alicloud.nlb.Listener
Explore with Pulumi AI
Provides a NLB Listener resource.
For information about NLB Listener and how to use it, see What is Listener.
NOTE: Available since v1.191.0.
Example Usage
Basic Usage
import * as pulumi from "@pulumi/pulumi";
import * as alicloud from "@pulumi/alicloud";
const config = new pulumi.Config();
const name = config.get("name") || "tf-example";
const default = alicloud.resourcemanager.getResourceGroups({});
const defaultGetZones = alicloud.nlb.getZones({});
const defaultNetwork = new alicloud.vpc.Network("default", {
vpcName: name,
cidrBlock: "10.4.0.0/16",
});
const defaultSwitch = new alicloud.vpc.Switch("default", {
vswitchName: name,
cidrBlock: "10.4.0.0/24",
vpcId: defaultNetwork.id,
zoneId: defaultGetZones.then(defaultGetZones => defaultGetZones.zones?.[0]?.id),
});
const default1 = new alicloud.vpc.Switch("default1", {
vswitchName: name,
cidrBlock: "10.4.1.0/24",
vpcId: defaultNetwork.id,
zoneId: defaultGetZones.then(defaultGetZones => defaultGetZones.zones?.[1]?.id),
});
const defaultSecurityGroup = new alicloud.ecs.SecurityGroup("default", {
name: name,
vpcId: defaultNetwork.id,
});
const defaultLoadBalancer = new alicloud.nlb.LoadBalancer("default", {
loadBalancerName: name,
resourceGroupId: _default.then(_default => _default.ids?.[0]),
loadBalancerType: "Network",
addressType: "Internet",
addressIpVersion: "Ipv4",
vpcId: defaultNetwork.id,
tags: {
Created: "TF",
For: "example",
},
zoneMappings: [
{
vswitchId: defaultSwitch.id,
zoneId: defaultGetZones.then(defaultGetZones => defaultGetZones.zones?.[0]?.id),
},
{
vswitchId: default1.id,
zoneId: defaultGetZones.then(defaultGetZones => defaultGetZones.zones?.[1]?.id),
},
],
});
const defaultServerGroup = new alicloud.nlb.ServerGroup("default", {
resourceGroupId: _default.then(_default => _default.ids?.[0]),
serverGroupName: name,
serverGroupType: "Instance",
vpcId: defaultNetwork.id,
scheduler: "Wrr",
protocol: "TCP",
connectionDrainEnabled: true,
connectionDrainTimeout: 60,
addressIpVersion: "Ipv4",
healthCheck: {
healthCheckEnabled: true,
healthCheckType: "TCP",
healthCheckConnectPort: 0,
healthyThreshold: 2,
unhealthyThreshold: 2,
healthCheckConnectTimeout: 5,
healthCheckInterval: 10,
httpCheckMethod: "GET",
healthCheckHttpCodes: [
"http_2xx",
"http_3xx",
"http_4xx",
],
},
tags: {
Created: "TF",
For: "example",
},
});
const defaultListener = new alicloud.nlb.Listener("default", {
listenerProtocol: "TCP",
listenerPort: 80,
listenerDescription: name,
loadBalancerId: defaultLoadBalancer.id,
serverGroupId: defaultServerGroup.id,
idleTimeout: 900,
proxyProtocolEnabled: true,
cps: 10000,
mss: 0,
});
import pulumi
import pulumi_alicloud as alicloud
config = pulumi.Config()
name = config.get("name")
if name is None:
name = "tf-example"
default = alicloud.resourcemanager.get_resource_groups()
default_get_zones = alicloud.nlb.get_zones()
default_network = alicloud.vpc.Network("default",
vpc_name=name,
cidr_block="10.4.0.0/16")
default_switch = alicloud.vpc.Switch("default",
vswitch_name=name,
cidr_block="10.4.0.0/24",
vpc_id=default_network.id,
zone_id=default_get_zones.zones[0].id)
default1 = alicloud.vpc.Switch("default1",
vswitch_name=name,
cidr_block="10.4.1.0/24",
vpc_id=default_network.id,
zone_id=default_get_zones.zones[1].id)
default_security_group = alicloud.ecs.SecurityGroup("default",
name=name,
vpc_id=default_network.id)
default_load_balancer = alicloud.nlb.LoadBalancer("default",
load_balancer_name=name,
resource_group_id=default.ids[0],
load_balancer_type="Network",
address_type="Internet",
address_ip_version="Ipv4",
vpc_id=default_network.id,
tags={
"Created": "TF",
"For": "example",
},
zone_mappings=[
{
"vswitch_id": default_switch.id,
"zone_id": default_get_zones.zones[0].id,
},
{
"vswitch_id": default1.id,
"zone_id": default_get_zones.zones[1].id,
},
])
default_server_group = alicloud.nlb.ServerGroup("default",
resource_group_id=default.ids[0],
server_group_name=name,
server_group_type="Instance",
vpc_id=default_network.id,
scheduler="Wrr",
protocol="TCP",
connection_drain_enabled=True,
connection_drain_timeout=60,
address_ip_version="Ipv4",
health_check={
"health_check_enabled": True,
"health_check_type": "TCP",
"health_check_connect_port": 0,
"healthy_threshold": 2,
"unhealthy_threshold": 2,
"health_check_connect_timeout": 5,
"health_check_interval": 10,
