Docs Home
AWS v6.60.0 published on Tuesday, Nov 19, 2024 by Pulumi
aws.codebuild.Project
Explore with Pulumi AI
Provides a CodeBuild Project resource. See also the aws.codebuild.Webhook resource, which manages the webhook to the source (e.g., the “rebuild every time a code change is pushed” option in the CodeBuild web console).
Example Usage
import * as pulumi from "@pulumi/pulumi";
import * as aws from "@pulumi/aws";
const exampleBucketV2 = new aws.s3.BucketV2("example", {bucket: "example"});
const exampleBucketAclV2 = new aws.s3.BucketAclV2("example", {
bucket: exampleBucketV2.id,
acl: "private",
});
const assumeRole = aws.iam.getPolicyDocument({
statements: [{
effect: "Allow",
principals: [{
type: "Service",
identifiers: ["codebuild.amazonaws.com"],
}],
actions: ["sts:AssumeRole"],
}],
});
const exampleRole = new aws.iam.Role("example", {
name: "example",
assumeRolePolicy: assumeRole.then(assumeRole => assumeRole.json),
});
const example = pulumi.all([exampleBucketV2.arn, exampleBucketV2.arn]).apply(([exampleBucketV2Arn, exampleBucketV2Arn1]) => aws.iam.getPolicyDocumentOutput({
statements: [
{
effect: "Allow",
actions: [
"logs:CreateLogGroup",
"logs:CreateLogStream",
"logs:PutLogEvents",
],
resources: ["*"],
},
{
effect: "Allow",
actions: [
"ec2:CreateNetworkInterface",
"ec2:DescribeDhcpOptions",
"ec2:DescribeNetworkInterfaces",
"ec2:DeleteNetworkInterface",
"ec2:DescribeSubnets",
"ec2:DescribeSecurityGroups",
"ec2:DescribeVpcs",
],
resources: ["*"],
},
{
effect: "Allow",
actions: ["ec2:CreateNetworkInterfacePermission"],
resources: ["arn:aws:ec2:us-east-1:123456789012:network-interface/*"],
conditions: [
{
test: "StringEquals",
variable: "ec2:Subnet",
values: [
example1.arn,
example2.arn,
],
},
{
test: "StringEquals",
variable: "ec2:AuthorizedService",
values: ["codebuild.amazonaws.com"],
},
],
},
{
effect: "Allow",
actions: ["s3:*"],
resources: [
exampleBucketV2Arn,
`${exampleBucketV2Arn1}/*`,
],
},
],
}));
const exampleRolePolicy = new aws.iam.RolePolicy("example", {
role: exampleRole.name,
policy: example.apply(example => example.json),
});
const exampleProject = new aws.codebuild.Project("example", {
name: "test-project",
description: "test_codebuild_project",
buildTimeout: 5,
serviceRole: exampleRole.arn,
artifacts: {
type: "NO_ARTIFACTS",
},
cache: {
type: "S3",
location: exampleBucketV2.bucket,
},
environment: {
computeType: "BUILD_GENERAL1_SMALL",
image: "aws/codebuild/amazonlinux2-x86_64-standard:4.0",
type: "LINUX_CONTAINER",
imagePullCredentialsType: "CODEBUILD",
environmentVariables: [
{
name: "SOME_KEY1",
value: "SOME_VALUE1",
},
{
name: "SOME_KEY2",
value: "SOME_VALUE2",
type: "PARAMETER_STORE",
},
],
},
logsConfig: {
cloudwatchLogs: {
groupName: "log-group",
streamName: "log-stream",
},
s3Logs: {
status: "ENABLED",
location: pulumi.interpolate`${exampleBucketV2.id}/build-log`,
},
},
source: {
type: "GITHUB",
location: "https://github.com/mitchellh/packer.git",
gitCloneDepth: 1,
gitSubmodulesConfig: {
fetchSubmodules: true,
},
},
sourceVersion: "master",
vpcConfig: {
vpcId: exampleAwsVpc.id,
subnets: [
example1.id,
example2.id,
],
securityGroupIds: [
example1AwsSecurityGroup.id,
example2AwsSecurityGroup.id,
],
},
tags: {
Environment: "Test",
},
});
const project_with_cache = new aws.codebuild.Project("project-with-cache", {
name: "test-project-cache",
description: "test_codebuild_project_cache",
buildTimeout: 5,
queuedTimeout: 5,
serviceRole: exampleRole.arn,
artifacts: {
type: "NO_ARTIFACTS",
},
cache: {
type: "LOCAL",
modes: [
"LOCAL_DOCKER_LAYER_CACHE",
"LOCAL_SOURCE_CACHE",
],
},
environment: {
computeType: "BUILD_GENERAL1_SMALL",
image: "aws/codebuild/amazonlinux2-x86_64-standard:4.0",
type: "LINUX_CONTAINER",
imagePullCredentialsType: "CODEBUILD",
environmentVariables: [{
name: "SOME_KEY1",
value: "SOME_VALUE1",
}],
},
source: {
type: "GITHUB",
location: "https://github.com/mitchellh/packer.git",
gitCloneDepth: 1,
},
tags: {
Environment: "Test",
},
});
import pulumi
import pulumi_aws as aws
example_bucket_v2 = aws.s3.BucketV2("example", bucket="example")
example_bucket_acl_v2 = aws.s3.BucketAclV2("example",
bucket=example_bucket_v2.id,
acl="private")
assume_role = aws.iam.get_policy_document(statements=[{
"effect": "Allow",
"principals": [{
"type": "Service",
"identifiers": ["codebuild.amazonaws.com"],
}],
"actions": ["sts:AssumeRole"],
}])
example_role = aws.iam.Role("example",
name="example",
assume_role_policy=assume_role.json)
example = pulumi.Output.all(
exampleBucketV2Arn=example_bucket_v2.arn,
exampleBucketV2Arn1=example_bucket_v2.arn
).apply(lambda resolved_outputs: aws.iam.get_policy_document_output(statements=[
{
"effect": "Allow",
"actions": [
"logs:CreateLogGroup",
"logs:CreateLogStream",
"logs:PutLogEvents",
],
"resources": ["*"],
},
{
"effect": "Allow",
"actions": [
"ec2:CreateNetworkInterface",
"ec2:DescribeDhcpOptions",
"ec2:DescribeNetworkInterfaces",
"ec2:DeleteNetworkInterface",
"ec2:DescribeSubnets",
"ec2:DescribeSecurityGroups",
"ec2:DescribeVpcs",
],
"resources": ["*"],
},
{
"effect": "Allow",
"actions": ["ec2:CreateNetworkInterfacePermission"],
"resources": ["arn:aws:ec2:us-east-1:123456789012:network-interface/*"],
"conditions": [
{
"test": "StringEquals",
"variable": "ec2:Subnet",
"values": [
example1["arn"],
example2["arn"],
],
},
{
"test": "StringEquals",
"variable": "ec2:AuthorizedService",
"values": ["codebuild.amazonaws.com"],
},
],
},
{
"effect": "Allow",
"actions": ["s3:*"],
"resources": [
resolved_outputs['exampleBucketV2Arn'],
f"{resolved_outputs['exampleBucketV2Arn1']}/*",
],
},
]))
example_role_policy = aws.iam.RolePolicy("example",
role=example_role.name,
policy=example.json)
example_project = aws.codebuild.Project("example",
name="test-project",
description="test_codebuild_project",
build_timeout=5,
service_role=example_role.arn,
artifacts={
"type": "NO_ARTIFACTS",
},
cache={
"type": "S3",
"location": example_bucket_v2.bucket,
},
environment={
"compute_type": "BUILD_GENERAL1_SMALL",
"image": "aws/codebuild/amazonlinux2-x86_64-standard:4.0",
"type": "LINUX_CONTAINER",
"image_pull_credentials_type": "CODEBUILD",
"environment_variables": [
{
"name": "SOME_KEY1",
"value": "SOME_VALUE1",
},
{
"name": "SOME_KEY2",
"value": "SOME_VALUE2",
"type": "PARAMETER_STORE",
},
],
},
logs_config={
"cloudwatch_logs": {
"group_name": "log-group",
"stream_name": "log-stream",
},
"s3_logs": {
"status": "ENABLED",
"location": example_bucket_v2.id.apply(lambda id: f"{id}/build-log"),
},
},
source={
"type": "GITHUB",
"location": "https://github.com/mitchellh/packer.git",
"git_clone_depth": 1,
"git_submodules_config": {
"fetch_submodules": True,
},
},
source_version="master",
vpc_config={
"vpc_id": example_aws_vpc["id"],
"subnets": [
example1["id"],
example2["id"],
],
"security_group_ids": [
example1_aws_security_group["id"],
example2_aws_security_group["id"],
],
},
tags={
"Environment": "Test",
})
project_with_cache = aws.codebuild.Project("project-with-cache",
name="test-project-cache",
description="test_codebuild_project_cache",
build_timeout=5,
queued_timeout=5,
service_role=example_role.arn,
artifacts={
"type": "NO_ARTIFACTS",
},
cache={
"type": "LOCAL",
"modes": [
"LOCAL_DOCKER_LAYER_CACHE",
"LOCAL_SOURCE_CACHE",
],
},
environment={
"compute_type": "BUILD_GENERAL1_SMALL",
"image": "aws/codebuild/amazonlinux2-x86_64-standard:4.0",
"type": "LINUX_CONTAINER",
"image_pull_credentials_type": "CODEBUILD",
"environment_variables": [{
"name": "SOME_KEY1",
"value": "SOME_VALUE1",
}],
},
source={
"type": "GITHUB",
"location": "https://github.com/mitchellh/packer.git",
"git_clone_depth": 1,
},
tags={
"Environment": "Test",
})
package main
import (
"fmt"
"github.com/pulumi/pulumi-aws/sdk/v6/go/aws/codebuild"
"github.com/pulumi/pulumi-aws/sdk/v6/go/aws/iam"
"github.com/pulumi/pulumi-aws/sdk/v6/go/aws/s3"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
exampleBucketV2, err := s3.NewBucketV2(ctx, "example", &s3.BucketV2Args{
Bucket: pulumi.String("example"),
})
if err != nil {
return err
}
_, err = s3.NewBucketAclV2(ctx, "example", &s3.BucketAclV2Args{
Bucket: exampleBucketV2.ID(),
Acl: pulumi.String("private"),
})
if err != nil {
return err
}
assumeRole, err := iam.GetPolicyDocument(ctx, &iam.GetPolicyDocumentArgs{
Statements: []iam.GetPolicyDocumentStatement{
{
Effect: pulumi.StringRef("Allow"),
Principals: []iam.GetPolicyDocumentStatementPrincipal{
{
Type: "Service",
Identifiers: []string{
"codebuild.amazonaws.com",
},
},
},
Actions: []string{
"sts:AssumeRole",
},
},
},
}, nil);
if err != nil {
return err
}
exampleRole, err := iam.NewRole(ctx, "example", &iam.RoleArgs{
Name: pulumi.String("example"),
AssumeRolePolicy: pulumi.String(assumeRole.Json),
})
if err != nil {
return err
}
example := pulumi.All(exampleBucketV2.Arn,exampleBucketV2.Arn).ApplyT(func(_args []interface{}) (iam.GetPolicyDocumentResult, error) {
exampleBucketV2Arn := _args[0].(string)
exampleBucketV2Arn1 := _args[1].(string)
return iam.GetPolicyDocumentResult(interface{}(iam.GetPolicyDocumentOutput(ctx, iam.GetPolicyDocumentOutputArgs{
Statements: []iam.GetPolicyDocumentStatement{
{
Effect: "Allow",
Actions: []string{
"logs:CreateLogGroup",
"logs:CreateLogStream",
"logs:PutLogEvents",
},
Resources: []string{
"*",
},
},
{
Effect: "Allow",
Actions: []string{
"ec2:CreateNetworkInterface",
"ec2:DescribeDhcpOptions",
"ec2:DescribeNetworkInterfaces",
"ec2:DeleteNetworkInterface",
"ec2:DescribeSubnets",
"ec2:DescribeSecurityGroups",
"ec2:DescribeVpcs",
},
Resources: []string{
"*",
},
},
{
Effect: "Allow",
Actions: []string{
"ec2:CreateNetworkInterfacePermission",
},
Resources: []string{
"arn:aws:ec2:us-east-1:123456789012:network-interface/*",
},
Conditions: []iam.GetPolicyDocumentStatementCondition{
{
Test: "StringEquals",
Variable: "ec2:Subnet",
Values: interface{}{
example1.Arn,
example2.Arn,
},
},
{
Test: "StringEquals",
Variable: "ec2:AuthorizedService",
Values: []string{
"codebuild.amazonaws.com",
},
},
},
},
{
Effect: "Allow",
Actions: []string{
"s3:*",
},
Resources: []string{
exampleBucketV2Arn,
fmt.Sprintf("%v/*", exampleBucketV2Arn1),
},
},
},
}, nil))), nil
}).(iam.GetPolicyDocumentResultOutput)
_, err = iam.NewRolePolicy(ctx, "example", &iam.RolePolicyArgs{
Role: exampleRole.Name,
Policy: pulumi.String(example.ApplyT(func(example iam.GetPolicyDocumentResult) (*string, error) {
return &example.Json, nil
}).(pulumi.StringPtrOutput)),
})
if err != nil {
return err
}
_, err = codebuild.NewProject(ctx, "example", &codebuild.ProjectArgs{
Name: pulumi.String("test-project"),
Description: pulumi.String("test_codebuild_project"),
BuildTimeout: pulumi.Int(5),
ServiceRole: exampleRole.Arn,
Artifacts: &codebuild.ProjectArtifactsArgs{
Type: pulumi.String("NO_ARTIFACTS"),
},
Cache: &codebuild.ProjectCacheArgs{
Type: pulumi.String("S3"),
Location: exampleBucketV2.Bucket,
},
Environment: &codebuild.ProjectEnvironmentArgs{
ComputeType: pulumi.String("BUILD_GENERAL1_SMALL"),
Image: pulumi.String("aws/codebuild/amazonlinux2-x86_64-standard:4.0"),
Type: pulumi.String("LINUX_CONTAINER"),
ImagePullCredentialsType: pulumi.String("CODEBUILD"),
EnvironmentVariables: codebuild.ProjectEnvironmentEnvironmentVariableArray{
&codebuild.ProjectEnvironmentEnvironmentVariableArgs{
Name: pulumi.String("SOME_KEY1"),
Value: pulumi.String("SOME_VALUE1"),
},
&codebuild.ProjectEnvironmentEnvironmentVariableArgs{
Name: pulumi.String("SOME_KEY2"),
Value: pulumi.String("SOME_VALUE2"),
Type: pulumi.String("PARAMETER_STORE"),
},
},
},
LogsConfig: &codebuild.ProjectLogsConfigArgs{
CloudwatchLogs: &codebuild.ProjectLogsConfigCloudwatchLogsArgs{
GroupName: pulumi.String("log-group"),
StreamName: pulumi.String("log-stream"),
},
S3Logs: &codebuild.ProjectLogsConfigS3LogsArgs{
Status: pulumi.String("ENABLED"),
Location: exampleBucketV2.ID().ApplyT(func(id string) (string, error) {
return fmt.Sprintf("%v/build-log", id), nil
}).(pulumi.StringOutput),
},
},
Source: &codebuild.ProjectSourceArgs{
Type: pulumi.String("GITHUB"),
Location: pulumi.String("https://github.com/mitchellh/packer.git"),
GitCloneDepth: pulumi.Int(1),
GitSubmodulesConfig: &codebuild.ProjectSourceGitSubmodulesConfigArgs{
FetchSubmodules: pulumi.Bool(true),
},
},
SourceVersion: pulumi.String("master"),
VpcConfig: &codebuild.ProjectVpcConfigArgs{
VpcId: pulumi.Any(exampleAwsVpc.Id),
Subnets: pulumi.StringArray{
example1.Id,
example2.Id,
},
SecurityGroupIds: pulumi.StringArray{
example1AwsSecurityGroup.Id,
example2AwsSecurityGroup.Id,
},
},
Tags: pulumi.StringMap{
"Environment": pulumi.String("Test"),
},
})
if err != nil {
return err
}
_, err = codebuild.NewProject(ctx, "project-with-cache", &codebuild.ProjectArgs{
Name: pulumi.String("test-project-cache"),
Description: pulumi.String("test_codebuild_project_cache"),
BuildTimeout: pulumi.Int(5),
QueuedTimeout: pulumi.Int(5),
ServiceRole: exampleRole.Arn,
Artifacts: &codebuild.ProjectArtifactsArgs{
Type: pulumi.String("NO_ARTIFACTS"),
},
Cache: &codebuild.ProjectCacheArgs{
Type: pulumi.String("LOCAL"),
Modes: pulumi.StringArray{
pulumi.String("LOCAL_DOCKER_LAYER_CACHE"),
pulumi.String("LOCAL_SOURCE_CACHE"),
},
},
Environment: &codebuild.ProjectEnvironmentArgs{
ComputeType: pulumi.String("BUILD_GENERAL1_SMALL"),
Image: pulumi.String("aws/codebuild/amazonlinux2-x86_64-standard:4.0"),
Type: pulumi.String("LINUX_CONTAINER"),
ImagePullCredentialsType: pulumi.String("CODEBUILD"),
EnvironmentVariables: codebuild.ProjectEnvironmentEnvironmentVariableArray{
&codebuild.ProjectEnvironmentEnvironmentVariableArgs{
Name: pulumi.String("SOME_KEY1"),
Value: pulumi.String("SOME_VALUE1"),
},
},
},
Source: &codebuild.ProjectSourceArgs{
Type: pulumi.String("GITHUB"),
Location: pulumi.String("https://github.com/mitchellh/packer.git"),
GitCloneDepth: pulumi.Int(1),
},
Tags: pulumi.StringMap{
"Environment": pulumi.String("Test"),
},
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Aws = Pulumi.Aws;
return await Deployment.RunAsync(() =>
{
var exampleBucketV2 = new Aws.S3.BucketV2("example", new()
{
Bucket = "example",
});
var exampleBucketAclV2 = new Aws.S3.BucketAclV2("example", new()
{
Bucket = exampleBucketV2.Id,
Acl = "private",
});
var assumeRole = Aws.Iam.GetPolicyDocument.Invoke(new()
