

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

resource_name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

name: The unique name of the resulting resource.
id: The unique provider ID of the resource to lookup.
state: Any extra arguments used during the lookup.
opts: A bag of options that control this resource's behavior.

The following state arguments are supported:

Authorized string: FortiExtender Administration (enable or disable). Valid values: disable, enable.
ControllerReport Pulumiverse.Fortios.Extendercontroller.Inputs.Extender1ControllerReport: FortiExtender controller report configuration. The structure of controller_report block is documented below.
Description string: Description.
ExtName string: FortiExtender name.
Fosid string: FortiExtender serial number.
GetAllTables string: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
LoginPassword string: FortiExtender login password.
Modem1 Pulumiverse.Fortios.Extendercontroller.Inputs.Extender1Modem1: Configuration options for modem 1. The structure of modem1 block is documented below.
Modem2 Pulumiverse.Fortios.Extendercontroller.Inputs.Extender1Modem2: Configuration options for modem 2. The structure of modem2 block is documented below.
Name string: FortiExtender entry name.
Vdom int: VDOM
Vdomparam string: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

Authorized string: FortiExtender Administration (enable or disable). Valid values: disable, enable.
ControllerReport Extender1ControllerReportArgs: FortiExtender controller report configuration. The structure of controller_report block is documented below.
Description string: Description.
ExtName string: FortiExtender name.
Fosid string: FortiExtender serial number.
GetAllTables string: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
LoginPassword string: FortiExtender login password.
Modem1 Extender1Modem1Args: Configuration options for modem 1. The structure of modem1 block is documented below.
Modem2 Extender1Modem2Args: Configuration options for modem 2. The structure of modem2 block is documented below.
Name string: FortiExtender entry name.
Vdom int: VDOM
Vdomparam string: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

authorized String: FortiExtender Administration (enable or disable). Valid values: disable, enable.
controllerReport Extender1ControllerReport: FortiExtender controller report configuration. The structure of controller_report block is documented below.
description String: Description.
extName String: FortiExtender name.
fosid String: FortiExtender serial number.
getAllTables String: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
loginPassword String: FortiExtender login password.
modem1 Extender1Modem1: Configuration options for modem 1. The structure of modem1 block is documented below.
modem2 Extender1Modem2: Configuration options for modem 2. The structure of modem2 block is documented below.
name String: FortiExtender entry name.
vdom Integer: VDOM
vdomparam String: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

authorized string: FortiExtender Administration (enable or disable). Valid values: disable, enable.
controllerReport Extender1ControllerReport: FortiExtender controller report configuration. The structure of controller_report block is documented below.
description string: Description.
extName string: FortiExtender name.
fosid string: FortiExtender serial number.
getAllTables string: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
loginPassword string: FortiExtender login password.
modem1 Extender1Modem1: Configuration options for modem 1. The structure of modem1 block is documented below.
modem2 Extender1Modem2: Configuration options for modem 2. The structure of modem2 block is documented below.
name string: FortiExtender entry name.
vdom number: VDOM
vdomparam string: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

authorized str: FortiExtender Administration (enable or disable). Valid values: disable, enable.
controller_report Extender1ControllerReportArgs: FortiExtender controller report configuration. The structure of controller_report block is documented below.
description str: Description.
ext_name str: FortiExtender name.
fosid str: FortiExtender serial number.
get_all_tables str: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
login_password str: FortiExtender login password.
modem1 Extender1Modem1Args: Configuration options for modem 1. The structure of modem1 block is documented below.
modem2 Extender1Modem2Args: Configuration options for modem 2. The structure of modem2 block is documented below.
name str: FortiExtender entry name.
vdom int: VDOM
vdomparam str: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

authorized String: FortiExtender Administration (enable or disable). Valid values: disable, enable.
controllerReport Property Map: FortiExtender controller report configuration. The structure of controller_report block is documented below.
description String: Description.
extName String: FortiExtender name.
fosid String: FortiExtender serial number.
getAllTables String: Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
loginPassword String: FortiExtender login password.
modem1 Property Map: Configuration options for modem 1. The structure of modem1 block is documented below.
modem2 Property Map: Configuration options for modem 2. The structure of modem2 block is documented below.
name String: FortiExtender entry name.
vdom Number: VDOM
vdomparam String: Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

Supporting Types

Extender1ControllerReport, Extender1ControllerReportArgs

Interval int

Controller report interval.