"http_check_method": "GET",
"health_check_http_codes": [
"http_2xx",
"http_3xx",
"http_4xx",
],
},
tags={
"Created": "TF",
"For": "example",
})
default_listener = alicloud.nlb.Listener("default",
listener_protocol="TCP",
listener_port=80,
listener_description=name,
load_balancer_id=default_load_balancer.id,
server_group_id=default_server_group.id,
idle_timeout=900,
proxy_protocol_enabled=True,
cps=10000,
mss=0)
package main
import (
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/ecs"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/nlb"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/resourcemanager"
"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpc"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"
)
func main() {
pulumi.Run(func(ctx *pulumi.Context) error {
cfg := config.New(ctx, "")
name := "tf-example"
if param := cfg.Get("name"); param != "" {
name = param
}
_default, err := resourcemanager.GetResourceGroups(ctx, &resourcemanager.GetResourceGroupsArgs{}, nil)
if err != nil {
return err
}
defaultGetZones, err := nlb.GetZones(ctx, &nlb.GetZonesArgs{}, nil)
if err != nil {
return err
}
defaultNetwork, err := vpc.NewNetwork(ctx, "default", &vpc.NetworkArgs{
VpcName: pulumi.String(name),
CidrBlock: pulumi.String("10.4.0.0/16"),
})
if err != nil {
return err
}
defaultSwitch, err := vpc.NewSwitch(ctx, "default", &vpc.SwitchArgs{
VswitchName: pulumi.String(name),
CidrBlock: pulumi.String("10.4.0.0/24"),
VpcId: defaultNetwork.ID(),
ZoneId: pulumi.String(defaultGetZones.Zones[0].Id),
})
if err != nil {
return err
}
default1, err := vpc.NewSwitch(ctx, "default1", &vpc.SwitchArgs{
VswitchName: pulumi.String(name),
CidrBlock: pulumi.String("10.4.1.0/24"),
VpcId: defaultNetwork.ID(),
ZoneId: pulumi.String(defaultGetZones.Zones[1].Id),
})
if err != nil {
return err
}
_, err = ecs.NewSecurityGroup(ctx, "default", &ecs.SecurityGroupArgs{
Name: pulumi.String(name),
VpcId: defaultNetwork.ID(),
})
if err != nil {
return err
}
defaultLoadBalancer, err := nlb.NewLoadBalancer(ctx, "default", &nlb.LoadBalancerArgs{
LoadBalancerName: pulumi.String(name),
ResourceGroupId: pulumi.String(_default.Ids[0]),
LoadBalancerType: pulumi.String("Network"),
AddressType: pulumi.String("Internet"),
AddressIpVersion: pulumi.String("Ipv4"),
VpcId: defaultNetwork.ID(),
Tags: pulumi.StringMap{
"Created": pulumi.String("TF"),
"For": pulumi.String("example"),
},
ZoneMappings: nlb.LoadBalancerZoneMappingArray{
&nlb.LoadBalancerZoneMappingArgs{
VswitchId: defaultSwitch.ID(),
ZoneId: pulumi.String(defaultGetZones.Zones[0].Id),
},
&nlb.LoadBalancerZoneMappingArgs{
VswitchId: default1.ID(),
ZoneId: pulumi.String(defaultGetZones.Zones[1].Id),
},
},
})
if err != nil {
return err
}
defaultServerGroup, err := nlb.NewServerGroup(ctx, "default", &nlb.ServerGroupArgs{
ResourceGroupId: pulumi.String(_default.Ids[0]),
ServerGroupName: pulumi.String(name),
ServerGroupType: pulumi.String("Instance"),
VpcId: defaultNetwork.ID(),
Scheduler: pulumi.String("Wrr"),
Protocol: pulumi.String("TCP"),
ConnectionDrainEnabled: pulumi.Bool(true),
ConnectionDrainTimeout: pulumi.Int(60),
AddressIpVersion: pulumi.String("Ipv4"),
HealthCheck: &nlb.ServerGroupHealthCheckArgs{
HealthCheckEnabled: pulumi.Bool(true),
HealthCheckType: pulumi.String("TCP"),
HealthCheckConnectPort: pulumi.Int(0),
HealthyThreshold: pulumi.Int(2),
UnhealthyThreshold: pulumi.Int(2),
HealthCheckConnectTimeout: pulumi.Int(5),
HealthCheckInterval: pulumi.Int(10),
HttpCheckMethod: pulumi.String("GET"),
HealthCheckHttpCodes: pulumi.StringArray{
pulumi.String("http_2xx"),
pulumi.String("http_3xx"),
pulumi.String("http_4xx"),
},
},
Tags: pulumi.StringMap{
"Created": pulumi.String("TF"),
"For": pulumi.String("example"),
},
})
if err != nil {
return err
}
_, err = nlb.NewListener(ctx, "default", &nlb.ListenerArgs{
ListenerProtocol: pulumi.String("TCP"),
ListenerPort: pulumi.Int(80),
ListenerDescription: pulumi.String(name),
LoadBalancerId: defaultLoadBalancer.ID(),
ServerGroupId: defaultServerGroup.ID(),
IdleTimeout: pulumi.Int(900),
ProxyProtocolEnabled: pulumi.Bool(true),
Cps: pulumi.Int(10000),
Mss: pulumi.Int(0),
})
if err != nil {
return err
}
return nil
})
}
using System.Collections.Generic;
using System.Linq;
using Pulumi;
using AliCloud = Pulumi.AliCloud;
return await Deployment.RunAsync(() =>
{
var config = new Config();
var name = config.Get("name") ?? "tf-example";