{
Statements = new[]
{
new Aws.Iam.Inputs.GetPolicyDocumentStatementInputArgs
{
Effect = "Allow",
Principals = new[]
{
new Aws.Iam.Inputs.GetPolicyDocumentStatementPrincipalInputArgs
{
Type = "Service",
Identifiers = new[]
{
"codebuild.amazonaws.com",
},
},
},
Actions = new[]
{
"sts:AssumeRole",
},
},
},
});
var exampleRole = new Aws.Iam.Role("example", new()
{
Name = "example",
AssumeRolePolicy = assumeRole.Apply(getPolicyDocumentResult => getPolicyDocumentResult.Json),
});
var example = Aws.Iam.GetPolicyDocument.Invoke(new()
{
Statements = new[]
{
new Aws.Iam.Inputs.GetPolicyDocumentStatementInputArgs
{
Effect = "Allow",
Actions = new[]
{
"logs:CreateLogGroup",
"logs:CreateLogStream",
"logs:PutLogEvents",
},
Resources = new[]
{
"*",
},
},
new Aws.Iam.Inputs.GetPolicyDocumentStatementInputArgs
{
Effect = "Allow",
Actions = new[]
{
"ec2:CreateNetworkInterface",
"ec2:DescribeDhcpOptions",
"ec2:DescribeNetworkInterfaces",
"ec2:DeleteNetworkInterface",
"ec2:DescribeSubnets",
"ec2:DescribeSecurityGroups",
"ec2:DescribeVpcs",
},
Resources = new[]
{
"*",
},
},
new Aws.Iam.Inputs.GetPolicyDocumentStatementInputArgs
{
Effect = "Allow",
Actions = new[]
{
"ec2:CreateNetworkInterfacePermission",
},
Resources = new[]
{
"arn:aws:ec2:us-east-1:123456789012:network-interface/*",
},
Conditions = new[]
{
new Aws.Iam.Inputs.GetPolicyDocumentStatementConditionInputArgs
{
Test = "StringEquals",
Variable = "ec2:Subnet",
Values = new[]
{
example1.Arn,
example2.Arn,
},
},
new Aws.Iam.Inputs.GetPolicyDocumentStatementConditionInputArgs
{
Test = "StringEquals",
Variable = "ec2:AuthorizedService",
Values = new[]
{
"codebuild.amazonaws.com",
},
},
},
},
new Aws.Iam.Inputs.GetPolicyDocumentStatementInputArgs
{
Effect = "Allow",
Actions = new[]
{
"s3:*",
},
Resources = new[]
{
exampleBucketV2.Arn,
$"{exampleBucketV2.Arn}/*",
},
},
},
});
var exampleRolePolicy = new Aws.Iam.RolePolicy("example", new()
{
Role = exampleRole.Name,
Policy = example.Apply(getPolicyDocumentResult => getPolicyDocumentResult.Json),
});
var exampleProject = new Aws.CodeBuild.Project("example", new()
{
Name = "test-project",
Description = "test_codebuild_project",
BuildTimeout = 5,
ServiceRole = exampleRole.Arn,
Artifacts = new Aws.CodeBuild.Inputs.ProjectArtifactsArgs
{
Type = "NO_ARTIFACTS",
},
Cache = new Aws.CodeBuild.Inputs.ProjectCacheArgs
{
Type = "S3",
Location = exampleBucketV2.Bucket,
},
Environment = new Aws.CodeBuild.Inputs.ProjectEnvironmentArgs
{
ComputeType = "BUILD_GENERAL1_SMALL",
Image = "aws/codebuild/amazonlinux2-x86_64-standard:4.0",
Type = "LINUX_CONTAINER",
ImagePullCredentialsType = "CODEBUILD",
EnvironmentVariables = new[]
{
new Aws.CodeBuild.Inputs.ProjectEnvironmentEnvironmentVariableArgs
{
Name = "SOME_KEY1",
Value = "SOME_VALUE1",
},
new Aws.CodeBuild.Inputs.ProjectEnvironmentEnvironmentVariableArgs
{
Name = "SOME_KEY2",
Value = "SOME_VALUE2",
Type = "PARAMETER_STORE",
},
},
},
LogsConfig = new Aws.CodeBuild.Inputs.ProjectLogsConfigArgs
{
CloudwatchLogs = new Aws.CodeBuild.Inputs.ProjectLogsConfigCloudwatchLogsArgs
{
GroupName = "log-group",
StreamName = "log-stream",
},
S3Logs = new Aws.CodeBuild.Inputs.ProjectLogsConfigS3LogsArgs
{
Status = "ENABLED",
Location = exampleBucketV2.Id.Apply(id => $"{id}/build-log"),
},
},
Source = new Aws.CodeBuild.Inputs.ProjectSourceArgs
{
Type = "GITHUB",
Location = "https://github.com/mitchellh/packer.git",
GitCloneDepth = 1,
GitSubmodulesConfig = new Aws.CodeBuild.Inputs.ProjectSourceGitSubmodulesConfigArgs
{
FetchSubmodules = true,
},
},
SourceVersion = "master",
VpcConfig = new Aws.CodeBuild.Inputs.ProjectVpcConfigArgs
{
VpcId = exampleAwsVpc.Id,
Subnets = new[]
{
example1.Id,
example2.Id,
},
SecurityGroupIds = new[]
{
example1AwsSecurityGroup.Id,
example2AwsSecurityGroup.Id,
},
},
Tags =
{
{ "Environment", "Test" },
},
});
var project_with_cache = new Aws.CodeBuild.Project("project-with-cache", new()
{
Name = "test-project-cache",
Description = "test_codebuild_project_cache",
BuildTimeout = 5,
QueuedTimeout = 5,
ServiceRole = exampleRole.Arn,
Artifacts = new Aws.CodeBuild.Inputs.ProjectArtifactsArgs
{
Type = "NO_ARTIFACTS",
},
Cache = new Aws.CodeBuild.Inputs.ProjectCacheArgs
{
Type = "LOCAL",
Modes = new[]
{
"LOCAL_DOCKER_LAYER_CACHE",
"LOCAL_SOURCE_CACHE",
},
},
Environment = new Aws.CodeBuild.Inputs.ProjectEnvironmentArgs
{
ComputeType = "BUILD_GENERAL1_SMALL",
Image = "aws/codebuild/amazonlinux2-x86_64-standard:4.0",
Type = "LINUX_CONTAINER",
ImagePullCredentialsType = "CODEBUILD",
EnvironmentVariables = new[]
{
new Aws.CodeBuild.Inputs.ProjectEnvironmentEnvironmentVariableArgs
{
Name = "SOME_KEY1",
Value = "SOME_VALUE1",
},
},
},
Source = new Aws.CodeBuild.Inputs.ProjectSourceArgs
{
Type = "GITHUB",
Location = "https://github.com/mitchellh/packer.git",
GitCloneDepth = 1,
},
Tags =
{
{ "Environment", "Test" },
},
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.aws.s3.BucketV2;
import com.pulumi.aws.s3.BucketV2Args;
import com.pulumi.aws.s3.BucketAclV2;
import com.pulumi.aws.s3.BucketAclV2Args;
import com.pulumi.aws.iam.IamFunctions;
import com.pulumi.aws.iam.inputs.GetPolicyDocumentArgs;
import com.pulumi.aws.iam.Role;
import com.pulumi.aws.iam.RoleArgs;
import com.pulumi.aws.iam.RolePolicy;
import com.pulumi.aws.iam.RolePolicyArgs;
import com.pulumi.aws.codebuild.Project;
import com.pulumi.aws.codebuild.ProjectArgs;
import com.pulumi.aws.codebuild.inputs.ProjectArtifactsArgs;
import com.pulumi.aws.codebuild.inputs.ProjectCacheArgs;
import com.pulumi.aws.codebuild.inputs.ProjectEnvironmentArgs;
import com.pulumi.aws.codebuild.inputs.ProjectLogsConfigArgs;
import com.pulumi.aws.codebuild.inputs.ProjectLogsConfigCloudwatchLogsArgs;
import com.pulumi.aws.codebuild.inputs.ProjectLogsConfigS3LogsArgs;
import com.pulumi.aws.codebuild.inputs.ProjectSourceArgs;
import com.pulumi.aws.codebuild.inputs.ProjectSourceGitSubmodulesConfigArgs;
import com.pulumi.aws.codebuild.inputs.ProjectVpcConfigArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
var exampleBucketV2 = new BucketV2("exampleBucketV2", BucketV2Args.builder()
.bucket("example")
.build());
var exampleBucketAclV2 = new BucketAclV2("exampleBucketAclV2", BucketAclV2Args.builder()
.bucket(exampleBucketV2.id())
.acl("private")
.build());
final var assumeRole = IamFunctions.getPolicyDocument(GetPolicyDocumentArgs.builder()
.statements(GetPolicyDocumentStatementArgs.builder()
.effect("Allow")
.principals(GetPolicyDocumentStatementPrincipalArgs.builder()
.type("Service")
.identifiers("codebuild.amazonaws.com")
.build())
.actions("sts:AssumeRole")
.build())
.build());
var exampleRole = new Role("exampleRole", RoleArgs.builder()
.name("example")
.assumeRolePolicy(assumeRole.applyValue(getPolicyDocumentResult -> getPolicyDocumentResult.json()))
.build());
final var example = IamFunctions.getPolicyDocument(GetPolicyDocumentArgs.builder()
.statements(
GetPolicyDocumentStatementArgs.builder()
.effect("Allow")
.actions(
"logs:CreateLogGroup",
"logs:CreateLogStream",
"logs:PutLogEvents")
.resources("*")
.build(),
GetPolicyDocumentStatementArgs.builder()
.effect("Allow")
.actions(
"ec2:CreateNetworkInterface",
"ec2:DescribeDhcpOptions",
"ec2:DescribeNetworkInterfaces",
"ec2:DeleteNetworkInterface",
"ec2:DescribeSubnets",
"ec2:DescribeSecurityGroups",
"ec2:DescribeVpcs")
.resources("*")
.build(),
GetPolicyDocumentStatementArgs.builder()
.effect("Allow")
.actions("ec2:CreateNetworkInterfacePermission")
.resources("arn:aws:ec2:us-east-1:123456789012:network-interface/*")
.conditions(
GetPolicyDocumentStatementConditionArgs.builder()
.test("StringEquals")
.variable("ec2:Subnet")
.values(
example1.arn(),
example2.arn())
.build(),
GetPolicyDocumentStatementConditionArgs.builder()
.test("StringEquals")
.variable("ec2:AuthorizedService")
.values("codebuild.amazonaws.com")
.build())
.build(),
GetPolicyDocumentStatementArgs.builder()
.effect("Allow")
.actions("s3:*")
.resources(
exampleBucketV2.arn(),
exampleBucketV2.arn().applyValue(arn -> String.format("%s/*", arn)))
.build())
.build());
var exampleRolePolicy = new RolePolicy("exampleRolePolicy", RolePolicyArgs.builder()
.role(exampleRole.name())
.policy(example.applyValue(getPolicyDocumentResult -> getPolicyDocumentResult).applyValue(example -> example.applyValue(getPolicyDocumentResult -> getPolicyDocumentResult.json())))
.build());
var exampleProject = new Project("exampleProject", ProjectArgs.builder()
.name("test-project")
.description("test_codebuild_project")
.buildTimeout(5)
.serviceRole(exampleRole.arn())
.artifacts(ProjectArtifactsArgs.builder()
.type("NO_ARTIFACTS")
.build())
.cache(ProjectCacheArgs.builder()
.type("S3")
.location(exampleBucketV2.bucket())
.build())
.environment(ProjectEnvironmentArgs.builder()
.computeType("BUILD_GENERAL1_SMALL")
.image("aws/codebuild/amazonlinux2-x86_64-standard:4.0")
.type("LINUX_CONTAINER")
.imagePullCredentialsType("CODEBUILD")
.environmentVariables(
ProjectEnvironmentEnvironmentVariableArgs.builder()
.name("SOME_KEY1")
.value("SOME_VALUE1")
.build(),
ProjectEnvironmentEnvironmentVariableArgs.builder()
.name("SOME_KEY2")
.value("SOME_VALUE2")
.type("PARAMETER_STORE")
.build())
.build())
.logsConfig(ProjectLogsConfigArgs.builder()
.cloudwatchLogs(ProjectLogsConfigCloudwatchLogsArgs.builder()
.groupName("log-group")
.streamName("log-stream")
.build())
.s3Logs(ProjectLogsConfigS3LogsArgs.builder()
.status("ENABLED")
.location(exampleBucketV2.id().applyValue(id -> String.format("%s/build-log", id)))
.build())
.build())
.source(ProjectSourceArgs.builder()
.type("GITHUB")
.location("https://github.com/mitchellh/packer.git")
.gitCloneDepth(1)
.gitSubmodulesConfig(ProjectSourceGitSubmodulesConfigArgs.builder()
.fetchSubmodules(true)
.build())
.build())
.sourceVersion("master")
.vpcConfig(ProjectVpcConfigArgs.builder()
.vpcId(exampleAwsVpc.id())
.subnets(
example1.id(),
example2.id())
.securityGroupIds(
example1AwsSecurityGroup.id(),
example2AwsSecurityGroup.id())
.build())
.tags(Map.of("Environment", "Test"))
.build());
var project_with_cache = new Project("project-with-cache", ProjectArgs.builder()
.name("test-project-cache")
.description("test_codebuild_project_cache")
.buildTimeout(5)
.queuedTimeout(5)
.serviceRole(exampleRole.arn())
.artifacts(ProjectArtifactsArgs.builder()
.type("NO_ARTIFACTS")
.build())
.cache(ProjectCacheArgs.builder()
.type("LOCAL")
.modes(
"LOCAL_DOCKER_LAYER_CACHE",
"LOCAL_SOURCE_CACHE")
.build())
.environment(ProjectEnvironmentArgs.builder()
.computeType("BUILD_GENERAL1_SMALL")
.image("aws/codebuild/amazonlinux2-x86_64-standard:4.0")
.type("LINUX_CONTAINER")
.imagePullCredentialsType("CODEBUILD")
.environmentVariables(ProjectEnvironmentEnvironmentVariableArgs.builder()
.name("SOME_KEY1")
.value("SOME_VALUE1")
.build())
.build())
.source(ProjectSourceArgs.builder()
.type("GITHUB")
.location("https://github.com/mitchellh/packer.git")
.gitCloneDepth(1)
.build())
.tags(Map.of("Environment", "Test"))
.build());
}
}
resources:
exampleBucketV2:
type: aws:s3:BucketV2
name: example
properties:
bucket: example
exampleBucketAclV2:
type: aws:s3:BucketAclV2
name: example
properties:
bucket: ${exampleBucketV2.id}
acl: private
exampleRole:
type: aws:iam:Role
name: example
properties:
name: example
assumeRolePolicy: ${assumeRole.json}
exampleRolePolicy:
type: aws:iam:RolePolicy
name: example
properties:
role: ${exampleRole.name}
policy: ${example.json}
exampleProject:
type: aws:codebuild:Project
name: example
properties:
name: test-project
description: test_codebuild_project
buildTimeout: 5
serviceRole: ${exampleRole.arn}
artifacts:
type: NO_ARTIFACTS
cache:
type: S3
location: ${exampleBucketV2.bucket}
environment:
computeType: BUILD_GENERAL1_SMALL
image: aws/codebuild/amazonlinux2-x86_64-standard:4.0
type: LINUX_CONTAINER
imagePullCredentialsType: CODEBUILD
environmentVariables:
- name: SOME_KEY1
value: SOME_VALUE1
- name: SOME_KEY2
value: SOME_VALUE2
type: PARAMETER_STORE
logsConfig:
cloudwatchLogs:
groupName: log-group
streamName: log-stream
s3Logs:
status: ENABLED
location: ${exampleBucketV2.id}/build-log
source:
type: GITHUB
location: https://github.com/mitchellh/packer.git
gitCloneDepth: 1
gitSubmodulesConfig:
fetchSubmodules: true
sourceVersion: master
vpcConfig:
vpcId: ${exampleAwsVpc.id}
subnets:
- ${example1.id}
- ${example2.id}
securityGroupIds:
- ${example1AwsSecurityGroup.id}
- ${example2AwsSecurityGroup.id}
tags:
Environment: Test
project-with-cache:
type: aws:codebuild:Project
properties:
name: test-project-cache
description: test_codebuild_project_cache
buildTimeout: 5
queuedTimeout: 5
serviceRole: ${exampleRole.arn}
artifacts:
type: NO_ARTIFACTS
cache:
type: LOCAL
modes:
- LOCAL_DOCKER_LAYER_CACHE
- LOCAL_SOURCE_CACHE
environment:
computeType: BUILD_GENERAL1_SMALL
image: aws/codebuild/amazonlinux2-x86_64-standard:4.0
type: LINUX_CONTAINER
imagePullCredentialsType: CODEBUILD
environmentVariables:
- name: SOME_KEY1
value: SOME_VALUE1
source:
type: GITHUB
location: https://github.com/mitchellh/packer.git
gitCloneDepth: 1
tags:
Environment: Test
variables:
assumeRole:
fn::invoke:
Function: aws:iam:getPolicyDocument
Arguments:
statements:
- effect: Allow
principals:
- type: Service
identifiers:
- codebuild.amazonaws.com
actions:
- sts:AssumeRole
example:
fn::invoke:
Function: aws:iam:getPolicyDocument
Arguments:
statements:
- effect: Allow
actions:
- logs:CreateLogGroup
- logs:CreateLogStream
- logs:PutLogEvents
resources:
- '*'
- effect: Allow
actions:
- ec2:CreateNetworkInterface
- ec2:DescribeDhcpOptions
- ec2:DescribeNetworkInterfaces
- ec2:DeleteNetworkInterface
- ec2:DescribeSubnets
- ec2:DescribeSecurityGroups
- ec2:DescribeVpcs
resources:
- '*'
- effect: Allow
actions:
- ec2:CreateNetworkInterfacePermission
resources:
- arn:aws:ec2:us-east-1:123456789012:network-interface/*
conditions:
- test: StringEquals
variable: ec2:Subnet
values:
- ${example1.arn}
- ${example2.arn}
- test: StringEquals
variable: ec2:AuthorizedService
values:
- codebuild.amazonaws.com
- effect: Allow
actions:
- s3:*
resources:
- ${exampleBucketV2.arn}
- ${exampleBucketV2.arn}/*
Create Project Resource
Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.