SignalThreshold int

Controller report signal threshold.

The modem1 block supports:

Status string

FortiExtender controller report status. Valid values: disable, enable.

Interval int

Controller report interval.

SignalThreshold int

Controller report signal threshold.

The modem1 block supports:

Status string

FortiExtender controller report status. Valid values: disable, enable.

interval Integer

Controller report interval.

signalThreshold Integer

Controller report signal threshold.

The modem1 block supports:

status String

FortiExtender controller report status. Valid values: disable, enable.

interval number

Controller report interval.

signalThreshold number

Controller report signal threshold.

The modem1 block supports:

status string

FortiExtender controller report status. Valid values: disable, enable.

interval int

Controller report interval.

signal_threshold int

Controller report signal threshold.

The modem1 block supports:

status str

FortiExtender controller report status. Valid values: disable, enable.

interval Number

Controller report interval.

signalThreshold Number

Controller report signal threshold.

The modem1 block supports:

status String

FortiExtender controller report status. Valid values: disable, enable.

Extender1Modem1, Extender1Modem1Args

AutoSwitch Pulumiverse.Fortios.Extendercontroller.Inputs.Extender1Modem1AutoSwitch
ConnStatus int
DefaultSim string
Gps string
Ifname string
PreferredCarrier string
RedundantIntf string
RedundantMode string
Sim1Pin string
Sim1PinCode string
Sim2Pin string
Sim2PinCode string

AutoSwitch Extender1Modem1AutoSwitch
ConnStatus int
DefaultSim string
Gps string
Ifname string
PreferredCarrier string
RedundantIntf string
RedundantMode string
Sim1Pin string
Sim1PinCode string
Sim2Pin string
Sim2PinCode string

autoSwitch Extender1Modem1AutoSwitch
connStatus Integer
defaultSim String
gps String
ifname String
preferredCarrier String
redundantIntf String
redundantMode String
sim1Pin String
sim1PinCode String
sim2Pin String
sim2PinCode String

autoSwitch Extender1Modem1AutoSwitch
connStatus number
defaultSim string
gps string
ifname string
preferredCarrier string
redundantIntf string
redundantMode string
sim1Pin string
sim1PinCode string
sim2Pin string
sim2PinCode string

auto_switch Extender1Modem1AutoSwitch
conn_status int
default_sim str
gps str
ifname str
preferred_carrier str
redundant_intf str
redundant_mode str
sim1_pin str
sim1_pin_code str
sim2_pin str
sim2_pin_code str

autoSwitch Property Map
connStatus Number
defaultSim String
gps String
ifname String
preferredCarrier String
redundantIntf String
redundantMode String
sim1Pin String
sim1PinCode String
sim2Pin String
sim2PinCode String

Extender1Modem1AutoSwitch, Extender1Modem1AutoSwitchArgs

Dataplan string: Automatically switch based on data usage. Valid values: disable, enable.
Disconnect string: Auto switch by disconnect. Valid values: disable, enable.
DisconnectPeriod int: Automatically switch based on disconnect period.
DisconnectThreshold int: Automatically switch based on disconnect threshold.
Signal string: Automatically switch based on signal strength. Valid values: disable, enable.
SwitchBack string: Auto switch with switch back multi-options. Valid values: time, timer.
SwitchBackTime string: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
SwitchBackTimer int: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