var @default = AliCloud.ResourceManager.GetResourceGroups.Invoke();
var defaultGetZones = AliCloud.Nlb.GetZones.Invoke();
var defaultNetwork = new AliCloud.Vpc.Network("default", new()
{
VpcName = name,
CidrBlock = "10.4.0.0/16",
});
var defaultSwitch = new AliCloud.Vpc.Switch("default", new()
{
VswitchName = name,
CidrBlock = "10.4.0.0/24",
VpcId = defaultNetwork.Id,
ZoneId = defaultGetZones.Apply(getZonesResult => getZonesResult.Zones[0]?.Id),
});
var default1 = new AliCloud.Vpc.Switch("default1", new()
{
VswitchName = name,
CidrBlock = "10.4.1.0/24",
VpcId = defaultNetwork.Id,
ZoneId = defaultGetZones.Apply(getZonesResult => getZonesResult.Zones[1]?.Id),
});
var defaultSecurityGroup = new AliCloud.Ecs.SecurityGroup("default", new()
{
Name = name,
VpcId = defaultNetwork.Id,
});
var defaultLoadBalancer = new AliCloud.Nlb.LoadBalancer("default", new()
{
LoadBalancerName = name,
ResourceGroupId = @default.Apply(@default => @default.Apply(getResourceGroupsResult => getResourceGroupsResult.Ids[0])),
LoadBalancerType = "Network",
AddressType = "Internet",
AddressIpVersion = "Ipv4",
VpcId = defaultNetwork.Id,
Tags =
{
{ "Created", "TF" },
{ "For", "example" },
},
ZoneMappings = new[]
{
new AliCloud.Nlb.Inputs.LoadBalancerZoneMappingArgs
{
VswitchId = defaultSwitch.Id,
ZoneId = defaultGetZones.Apply(getZonesResult => getZonesResult.Zones[0]?.Id),
},
new AliCloud.Nlb.Inputs.LoadBalancerZoneMappingArgs
{
VswitchId = default1.Id,
ZoneId = defaultGetZones.Apply(getZonesResult => getZonesResult.Zones[1]?.Id),
},
},
});
var defaultServerGroup = new AliCloud.Nlb.ServerGroup("default", new()
{
ResourceGroupId = @default.Apply(@default => @default.Apply(getResourceGroupsResult => getResourceGroupsResult.Ids[0])),
ServerGroupName = name,
ServerGroupType = "Instance",
VpcId = defaultNetwork.Id,
Scheduler = "Wrr",
Protocol = "TCP",
ConnectionDrainEnabled = true,
ConnectionDrainTimeout = 60,
AddressIpVersion = "Ipv4",
HealthCheck = new AliCloud.Nlb.Inputs.ServerGroupHealthCheckArgs
{
HealthCheckEnabled = true,
HealthCheckType = "TCP",
HealthCheckConnectPort = 0,
HealthyThreshold = 2,
UnhealthyThreshold = 2,
HealthCheckConnectTimeout = 5,
HealthCheckInterval = 10,
HttpCheckMethod = "GET",
HealthCheckHttpCodes = new[]
{
"http_2xx",
"http_3xx",
"http_4xx",
},
},
Tags =
{
{ "Created", "TF" },
{ "For", "example" },
},
});
var defaultListener = new AliCloud.Nlb.Listener("default", new()
{
ListenerProtocol = "TCP",
ListenerPort = 80,
ListenerDescription = name,
LoadBalancerId = defaultLoadBalancer.Id,
ServerGroupId = defaultServerGroup.Id,
IdleTimeout = 900,
ProxyProtocolEnabled = true,
Cps = 10000,
Mss = 0,
});
});
package generated_program;
import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.alicloud.resourcemanager.ResourcemanagerFunctions;
import com.pulumi.alicloud.resourcemanager.inputs.GetResourceGroupsArgs;
import com.pulumi.alicloud.nlb.NlbFunctions;
import com.pulumi.alicloud.nlb.inputs.GetZonesArgs;
import com.pulumi.alicloud.vpc.Network;
import com.pulumi.alicloud.vpc.NetworkArgs;
import com.pulumi.alicloud.vpc.Switch;
import com.pulumi.alicloud.vpc.SwitchArgs;
import com.pulumi.alicloud.ecs.SecurityGroup;
import com.pulumi.alicloud.ecs.SecurityGroupArgs;
import com.pulumi.alicloud.nlb.LoadBalancer;
import com.pulumi.alicloud.nlb.LoadBalancerArgs;
import com.pulumi.alicloud.nlb.inputs.LoadBalancerZoneMappingArgs;
import com.pulumi.alicloud.nlb.ServerGroup;
import com.pulumi.alicloud.nlb.ServerGroupArgs;
import com.pulumi.alicloud.nlb.inputs.ServerGroupHealthCheckArgs;
import com.pulumi.alicloud.nlb.Listener;
import com.pulumi.alicloud.nlb.ListenerArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;
public class App {
public static void main(String[] args) {
Pulumi.run(App::stack);
}
public static void stack(Context ctx) {
final var config = ctx.config();
final var name = config.get("name").orElse("tf-example");
final var default = ResourcemanagerFunctions.getResourceGroups();
final var defaultGetZones = NlbFunctions.getZones();
var defaultNetwork = new Network("defaultNetwork", NetworkArgs.builder()
.vpcName(name)
.cidrBlock("10.4.0.0/16")
.build());
var defaultSwitch = new Switch("defaultSwitch", SwitchArgs.builder()
.vswitchName(name)
.cidrBlock("10.4.0.0/24")
.vpcId(defaultNetwork.id())
.zoneId(defaultGetZones.applyValue(getZonesResult -> getZonesResult.zones()[0].id()))