Constructor syntax
new Project(name: string, args: ProjectArgs, opts?: CustomResourceOptions);@overload
def Project(resource_name: str,
args: ProjectArgs,
opts: Optional[ResourceOptions] = None)
@overload
def Project(resource_name: str,
opts: Optional[ResourceOptions] = None,
environment: Optional[ProjectEnvironmentArgs] = None,
source: Optional[ProjectSourceArgs] = None,
service_role: Optional[str] = None,
artifacts: Optional[ProjectArtifactsArgs] = None,
logs_config: Optional[ProjectLogsConfigArgs] = None,
queued_timeout: Optional[int] = None,
description: Optional[str] = None,
encryption_key: Optional[str] = None,
cache: Optional[ProjectCacheArgs] = None,
file_system_locations: Optional[Sequence[ProjectFileSystemLocationArgs]] = None,
build_timeout: Optional[int] = None,
name: Optional[str] = None,
project_visibility: Optional[str] = None,
concurrent_build_limit: Optional[int] = None,
resource_access_role: Optional[str] = None,
secondary_artifacts: Optional[Sequence[ProjectSecondaryArtifactArgs]] = None,
secondary_source_versions: Optional[Sequence[ProjectSecondarySourceVersionArgs]] = None,
secondary_sources: Optional[Sequence[ProjectSecondarySourceArgs]] = None,
build_batch_config: Optional[ProjectBuildBatchConfigArgs] = None,
badge_enabled: Optional[bool] = None,
source_version: Optional[str] = None,
tags: Optional[Mapping[str, str]] = None,
vpc_config: Optional[ProjectVpcConfigArgs] = None)func NewProject(ctx *Context, name string, args ProjectArgs, opts ...ResourceOption) (*Project, error)public Project(string name, ProjectArgs args, CustomResourceOptions? opts = null)
public Project(String name, ProjectArgs args)
public Project(String name, ProjectArgs args, CustomResourceOptions options)
type: aws:codebuild:Project
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.
Parameters
- name string
- The unique name of the resource.
- args ProjectArgs
- The arguments to resource properties.
- opts CustomResourceOptions
- Bag of options to control resource's behavior.
- resource_name str
- The unique name of the resource.
- args ProjectArgs
- The arguments to resource properties.
- opts ResourceOptions
- Bag of options to control resource's behavior.
- ctx Context
- Context object for the current deployment.
- name string
- The unique name of the resource.
- args ProjectArgs
- The arguments to resource properties.
- opts ResourceOption
- Bag of options to control resource's behavior.
- name string
- The unique name of the resource.
- args ProjectArgs
- The arguments to resource properties.
- opts CustomResourceOptions
- Bag of options to control resource's behavior.
- name String
- The unique name of the resource.
- args ProjectArgs
- The arguments to resource properties.
- options CustomResourceOptions
- Bag of options to control resource's behavior.
Constructor example
The following reference example uses placeholder values for all input properties.
var projectResource = new Aws.CodeBuild.Project("projectResource", new()
{
Environment = new Aws.CodeBuild.Inputs.ProjectEnvironmentArgs
{
ComputeType = "string",
Image = "string",
Type = "string",
Certificate = "string",
EnvironmentVariables = new[]
{
new Aws.CodeBuild.Inputs.ProjectEnvironmentEnvironmentVariableArgs
{
Name = "string",
Value = "string",
Type = "string",
},
},
Fleet = new Aws.CodeBuild.Inputs.ProjectEnvironmentFleetArgs
{
FleetArn = "string",
},
ImagePullCredentialsType = "string",
PrivilegedMode = false,
RegistryCredential = new Aws.CodeBuild.Inputs.ProjectEnvironmentRegistryCredentialArgs
{
Credential = "string",
CredentialProvider = "string",
},
},
Source = new Aws.CodeBuild.Inputs.ProjectSourceArgs
{
Type = "string",
BuildStatusConfig = new Aws.CodeBuild.Inputs.ProjectSourceBuildStatusConfigArgs
{
Context = "string",
TargetUrl = "string",
},
Buildspec = "string",
GitCloneDepth = 0,
GitSubmodulesConfig = new Aws.CodeBuild.Inputs.ProjectSourceGitSubmodulesConfigArgs
{
FetchSubmodules = false,
},
InsecureSsl = false,
Location = "string",
ReportBuildStatus = false,
},
ServiceRole = "string",
Artifacts = new Aws.CodeBuild.Inputs.ProjectArtifactsArgs
{
Type = "string",
ArtifactIdentifier = "string",
BucketOwnerAccess = "string",
EncryptionDisabled = false,
Location = "string",
Name = "string",
NamespaceType = "string",
OverrideArtifactName = false,
Packaging = "string",
Path = "string",
},
LogsConfig = new Aws.CodeBuild.Inputs.ProjectLogsConfigArgs
{
CloudwatchLogs = new Aws.CodeBuild.Inputs.ProjectLogsConfigCloudwatchLogsArgs
{
GroupName = "string",
Status = "string",
StreamName = "string",
},
S3Logs = new Aws.CodeBuild.Inputs.ProjectLogsConfigS3LogsArgs
{
BucketOwnerAccess = "string",
EncryptionDisabled = false,
Location = "string",
Status = "string",
},
},
QueuedTimeout = 0,
Description = "string",
EncryptionKey = "string",
Cache = new Aws.CodeBuild.Inputs.ProjectCacheArgs
{
Location = "string",
Modes = new[]
{
"string",
},
Type = "string",
},
FileSystemLocations = new[]
{
new Aws.CodeBuild.Inputs.ProjectFileSystemLocationArgs
{
Identifier = "string",
Location = "string",
MountOptions = "string",
MountPoint = "string",
Type = "string",
},
},
BuildTimeout = 0,
Name = "string",
ProjectVisibility = "string",
ConcurrentBuildLimit = 0,
ResourceAccessRole = "string",
SecondaryArtifacts = new[]
{
new Aws.CodeBuild.Inputs.ProjectSecondaryArtifactArgs
{
ArtifactIdentifier = "string",
Type = "string",
BucketOwnerAccess = "string",
EncryptionDisabled = false,
Location = "string",
Name = "string",
NamespaceType = "string",
OverrideArtifactName = false,
Packaging = "string",
Path = "string",
},
},
SecondarySourceVersions = new[]
{
new Aws.CodeBuild.Inputs.ProjectSecondarySourceVersionArgs
{
SourceIdentifier = "string",
SourceVersion = "string",
},
},
SecondarySources = new[]
{
new Aws.CodeBuild.Inputs.ProjectSecondarySourceArgs
{
SourceIdentifier = "string",
Type = "string",
BuildStatusConfig = new Aws.CodeBuild.Inputs.ProjectSecondarySourceBuildStatusConfigArgs
{
Context = "string",
TargetUrl = "string",
},
Buildspec = "string",
GitCloneDepth = 0,
GitSubmodulesConfig = new Aws.CodeBuild.Inputs.ProjectSecondarySourceGitSubmodulesConfigArgs
{
FetchSubmodules = false,
},
InsecureSsl = false,
Location = "string",
ReportBuildStatus = false,
},
},
BuildBatchConfig = new Aws.CodeBuild.Inputs.ProjectBuildBatchConfigArgs
{
ServiceRole = "string",
CombineArtifacts = false,
Restrictions = new Aws.CodeBuild.Inputs.ProjectBuildBatchConfigRestrictionsArgs
{
ComputeTypesAlloweds = new[]
{
"string",
},
MaximumBuildsAllowed = 0,
},
TimeoutInMins = 0,
},
BadgeEnabled = false,
SourceVersion = "string",
Tags =
{
{ "string", "string" },
},
VpcConfig = new Aws.CodeBuild.Inputs.ProjectVpcConfigArgs
{
SecurityGroupIds = new[]
{
"string",
},
Subnets = new[]
{
"string",
},
VpcId = "string",
},
});
example, err := codebuild.NewProject(ctx, "projectResource", &codebuild.ProjectArgs{
Environment: &codebuild.ProjectEnvironmentArgs{
ComputeType: pulumi.String("string"),
Image: pulumi.String("string"),
Type: pulumi.String("string"),
Certificate: pulumi.String("string"),
EnvironmentVariables: codebuild.ProjectEnvironmentEnvironmentVariableArray{
&codebuild.ProjectEnvironmentEnvironmentVariableArgs{
Name: pulumi.String("string"),
Value: pulumi.String("string"),
Type: pulumi.String("string"),
},
},
Fleet: &codebuild.ProjectEnvironmentFleetArgs{
FleetArn: pulumi.String("string"),
},
ImagePullCredentialsType: pulumi.String("string"),
PrivilegedMode: pulumi.Bool(false),
RegistryCredential: &codebuild.ProjectEnvironmentRegistryCredentialArgs{
Credential: pulumi.String("string"),
CredentialProvider: pulumi.String("string"),
},
},
Source: &codebuild.ProjectSourceArgs{
Type: pulumi.String("string"),
BuildStatusConfig: &codebuild.ProjectSourceBuildStatusConfigArgs{
Context: pulumi.String("string"),
TargetUrl: pulumi.String("string"),
},
Buildspec: pulumi.String("string"),
GitCloneDepth: pulumi.Int(0),
GitSubmodulesConfig: &codebuild.ProjectSourceGitSubmodulesConfigArgs{
FetchSubmodules: pulumi.Bool(false),
},
InsecureSsl: pulumi.Bool(false),
Location: pulumi.String("string"),
ReportBuildStatus: pulumi.Bool(false),
},
ServiceRole: pulumi.String("string"),
Artifacts: &codebuild.ProjectArtifactsArgs{
Type: pulumi.String("string"),
ArtifactIdentifier: pulumi.String("string"),
BucketOwnerAccess: pulumi.String("string"),
EncryptionDisabled: pulumi.Bool(false),
Location: pulumi.String("string"),
Name: pulumi.String("string"),
NamespaceType: pulumi.String("string"),
OverrideArtifactName: pulumi.Bool(false),
Packaging: pulumi.String("string"),
Path: pulumi.String("string"),
},
LogsConfig: &codebuild.ProjectLogsConfigArgs{
CloudwatchLogs: &codebuild.ProjectLogsConfigCloudwatchLogsArgs{
GroupName: pulumi.String("string"),
Status: pulumi.String("string"),
StreamName: pulumi.String("string"),
},
S3Logs: &codebuild.ProjectLogsConfigS3LogsArgs{
BucketOwnerAccess: pulumi.String("string"),
EncryptionDisabled: pulumi.Bool(false),
Location: pulumi.String("string"),
Status: pulumi.String("string"),
},
},
QueuedTimeout: pulumi.Int(0),
Description: pulumi.String("string"),
EncryptionKey: pulumi.String("string"),
Cache: &codebuild.ProjectCacheArgs{
Location: pulumi.String("string"),
Modes: pulumi.StringArray{
pulumi.String("string"),
},
Type: pulumi.String("string"),
},
FileSystemLocations: codebuild.ProjectFileSystemLocationArray{
&codebuild.ProjectFileSystemLocationArgs{
Identifier: pulumi.String("string"),
Location: pulumi.String("string"),
MountOptions: pulumi.String("string"),
MountPoint: pulumi.String("string"),
Type: pulumi.String("string"),
},
},
BuildTimeout: pulumi.Int(0),
Name: pulumi.String("string"),
ProjectVisibility: pulumi.String("string"),
ConcurrentBuildLimit: pulumi.Int(0),
ResourceAccessRole: pulumi.String("string"),
SecondaryArtifacts: codebuild.ProjectSecondaryArtifactArray{
&codebuild.ProjectSecondaryArtifactArgs{
ArtifactIdentifier: pulumi.String("string"),
Type: pulumi.String("string"),
BucketOwnerAccess: pulumi.String("string"),
EncryptionDisabled: pulumi.Bool(false),
Location: pulumi.String("string"),
Name: pulumi.String("string"),
NamespaceType: pulumi.String("string"),
OverrideArtifactName: pulumi.Bool(false),
Packaging: pulumi.String("string"),
Path: pulumi.String("string"),
},
},
SecondarySourceVersions: codebuild.ProjectSecondarySourceVersionArray{
&codebuild.ProjectSecondarySourceVersionArgs{
SourceIdentifier: pulumi.String("string"),
SourceVersion: pulumi.String("string"),
},
},
SecondarySources: codebuild.ProjectSecondarySourceArray{
&codebuild.ProjectSecondarySourceArgs{
SourceIdentifier: pulumi.String("string"),
Type: pulumi.String("string"),
BuildStatusConfig: &codebuild.ProjectSecondarySourceBuildStatusConfigArgs{
Context: pulumi.String("string"),
TargetUrl: pulumi.String("string"),
},
Buildspec: pulumi.String("string"),
GitCloneDepth: pulumi.Int(0),
GitSubmodulesConfig: &codebuild.ProjectSecondarySourceGitSubmodulesConfigArgs{
FetchSubmodules: pulumi.Bool(false),
},
InsecureSsl: pulumi.Bool(false),
Location: pulumi.String("string"),
ReportBuildStatus: pulumi.Bool(false),
},
},
BuildBatchConfig: &codebuild.ProjectBuildBatchConfigArgs{
ServiceRole: pulumi.String("string"),
CombineArtifacts: pulumi.Bool(false),
Restrictions: &codebuild.ProjectBuildBatchConfigRestrictionsArgs{
ComputeTypesAlloweds: pulumi.StringArray{
pulumi.String("string"),
},
MaximumBuildsAllowed: pulumi.Int(0),
},
TimeoutInMins: pulumi.Int(0),
},
BadgeEnabled: pulumi.Bool(false),
SourceVersion: pulumi.String("string"),
Tags: pulumi.StringMap{
"string": pulumi.String("string"),
},
VpcConfig: &codebuild.ProjectVpcConfigArgs{
SecurityGroupIds: pulumi.StringArray{
pulumi.String("string"),
},
Subnets: pulumi.StringArray{
pulumi.String("string"),
},
VpcId: pulumi.String("string"),
},
})
var projectResource = new Project("projectResource", ProjectArgs.builder()
.environment(ProjectEnvironmentArgs.builder()
.computeType("string")
.image("string")
.type("string")
.certificate("string")
.environmentVariables(ProjectEnvironmentEnvironmentVariableArgs.builder()
.name("string")
.value("string")
.type("string")
.build())
.fleet(ProjectEnvironmentFleetArgs.builder()
.fleetArn("string")
.build())
.imagePullCredentialsType("string")
.privilegedMode(false)
.registryCredential(ProjectEnvironmentRegistryCredentialArgs.builder()
.credential("string")
.credentialProvider("string")
.build())
.build())
.source(ProjectSourceArgs.builder()
.type("string")
.buildStatusConfig(ProjectSourceBuildStatusConfigArgs.builder()
.context("string")
.targetUrl("string")
.build())
.buildspec("string")
.gitCloneDepth(0)
.gitSubmodulesConfig(ProjectSourceGitSubmodulesConfigArgs.builder()
.fetchSubmodules(false)
.build())
.insecureSsl(false)
.location("string")
.reportBuildStatus(false)
.build())
.serviceRole("string")
.artifacts(ProjectArtifactsArgs.builder()
.type("string")
.artifactIdentifier("string")
.bucketOwnerAccess("string")
.encryptionDisabled(false)
.location("string")
.name("string")
.namespaceType("string")
.overrideArtifactName(false)
.packaging("string")
.path("string")
.build())
.logsConfig(ProjectLogsConfigArgs.builder()
.cloudwatchLogs(ProjectLogsConfigCloudwatchLogsArgs.builder()
.groupName("string")
.status("string")
.streamName("string")
.build())
.s3Logs(ProjectLogsConfigS3LogsArgs.builder()
.bucketOwnerAccess("string")
.encryptionDisabled(false)
.location("string")
.status("string")
.build())
.build())
.queuedTimeout(0)
.description("string")
.encryptionKey("string")
.cache(ProjectCacheArgs.builder()
.location("string")
.modes("string")
.type("string")
.build())
.fileSystemLocations(ProjectFileSystemLocationArgs.builder()
.identifier("string")
.location("string")
.mountOptions("string")
.mountPoint("string")
.type("string")
.build())
.buildTimeout(0)
.name("string")
.projectVisibility("string")
.concurrentBuildLimit(0)
.resourceAccessRole("string")
.secondaryArtifacts(ProjectSecondaryArtifactArgs.builder()
.artifactIdentifier("string")
.type("string")
.bucketOwnerAccess("string")
.encryptionDisabled(false)
.location("string")
.name("string")
.namespaceType("string")
.overrideArtifactName(false)
.packaging("string")
.path("string")
.build())
.secondarySourceVersions(ProjectSecondarySourceVersionArgs.builder()
.sourceIdentifier("string")
.sourceVersion("string")
.build())
.secondarySources(ProjectSecondarySourceArgs.builder()
.sourceIdentifier("string")
.type("string")
.buildStatusConfig(ProjectSecondarySourceBuildStatusConfigArgs.builder()
.context("string")
.targetUrl("string")
.build())
.buildspec("string")
.gitCloneDepth(0)
.gitSubmodulesConfig(ProjectSecondarySourceGitSubmodulesConfigArgs.builder()
.fetchSubmodules(false)
.build())
.insecureSsl(false)
.location("string")
.reportBuildStatus(false)
.build())
.buildBatchConfig(ProjectBuildBatchConfigArgs.builder()
.serviceRole("string")
.combineArtifacts(false)
.restrictions(ProjectBuildBatchConfigRestrictionsArgs.builder()
.computeTypesAlloweds("string")
.maximumBuildsAllowed(0)
.build())
.timeoutInMins(0)
.build())
.badgeEnabled(false)
.sourceVersion("string")
.tags(Map.of("string", "string"))
.vpcConfig(ProjectVpcConfigArgs.builder()
.securityGroupIds("string")
.subnets("string")
.vpcId("string")
.build())
.build());
project_resource = aws.codebuild.Project("projectResource",
environment={
"compute_type": "string",
"image": "string",
"type": "string",
"certificate": "string",
"environment_variables": [{
"name": "string",
"value": "string",
"type": "string",
}],
"fleet": {
"fleet_arn": "string",