Dataplan string: Automatically switch based on data usage. Valid values: disable, enable.
Disconnect string: Auto switch by disconnect. Valid values: disable, enable.
DisconnectPeriod int: Automatically switch based on disconnect period.
DisconnectThreshold int: Automatically switch based on disconnect threshold.
Signal string: Automatically switch based on signal strength. Valid values: disable, enable.
SwitchBack string: Auto switch with switch back multi-options. Valid values: time, timer.
SwitchBackTime string: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
SwitchBackTimer int: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

dataplan String: Automatically switch based on data usage. Valid values: disable, enable.
disconnect String: Auto switch by disconnect. Valid values: disable, enable.
disconnectPeriod Integer: Automatically switch based on disconnect period.
disconnectThreshold Integer: Automatically switch based on disconnect threshold.
signal String: Automatically switch based on signal strength. Valid values: disable, enable.
switchBack String: Auto switch with switch back multi-options. Valid values: time, timer.
switchBackTime String: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switchBackTimer Integer: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

dataplan string: Automatically switch based on data usage. Valid values: disable, enable.
disconnect string: Auto switch by disconnect. Valid values: disable, enable.
disconnectPeriod number: Automatically switch based on disconnect period.
disconnectThreshold number: Automatically switch based on disconnect threshold.
signal string: Automatically switch based on signal strength. Valid values: disable, enable.
switchBack string: Auto switch with switch back multi-options. Valid values: time, timer.
switchBackTime string: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switchBackTimer number: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

dataplan str: Automatically switch based on data usage. Valid values: disable, enable.
disconnect str: Auto switch by disconnect. Valid values: disable, enable.
disconnect_period int: Automatically switch based on disconnect period.
disconnect_threshold int: Automatically switch based on disconnect threshold.
signal str: Automatically switch based on signal strength. Valid values: disable, enable.
switch_back str: Auto switch with switch back multi-options. Valid values: time, timer.
switch_back_time str: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switch_back_timer int: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

dataplan String: Automatically switch based on data usage. Valid values: disable, enable.
disconnect String: Auto switch by disconnect. Valid values: disable, enable.
disconnectPeriod Number: Automatically switch based on disconnect period.
disconnectThreshold Number: Automatically switch based on disconnect threshold.
signal String: Automatically switch based on signal strength. Valid values: disable, enable.
switchBack String: Auto switch with switch back multi-options. Valid values: time, timer.
switchBackTime String: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switchBackTimer Number: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

Extender1Modem2, Extender1Modem2Args

AutoSwitch Pulumiverse.Fortios.Extendercontroller.Inputs.Extender1Modem2AutoSwitch
ConnStatus int
DefaultSim string
Gps string
Ifname string
PreferredCarrier string
RedundantIntf string
RedundantMode string
Sim1Pin string
Sim1PinCode string
Sim2Pin string
Sim2PinCode string

AutoSwitch Extender1Modem2AutoSwitch
ConnStatus int
DefaultSim string
Gps string
Ifname string
PreferredCarrier string
RedundantIntf string
RedundantMode string
Sim1Pin string
Sim1PinCode string
Sim2Pin string
Sim2PinCode string

autoSwitch Extender1Modem2AutoSwitch
connStatus Integer
defaultSim String
gps String
ifname String
preferredCarrier String
redundantIntf String
redundantMode String
sim1Pin String
sim1PinCode String
sim2Pin String
sim2PinCode String

autoSwitch Extender1Modem2AutoSwitch
connStatus number
defaultSim string
gps string
ifname string
preferredCarrier string
redundantIntf string
redundantMode string
sim1Pin string
sim1PinCode string
sim2Pin string
sim2PinCode string

auto_switch Extender1Modem2AutoSwitch
conn_status int
default_sim str
gps str
ifname str
preferred_carrier str
redundant_intf str
redundant_mode str
sim1_pin str
sim1_pin_code str
sim2_pin str
sim2_pin_code str

autoSwitch Property Map
connStatus Number
defaultSim String
gps String
ifname String
preferredCarrier String
redundantIntf String
redundantMode String
sim1Pin String
sim1PinCode String
sim2Pin String
sim2PinCode String

Extender1Modem2AutoSwitch, Extender1Modem2AutoSwitchArgs

Dataplan string: Automatically switch based on data usage. Valid values: disable, enable.
Disconnect string: Auto switch by disconnect. Valid values: disable, enable.
DisconnectPeriod int: Automatically switch based on disconnect period.
DisconnectThreshold int: Automatically switch based on disconnect threshold.
Signal string: Automatically switch based on signal strength. Valid values: disable, enable.
SwitchBack string: Auto switch with switch back multi-options. Valid values: time, timer.
SwitchBackTime string: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
SwitchBackTimer int: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