.build());
var default1 = new Switch("default1", SwitchArgs.builder()
.vswitchName(name)
.cidrBlock("10.4.1.0/24")
.vpcId(defaultNetwork.id())
.zoneId(defaultGetZones.applyValue(getZonesResult -> getZonesResult.zones()[1].id()))
.build());
var defaultSecurityGroup = new SecurityGroup("defaultSecurityGroup", SecurityGroupArgs.builder()
.name(name)
.vpcId(defaultNetwork.id())
.build());
var defaultLoadBalancer = new LoadBalancer("defaultLoadBalancer", LoadBalancerArgs.builder()
.loadBalancerName(name)
.resourceGroupId(default_.ids()[0])
.loadBalancerType("Network")
.addressType("Internet")
.addressIpVersion("Ipv4")
.vpcId(defaultNetwork.id())
.tags(Map.ofEntries(
Map.entry("Created", "TF"),
Map.entry("For", "example")
))
.zoneMappings(
LoadBalancerZoneMappingArgs.builder()
.vswitchId(defaultSwitch.id())
.zoneId(defaultGetZones.applyValue(getZonesResult -> getZonesResult.zones()[0].id()))
.build(),
LoadBalancerZoneMappingArgs.builder()
.vswitchId(default1.id())
.zoneId(defaultGetZones.applyValue(getZonesResult -> getZonesResult.zones()[1].id()))
.build())
.build());
var defaultServerGroup = new ServerGroup("defaultServerGroup", ServerGroupArgs.builder()
.resourceGroupId(default_.ids()[0])
.serverGroupName(name)
.serverGroupType("Instance")
.vpcId(defaultNetwork.id())
.scheduler("Wrr")
.protocol("TCP")
.connectionDrainEnabled(true)
.connectionDrainTimeout(60)
.addressIpVersion("Ipv4")
.healthCheck(ServerGroupHealthCheckArgs.builder()
.healthCheckEnabled(true)
.healthCheckType("TCP")
.healthCheckConnectPort(0)
.healthyThreshold(2)
.unhealthyThreshold(2)
.healthCheckConnectTimeout(5)
.healthCheckInterval(10)
.httpCheckMethod("GET")
.healthCheckHttpCodes(
"http_2xx",
"http_3xx",
"http_4xx")
.build())
.tags(Map.ofEntries(
Map.entry("Created", "TF"),
Map.entry("For", "example")
))
.build());
var defaultListener = new Listener("defaultListener", ListenerArgs.builder()
.listenerProtocol("TCP")
.listenerPort("80")
.listenerDescription(name)
.loadBalancerId(defaultLoadBalancer.id())
.serverGroupId(defaultServerGroup.id())
.idleTimeout("900")
.proxyProtocolEnabled("true")
.cps("10000")
.mss("0")
.build());
}
}
configuration:
name:
type: string
default: tf-example
resources:
defaultNetwork:
type: alicloud:vpc:Network
name: default
properties:
vpcName: ${name}
cidrBlock: 10.4.0.0/16
defaultSwitch:
type: alicloud:vpc:Switch
name: default
properties:
vswitchName: ${name}
cidrBlock: 10.4.0.0/24
vpcId: ${defaultNetwork.id}
zoneId: ${defaultGetZones.zones[0].id}
default1:
type: alicloud:vpc:Switch
properties:
vswitchName: ${name}
cidrBlock: 10.4.1.0/24
vpcId: ${defaultNetwork.id}
zoneId: ${defaultGetZones.zones[1].id}
defaultSecurityGroup:
type: alicloud:ecs:SecurityGroup
name: default
properties:
name: ${name}
vpcId: ${defaultNetwork.id}
defaultLoadBalancer:
type: alicloud:nlb:LoadBalancer
name: default
properties:
loadBalancerName: ${name}
resourceGroupId: ${default.ids[0]}
loadBalancerType: Network
addressType: Internet
addressIpVersion: Ipv4
vpcId: ${defaultNetwork.id}
tags:
Created: TF
For: example
zoneMappings:
- vswitchId: ${defaultSwitch.id}
zoneId: ${defaultGetZones.zones[0].id}
- vswitchId: ${default1.id}
zoneId: ${defaultGetZones.zones[1].id}
defaultServerGroup:
type: alicloud:nlb:ServerGroup
name: default
properties:
resourceGroupId: ${default.ids[0]}
serverGroupName: ${name}
serverGroupType: Instance
vpcId: ${defaultNetwork.id}
scheduler: Wrr
protocol: TCP
connectionDrainEnabled: true
connectionDrainTimeout: 60
addressIpVersion: Ipv4
healthCheck:
healthCheckEnabled: true
healthCheckType: TCP
healthCheckConnectPort: 0
healthyThreshold: 2
unhealthyThreshold: 2
healthCheckConnectTimeout: 5
healthCheckInterval: 10
httpCheckMethod: GET
healthCheckHttpCodes:
- http_2xx
- http_3xx
- http_4xx
tags:
Created: TF
For: example
defaultListener:
type: alicloud:nlb:Listener
name: default
properties:
listenerProtocol: TCP
listenerPort: '80'
listenerDescription: ${name}
loadBalancerId: ${defaultLoadBalancer.id}
serverGroupId: ${defaultServerGroup.id}
idleTimeout: '900'
proxyProtocolEnabled: 'true'
cps: '10000'
mss: '0'
variables:
default:
fn::invoke:
Function: alicloud:resourcemanager:getResourceGroups
Arguments: {}
defaultGetZones:
fn::invoke:
Function: alicloud:nlb:getZones
Arguments: {}
Create Listener Resource
Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.