},
"image_pull_credentials_type": "string",
"privileged_mode": False,
"registry_credential": {
"credential": "string",
"credential_provider": "string",
},
},
source={
"type": "string",
"build_status_config": {
"context": "string",
"target_url": "string",
},
"buildspec": "string",
"git_clone_depth": 0,
"git_submodules_config": {
"fetch_submodules": False,
},
"insecure_ssl": False,
"location": "string",
"report_build_status": False,
},
service_role="string",
artifacts={
"type": "string",
"artifact_identifier": "string",
"bucket_owner_access": "string",
"encryption_disabled": False,
"location": "string",
"name": "string",
"namespace_type": "string",
"override_artifact_name": False,
"packaging": "string",
"path": "string",
},
logs_config={
"cloudwatch_logs": {
"group_name": "string",
"status": "string",
"stream_name": "string",
},
"s3_logs": {
"bucket_owner_access": "string",
"encryption_disabled": False,
"location": "string",
"status": "string",
},
},
queued_timeout=0,
description="string",
encryption_key="string",
cache={
"location": "string",
"modes": ["string"],
"type": "string",
},
file_system_locations=[{
"identifier": "string",
"location": "string",
"mount_options": "string",
"mount_point": "string",
"type": "string",
}],
build_timeout=0,
name="string",
project_visibility="string",
concurrent_build_limit=0,
resource_access_role="string",
secondary_artifacts=[{
"artifact_identifier": "string",
"type": "string",
"bucket_owner_access": "string",
"encryption_disabled": False,
"location": "string",
"name": "string",
"namespace_type": "string",
"override_artifact_name": False,
"packaging": "string",
"path": "string",
}],
secondary_source_versions=[{
"source_identifier": "string",
"source_version": "string",
}],
secondary_sources=[{
"source_identifier": "string",
"type": "string",
"build_status_config": {
"context": "string",
"target_url": "string",
},
"buildspec": "string",
"git_clone_depth": 0,
"git_submodules_config": {
"fetch_submodules": False,
},
"insecure_ssl": False,
"location": "string",
"report_build_status": False,
}],
build_batch_config={
"service_role": "string",
"combine_artifacts": False,
"restrictions": {
"compute_types_alloweds": ["string"],
"maximum_builds_allowed": 0,
},
"timeout_in_mins": 0,
},
badge_enabled=False,
source_version="string",
tags={
"string": "string",
},
vpc_config={
"security_group_ids": ["string"],
"subnets": ["string"],
"vpc_id": "string",
})
const projectResource = new aws.codebuild.Project("projectResource", {
environment: {
computeType: "string",
image: "string",
type: "string",
certificate: "string",
environmentVariables: [{
name: "string",
value: "string",
type: "string",
}],
fleet: {
fleetArn: "string",
},
imagePullCredentialsType: "string",
privilegedMode: false,
registryCredential: {
credential: "string",
credentialProvider: "string",
},
},
source: {
type: "string",
buildStatusConfig: {
context: "string",
targetUrl: "string",
},
buildspec: "string",
gitCloneDepth: 0,
gitSubmodulesConfig: {
fetchSubmodules: false,
},
insecureSsl: false,
location: "string",
reportBuildStatus: false,
},
serviceRole: "string",
artifacts: {
type: "string",
artifactIdentifier: "string",
bucketOwnerAccess: "string",
encryptionDisabled: false,
location: "string",
name: "string",
namespaceType: "string",
overrideArtifactName: false,
packaging: "string",
path: "string",
},
logsConfig: {
cloudwatchLogs: {
groupName: "string",
status: "string",
streamName: "string",
},
s3Logs: {
bucketOwnerAccess: "string",
encryptionDisabled: false,
location: "string",
status: "string",
},
},
queuedTimeout: 0,
description: "string",
encryptionKey: "string",
cache: {
location: "string",
modes: ["string"],
type: "string",
},
fileSystemLocations: [{
identifier: "string",
location: "string",
mountOptions: "string",
mountPoint: "string",
type: "string",
}],
buildTimeout: 0,
name: "string",
projectVisibility: "string",
concurrentBuildLimit: 0,
resourceAccessRole: "string",
secondaryArtifacts: [{
artifactIdentifier: "string",
type: "string",
bucketOwnerAccess: "string",
encryptionDisabled: false,
location: "string",
name: "string",
namespaceType: "string",
overrideArtifactName: false,
packaging: "string",
path: "string",
}],
secondarySourceVersions: [{
sourceIdentifier: "string",
sourceVersion: "string",
}],
secondarySources: [{
sourceIdentifier: "string",
type: "string",
buildStatusConfig: {
context: "string",
targetUrl: "string",
},
buildspec: "string",
gitCloneDepth: 0,
gitSubmodulesConfig: {
fetchSubmodules: false,
},
insecureSsl: false,
location: "string",
reportBuildStatus: false,
}],
buildBatchConfig: {
serviceRole: "string",
combineArtifacts: false,
restrictions: {
computeTypesAlloweds: ["string"],
maximumBuildsAllowed: 0,
},
timeoutInMins: 0,
},
badgeEnabled: false,
sourceVersion: "string",
tags: {
string: "string",
},
vpcConfig: {
securityGroupIds: ["string"],
subnets: ["string"],
vpcId: "string",
},
});
type: aws:codebuild:Project
properties:
artifacts:
artifactIdentifier: string
bucketOwnerAccess: string
encryptionDisabled: false
location: string
name: string
namespaceType: string
overrideArtifactName: false
packaging: string
path: string
type: string
badgeEnabled: false
buildBatchConfig:
combineArtifacts: false
restrictions:
computeTypesAlloweds:
- string
maximumBuildsAllowed: 0
serviceRole: string
timeoutInMins: 0
buildTimeout: 0
cache:
location: string
modes:
- string
type: string
concurrentBuildLimit: 0
description: string
encryptionKey: string
environment:
certificate: string
computeType: string
environmentVariables:
- name: string
type: string
value: string
fleet:
fleetArn: string
image: string
imagePullCredentialsType: string
privilegedMode: false
registryCredential:
credential: string
credentialProvider: string
type: string
fileSystemLocations:
- identifier: string
location: string
mountOptions: string
mountPoint: string
type: string
logsConfig:
cloudwatchLogs:
groupName: string
status: string
streamName: string
s3Logs:
bucketOwnerAccess: string
encryptionDisabled: false
location: string
status: string
name: string
projectVisibility: string
queuedTimeout: 0
resourceAccessRole: string
secondaryArtifacts:
- artifactIdentifier: string
bucketOwnerAccess: string
encryptionDisabled: false
location: string
name: string
namespaceType: string
overrideArtifactName: false
packaging: string
path: string
type: string
secondarySourceVersions:
- sourceIdentifier: string
sourceVersion: string
secondarySources:
- buildStatusConfig:
context: string
targetUrl: string
buildspec: string
gitCloneDepth: 0
gitSubmodulesConfig:
fetchSubmodules: false
insecureSsl: false
location: string
reportBuildStatus: false
sourceIdentifier: string
type: string
serviceRole: string
source:
buildStatusConfig:
context: string
targetUrl: string
buildspec: string
gitCloneDepth: 0
gitSubmodulesConfig:
fetchSubmodules: false
insecureSsl: false
location: string
reportBuildStatus: false
type: string
sourceVersion: string
tags:
string: string
vpcConfig:
securityGroupIds:
- string
subnets:
- string
vpcId: string
Project Resource Properties
To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.
Inputs
In Python, inputs that are objects can be passed either as argument classes or as dictionary literals.
The Project resource accepts the following input properties:
- Artifacts
Project
Artifacts - Configuration block. Detailed below.
- Environment
Project
Environment - Configuration block. Detailed below.
- Service
Role string - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- Source
Project
Source Configuration block. Detailed below.
The following arguments are optional:
- Badge
Enabled bool - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - Build
Batch ProjectConfig Build Batch Config - Defines the batch build options for the project.
- Build
Timeout int - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - Cache
Project
Cache - Configuration block. Detailed below.
- Concurrent
Build intLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- Description string
- Short description of the project.
- Encryption
Key string - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- File
System List<ProjectLocations File System Location> - A set of file system locations to mount inside the build. File system locations are documented below.
- Logs
Config ProjectLogs Config - Configuration block. Detailed below.
- Name string
- Project's name.
- Project
Visibility string - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - Queued
Timeout int - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - Resource
Access stringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - Secondary
Artifacts List<ProjectSecondary Artifact> - Configuration block. Detailed below.
- Secondary
Source List<ProjectVersions Secondary Source Version> - Configuration block. Detailed below.
- Secondary
Sources List<ProjectSecondary Source> - Configuration block. Detailed below.
- Source
Version string - Version of the build input to be built for this project. If not specified, the latest version is used.
- Dictionary<string, string>
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - Vpc
Config ProjectVpc Config - Configuration block. Detailed below.
- Artifacts
Project
Artifacts Args - Configuration block. Detailed below.
- Environment
Project
Environment Args - Configuration block. Detailed below.
- Service
Role string - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- Source
Project
Source Args Configuration block. Detailed below.
The following arguments are optional:
- Badge
Enabled bool - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - Build
Batch ProjectConfig Build Batch Config Args - Defines the batch build options for the project.
- Build
Timeout int - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - Cache
Project
Cache Args - Configuration block. Detailed below.
- Concurrent
Build intLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- Description string
- Short description of the project.
- Encryption
Key string - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- File
System []ProjectLocations File System Location Args - A set of file system locations to mount inside the build. File system locations are documented below.
- Logs
Config ProjectLogs Config Args - Configuration block. Detailed below.
- Name string
- Project's name.
- Project
Visibility string - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - Queued
Timeout int - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - Resource
Access stringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - Secondary
Artifacts []ProjectSecondary Artifact Args - Configuration block. Detailed below.
- Secondary
Source []ProjectVersions Secondary Source Version Args - Configuration block. Detailed below.
- Secondary
Sources []ProjectSecondary Source Args - Configuration block. Detailed below.
- Source
Version string - Version of the build input to be built for this project. If not specified, the latest version is used.
- map[string]string
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - Vpc
Config ProjectVpc Config Args - Configuration block. Detailed below.
- artifacts
Project
Artifacts - Configuration block. Detailed below.
- environment
Project
Environment - Configuration block. Detailed below.
- service
Role String - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- source
Project
Source Configuration block. Detailed below.
The following arguments are optional:
- badge
Enabled Boolean - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - build
Batch ProjectConfig Build Batch Config - Defines the batch build options for the project.
- build
Timeout Integer - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - cache
Project
Cache - Configuration block. Detailed below.
- concurrent
Build IntegerLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- description String
- Short description of the project.
- encryption
Key String - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- file
System List<ProjectLocations File System Location> - A set of file system locations to mount inside the build. File system locations are documented below.
- logs
Config ProjectLogs Config - Configuration block. Detailed below.
- name String
- Project's name.
- project
Visibility String - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - queued
Timeout Integer - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - resource
Access StringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - secondary
Artifacts List<ProjectSecondary Artifact> - Configuration block. Detailed below.
- secondary
Source List<ProjectVersions Secondary Source Version> - Configuration block. Detailed below.
- secondary
Sources List<ProjectSecondary Source> - Configuration block. Detailed below.
- source
Version String - Version of the build input to be built for this project. If not specified, the latest version is used.
- Map<String,String>
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - vpc
Config ProjectVpc Config - Configuration block. Detailed below.
- artifacts
Project
Artifacts - Configuration block. Detailed below.
- environment
Project
Environment - Configuration block. Detailed below.
- service
Role string - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- source
Project
Source Configuration block. Detailed below.
The following arguments are optional:
- badge
Enabled boolean - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - build
Batch ProjectConfig Build Batch Config - Defines the batch build options for the project.
- build
Timeout number - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - cache
Project
Cache - Configuration block. Detailed below.
- concurrent
Build numberLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- description string
- Short description of the project.
- encryption
Key string - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- file
System ProjectLocations File System Location[] - A set of file system locations to mount inside the build. File system locations are documented below.
- logs
Config ProjectLogs Config - Configuration block. Detailed below.
- name string
- Project's name.
- project
Visibility string - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - queued
Timeout number - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - resource
Access stringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - secondary
Artifacts ProjectSecondary Artifact[] - Configuration block. Detailed below.
- secondary
Source ProjectVersions Secondary Source Version[] - Configuration block. Detailed below.
- secondary
Sources ProjectSecondary Source[] - Configuration block. Detailed below.
- source
Version string - Version of the build input to be built for this project. If not specified, the latest version is used.
- {[key: string]: string}
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - vpc
Config ProjectVpc Config - Configuration block. Detailed below.
- artifacts
Project
Artifacts Args - Configuration block. Detailed below.
- environment
Project
Environment Args - Configuration block. Detailed below.
- service_
role str - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- source
Project
Source Args Configuration block. Detailed below.
The following arguments are optional:
- badge_
enabled bool - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - build_
batch_ Projectconfig Build Batch Config Args - Defines the batch build options for the project.