Dataplan string: Automatically switch based on data usage. Valid values: disable, enable.
Disconnect string: Auto switch by disconnect. Valid values: disable, enable.
DisconnectPeriod int: Automatically switch based on disconnect period.
DisconnectThreshold int: Automatically switch based on disconnect threshold.
Signal string: Automatically switch based on signal strength. Valid values: disable, enable.
SwitchBack string: Auto switch with switch back multi-options. Valid values: time, timer.
SwitchBackTime string: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
SwitchBackTimer int: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

dataplan String: Automatically switch based on data usage. Valid values: disable, enable.
disconnect String: Auto switch by disconnect. Valid values: disable, enable.
disconnectPeriod Integer: Automatically switch based on disconnect period.
disconnectThreshold Integer: Automatically switch based on disconnect threshold.
signal String: Automatically switch based on signal strength. Valid values: disable, enable.
switchBack String: Auto switch with switch back multi-options. Valid values: time, timer.
switchBackTime String: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switchBackTimer Integer: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

dataplan string: Automatically switch based on data usage. Valid values: disable, enable.
disconnect string: Auto switch by disconnect. Valid values: disable, enable.
disconnectPeriod number: Automatically switch based on disconnect period.
disconnectThreshold number: Automatically switch based on disconnect threshold.
signal string: Automatically switch based on signal strength. Valid values: disable, enable.
switchBack string: Auto switch with switch back multi-options. Valid values: time, timer.
switchBackTime string: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switchBackTimer number: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

dataplan str: Automatically switch based on data usage. Valid values: disable, enable.
disconnect str: Auto switch by disconnect. Valid values: disable, enable.
disconnect_period int: Automatically switch based on disconnect period.
disconnect_threshold int: Automatically switch based on disconnect threshold.
signal str: Automatically switch based on signal strength. Valid values: disable, enable.
switch_back str: Auto switch with switch back multi-options. Valid values: time, timer.
switch_back_time str: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switch_back_timer int: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

dataplan String: Automatically switch based on data usage. Valid values: disable, enable.
disconnect String: Auto switch by disconnect. Valid values: disable, enable.
disconnectPeriod Number: Automatically switch based on disconnect period.
disconnectThreshold Number: Automatically switch based on disconnect threshold.
signal String: Automatically switch based on signal strength. Valid values: disable, enable.
switchBack String: Auto switch with switch back multi-options. Valid values: time, timer.
switchBackTime String: Automatically switch over to preferred SIM/carrier at a specified time in UTC (HH:MM).
switchBackTimer Number: Automatically switch over to preferred SIM/carrier after the given time (3600 - 2147483647 sec).

Import

ExtenderController Extender1 can be imported using any of these accepted formats:

$ pulumi import fortios:extendercontroller/extender1:Extender1 labelname {{name}}

If you do not want to import arguments of block:

$ export “FORTIOS_IMPORT_TABLE”=“false”

$ pulumi import fortios:extendercontroller/extender1:Extender1 labelname {{name}}

$ unset “FORTIOS_IMPORT_TABLE”

To learn more about importing existing cloud resources, see Importing resources.

Package Details

Repository: fortios pulumiverse/pulumi-fortios
License: Apache-2.0
Notes: This Pulumi package is based on the fortios Terraform Provider.

Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse

pulumiverse/pulumi-fortios

fortios.extendercontroller.Extender1

On this page

On this page

Example Usage

Create Extender1 Resource

Constructor syntax

Parameters

Constructor example

Extender1 Resource Properties

Inputs

Outputs

Look up Existing Extender1 Resource

Supporting Types

Extender1ControllerReport, Extender1ControllerReportArgs

Extender1Modem1, Extender1Modem1Args

Extender1Modem1AutoSwitch, Extender1Modem1AutoSwitchArgs

Extender1Modem2, Extender1Modem2Args

Extender1Modem2AutoSwitch, Extender1Modem2AutoSwitchArgs

Import

Package Details

On this page

On this page