Constructor syntax
new Listener(name: string, args: ListenerArgs, opts?: CustomResourceOptions);
@overload
def Listener(resource_name: str,
args: ListenerArgs,
opts: Optional[ResourceOptions] = None)
@overload
def Listener(resource_name: str,
opts: Optional[ResourceOptions] = None,
listener_port: Optional[int] = None,
server_group_id: Optional[str] = None,
load_balancer_id: Optional[str] = None,
listener_protocol: Optional[str] = None,
cps: Optional[int] = None,
ca_certificate_ids: Optional[Sequence[str]] = None,
end_port: Optional[int] = None,
idle_timeout: Optional[int] = None,
listener_description: Optional[str] = None,
certificate_ids: Optional[Sequence[str]] = None,
ca_enabled: Optional[bool] = None,
alpn_enabled: Optional[bool] = None,
mss: Optional[int] = None,
proxy_protocol_enabled: Optional[bool] = None,
sec_sensor_enabled: Optional[bool] = None,
security_policy_id: Optional[str] = None,
alpn_policy: Optional[str] = None,
start_port: Optional[int] = None,
status: Optional[str] = None,
tags: Optional[Mapping[str, str]] = None)
func NewListener(ctx *Context, name string, args ListenerArgs, opts ...ResourceOption) (*Listener, error)
public Listener(string name, ListenerArgs args, CustomResourceOptions? opts = null)
public Listener(String name, ListenerArgs args)
public Listener(String name, ListenerArgs args, CustomResourceOptions options)
type: alicloud:nlb:Listener
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.
Parameters
- name string
- The unique name of the resource.
- args ListenerArgs
- The arguments to resource properties.
- opts CustomResourceOptions
- Bag of options to control resource's behavior.
- resource_name str
- The unique name of the resource.
- args ListenerArgs
- The arguments to resource properties.
- opts ResourceOptions
- Bag of options to control resource's behavior.
- ctx Context
- Context object for the current deployment.
- name string
- The unique name of the resource.
- args ListenerArgs
- The arguments to resource properties.
- opts ResourceOption
- Bag of options to control resource's behavior.
- name string
- The unique name of the resource.
- args ListenerArgs
- The arguments to resource properties.
- opts CustomResourceOptions
- Bag of options to control resource's behavior.
- name String
- The unique name of the resource.
- args ListenerArgs
- The arguments to resource properties.
- options CustomResourceOptions
- Bag of options to control resource's behavior.
Constructor example
The following reference example uses placeholder values for all input properties.
var examplelistenerResourceResourceFromNlblistener = new AliCloud.Nlb.Listener("examplelistenerResourceResourceFromNlblistener", new()
{
ListenerPort = 0,
ServerGroupId = "string",
LoadBalancerId = "string",
ListenerProtocol = "string",
Cps = 0,
CaCertificateIds = new[]
{
"string",
},
EndPort = 0,
IdleTimeout = 0,
ListenerDescription = "string",
CertificateIds = new[]
{
"string",
},
CaEnabled = false,
AlpnEnabled = false,
Mss = 0,
ProxyProtocolEnabled = false,
SecSensorEnabled = false,
SecurityPolicyId = "string",
AlpnPolicy = "string",
StartPort = 0,
Status = "string",
Tags =
{
{ "string", "string" },
},
});
example, err := nlb.NewListener(ctx, "examplelistenerResourceResourceFromNlblistener", &nlb.ListenerArgs{
ListenerPort: pulumi.Int(0),
ServerGroupId: pulumi.String("string"),
LoadBalancerId: pulumi.String("string"),
ListenerProtocol: pulumi.String("string"),
Cps: pulumi.Int(0),
CaCertificateIds: pulumi.StringArray{
pulumi.String("string"),
},
EndPort: pulumi.Int(0),
IdleTimeout: pulumi.Int(0),
ListenerDescription: pulumi.String("string"),
CertificateIds: pulumi.StringArray{
pulumi.String("string"),
},
CaEnabled: pulumi.Bool(false),
AlpnEnabled: pulumi.Bool(false),
Mss: pulumi.Int(0),
ProxyProtocolEnabled: pulumi.Bool(false),
SecSensorEnabled: pulumi.Bool(false),
SecurityPolicyId: pulumi.String("string"),
AlpnPolicy: pulumi.String("string"),
StartPort: pulumi.Int(0),
Status: pulumi.String("string"),
Tags: pulumi.StringMap{
"string": pulumi.String("string"),
},
})
var examplelistenerResourceResourceFromNlblistener = new Listener("examplelistenerResourceResourceFromNlblistener", ListenerArgs.builder()
.listenerPort(0)
.serverGroupId("string")
.loadBalancerId("string")
.listenerProtocol("string")
.cps(0)
.caCertificateIds("string")
.endPort(0)
.idleTimeout(0)
.listenerDescription("string")
.certificateIds("string")
.caEnabled(false)
.alpnEnabled(false)
.mss(0)
.proxyProtocolEnabled(false)
.secSensorEnabled(false)
.securityPolicyId("string")
.alpnPolicy("string")
.startPort(0)
.status("string")
.tags(Map.of("string", "string"))
.build());
examplelistener_resource_resource_from_nlblistener = alicloud.nlb.Listener("examplelistenerResourceResourceFromNlblistener",
listener_port=0,
server_group_id="string",
load_balancer_id="string",
listener_protocol="string",
cps=0,
ca_certificate_ids=["string"],
end_port=0,
idle_timeout=0,
listener_description="string",
certificate_ids=["string"],
ca_enabled=False,
alpn_enabled=False,
mss=0,
proxy_protocol_enabled=False,
sec_sensor_enabled=False,
security_policy_id="string",
alpn_policy="string",
start_port=0,
status="string",
tags={
"string": "string",
})
const examplelistenerResourceResourceFromNlblistener = new alicloud.nlb.Listener("examplelistenerResourceResourceFromNlblistener", {
listenerPort: 0,
serverGroupId: "string",
loadBalancerId: "string",
listenerProtocol: "string",
cps: 0,
caCertificateIds: ["string"],
endPort: 0,
idleTimeout: 0,
listenerDescription: "string",
certificateIds: ["string"],
caEnabled: false,
alpnEnabled: false,
mss: 0,
proxyProtocolEnabled: false,
secSensorEnabled: false,
securityPolicyId: "string",
alpnPolicy: "string",
startPort: 0,
status: "string",
tags: {
string: "string",
},
});
type: alicloud:nlb:Listener
properties:
alpnEnabled: false
alpnPolicy: string
caCertificateIds:
- string
caEnabled: false
certificateIds:
- string
cps: 0
endPort: 0
idleTimeout: 0
listenerDescription: string
listenerPort: 0
listenerProtocol: string
loadBalancerId: string
mss: 0
proxyProtocolEnabled: false
secSensorEnabled: false
securityPolicyId: string
serverGroupId: string
startPort: 0
status: string
tags:
string: string
Listener Resource Properties
To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.
Inputs