- build_
timeout int - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - cache
Project
Cache Args - Configuration block. Detailed below.
- concurrent_
build_ intlimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- description str
- Short description of the project.
- encryption_
key str - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- file_
system_ Sequence[Projectlocations File System Location Args] - A set of file system locations to mount inside the build. File system locations are documented below.
- logs_
config ProjectLogs Config Args - Configuration block. Detailed below.
- name str
- Project's name.
- project_
visibility str - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - queued_
timeout int - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - resource_
access_ strrole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - secondary_
artifacts Sequence[ProjectSecondary Artifact Args] - Configuration block. Detailed below.
- secondary_
source_ Sequence[Projectversions Secondary Source Version Args] - Configuration block. Detailed below.
- secondary_
sources Sequence[ProjectSecondary Source Args] - Configuration block. Detailed below.
- source_
version str - Version of the build input to be built for this project. If not specified, the latest version is used.
- Mapping[str, str]
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - vpc_
config ProjectVpc Config Args - Configuration block. Detailed below.
- artifacts Property Map
- Configuration block. Detailed below.
- environment Property Map
- Configuration block. Detailed below.
- service
Role String - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- source Property Map
Configuration block. Detailed below.
The following arguments are optional:
- badge
Enabled Boolean - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - build
Batch Property MapConfig - Defines the batch build options for the project.
- build
Timeout Number - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - cache Property Map
- Configuration block. Detailed below.
- concurrent
Build NumberLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- description String
- Short description of the project.
- encryption
Key String - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- file
System List<Property Map>Locations - A set of file system locations to mount inside the build. File system locations are documented below.
- logs
Config Property Map - Configuration block. Detailed below.
- name String
- Project's name.
- project
Visibility String - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - queued
Timeout Number - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - resource
Access StringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - secondary
Artifacts List<Property Map> - Configuration block. Detailed below.
- secondary
Source List<Property Map>Versions - Configuration block. Detailed below.
- secondary
Sources List<Property Map> - Configuration block. Detailed below.
- source
Version String - Version of the build input to be built for this project. If not specified, the latest version is used.
- Map<String>
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - vpc
Config Property Map - Configuration block. Detailed below.
Outputs
All input properties are implicitly available as output properties. Additionally, the Project resource produces the following output properties:
- Arn string
- ARN of the CodeBuild project.
- Badge
Url string - URL of the build badge when
badge_enabledis enabled. - Id string
- The provider-assigned unique ID for this managed resource.
- Public
Project stringAlias - The project identifier used with the public build APIs.
- Dictionary<string, string>
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block.
- Arn string
- ARN of the CodeBuild project.
- Badge
Url string - URL of the build badge when
badge_enabledis enabled. - Id string
- The provider-assigned unique ID for this managed resource.
- Public
Project stringAlias - The project identifier used with the public build APIs.
- map[string]string
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block.
- arn String
- ARN of the CodeBuild project.
- badge
Url String - URL of the build badge when
badge_enabledis enabled. - id String
- The provider-assigned unique ID for this managed resource.
- public
Project StringAlias - The project identifier used with the public build APIs.
- Map<String,String>
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block.
- arn string
- ARN of the CodeBuild project.
- badge
Url string - URL of the build badge when
badge_enabledis enabled. - id string
- The provider-assigned unique ID for this managed resource.
- public
Project stringAlias - The project identifier used with the public build APIs.
- {[key: string]: string}
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block.
- arn str
- ARN of the CodeBuild project.
- badge_
url str - URL of the build badge when
badge_enabledis enabled. - id str
- The provider-assigned unique ID for this managed resource.
- public_
project_ stralias - The project identifier used with the public build APIs.
- Mapping[str, str]
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block.
- arn String
- ARN of the CodeBuild project.
- badge
Url String - URL of the build badge when
badge_enabledis enabled. - id String
- The provider-assigned unique ID for this managed resource.
- public
Project StringAlias - The project identifier used with the public build APIs.
- Map<String>
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block.
Look up Existing Project Resource
Get an existing Project resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.
public static get(name: string, id: Input<ID>, state?: ProjectState, opts?: CustomResourceOptions): Project@staticmethod
def get(resource_name: str,
id: str,
opts: Optional[ResourceOptions] = None,
arn: Optional[str] = None,
artifacts: Optional[ProjectArtifactsArgs] = None,
badge_enabled: Optional[bool] = None,
badge_url: Optional[str] = None,
build_batch_config: Optional[ProjectBuildBatchConfigArgs] = None,
build_timeout: Optional[int] = None,
cache: Optional[ProjectCacheArgs] = None,
concurrent_build_limit: Optional[int] = None,
description: Optional[str] = None,
encryption_key: Optional[str] = None,
environment: Optional[ProjectEnvironmentArgs] = None,
file_system_locations: Optional[Sequence[ProjectFileSystemLocationArgs]] = None,
logs_config: Optional[ProjectLogsConfigArgs] = None,
name: Optional[str] = None,
project_visibility: Optional[str] = None,
public_project_alias: Optional[str] = None,
queued_timeout: Optional[int] = None,
resource_access_role: Optional[str] = None,
secondary_artifacts: Optional[Sequence[ProjectSecondaryArtifactArgs]] = None,
secondary_source_versions: Optional[Sequence[ProjectSecondarySourceVersionArgs]] = None,
secondary_sources: Optional[Sequence[ProjectSecondarySourceArgs]] = None,
service_role: Optional[str] = None,
source: Optional[ProjectSourceArgs] = None,
source_version: Optional[str] = None,
tags: Optional[Mapping[str, str]] = None,
tags_all: Optional[Mapping[str, str]] = None,
vpc_config: Optional[ProjectVpcConfigArgs] = None) -> Projectfunc GetProject(ctx *Context, name string, id IDInput, state *ProjectState, opts ...ResourceOption) (*Project, error)public static Project Get(string name, Input<string> id, ProjectState? state, CustomResourceOptions? opts = null)public static Project get(String name, Output<String> id, ProjectState state, CustomResourceOptions options)Resource lookup is not supported in YAML- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- resource_name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- Arn string
- ARN of the CodeBuild project.
- Artifacts
Project
Artifacts - Configuration block. Detailed below.
- Badge
Enabled bool - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - Badge
Url string - URL of the build badge when
badge_enabledis enabled. - Build
Batch ProjectConfig Build Batch Config - Defines the batch build options for the project.
- Build
Timeout int - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - Cache
Project
Cache - Configuration block. Detailed below.
- Concurrent
Build intLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- Description string
- Short description of the project.
- Encryption
Key string - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- Environment
Project
Environment - Configuration block. Detailed below.
- File
System List<ProjectLocations File System Location> - A set of file system locations to mount inside the build. File system locations are documented below.
- Logs
Config ProjectLogs Config - Configuration block. Detailed below.
- Name string
- Project's name.
- Project
Visibility string - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - Public
Project stringAlias - The project identifier used with the public build APIs.
- Queued
Timeout int - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - Resource
Access stringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - Secondary
Artifacts List<ProjectSecondary Artifact> - Configuration block. Detailed below.
- Secondary
Source List<ProjectVersions Secondary Source Version> - Configuration block. Detailed below.
- Secondary
Sources List<ProjectSecondary Source> - Configuration block. Detailed below.
- Service
Role string - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- Source
Project
Source Configuration block. Detailed below.
The following arguments are optional:
- Source
Version string - Version of the build input to be built for this project. If not specified, the latest version is used.
- Dictionary<string, string>
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - Dictionary<string, string>
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block. - Vpc
Config ProjectVpc Config - Configuration block. Detailed below.
- Arn string
- ARN of the CodeBuild project.
- Artifacts
Project
Artifacts Args - Configuration block. Detailed below.
- Badge
Enabled bool - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - Badge
Url string - URL of the build badge when
badge_enabledis enabled. - Build
Batch ProjectConfig Build Batch Config Args - Defines the batch build options for the project.
- Build
Timeout int - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - Cache
Project
Cache Args - Configuration block. Detailed below.
- Concurrent
Build intLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- Description string
- Short description of the project.
- Encryption
Key string - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- Environment
Project
Environment Args - Configuration block. Detailed below.
- File
System []ProjectLocations File System Location Args - A set of file system locations to mount inside the build. File system locations are documented below.
- Logs
Config ProjectLogs Config Args - Configuration block. Detailed below.
- Name string
- Project's name.
- Project
Visibility string - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - Public
Project stringAlias - The project identifier used with the public build APIs.
- Queued
Timeout int - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - Resource
Access stringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - Secondary
Artifacts []ProjectSecondary Artifact Args - Configuration block. Detailed below.
- Secondary
Source []ProjectVersions Secondary Source Version Args - Configuration block. Detailed below.
- Secondary
Sources []ProjectSecondary Source Args - Configuration block. Detailed below.
- Service
Role string - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- Source
Project
Source Args Configuration block. Detailed below.
The following arguments are optional:
- Source
Version string - Version of the build input to be built for this project. If not specified, the latest version is used.
- map[string]string
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - map[string]string
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block. - Vpc
Config ProjectVpc Config Args - Configuration block. Detailed below.
- arn String
- ARN of the CodeBuild project.
- artifacts
Project
Artifacts - Configuration block. Detailed below.
- badge
Enabled Boolean - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - badge
Url String - URL of the build badge when
badge_enabledis enabled. - build
Batch ProjectConfig Build Batch Config - Defines the batch build options for the project.
- build
Timeout Integer - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - cache
Project
Cache - Configuration block. Detailed below.
- concurrent
Build IntegerLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- description String
- Short description of the project.
- encryption
Key String - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- environment
Project
Environment - Configuration block. Detailed below.
- file
System List<ProjectLocations File System Location> - A set of file system locations to mount inside the build. File system locations are documented below.
- logs
Config ProjectLogs Config - Configuration block. Detailed below.
- name String
- Project's name.
- project
Visibility String - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - public
Project StringAlias - The project identifier used with the public build APIs.
- queued
Timeout Integer - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - resource
Access StringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - secondary
Artifacts List<ProjectSecondary Artifact> - Configuration block. Detailed below.
- secondary
Source List<ProjectVersions Secondary Source Version> - Configuration block. Detailed below.
- secondary
Sources List<ProjectSecondary Source> - Configuration block. Detailed below.
- service
Role String - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- source
Project
Source Configuration block. Detailed below.
The following arguments are optional:
- source
Version String - Version of the build input to be built for this project. If not specified, the latest version is used.
- Map<String,String>
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - Map<String,String>
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block. - vpc
Config ProjectVpc Config - Configuration block. Detailed below.
- arn string
- ARN of the CodeBuild project.
- artifacts
Project
Artifacts - Configuration block. Detailed below.
- badge
Enabled boolean - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - badge
Url string - URL of the build badge when
badge_enabledis enabled. - build
Batch ProjectConfig Build Batch Config - Defines the batch build options for the project.
- build
Timeout number - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - cache
Project
Cache - Configuration block. Detailed below.
- concurrent
Build numberLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- description string
- Short description of the project.
- encryption
Key string - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- environment
Project
Environment - Configuration block. Detailed below.
- file
System ProjectLocations File System Location[] - A set of file system locations to mount inside the build. File system locations are documented below.
- logs
Config ProjectLogs Config - Configuration block. Detailed below.
- name string
- Project's name.
- project
Visibility string - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - public
Project stringAlias - The project identifier used with the public build APIs.
- queued
Timeout number - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - resource
Access stringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - secondary
Artifacts ProjectSecondary Artifact[] - Configuration block. Detailed below.
- secondary
Source ProjectVersions Secondary Source Version[] - Configuration block. Detailed below.
- secondary
Sources ProjectSecondary Source[] - Configuration block. Detailed below.
- service
Role string - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- source
Project
Source Configuration block. Detailed below.
The following arguments are optional:
- source
Version string - Version of the build input to be built for this project. If not specified, the latest version is used.
- {[key: string]: string}
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - {[key: string]: string}
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block. - vpc
Config ProjectVpc Config - Configuration block. Detailed below.
- arn str
- ARN of the CodeBuild project.
- artifacts
Project
Artifacts Args - Configuration block. Detailed below.
- badge_
enabled bool - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - badge_
url str - URL of the build badge when
badge_enabledis enabled. - build_
batch_ Projectconfig Build Batch Config Args - Defines the batch build options for the project.
- build_
timeout int - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - cache
Project
Cache Args - Configuration block. Detailed below.
- concurrent_
build_ intlimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- description str
- Short description of the project.
- encryption_
key str - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- environment
Project
Environment Args - Configuration block. Detailed below.
- file_
system_ Sequence[Projectlocations File System Location Args] - A set of file system locations to mount inside the build. File system locations are documented below.
- logs_
config ProjectLogs Config Args - Configuration block. Detailed below.
- name str
- Project's name.
- project_
visibility str - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - public_
project_ stralias - The project identifier used with the public build APIs.
- queued_
timeout int - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - resource_
access_ strrole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - secondary_
artifacts Sequence[ProjectSecondary Artifact Args] - Configuration block. Detailed below.
- secondary_
source_ Sequence[Projectversions Secondary Source Version Args] - Configuration block. Detailed below.
- secondary_
sources Sequence[ProjectSecondary Source Args] - Configuration block. Detailed below.
- service_
role str - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- source
Project
Source Args Configuration block. Detailed below.
The following arguments are optional:
- source_
version str - Version of the build input to be built for this project. If not specified, the latest version is used.
- Mapping[str, str]
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - Mapping[str, str]
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block. - vpc_
config ProjectVpc Config Args - Configuration block. Detailed below.
- arn String
- ARN of the CodeBuild project.
- artifacts Property Map
- Configuration block. Detailed below.
- badge
Enabled Boolean - Generates a publicly-accessible URL for the projects build badge. Available as
badge_urlattribute when enabled. - badge
Url String - URL of the build badge when
badge_enabledis enabled. - build
Batch Property MapConfig - Defines the batch build options for the project.
- build
Timeout Number - Number of minutes, from 5 to 2160 (36 hours), for AWS CodeBuild to wait until timing out any related build that does not get marked as completed. The default is 60 minutes. The
build_timeoutproperty is not available on theLambdacompute type. - cache Property Map
- Configuration block. Detailed below.
- concurrent
Build NumberLimit - Specify a maximum number of concurrent builds for the project. The value specified must be greater than 0 and less than the account concurrent running builds limit.
- description String
- Short description of the project.
- encryption
Key String - AWS Key Management Service (AWS KMS) customer master key (CMK) to be used for encrypting the build project's build output artifacts.
- environment Property Map
- Configuration block. Detailed below.
- file
System List<Property Map>Locations - A set of file system locations to mount inside the build. File system locations are documented below.
- logs
Config Property Map - Configuration block. Detailed below.
- name String
- Project's name.
- project
Visibility String - Specifies the visibility of the project's builds. Possible values are:
PUBLIC_READandPRIVATE. Default value isPRIVATE. - public
Project StringAlias - The project identifier used with the public build APIs.
- queued
Timeout Number - Number of minutes, from 5 to 480 (8 hours), a build is allowed to be queued before it times out. The default is 8 hours. The
queued_timeoutproperty is not available on theLambdacompute type. - resource
Access StringRole - The ARN of the IAM role that enables CodeBuild to access the CloudWatch Logs and Amazon S3 artifacts for the project's builds in order to display them publicly. Only applicable if
project_visibilityisPUBLIC_READ. - secondary
Artifacts List<Property Map> - Configuration block. Detailed below.
- secondary
Source List<Property Map>Versions - Configuration block. Detailed below.
- secondary
Sources List<Property Map> - Configuration block. Detailed below.
- service
Role String - Amazon Resource Name (ARN) of the AWS Identity and Access Management (IAM) role that enables AWS CodeBuild to interact with dependent AWS services on behalf of the AWS account.
- source Property Map
Configuration block. Detailed below.
The following arguments are optional:
- source
Version String - Version of the build input to be built for this project. If not specified, the latest version is used.
- Map<String>
- Map of tags to assign to the resource. If configured with a provider
default_tagsconfiguration block present, tags with matching keys will overwrite those defined at the provider-level. - Map<String>
- A map of tags assigned to the resource, including those inherited from the provider
default_tagsconfiguration block. - vpc
Config Property Map - Configuration block. Detailed below.
Supporting Types
ProjectArtifacts, ProjectArtifactsArgs
- Type string
- Build output artifact's type. Valid values:
CODEPIPELINE,NO_ARTIFACTS,S3. - Artifact
Identifier string - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- Bucket
Owner stringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - Encryption
Disabled bool - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - Location string
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored. Iftypeis set toS3, this is the name of the output bucket. - Name string
- Name of the project. If
typeis set toS3, this is the name of the output artifact object - Namespace
Type string - Namespace to use in storing build artifacts. If
typeis set toS3, then valid values areBUILD_ID,NONE. - Override
Artifact boolName - Whether a name specified in the build specification overrides the artifact name.
- Packaging string
- Type of build output artifact to create. If
typeis set toS3, valid values areNONE,ZIP - Path string
- If
typeis set toS3, this is the path to the output artifact.
