Docs Home Pulumi IaC Pulumi ESC Pulumi Cloud Packages Tutorials
  1. Packages
  2. Alibaba Cloud Provider
  3. API Docs
  4. ecs
  5. EipAssociation
Alibaba Cloud v3.66.0 published on Friday, Nov 15, 2024 by Pulumi
pulumi/pulumi-alicloud

alicloud.ecs.EipAssociation

Explore with Pulumi AI

alicloud logo
Alibaba Cloud v3.66.0 published on Friday, Nov 15, 2024 by Pulumi
pulumi/pulumi-alicloud

    Provides a EIP Association resource.

    NOTE: alicloud.ecs.EipAssociation is useful in scenarios where EIPs are either pre-existing or distributed to customers or users and therefore cannot be changed.

    NOTE: From version 1.7.1, the resource support to associate EIP to SLB Instance or Nat Gateway.

    NOTE: One EIP can only be associated with ECS or SLB instance which in the VPC.

    For information about EIP Association and how to use it, see What is Association.

    NOTE: Available since v1.117.0.

    Example Usage

    Basic Usage

    import * as pulumi from "@pulumi/pulumi";
import * as alicloud from "@pulumi/alicloud";

const config = new pulumi.Config();
const name = config.get("name") || "tf-example";
const example = alicloud.getZones({
    availableResourceCreation: "Instance",
});
const exampleGetInstanceTypes = example.then(example => alicloud.ecs.getInstanceTypes({
    availabilityZone: example.zones?.[0]?.id,
    cpuCoreCount: 1,
    memorySize: 2,
}));
const exampleGetImages = alicloud.ecs.getImages({
    nameRegex: "^ubuntu_18.*64",
    owners: "system",
});
const exampleNetwork = new alicloud.vpc.Network("example", {
    vpcName: name,
    cidrBlock: "10.4.0.0/16",
});
const exampleSwitch = new alicloud.vpc.Switch("example", {
    vswitchName: name,
    cidrBlock: "10.4.0.0/24",
    vpcId: exampleNetwork.id,
    zoneId: example.then(example => example.zones?.[0]?.id),
});
const exampleSecurityGroup = new alicloud.ecs.SecurityGroup("example", {
    name: name,
    vpcId: exampleNetwork.id,
});
const exampleInstance = new alicloud.ecs.Instance("example", {
    availabilityZone: example.then(example => example.zones?.[0]?.id),
    instanceName: name,
    imageId: exampleGetImages.then(exampleGetImages => exampleGetImages.images?.[0]?.id),
    instanceType: exampleGetInstanceTypes.then(exampleGetInstanceTypes => exampleGetInstanceTypes.instanceTypes?.[0]?.id),
    securityGroups: [exampleSecurityGroup.id],
    vswitchId: exampleSwitch.id,
    tags: {
        Created: "TF",
        For: "example",
    },
});
const exampleEipAddress = new alicloud.ecs.EipAddress("example", {addressName: name});
const exampleEipAssociation = new alicloud.ecs.EipAssociation("example", {
    allocationId: exampleEipAddress.id,
    instanceId: exampleInstance.id,
});

    import pulumi
import pulumi_alicloud as alicloud

config = pulumi.Config()
name = config.get("name")
if name is None:
    name = "tf-example"
example = alicloud.get_zones(available_resource_creation="Instance")
example_get_instance_types = alicloud.ecs.get_instance_types(availability_zone=example.zones[0].id,
    cpu_core_count=1,
    memory_size=2)
example_get_images = alicloud.ecs.get_images(name_regex="^ubuntu_18.*64",
    owners="system")
example_network = alicloud.vpc.Network("example",
    vpc_name=name,
    cidr_block="10.4.0.0/16")
example_switch = alicloud.vpc.Switch("example",
    vswitch_name=name,
    cidr_block="10.4.0.0/24",
    vpc_id=example_network.id,
    zone_id=example.zones[0].id)
example_security_group = alicloud.ecs.SecurityGroup("example",
    name=name,
    vpc_id=example_network.id)
example_instance = alicloud.ecs.Instance("example",
    availability_zone=example.zones[0].id,
    instance_name=name,
    image_id=example_get_images.images[0].id,
    instance_type=example_get_instance_types.instance_types[0].id,
    security_groups=[example_security_group.id],
    vswitch_id=example_switch.id,
    tags={
        "Created": "TF",
        "For": "example",
    })
example_eip_address = alicloud.ecs.EipAddress("example", address_name=name)
example_eip_association = alicloud.ecs.EipAssociation("example",
    allocation_id=example_eip_address.id,
    instance_id=example_instance.id)