In Python, inputs that are objects can be passed either as argument classes or as dictionary literals.
The Listener resource accepts the following input properties:
- Listener
Port int The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- Listener
Protocol string - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - Load
Balancer stringId - The ID of the Network Load Balancer (NLB) instance.
- Server
Group stringId - The ID of the server group.
- Alpn
Enabled bool - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- Alpn
Policy string The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- Ca
Certificate List<string>Ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- Ca
Enabled bool - Specifies whether to enable mutual authentication. Valid values:
- Certificate
Ids List<string> The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- Cps int
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - End
Port int The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- Idle
Timeout int - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - Listener
Description string Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- Mss int
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- Proxy
Protocol boolEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- Sec
Sensor boolEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- Security
Policy stringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- Start
Port int The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- Status string
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - Dictionary<string, string>
- The tag of the resource
- Listener
Port int The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- Listener
Protocol string - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - Load
Balancer stringId - The ID of the Network Load Balancer (NLB) instance.
- Server
Group stringId - The ID of the server group.
- Alpn
Enabled bool - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- Alpn
Policy string The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- Ca
Certificate []stringIds The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- Ca
Enabled bool - Specifies whether to enable mutual authentication. Valid values:
- Certificate
Ids []string The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- Cps int
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - End
Port int The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- Idle
Timeout int - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - Listener
Description string Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- Mss int
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- Proxy
Protocol boolEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- Sec
Sensor boolEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- Security
Policy stringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- Start
Port int The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- Status string
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - map[string]string
- The tag of the resource
- listener
Port Integer The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- listener
Protocol String - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - load
Balancer StringId - The ID of the Network Load Balancer (NLB) instance.
- server
Group StringId - The ID of the server group.
- alpn
Enabled Boolean - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- alpn
Policy String The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- ca
Certificate List<String>Ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- ca
Enabled Boolean - Specifies whether to enable mutual authentication. Valid values:
- certificate
Ids List<String> The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- cps Integer
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - end
Port Integer The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- idle
Timeout Integer - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - listener
Description String Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- mss Integer
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- proxy
Protocol BooleanEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- sec
Sensor BooleanEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- security
Policy StringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- start
Port Integer The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- status String
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - Map<String,String>
- The tag of the resource
- listener
Port number The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- listener
Protocol string - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - load
Balancer stringId - The ID of the Network Load Balancer (NLB) instance.
- server
Group stringId - The ID of the server group.
- alpn
Enabled boolean - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- alpn
Policy string The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- ca
Certificate string[]Ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- ca
Enabled boolean - Specifies whether to enable mutual authentication. Valid values:
- certificate
Ids string[] The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- cps number
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - end
Port number The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- idle
Timeout number - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - listener
Description string Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- mss number
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- proxy
Protocol booleanEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- sec
Sensor booleanEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- security
Policy stringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- start
Port number The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- status string
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - {[key: string]: string}
- The tag of the resource
- listener_
port int The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- listener_
protocol str - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - load_
balancer_ strid - The ID of the Network Load Balancer (NLB) instance.
- server_
group_ strid - The ID of the server group.