- Type string
- Build output artifact's type. Valid values:
CODEPIPELINE,NO_ARTIFACTS,S3. - Artifact
Identifier string - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- Bucket
Owner stringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - Encryption
Disabled bool - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - Location string
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored. Iftypeis set toS3, this is the name of the output bucket. - Name string
- Name of the project. If
typeis set toS3, this is the name of the output artifact object - Namespace
Type string - Namespace to use in storing build artifacts. If
typeis set toS3, then valid values areBUILD_ID,NONE. - Override
Artifact boolName - Whether a name specified in the build specification overrides the artifact name.
- Packaging string
- Type of build output artifact to create. If
typeis set toS3, valid values areNONE,ZIP - Path string
- If
typeis set toS3, this is the path to the output artifact.
- type String
- Build output artifact's type. Valid values:
CODEPIPELINE,NO_ARTIFACTS,S3. - artifact
Identifier String - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- bucket
Owner StringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption
Disabled Boolean - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - location String
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored. Iftypeis set toS3, this is the name of the output bucket. - name String
- Name of the project. If
typeis set toS3, this is the name of the output artifact object - namespace
Type String - Namespace to use in storing build artifacts. If
typeis set toS3, then valid values areBUILD_ID,NONE. - override
Artifact BooleanName - Whether a name specified in the build specification overrides the artifact name.
- packaging String
- Type of build output artifact to create. If
typeis set toS3, valid values areNONE,ZIP - path String
- If
typeis set toS3, this is the path to the output artifact.
- type string
- Build output artifact's type. Valid values:
CODEPIPELINE,NO_ARTIFACTS,S3. - artifact
Identifier string - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- bucket
Owner stringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption
Disabled boolean - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - location string
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored. Iftypeis set toS3, this is the name of the output bucket. - name string
- Name of the project. If
typeis set toS3, this is the name of the output artifact object - namespace
Type string - Namespace to use in storing build artifacts. If
typeis set toS3, then valid values areBUILD_ID,NONE. - override
Artifact booleanName - Whether a name specified in the build specification overrides the artifact name.
- packaging string
- Type of build output artifact to create. If
typeis set toS3, valid values areNONE,ZIP - path string
- If
typeis set toS3, this is the path to the output artifact.
- type str
- Build output artifact's type. Valid values:
CODEPIPELINE,NO_ARTIFACTS,S3. - artifact_
identifier str - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- bucket_
owner_ straccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption_
disabled bool - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - location str
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored. Iftypeis set toS3, this is the name of the output bucket. - name str
- Name of the project. If
typeis set toS3, this is the name of the output artifact object - namespace_
type str - Namespace to use in storing build artifacts. If
typeis set toS3, then valid values areBUILD_ID,NONE. - override_
artifact_ boolname - Whether a name specified in the build specification overrides the artifact name.
- packaging str
- Type of build output artifact to create. If
typeis set toS3, valid values areNONE,ZIP - path str
- If
typeis set toS3, this is the path to the output artifact.
- type String
- Build output artifact's type. Valid values:
CODEPIPELINE,NO_ARTIFACTS,S3. - artifact
Identifier String - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- bucket
Owner StringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption
Disabled Boolean - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - location String
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored. Iftypeis set toS3, this is the name of the output bucket. - name String
- Name of the project. If
typeis set toS3, this is the name of the output artifact object - namespace
Type String - Namespace to use in storing build artifacts. If
typeis set toS3, then valid values areBUILD_ID,NONE. - override
Artifact BooleanName - Whether a name specified in the build specification overrides the artifact name.
- packaging String
- Type of build output artifact to create. If
typeis set toS3, valid values areNONE,ZIP - path String
- If
typeis set toS3, this is the path to the output artifact.
ProjectBuildBatchConfig, ProjectBuildBatchConfigArgs
- Service
Role string - Specifies the service role ARN for the batch build project.
- Combine
Artifacts bool - Specifies if the build artifacts for the batch build should be combined into a single artifact location.
- Restrictions
Project
Build Batch Config Restrictions - Configuration block specifying the restrictions for the batch build. Detailed below.
- Timeout
In intMins - Specifies the maximum amount of time, in minutes, that the batch build must be completed in.
- Service
Role string - Specifies the service role ARN for the batch build project.
- Combine
Artifacts bool - Specifies if the build artifacts for the batch build should be combined into a single artifact location.
- Restrictions
Project
Build Batch Config Restrictions - Configuration block specifying the restrictions for the batch build. Detailed below.
- Timeout
In intMins - Specifies the maximum amount of time, in minutes, that the batch build must be completed in.
- service
Role String - Specifies the service role ARN for the batch build project.
- combine
Artifacts Boolean - Specifies if the build artifacts for the batch build should be combined into a single artifact location.
- restrictions
Project
Build Batch Config Restrictions - Configuration block specifying the restrictions for the batch build. Detailed below.
- timeout
In IntegerMins - Specifies the maximum amount of time, in minutes, that the batch build must be completed in.
- service
Role string - Specifies the service role ARN for the batch build project.
- combine
Artifacts boolean - Specifies if the build artifacts for the batch build should be combined into a single artifact location.
- restrictions
Project
Build Batch Config Restrictions - Configuration block specifying the restrictions for the batch build. Detailed below.
- timeout
In numberMins - Specifies the maximum amount of time, in minutes, that the batch build must be completed in.
- service_
role str - Specifies the service role ARN for the batch build project.
- combine_
artifacts bool - Specifies if the build artifacts for the batch build should be combined into a single artifact location.
- restrictions
Project
Build Batch Config Restrictions - Configuration block specifying the restrictions for the batch build. Detailed below.
- timeout_
in_ intmins - Specifies the maximum amount of time, in minutes, that the batch build must be completed in.
- service
Role String - Specifies the service role ARN for the batch build project.
- combine
Artifacts Boolean - Specifies if the build artifacts for the batch build should be combined into a single artifact location.
- restrictions Property Map
- Configuration block specifying the restrictions for the batch build. Detailed below.
- timeout
In NumberMins - Specifies the maximum amount of time, in minutes, that the batch build must be completed in.
ProjectBuildBatchConfigRestrictions, ProjectBuildBatchConfigRestrictionsArgs
- Compute
Types List<string>Alloweds - An array of strings that specify the compute types that are allowed for the batch build. See Build environment compute types in the AWS CodeBuild User Guide for these values.
- Maximum
Builds intAllowed - Specifies the maximum number of builds allowed.
- Compute
Types []stringAlloweds - An array of strings that specify the compute types that are allowed for the batch build. See Build environment compute types in the AWS CodeBuild User Guide for these values.
- Maximum
Builds intAllowed - Specifies the maximum number of builds allowed.
- compute
Types List<String>Alloweds - An array of strings that specify the compute types that are allowed for the batch build. See Build environment compute types in the AWS CodeBuild User Guide for these values.
- maximum
Builds IntegerAllowed - Specifies the maximum number of builds allowed.
- compute
Types string[]Alloweds - An array of strings that specify the compute types that are allowed for the batch build. See Build environment compute types in the AWS CodeBuild User Guide for these values.
- maximum
Builds numberAllowed - Specifies the maximum number of builds allowed.
- compute_
types_ Sequence[str]alloweds - An array of strings that specify the compute types that are allowed for the batch build. See Build environment compute types in the AWS CodeBuild User Guide for these values.
- maximum_
builds_ intallowed - Specifies the maximum number of builds allowed.
- compute
Types List<String>Alloweds - An array of strings that specify the compute types that are allowed for the batch build. See Build environment compute types in the AWS CodeBuild User Guide for these values.
- maximum
Builds NumberAllowed - Specifies the maximum number of builds allowed.
ProjectCache, ProjectCacheArgs
- Location string
- Location where the AWS CodeBuild project stores cached resources. For type
S3, the value must be a valid S3 bucket name/prefix. - Modes List<string>
- Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:
LOCAL_SOURCE_CACHE,LOCAL_DOCKER_LAYER_CACHE,LOCAL_CUSTOM_CACHE. - Type string
- Type of storage that will be used for the AWS CodeBuild project cache. Valid values:
NO_CACHE,LOCAL,S3. Defaults toNO_CACHE.
- Location string
- Location where the AWS CodeBuild project stores cached resources. For type
S3, the value must be a valid S3 bucket name/prefix. - Modes []string
- Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:
LOCAL_SOURCE_CACHE,LOCAL_DOCKER_LAYER_CACHE,LOCAL_CUSTOM_CACHE. - Type string
- Type of storage that will be used for the AWS CodeBuild project cache. Valid values:
NO_CACHE,LOCAL,S3. Defaults toNO_CACHE.
- location String
- Location where the AWS CodeBuild project stores cached resources. For type
S3, the value must be a valid S3 bucket name/prefix. - modes List<String>
- Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:
LOCAL_SOURCE_CACHE,LOCAL_DOCKER_LAYER_CACHE,LOCAL_CUSTOM_CACHE. - type String
- Type of storage that will be used for the AWS CodeBuild project cache. Valid values:
NO_CACHE,LOCAL,S3. Defaults toNO_CACHE.
- location string
- Location where the AWS CodeBuild project stores cached resources. For type
S3, the value must be a valid S3 bucket name/prefix. - modes string[]
- Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:
LOCAL_SOURCE_CACHE,LOCAL_DOCKER_LAYER_CACHE,LOCAL_CUSTOM_CACHE. - type string
- Type of storage that will be used for the AWS CodeBuild project cache. Valid values:
NO_CACHE,LOCAL,S3. Defaults toNO_CACHE.
- location str
- Location where the AWS CodeBuild project stores cached resources. For type
S3, the value must be a valid S3 bucket name/prefix. - modes Sequence[str]
- Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:
LOCAL_SOURCE_CACHE,LOCAL_DOCKER_LAYER_CACHE,LOCAL_CUSTOM_CACHE. - type str
- Type of storage that will be used for the AWS CodeBuild project cache. Valid values:
NO_CACHE,LOCAL,S3. Defaults toNO_CACHE.
- location String
- Location where the AWS CodeBuild project stores cached resources. For type
S3, the value must be a valid S3 bucket name/prefix. - modes List<String>
- Specifies settings that AWS CodeBuild uses to store and reuse build dependencies. Valid values:
LOCAL_SOURCE_CACHE,LOCAL_DOCKER_LAYER_CACHE,LOCAL_CUSTOM_CACHE. - type String
- Type of storage that will be used for the AWS CodeBuild project cache. Valid values:
NO_CACHE,LOCAL,S3. Defaults toNO_CACHE.
ProjectEnvironment, ProjectEnvironmentArgs
- Compute
Type string - Information about the compute resources the build project will use. Valid values:
BUILD_GENERAL1_SMALL,BUILD_GENERAL1_MEDIUM,BUILD_GENERAL1_LARGE,BUILD_GENERAL1_2XLARGE,BUILD_LAMBDA_1GB,BUILD_LAMBDA_2GB,BUILD_LAMBDA_4GB,BUILD_LAMBDA_8GB,BUILD_LAMBDA_10GB.BUILD_GENERAL1_SMALLis only valid iftypeis set toLINUX_CONTAINER. Whentypeis set toLINUX_GPU_CONTAINER,compute_typemust beBUILD_GENERAL1_LARGE. Whentypeis set toLINUX_LAMBDA_CONTAINERorARM_LAMBDA_CONTAINER,compute_typemust beBUILD_LAMBDA_XGB.` - Image string
- Docker image to use for this build project. Valid values include Docker images provided by CodeBuild (e.g
aws/codebuild/amazonlinux2-x86_64-standard:4.0), Docker Hub images (e.g.,pulumi/pulumi:latest), and full Docker repository URIs such as those for ECR (e.g.,137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest). - Type string
- Type of build environment to use for related builds. Valid values:
LINUX_CONTAINER,LINUX_GPU_CONTAINER,WINDOWS_CONTAINER(deprecated),WINDOWS_SERVER_2019_CONTAINER,ARM_CONTAINER,LINUX_LAMBDA_CONTAINER,ARM_LAMBDA_CONTAINER. For additional information, see the CodeBuild User Guide. - Certificate string
- ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
- Environment
Variables List<ProjectEnvironment Environment Variable> - Configuration block. Detailed below.
- Fleet
Project
Environment Fleet - Configuration block. Detailed below.
- Image
Pull stringCredentials Type - Type of credentials AWS CodeBuild uses to pull images in your build. Valid values:
CODEBUILD,SERVICE_ROLE. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults toCODEBUILD. - Privileged
Mode bool - Whether to enable running the Docker daemon inside a Docker container. Defaults to
false. - Registry
Credential ProjectEnvironment Registry Credential - Configuration block. Detailed below.
- Compute
Type string - Information about the compute resources the build project will use. Valid values:
BUILD_GENERAL1_SMALL,BUILD_GENERAL1_MEDIUM,BUILD_GENERAL1_LARGE,BUILD_GENERAL1_2XLARGE,BUILD_LAMBDA_1GB,BUILD_LAMBDA_2GB,BUILD_LAMBDA_4GB,BUILD_LAMBDA_8GB,BUILD_LAMBDA_10GB.BUILD_GENERAL1_SMALLis only valid iftypeis set toLINUX_CONTAINER. Whentypeis set toLINUX_GPU_CONTAINER,compute_typemust beBUILD_GENERAL1_LARGE. Whentypeis set toLINUX_LAMBDA_CONTAINERorARM_LAMBDA_CONTAINER,compute_typemust beBUILD_LAMBDA_XGB.` - Image string
- Docker image to use for this build project. Valid values include Docker images provided by CodeBuild (e.g
aws/codebuild/amazonlinux2-x86_64-standard:4.0), Docker Hub images (e.g.,pulumi/pulumi:latest), and full Docker repository URIs such as those for ECR (e.g.,137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest). - Type string
- Type of build environment to use for related builds. Valid values:
LINUX_CONTAINER,LINUX_GPU_CONTAINER,WINDOWS_CONTAINER(deprecated),WINDOWS_SERVER_2019_CONTAINER,ARM_CONTAINER,LINUX_LAMBDA_CONTAINER,ARM_LAMBDA_CONTAINER. For additional information, see the CodeBuild User Guide. - Certificate string
- ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
- Environment
Variables []ProjectEnvironment Environment Variable - Configuration block. Detailed below.
- Fleet
Project
Environment Fleet - Configuration block. Detailed below.
- Image
Pull stringCredentials Type - Type of credentials AWS CodeBuild uses to pull images in your build. Valid values:
CODEBUILD,SERVICE_ROLE. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults toCODEBUILD. - Privileged
Mode bool - Whether to enable running the Docker daemon inside a Docker container. Defaults to
false. - Registry
Credential ProjectEnvironment Registry Credential - Configuration block. Detailed below.
- compute
Type String - Information about the compute resources the build project will use. Valid values:
BUILD_GENERAL1_SMALL,BUILD_GENERAL1_MEDIUM,BUILD_GENERAL1_LARGE,BUILD_GENERAL1_2XLARGE,BUILD_LAMBDA_1GB,BUILD_LAMBDA_2GB,BUILD_LAMBDA_4GB,BUILD_LAMBDA_8GB,BUILD_LAMBDA_10GB.BUILD_GENERAL1_SMALLis only valid iftypeis set toLINUX_CONTAINER. Whentypeis set toLINUX_GPU_CONTAINER,compute_typemust beBUILD_GENERAL1_LARGE. Whentypeis set toLINUX_LAMBDA_CONTAINERorARM_LAMBDA_CONTAINER,compute_typemust beBUILD_LAMBDA_XGB.` - image String
- Docker image to use for this build project. Valid values include Docker images provided by CodeBuild (e.g
aws/codebuild/amazonlinux2-x86_64-standard:4.0), Docker Hub images (e.g.,pulumi/pulumi:latest), and full Docker repository URIs such as those for ECR (e.g.,137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest). - type String
- Type of build environment to use for related builds. Valid values:
LINUX_CONTAINER,LINUX_GPU_CONTAINER,WINDOWS_CONTAINER(deprecated),WINDOWS_SERVER_2019_CONTAINER,ARM_CONTAINER,LINUX_LAMBDA_CONTAINER,ARM_LAMBDA_CONTAINER. For additional information, see the CodeBuild User Guide. - certificate String
- ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
- environment
Variables List<ProjectEnvironment Environment Variable> - Configuration block. Detailed below.
- fleet
Project
Environment Fleet - Configuration block. Detailed below.
- image
Pull StringCredentials Type - Type of credentials AWS CodeBuild uses to pull images in your build. Valid values:
CODEBUILD,SERVICE_ROLE. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults toCODEBUILD. - privileged
Mode Boolean - Whether to enable running the Docker daemon inside a Docker container. Defaults to
false. - registry
Credential ProjectEnvironment Registry Credential - Configuration block. Detailed below.
- compute
Type string - Information about the compute resources the build project will use. Valid values:
BUILD_GENERAL1_SMALL,BUILD_GENERAL1_MEDIUM,BUILD_GENERAL1_LARGE,BUILD_GENERAL1_2XLARGE,BUILD_LAMBDA_1GB,BUILD_LAMBDA_2GB,BUILD_LAMBDA_4GB,BUILD_LAMBDA_8GB,BUILD_LAMBDA_10GB.BUILD_GENERAL1_SMALLis only valid iftypeis set toLINUX_CONTAINER. Whentypeis set toLINUX_GPU_CONTAINER,compute_typemust beBUILD_GENERAL1_LARGE. Whentypeis set toLINUX_LAMBDA_CONTAINERorARM_LAMBDA_CONTAINER,compute_typemust beBUILD_LAMBDA_XGB.` - image string
- Docker image to use for this build project. Valid values include Docker images provided by CodeBuild (e.g
aws/codebuild/amazonlinux2-x86_64-standard:4.0), Docker Hub images (e.g.,pulumi/pulumi:latest), and full Docker repository URIs such as those for ECR (e.g.,137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest). - type string
- Type of build environment to use for related builds. Valid values:
LINUX_CONTAINER,LINUX_GPU_CONTAINER,WINDOWS_CONTAINER(deprecated),WINDOWS_SERVER_2019_CONTAINER,ARM_CONTAINER,LINUX_LAMBDA_CONTAINER,ARM_LAMBDA_CONTAINER. For additional information, see the CodeBuild User Guide. - certificate string
- ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
- environment
Variables ProjectEnvironment Environment Variable[] - Configuration block. Detailed below.
- fleet
Project
Environment Fleet - Configuration block. Detailed below.
- image
Pull stringCredentials Type - Type of credentials AWS CodeBuild uses to pull images in your build. Valid values:
CODEBUILD,SERVICE_ROLE. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults toCODEBUILD. - privileged
Mode boolean - Whether to enable running the Docker daemon inside a Docker container. Defaults to
false. - registry
Credential ProjectEnvironment Registry Credential - Configuration block. Detailed below.
- compute_
type str - Information about the compute resources the build project will use. Valid values:
BUILD_GENERAL1_SMALL,BUILD_GENERAL1_MEDIUM,BUILD_GENERAL1_LARGE,BUILD_GENERAL1_2XLARGE,BUILD_LAMBDA_1GB,BUILD_LAMBDA_2GB,BUILD_LAMBDA_4GB,BUILD_LAMBDA_8GB,BUILD_LAMBDA_10GB.BUILD_GENERAL1_SMALLis only valid iftypeis set toLINUX_CONTAINER. Whentypeis set toLINUX_GPU_CONTAINER,compute_typemust beBUILD_GENERAL1_LARGE. Whentypeis set toLINUX_LAMBDA_CONTAINERorARM_LAMBDA_CONTAINER,compute_typemust beBUILD_LAMBDA_XGB.` - image str
- Docker image to use for this build project. Valid values include Docker images provided by CodeBuild (e.g
aws/codebuild/amazonlinux2-x86_64-standard:4.0), Docker Hub images (e.g.,pulumi/pulumi:latest), and full Docker repository URIs such as those for ECR (e.g.,137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest). - type str
- Type of build environment to use for related builds. Valid values:
LINUX_CONTAINER,LINUX_GPU_CONTAINER,WINDOWS_CONTAINER(deprecated),WINDOWS_SERVER_2019_CONTAINER,ARM_CONTAINER,LINUX_LAMBDA_CONTAINER,ARM_LAMBDA_CONTAINER. For additional information, see the CodeBuild User Guide. - certificate str
- ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
- environment_
variables Sequence[ProjectEnvironment Environment Variable] - Configuration block. Detailed below.
- fleet
Project
Environment Fleet - Configuration block. Detailed below.
- image_
pull_ strcredentials_ type - Type of credentials AWS CodeBuild uses to pull images in your build. Valid values:
CODEBUILD,SERVICE_ROLE. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults toCODEBUILD. - privileged_
mode bool - Whether to enable running the Docker daemon inside a Docker container. Defaults to
false. - registry_
credential ProjectEnvironment Registry Credential - Configuration block. Detailed below.
- compute
Type String - Information about the compute resources the build project will use. Valid values:
BUILD_GENERAL1_SMALL,BUILD_GENERAL1_MEDIUM,BUILD_GENERAL1_LARGE,BUILD_GENERAL1_2XLARGE,BUILD_LAMBDA_1GB,BUILD_LAMBDA_2GB,BUILD_LAMBDA_4GB,BUILD_LAMBDA_8GB,BUILD_LAMBDA_10GB.BUILD_GENERAL1_SMALLis only valid iftypeis set toLINUX_CONTAINER. Whentypeis set toLINUX_GPU_CONTAINER,compute_typemust beBUILD_GENERAL1_LARGE. Whentypeis set toLINUX_LAMBDA_CONTAINERorARM_LAMBDA_CONTAINER,compute_typemust beBUILD_LAMBDA_XGB.` - image String
- Docker image to use for this build project. Valid values include Docker images provided by CodeBuild (e.g
aws/codebuild/amazonlinux2-x86_64-standard:4.0), Docker Hub images (e.g.,pulumi/pulumi:latest), and full Docker repository URIs such as those for ECR (e.g.,137112412989.dkr.ecr.us-west-2.amazonaws.com/amazonlinux:latest). - type String
- Type of build environment to use for related builds. Valid values:
LINUX_CONTAINER,LINUX_GPU_CONTAINER,WINDOWS_CONTAINER(deprecated),WINDOWS_SERVER_2019_CONTAINER,ARM_CONTAINER,LINUX_LAMBDA_CONTAINER,ARM_LAMBDA_CONTAINER. For additional information, see the CodeBuild User Guide. - certificate String
- ARN of the S3 bucket, path prefix and object key that contains the PEM-encoded certificate.
- environment
Variables List<Property Map> - Configuration block. Detailed below.
- fleet Property Map
- Configuration block. Detailed below.
- image
Pull StringCredentials Type - Type of credentials AWS CodeBuild uses to pull images in your build. Valid values:
CODEBUILD,SERVICE_ROLE. When you use a cross-account or private registry image, you must use SERVICE_ROLE credentials. When you use an AWS CodeBuild curated image, you must use CodeBuild credentials. Defaults toCODEBUILD. - privileged
Mode Boolean - Whether to enable running the Docker daemon inside a Docker container. Defaults to
false. - registry
Credential Property Map - Configuration block. Detailed below.
ProjectEnvironmentEnvironmentVariable, ProjectEnvironmentEnvironmentVariableArgs
ProjectEnvironmentFleet, ProjectEnvironmentFleetArgs
- Fleet
Arn string - Compute fleet ARN for the build project.
- Fleet
Arn string - Compute fleet ARN for the build project.
- fleet
Arn String - Compute fleet ARN for the build project.
- fleet
Arn string - Compute fleet ARN for the build project.
- fleet_
arn str - Compute fleet ARN for the build project.
- fleet
Arn String - Compute fleet ARN for the build project.
ProjectEnvironmentRegistryCredential, ProjectEnvironmentRegistryCredentialArgs
- Credential string
- ARN or name of credentials created using AWS Secrets Manager.
- Credential
Provider string - Service that created the credentials to access a private Docker registry. Valid value:
SECRETS_MANAGER(AWS Secrets Manager).
- Credential string
- ARN or name of credentials created using AWS Secrets Manager.
- Credential
Provider string - Service that created the credentials to access a private Docker registry. Valid value:
SECRETS_MANAGER(AWS Secrets Manager).
- credential String
- ARN or name of credentials created using AWS Secrets Manager.
- credential
Provider String - Service that created the credentials to access a private Docker registry. Valid value:
SECRETS_MANAGER(AWS Secrets Manager).
- credential string
- ARN or name of credentials created using AWS Secrets Manager.
- credential
Provider string - Service that created the credentials to access a private Docker registry. Valid value:
SECRETS_MANAGER(AWS Secrets Manager).
- credential str
- ARN or name of credentials created using AWS Secrets Manager.
- credential_
provider str - Service that created the credentials to access a private Docker registry. Valid value:
SECRETS_MANAGER(AWS Secrets Manager).
- credential String
- ARN or name of credentials created using AWS Secrets Manager.
- credential
Provider String - Service that created the credentials to access a private Docker registry. Valid value:
SECRETS_MANAGER(AWS Secrets Manager).
ProjectFileSystemLocation, ProjectFileSystemLocationArgs
- Identifier string
- The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_. For example, if you specify my-efs for identifier, a new environment variable is create named CODEBUILD_MY-EFS.
- Location string
- A string that specifies the location of the file system created by Amazon EFS. Its format is
efs-dns-name:/directory-path. - Mount
Options string - The mount options for a file system created by AWS EFS.
- Mount
Point string - The location in the container where you mount the file system.
- Type string
- The type of the file system. The one supported type is
EFS.
- Identifier string
- The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_. For example, if you specify my-efs for identifier, a new environment variable is create named CODEBUILD_MY-EFS.
- Location string
- A string that specifies the location of the file system created by Amazon EFS. Its format is
efs-dns-name:/directory-path. - Mount
Options string - The mount options for a file system created by AWS EFS.
- Mount
Point string - The location in the container where you mount the file system.
- Type string
- The type of the file system. The one supported type is
EFS.
- identifier String
- The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_. For example, if you specify my-efs for identifier, a new environment variable is create named CODEBUILD_MY-EFS.
- location String
- A string that specifies the location of the file system created by Amazon EFS. Its format is
efs-dns-name:/directory-path. - mount
Options String - The mount options for a file system created by AWS EFS.
- mount
Point String - The location in the container where you mount the file system.
- type String
- The type of the file system. The one supported type is
EFS.
- identifier string
- The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_. For example, if you specify my-efs for identifier, a new environment variable is create named CODEBUILD_MY-EFS.
- location string
- A string that specifies the location of the file system created by Amazon EFS. Its format is
efs-dns-name:/directory-path. - mount
Options string - The mount options for a file system created by AWS EFS.
- mount
Point string - The location in the container where you mount the file system.
- type string
- The type of the file system. The one supported type is
EFS.
- identifier str
- The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_. For example, if you specify my-efs for identifier, a new environment variable is create named CODEBUILD_MY-EFS.
- location str
- A string that specifies the location of the file system created by Amazon EFS. Its format is
efs-dns-name:/directory-path. - mount_
options str - The mount options for a file system created by AWS EFS.
- mount_
point str - The location in the container where you mount the file system.
- type str
- The type of the file system. The one supported type is
EFS.
- identifier String
- The name used to access a file system created by Amazon EFS. CodeBuild creates an environment variable by appending the identifier in all capital letters to CODEBUILD_. For example, if you specify my-efs for identifier, a new environment variable is create named CODEBUILD_MY-EFS.
- location String
- A string that specifies the location of the file system created by Amazon EFS. Its format is
efs-dns-name:/directory-path. - mount
Options String - The mount options for a file system created by AWS EFS.
- mount
Point String - The location in the container where you mount the file system.
- type String
- The type of the file system. The one supported type is
EFS.
ProjectLogsConfig, ProjectLogsConfigArgs
- Cloudwatch
Logs ProjectLogs Config Cloudwatch Logs - Configuration block. Detailed below.
- S3Logs
Project
Logs Config S3Logs - Configuration block. Detailed below.
- Cloudwatch
Logs ProjectLogs Config Cloudwatch Logs - Configuration block. Detailed below.
- S3Logs
Project
Logs Config S3Logs - Configuration block. Detailed below.
- cloudwatch
Logs ProjectLogs Config Cloudwatch Logs - Configuration block. Detailed below.
- s3Logs
Project
Logs Config S3Logs - Configuration block. Detailed below.
- cloudwatch
Logs ProjectLogs Config Cloudwatch Logs - Configuration block. Detailed below.
- s3Logs
Project
Logs Config S3Logs - Configuration block. Detailed below.
- cloudwatch_
logs ProjectLogs Config Cloudwatch Logs - Configuration block. Detailed below.
- s3_
logs ProjectLogs Config S3Logs - Configuration block. Detailed below.
- cloudwatch
Logs Property Map - Configuration block. Detailed below.
- s3Logs Property Map
- Configuration block. Detailed below.
ProjectLogsConfigCloudwatchLogs, ProjectLogsConfigCloudwatchLogsArgs
- Group
Name string - Group name of the logs in CloudWatch Logs.
- Status string
- Current status of logs in CloudWatch Logs for a build project. Valid values:
ENABLED,DISABLED. Defaults toENABLED. - Stream
Name string - Prefix of the log stream name of the logs in CloudWatch Logs.
- Group
Name string - Group name of the logs in CloudWatch Logs.
- Status string
- Current status of logs in CloudWatch Logs for a build project. Valid values:
ENABLED,DISABLED. Defaults toENABLED. - Stream
Name string - Prefix of the log stream name of the logs in CloudWatch Logs.
- group
Name String - Group name of the logs in CloudWatch Logs.
- status String
- Current status of logs in CloudWatch Logs for a build project. Valid values:
ENABLED,DISABLED. Defaults toENABLED. - stream
Name String - Prefix of the log stream name of the logs in CloudWatch Logs.
- group
Name string - Group name of the logs in CloudWatch Logs.
- status string
- Current status of logs in CloudWatch Logs for a build project. Valid values:
ENABLED,DISABLED. Defaults toENABLED. - stream
Name string - Prefix of the log stream name of the logs in CloudWatch Logs.
- group_
name str - Group name of the logs in CloudWatch Logs.
- status str
- Current status of logs in CloudWatch Logs for a build project. Valid values:
ENABLED,DISABLED. Defaults toENABLED. - stream_
name str - Prefix of the log stream name of the logs in CloudWatch Logs.
- group
Name String - Group name of the logs in CloudWatch Logs.
- status String
- Current status of logs in CloudWatch Logs for a build project. Valid values:
ENABLED,DISABLED. Defaults toENABLED. - stream
Name String - Prefix of the log stream name of the logs in CloudWatch Logs.
ProjectLogsConfigS3Logs, ProjectLogsConfigS3LogsArgs
- Bucket
Owner stringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - Encryption
Disabled bool - Whether to disable encrypting S3 logs. Defaults to
false. - Location string
- Name of the S3 bucket and the path prefix for S3 logs. Must be set if status is
ENABLED, otherwise it must be empty. - Status string
- Current status of logs in S3 for a build project. Valid values:
ENABLED,DISABLED. Defaults toDISABLED.
- Bucket
Owner stringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - Encryption
Disabled bool - Whether to disable encrypting S3 logs. Defaults to
false. - Location string
- Name of the S3 bucket and the path prefix for S3 logs. Must be set if status is
ENABLED, otherwise it must be empty. - Status string
- Current status of logs in S3 for a build project. Valid values:
ENABLED,DISABLED. Defaults toDISABLED.
- bucket
Owner StringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption
Disabled Boolean - Whether to disable encrypting S3 logs. Defaults to
false. - location String
- Name of the S3 bucket and the path prefix for S3 logs. Must be set if status is
ENABLED, otherwise it must be empty. - status String
- Current status of logs in S3 for a build project. Valid values:
ENABLED,DISABLED. Defaults toDISABLED.
- bucket
Owner stringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption
Disabled boolean - Whether to disable encrypting S3 logs. Defaults to
false. - location string
- Name of the S3 bucket and the path prefix for S3 logs. Must be set if status is
ENABLED, otherwise it must be empty. - status string
- Current status of logs in S3 for a build project. Valid values:
ENABLED,DISABLED. Defaults toDISABLED.
- bucket_
owner_ straccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption_
disabled bool - Whether to disable encrypting S3 logs. Defaults to
false. - location str
- Name of the S3 bucket and the path prefix for S3 logs. Must be set if status is
ENABLED, otherwise it must be empty. - status str
- Current status of logs in S3 for a build project. Valid values:
ENABLED,DISABLED. Defaults toDISABLED.
- bucket
Owner StringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. your CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption
Disabled Boolean - Whether to disable encrypting S3 logs. Defaults to
false. - location String
- Name of the S3 bucket and the path prefix for S3 logs. Must be set if status is
ENABLED, otherwise it must be empty. - status String
- Current status of logs in S3 for a build project. Valid values:
ENABLED,DISABLED. Defaults toDISABLED.
ProjectSecondaryArtifact, ProjectSecondaryArtifactArgs
- Artifact
Identifier string - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- Type string
- Build output artifact's type. Valid values
CODEPIPELINE,NO_ARTIFACTS, andS3. - Bucket
Owner stringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. The CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - Encryption
Disabled bool - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - Location string
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output bucket. Ifpathis not specified,locationcan specify the path of the output artifact in the output bucket. - Name string
- Name of the project. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output artifact object. - Namespace
Type string - Namespace to use in storing build artifacts. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areBUILD_IDorNONE. - Override
Artifact boolName - Whether a name specified in the build specification overrides the artifact name.