- alpn_
enabled bool - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- alpn_
policy str The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- ca_
certificate_ Sequence[str]ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- ca_
enabled bool - Specifies whether to enable mutual authentication. Valid values:
- certificate_
ids Sequence[str] The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- cps int
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - end_
port int The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- idle_
timeout int - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - listener_
description str Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- mss int
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- proxy_
protocol_ boolenabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- sec_
sensor_ boolenabled - Specifies whether to enable fine-grained monitoring. Valid values:
- security_
policy_ strid The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- start_
port int The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- status str
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - Mapping[str, str]
- The tag of the resource
- listener
Port Number The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- listener
Protocol String - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - load
Balancer StringId - The ID of the Network Load Balancer (NLB) instance.
- server
Group StringId - The ID of the server group.
- alpn
Enabled Boolean - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- alpn
Policy String The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- ca
Certificate List<String>Ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- ca
Enabled Boolean - Specifies whether to enable mutual authentication. Valid values:
- certificate
Ids List<String> The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- cps Number
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - end
Port Number The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- idle
Timeout Number - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - listener
Description String Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- mss Number
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- proxy
Protocol BooleanEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- sec
Sensor BooleanEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- security
Policy StringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- start
Port Number The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- status String
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - Map<String>
- The tag of the resource
Outputs
All input properties are implicitly available as output properties. Additionally, the Listener resource produces the following output properties:
- Id string
- The provider-assigned unique ID for this managed resource.
- Id string
- The provider-assigned unique ID for this managed resource.
- id String
- The provider-assigned unique ID for this managed resource.
- id string
- The provider-assigned unique ID for this managed resource.
- id str
- The provider-assigned unique ID for this managed resource.
- id String
- The provider-assigned unique ID for this managed resource.
Look up Existing Listener Resource
Get an existing Listener resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.
public static get(name: string, id: Input<ID>, state?: ListenerState, opts?: CustomResourceOptions): Listener
@staticmethod
def get(resource_name: str,
id: str,
opts: Optional[ResourceOptions] = None,
alpn_enabled: Optional[bool] = None,
alpn_policy: Optional[str] = None,
ca_certificate_ids: Optional[Sequence[str]] = None,
ca_enabled: Optional[bool] = None,
certificate_ids: Optional[Sequence[str]] = None,
cps: Optional[int] = None,
end_port: Optional[int] = None,
idle_timeout: Optional[int] = None,
listener_description: Optional[str] = None,
listener_port: Optional[int] = None,
listener_protocol: Optional[str] = None,
load_balancer_id: Optional[str] = None,
mss: Optional[int] = None,
proxy_protocol_enabled: Optional[bool] = None,
sec_sensor_enabled: Optional[bool] = None,
security_policy_id: Optional[str] = None,
server_group_id: Optional[str] = None,
start_port: Optional[int] = None,
status: Optional[str] = None,
tags: Optional[Mapping[str, str]] = None) -> Listener
func GetListener(ctx *Context, name string, id IDInput, state *ListenerState, opts ...ResourceOption) (*Listener, error)
public static Listener Get(string name, Input<string> id, ListenerState? state, CustomResourceOptions? opts = null)
public static Listener get(String name, Output<String> id, ListenerState state, CustomResourceOptions options)
Resource lookup is not supported in YAML
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- resource_name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- name
- The unique name of the resulting resource.
- id
- The unique provider ID of the resource to lookup.
- state
- Any extra arguments used during the lookup.
- opts
- A bag of options that control this resource's behavior.
- Alpn
Enabled bool - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- Alpn
Policy string The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- Ca
Certificate List<string>Ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- Ca
Enabled bool - Specifies whether to enable mutual authentication. Valid values:
- Certificate
Ids List<string> The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- Cps int
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - End
Port int The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- Idle
Timeout int - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - Listener
Description string Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- Listener
Port int The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- Listener
Protocol string - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - Load
Balancer stringId - The ID of the Network Load Balancer (NLB) instance.
- Mss int
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- Proxy
Protocol boolEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- Sec
Sensor boolEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- Security
Policy stringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- Server
Group stringId - The ID of the server group.
- Start
Port int The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- Status string
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - Dictionary<string, string>
- The tag of the resource
- Alpn
Enabled bool - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- Alpn
Policy string The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- Ca
Certificate []stringIds The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- Ca
Enabled bool - Specifies whether to enable mutual authentication. Valid values:
- Certificate
Ids []string The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- Cps int
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - End
Port int The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- Idle
Timeout int - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - Listener
Description string Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- Listener
Port int The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- Listener
Protocol string - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - Load
Balancer stringId - The ID of the Network Load Balancer (NLB) instance.
- Mss int
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- Proxy
Protocol boolEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- Sec
Sensor boolEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- Security
Policy stringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- Server
Group stringId - The ID of the server group.
- Start
Port int The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- Status string
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - map[string]string
- The tag of the resource
- alpn
Enabled Boolean - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- alpn
Policy String The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- ca
Certificate List<String>Ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- ca
Enabled Boolean - Specifies whether to enable mutual authentication. Valid values:
- certificate
Ids List<String> The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- cps Integer
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - end
Port Integer The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- idle
Timeout Integer - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - listener
Description String Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- listener
Port Integer The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- listener
Protocol String - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - load
Balancer StringId - The ID of the Network Load Balancer (NLB) instance.
- mss Integer
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- proxy
Protocol BooleanEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- sec
Sensor BooleanEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- security
Policy StringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- server
Group StringId - The ID of the server group.