- Packaging string
- Type of build output artifact to create. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areNONEorZIP. - Path string
- Along with
namespace_typeandname, the pattern that AWS CodeBuild uses to name and store the output artifact. Iftypeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the path to the output artifact.
- Artifact
Identifier string - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- Type string
- Build output artifact's type. Valid values
CODEPIPELINE,NO_ARTIFACTS, andS3. - Bucket
Owner stringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. The CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - Encryption
Disabled bool - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - Location string
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output bucket. Ifpathis not specified,locationcan specify the path of the output artifact in the output bucket. - Name string
- Name of the project. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output artifact object. - Namespace
Type string - Namespace to use in storing build artifacts. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areBUILD_IDorNONE. - Override
Artifact boolName - Whether a name specified in the build specification overrides the artifact name.
- Packaging string
- Type of build output artifact to create. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areNONEorZIP. - Path string
- Along with
namespace_typeandname, the pattern that AWS CodeBuild uses to name and store the output artifact. Iftypeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the path to the output artifact.
- artifact
Identifier String - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- type String
- Build output artifact's type. Valid values
CODEPIPELINE,NO_ARTIFACTS, andS3. - bucket
Owner StringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. The CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption
Disabled Boolean - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - location String
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output bucket. Ifpathis not specified,locationcan specify the path of the output artifact in the output bucket. - name String
- Name of the project. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output artifact object. - namespace
Type String - Namespace to use in storing build artifacts. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areBUILD_IDorNONE. - override
Artifact BooleanName - Whether a name specified in the build specification overrides the artifact name.
- packaging String
- Type of build output artifact to create. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areNONEorZIP. - path String
- Along with
namespace_typeandname, the pattern that AWS CodeBuild uses to name and store the output artifact. Iftypeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the path to the output artifact.
- artifact
Identifier string - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- type string
- Build output artifact's type. Valid values
CODEPIPELINE,NO_ARTIFACTS, andS3. - bucket
Owner stringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. The CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption
Disabled boolean - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - location string
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output bucket. Ifpathis not specified,locationcan specify the path of the output artifact in the output bucket. - name string
- Name of the project. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output artifact object. - namespace
Type string - Namespace to use in storing build artifacts. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areBUILD_IDorNONE. - override
Artifact booleanName - Whether a name specified in the build specification overrides the artifact name.
- packaging string
- Type of build output artifact to create. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areNONEorZIP. - path string
- Along with
namespace_typeandname, the pattern that AWS CodeBuild uses to name and store the output artifact. Iftypeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the path to the output artifact.
- artifact_
identifier str - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- type str
- Build output artifact's type. Valid values
CODEPIPELINE,NO_ARTIFACTS, andS3. - bucket_
owner_ straccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. The CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption_
disabled bool - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - location str
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output bucket. Ifpathis not specified,locationcan specify the path of the output artifact in the output bucket. - name str
- Name of the project. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output artifact object. - namespace_
type str - Namespace to use in storing build artifacts. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areBUILD_IDorNONE. - override_
artifact_ boolname - Whether a name specified in the build specification overrides the artifact name.
- packaging str
- Type of build output artifact to create. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areNONEorZIP. - path str
- Along with
namespace_typeandname, the pattern that AWS CodeBuild uses to name and store the output artifact. Iftypeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the path to the output artifact.
- artifact
Identifier String - Artifact identifier. Must be the same specified inside the AWS CodeBuild build specification.
- type String
- Build output artifact's type. Valid values
CODEPIPELINE,NO_ARTIFACTS, andS3. - bucket
Owner StringAccess - Specifies the bucket owner's access for objects that another account uploads to their Amazon S3 bucket. By default, only the account that uploads the objects to the bucket has access to these objects. This property allows you to give the bucket owner access to these objects. Valid values are
NONE,READ_ONLY, andFULL. The CodeBuild service role must have thes3:PutBucketAclpermission. This permission allows CodeBuild to modify the access control list for the bucket. - encryption
Disabled Boolean - Whether to disable encrypting output artifacts. If
typeis set toNO_ARTIFACTS, this value is ignored. Defaults tofalse. - location String
- Information about the build output artifact location. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output bucket. Ifpathis not specified,locationcan specify the path of the output artifact in the output bucket. - name String
- Name of the project. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the name of the output artifact object. - namespace
Type String - Namespace to use in storing build artifacts. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areBUILD_IDorNONE. - override
Artifact BooleanName - Whether a name specified in the build specification overrides the artifact name.
- packaging String
- Type of build output artifact to create. If
typeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, valid values areNONEorZIP. - path String
- Along with
namespace_typeandname, the pattern that AWS CodeBuild uses to name and store the output artifact. Iftypeis set toCODEPIPELINEorNO_ARTIFACTS, this value is ignored if specified. Iftypeis set toS3, this is the path to the output artifact.
ProjectSecondarySource, ProjectSecondarySourceArgs
- Source
Identifier string - An identifier for this project source. The identifier can only contain alphanumeric characters and underscores, and must be less than 128 characters in length.
- Type string
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - Build
Status ProjectConfig Secondary Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - Buildspec string
- The build spec declaration to use for this build project's related builds. This must be set when
typeisNO_SOURCE. It can either be a path to a file residing in the repository to be built or a local file path leveraging thefile()built-in. - Git
Clone intDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - Git
Submodules ProjectConfig Secondary Source Git Submodules Config - Configuration block. Detailed below.
- Insecure
Ssl bool - Ignore SSL warnings when connecting to source control.
- Location string
- Location of the source code from git or s3.
- Report
Build boolStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- Source
Identifier string - An identifier for this project source. The identifier can only contain alphanumeric characters and underscores, and must be less than 128 characters in length.
- Type string
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - Build
Status ProjectConfig Secondary Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - Buildspec string
- The build spec declaration to use for this build project's related builds. This must be set when
typeisNO_SOURCE. It can either be a path to a file residing in the repository to be built or a local file path leveraging thefile()built-in. - Git
Clone intDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - Git
Submodules ProjectConfig Secondary Source Git Submodules Config - Configuration block. Detailed below.
- Insecure
Ssl bool - Ignore SSL warnings when connecting to source control.
- Location string
- Location of the source code from git or s3.
- Report
Build boolStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- source
Identifier String - An identifier for this project source. The identifier can only contain alphanumeric characters and underscores, and must be less than 128 characters in length.
- type String
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - build
Status ProjectConfig Secondary Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - buildspec String
- The build spec declaration to use for this build project's related builds. This must be set when
typeisNO_SOURCE. It can either be a path to a file residing in the repository to be built or a local file path leveraging thefile()built-in. - git
Clone IntegerDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - git
Submodules ProjectConfig Secondary Source Git Submodules Config - Configuration block. Detailed below.
- insecure
Ssl Boolean - Ignore SSL warnings when connecting to source control.
- location String
- Location of the source code from git or s3.
- report
Build BooleanStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- source
Identifier string - An identifier for this project source. The identifier can only contain alphanumeric characters and underscores, and must be less than 128 characters in length.
- type string
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - build
Status ProjectConfig Secondary Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - buildspec string
- The build spec declaration to use for this build project's related builds. This must be set when
typeisNO_SOURCE. It can either be a path to a file residing in the repository to be built or a local file path leveraging thefile()built-in. - git
Clone numberDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - git
Submodules ProjectConfig Secondary Source Git Submodules Config - Configuration block. Detailed below.
- insecure
Ssl boolean - Ignore SSL warnings when connecting to source control.
- location string
- Location of the source code from git or s3.
- report
Build booleanStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- source_
identifier str - An identifier for this project source. The identifier can only contain alphanumeric characters and underscores, and must be less than 128 characters in length.
- type str
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - build_
status_ Projectconfig Secondary Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - buildspec str
- The build spec declaration to use for this build project's related builds. This must be set when
typeisNO_SOURCE. It can either be a path to a file residing in the repository to be built or a local file path leveraging thefile()built-in. - git_
clone_ intdepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - git_
submodules_ Projectconfig Secondary Source Git Submodules Config - Configuration block. Detailed below.
- insecure_
ssl bool - Ignore SSL warnings when connecting to source control.
- location str
- Location of the source code from git or s3.
- report_
build_ boolstatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- source
Identifier String - An identifier for this project source. The identifier can only contain alphanumeric characters and underscores, and must be less than 128 characters in length.
- type String
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - build
Status Property MapConfig - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - buildspec String
- The build spec declaration to use for this build project's related builds. This must be set when
typeisNO_SOURCE. It can either be a path to a file residing in the repository to be built or a local file path leveraging thefile()built-in. - git
Clone NumberDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - git
Submodules Property MapConfig - Configuration block. Detailed below.
- insecure
Ssl Boolean - Ignore SSL warnings when connecting to source control.
- location String
- Location of the source code from git or s3.
- report
Build BooleanStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
ProjectSecondarySourceBuildStatusConfig, ProjectSecondarySourceBuildStatusConfigArgs
- Context string
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- Target
Url string - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- Context string
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- Target
Url string - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- context String
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- target
Url String - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- context string
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- target
Url string - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- context str
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- target_
url str - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- context String
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- target
Url String - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
ProjectSecondarySourceGitSubmodulesConfig, ProjectSecondarySourceGitSubmodulesConfigArgs
- Fetch
Submodules bool - Whether to fetch Git submodules for the AWS CodeBuild build project.
- Fetch
Submodules bool - Whether to fetch Git submodules for the AWS CodeBuild build project.
- fetch
Submodules Boolean - Whether to fetch Git submodules for the AWS CodeBuild build project.
- fetch
Submodules boolean - Whether to fetch Git submodules for the AWS CodeBuild build project.
- fetch_
submodules bool - Whether to fetch Git submodules for the AWS CodeBuild build project.
- fetch
Submodules Boolean - Whether to fetch Git submodules for the AWS CodeBuild build project.
ProjectSecondarySourceVersion, ProjectSecondarySourceVersionArgs
- Source
Identifier string - An identifier for a source in the build project.
- Source
Version string - The source version for the corresponding source identifier. See AWS docs for more details.
- Source
Identifier string - An identifier for a source in the build project.
- Source
Version string - The source version for the corresponding source identifier. See AWS docs for more details.
- source
Identifier String - An identifier for a source in the build project.
- source
Version String - The source version for the corresponding source identifier. See AWS docs for more details.
- source
Identifier string - An identifier for a source in the build project.
- source
Version string - The source version for the corresponding source identifier. See AWS docs for more details.
- source_
identifier str - An identifier for a source in the build project.
- source_
version str - The source version for the corresponding source identifier. See AWS docs for more details.
- source
Identifier String - An identifier for a source in the build project.
- source
Version String - The source version for the corresponding source identifier. See AWS docs for more details.
ProjectSource, ProjectSourceArgs
- Type string
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - Build
Status ProjectConfig Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - Buildspec string
- Build specification to use for this build project's related builds. This must be set when
typeisNO_SOURCE. Also, if a non-default buildspec file name or file path aside from the root is used, it must be specified. - Git
Clone intDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - Git
Submodules ProjectConfig Source Git Submodules Config - Configuration block. Detailed below.
- Insecure
Ssl bool - Ignore SSL warnings when connecting to source control.
- Location string
- Location of the source code from git or s3.
- Report
Build boolStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- Type string
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - Build
Status ProjectConfig Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - Buildspec string
- Build specification to use for this build project's related builds. This must be set when
typeisNO_SOURCE. Also, if a non-default buildspec file name or file path aside from the root is used, it must be specified. - Git
Clone intDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - Git
Submodules ProjectConfig Source Git Submodules Config - Configuration block. Detailed below.
- Insecure
Ssl bool - Ignore SSL warnings when connecting to source control.
- Location string
- Location of the source code from git or s3.
- Report
Build boolStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- type String
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - build
Status ProjectConfig Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - buildspec String
- Build specification to use for this build project's related builds. This must be set when
typeisNO_SOURCE. Also, if a non-default buildspec file name or file path aside from the root is used, it must be specified. - git
Clone IntegerDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - git
Submodules ProjectConfig Source Git Submodules Config - Configuration block. Detailed below.
- insecure
Ssl Boolean - Ignore SSL warnings when connecting to source control.
- location String
- Location of the source code from git or s3.
- report
Build BooleanStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- type string
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - build
Status ProjectConfig Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - buildspec string
- Build specification to use for this build project's related builds. This must be set when
typeisNO_SOURCE. Also, if a non-default buildspec file name or file path aside from the root is used, it must be specified. - git
Clone numberDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - git
Submodules ProjectConfig Source Git Submodules Config - Configuration block. Detailed below.
- insecure
Ssl boolean - Ignore SSL warnings when connecting to source control.
- location string
- Location of the source code from git or s3.
- report
Build booleanStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- type str
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - build_
status_ Projectconfig Source Build Status Config - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - buildspec str
- Build specification to use for this build project's related builds. This must be set when
typeisNO_SOURCE. Also, if a non-default buildspec file name or file path aside from the root is used, it must be specified. - git_
clone_ intdepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - git_
submodules_ Projectconfig Source Git Submodules Config - Configuration block. Detailed below.
- insecure_
ssl bool - Ignore SSL warnings when connecting to source control.
- location str
- Location of the source code from git or s3.
- report_
build_ boolstatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
- type String
- Type of repository that contains the source code to be built. Valid values:
BITBUCKET,CODECOMMIT,CODEPIPELINE,GITHUB,GITHUB_ENTERPRISE,GITLAB,GITLAB_SELF_MANAGED,NO_SOURCE,S3. - build
Status Property MapConfig - Configuration block that contains information that defines how the build project reports the build status to the source provider. This option is only used when the source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
build_status_configblocks are documented below. - buildspec String
- Build specification to use for this build project's related builds. This must be set when
typeisNO_SOURCE. Also, if a non-default buildspec file name or file path aside from the root is used, it must be specified. - git
Clone NumberDepth - Truncate git history to this many commits. Use
0for aFullcheckout which you need to run commands likegit branch --show-current. See AWS CodePipeline User Guide: Tutorial: Use full clone with a GitHub pipeline source for details. - git
Submodules Property MapConfig - Configuration block. Detailed below.
- insecure
Ssl Boolean - Ignore SSL warnings when connecting to source control.
- location String
- Location of the source code from git or s3.
- report
Build BooleanStatus - Whether to report the status of a build's start and finish to your source provider. This option is valid only when your source provider is GitHub, GitHub Enterprise, GitLab, GitLab Self Managed, or Bitbucket.
ProjectSourceBuildStatusConfig, ProjectSourceBuildStatusConfigArgs
- Context string
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- Target
Url string - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- Context string
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- Target
Url string - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- context String
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- target
Url String - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- context string
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- target
Url string - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- context str
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- target_
url str - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- context String
- Specifies the context of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
- target
Url String - Specifies the target url of the build status CodeBuild sends to the source provider. The usage of this parameter depends on the source provider.
ProjectSourceGitSubmodulesConfig, ProjectSourceGitSubmodulesConfigArgs
- Fetch
Submodules bool - Whether to fetch Git submodules for the AWS CodeBuild build project.
- Fetch
Submodules bool - Whether to fetch Git submodules for the AWS CodeBuild build project.
- fetch
Submodules Boolean - Whether to fetch Git submodules for the AWS CodeBuild build project.
- fetch
Submodules boolean - Whether to fetch Git submodules for the AWS CodeBuild build project.
- fetch_
submodules bool - Whether to fetch Git submodules for the AWS CodeBuild build project.
- fetch
Submodules Boolean - Whether to fetch Git submodules for the AWS CodeBuild build project.
ProjectVpcConfig, ProjectVpcConfigArgs
- Security
Group List<string>Ids - Security group IDs to assign to running builds.
- Subnets List<string>
- Subnet IDs within which to run builds.
- Vpc
Id string - ID of the VPC within which to run builds.
- Security
Group []stringIds - Security group IDs to assign to running builds.
- Subnets []string
- Subnet IDs within which to run builds.
- Vpc
Id string - ID of the VPC within which to run builds.
- security
Group List<String>Ids - Security group IDs to assign to running builds.
- subnets List<String>
- Subnet IDs within which to run builds.
- vpc
Id String - ID of the VPC within which to run builds.
- security
Group string[]Ids - Security group IDs to assign to running builds.
- subnets string[]
- Subnet IDs within which to run builds.
- vpc
Id string - ID of the VPC within which to run builds.
- security_
group_ Sequence[str]ids - Security group IDs to assign to running builds.
- subnets Sequence[str]
- Subnet IDs within which to run builds.
- vpc_
id str - ID of the VPC within which to run builds.
- security
Group List<String>Ids - Security group IDs to assign to running builds.
- subnets List<String>
- Subnet IDs within which to run builds.
- vpc
Id String - ID of the VPC within which to run builds.
Import
Using pulumi import, import CodeBuild Project using the name. For example:
$ pulumi import aws:codebuild/project:Project name project-name
To learn more about importing existing cloud resources, see Importing resources.
Package Details
- Repository
- AWS Classic pulumi/pulumi-aws
- License
- Apache-2.0
- Notes
- This Pulumi package is based on the
awsTerraform Provider.