- start
Port Integer The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- status String
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - Map<String,String>
- The tag of the resource
- alpn
Enabled boolean - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- alpn
Policy string The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- ca
Certificate string[]Ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- ca
Enabled boolean - Specifies whether to enable mutual authentication. Valid values:
- certificate
Ids string[] The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- cps number
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - end
Port number The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- idle
Timeout number - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - listener
Description string Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- listener
Port number The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- listener
Protocol string - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - load
Balancer stringId - The ID of the Network Load Balancer (NLB) instance.
- mss number
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- proxy
Protocol booleanEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- sec
Sensor booleanEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- security
Policy stringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- server
Group stringId - The ID of the server group.
- start
Port number The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- status string
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - {[key: string]: string}
- The tag of the resource
- alpn_
enabled bool - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- alpn_
policy str The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- ca_
certificate_ Sequence[str]ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- ca_
enabled bool - Specifies whether to enable mutual authentication. Valid values:
- certificate_
ids Sequence[str] The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- cps int
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - end_
port int The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- idle_
timeout int - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - listener_
description str Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- listener_
port int The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- listener_
protocol str - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - load_
balancer_ strid - The ID of the Network Load Balancer (NLB) instance.
- mss int
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- proxy_
protocol_ boolenabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- sec_
sensor_ boolenabled - Specifies whether to enable fine-grained monitoring. Valid values:
- security_
policy_ strid The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- server_
group_ strid - The ID of the server group.
- start_
port int The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- status str
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - Mapping[str, str]
- The tag of the resource
- alpn
Enabled Boolean - Specifies whether to enable Application-Layer Protocol Negotiation (ALPN). Valid values:
- alpn
Policy String The ALPN policy. Valid values:
HTTP1Only
: uses only HTTP 1.x. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0.HTTP2Only
: uses only HTTP 2.0.HTTP2Optional
: preferentially uses HTTP 1.x over HTTP 2.0. The priority of HTTP 1.1 is higher than the priority of HTTP 1.0, and the priority of HTTP 1.0 is higher than the priority of HTTP 2.0.HTTP2Preferred
: preferentially uses HTTP 2.0 over HTTP 1.x. The priority of HTTP 2.0 is higher than the priority of HTTP 1.1, and the priority of HTTP 1.1 is higher than the priority of HTTP 1.0.
NOTE: This parameter is required if AlpnEnabled is set to true.
NOTE: Effective only for TCPSSL listener.
- ca
Certificate List<String>Ids The list of certificate authority (CA) certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: Only one CA certificate is supported.
- ca
Enabled Boolean - Specifies whether to enable mutual authentication. Valid values:
- certificate
Ids List<String> The list of server certificates. This parameter takes effect only for listeners that use SSL over TCP.
NOTE: This parameter takes effect only for TCPSSL listeners.
- cps Number
- The maximum number of connections that can be created per second on the NLB instance. Valid values:
0
to1000000
.0
specifies that the number of connections is unlimited. - end
Port Number The last port in the listener port range. Valid values:
0
to65535
. The number of the last port must be greater than the number of the first port.NOTE: This parameter is required when
ListenerPort
is set to0
.- idle
Timeout Number - The timeout period of idle connections. Unit: seconds. Valid values:
1
to900
. Default value:900
. - listener
Description String Enter a name for the listener.
The description must be 2 to 256 characters in length, and can contain letters, digits, commas (,), periods (.), semicolons (;), forward slashes (/), at signs (@), underscores (_), and hyphens (-).
- listener
Port Number The listener port. Valid values:
0
to65535
.If you set the value to
0
, the listener listens by port range. If you set the value to0
, you must specifyStartPort
andEndPort
.- listener
Protocol String - The listening protocol. Valid values:
TCP
,UDP
, andTCPSSL
. - load
Balancer StringId - The ID of the Network Load Balancer (NLB) instance.
- mss Number
The maximum size of a TCP segment. Unit: bytes. Valid values:
0
to1500
.0
specifies that the maximum segment size remains unchanged.NOTE: This parameter is supported only by TCP listeners and listeners that use SSL over TCP.
- proxy
Protocol BooleanEnabled - Specifies whether to use the Proxy protocol to pass client IP addresses to backend servers. Valid values:
- sec
Sensor BooleanEnabled - Specifies whether to enable fine-grained monitoring. Valid values:
- security
Policy StringId The security policy ID. System security policies and custom security policies are supported.
Valid values:
tls_cipher_policy\_1\_0
(default),tls_cipher_policy\_1\_1
,tls_cipher_policy\_1\_2
,tls_cipher_policy\_1\_2\_strict
, andtls_cipher_policy\_1\_2\_strict_with\_1\_3
.NOTE: This parameter takes effect only for listeners that use SSL over TCP.
- server
Group StringId - The ID of the server group.
- start
Port Number The first port in the listener port range. Valid values:
0
to65535
.NOTE: This parameter is required when
ListenerPort
is set to0
.- status String
- The status of the resource. Valid values:
Running
,Stopped
. When you want to enable this instance, you can set the property value toRunning
; - Map<String>
- The tag of the resource
Import
NLB Listener can be imported using the id, e.g.
$ pulumi import alicloud:nlb/listener:Listener example <id>
To learn more about importing existing cloud resources, see Importing resources.
Package Details
- Repository
- Alibaba Cloud pulumi/pulumi-alicloud
- License
- Apache-2.0
- Notes
- This Pulumi package is based on the
alicloud
Terraform Provider.