    package main

import (
	"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud"
	"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/ecs"
	"github.com/pulumi/pulumi-alicloud/sdk/v3/go/alicloud/vpc"
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi/config"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		cfg := config.New(ctx, "")
		name := "tf-example"
		if param := cfg.Get("name"); param != "" {
			name = param
		}
		example, err := alicloud.GetZones(ctx, &alicloud.GetZonesArgs{
			AvailableResourceCreation: pulumi.StringRef("Instance"),
		}, nil)
		if err != nil {
			return err
		}
		exampleGetInstanceTypes, err := ecs.GetInstanceTypes(ctx, &ecs.GetInstanceTypesArgs{
			AvailabilityZone: pulumi.StringRef(example.Zones[0].Id),
			CpuCoreCount:     pulumi.IntRef(1),
			MemorySize:       pulumi.Float64Ref(2),
		}, nil)
		if err != nil {
			return err
		}
		exampleGetImages, err := ecs.GetImages(ctx, &ecs.GetImagesArgs{
			NameRegex: pulumi.StringRef("^ubuntu_18.*64"),
			Owners:    pulumi.StringRef("system"),
		}, nil)
		if err != nil {
			return err
		}
		exampleNetwork, err := vpc.NewNetwork(ctx, "example", &vpc.NetworkArgs{
			VpcName:   pulumi.String(name),
			CidrBlock: pulumi.String("10.4.0.0/16"),
		})
		if err != nil {
			return err
		}
		exampleSwitch, err := vpc.NewSwitch(ctx, "example", &vpc.SwitchArgs{
			VswitchName: pulumi.String(name),
			CidrBlock:   pulumi.String("10.4.0.0/24"),
			VpcId:       exampleNetwork.ID(),
			ZoneId:      pulumi.String(example.Zones[0].Id),
		})
		if err != nil {
			return err
		}
		exampleSecurityGroup, err := ecs.NewSecurityGroup(ctx, "example", &ecs.SecurityGroupArgs{
			Name:  pulumi.String(name),
			VpcId: exampleNetwork.ID(),
		})
		if err != nil {
			return err
		}
		exampleInstance, err := ecs.NewInstance(ctx, "example", &ecs.InstanceArgs{
			AvailabilityZone: pulumi.String(example.Zones[0].Id),
			InstanceName:     pulumi.String(name),
			ImageId:          pulumi.String(exampleGetImages.Images[0].Id),
			InstanceType:     pulumi.String(exampleGetInstanceTypes.InstanceTypes[0].Id),
			SecurityGroups: pulumi.StringArray{
				exampleSecurityGroup.ID(),
			},
			VswitchId: exampleSwitch.ID(),
			Tags: pulumi.StringMap{
				"Created": pulumi.String("TF"),
				"For":     pulumi.String("example"),
			},
		})
		if err != nil {
			return err
		}
		exampleEipAddress, err := ecs.NewEipAddress(ctx, "example", &ecs.EipAddressArgs{
			AddressName: pulumi.String(name),
		})
		if err != nil {
			return err
		}
		_, err = ecs.NewEipAssociation(ctx, "example", &ecs.EipAssociationArgs{
			AllocationId: exampleEipAddress.ID(),
			InstanceId:   exampleInstance.ID(),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

    using System.Collections.Generic;
using System.Linq;
using Pulumi;
using AliCloud = Pulumi.AliCloud;

return await Deployment.RunAsync(() => 
{
    var config = new Config();
    var name = config.Get("name") ?? "tf-example";
    var example = AliCloud.GetZones.Invoke(new()
    {
        AvailableResourceCreation = "Instance",
    });

    var exampleGetInstanceTypes = AliCloud.Ecs.GetInstanceTypes.Invoke(new()
    {
        AvailabilityZone = example.Apply(getZonesResult => getZonesResult.Zones[0]?.Id),
        CpuCoreCount = 1,
        MemorySize = 2,
    });

    var exampleGetImages = AliCloud.Ecs.GetImages.Invoke(new()
    {
        NameRegex = "^ubuntu_18.*64",
        Owners = "system",
    });

    var exampleNetwork = new AliCloud.Vpc.Network("example", new()
    {
        VpcName = name,
        CidrBlock = "10.4.0.0/16",
    });

    var exampleSwitch = new AliCloud.Vpc.Switch("example", new()
    {
        VswitchName = name,
        CidrBlock = "10.4.0.0/24",
        VpcId = exampleNetwork.Id,
        ZoneId = example.Apply(getZonesResult => getZonesResult.Zones[0]?.Id),
    });

    var exampleSecurityGroup = new AliCloud.Ecs.SecurityGroup("example", new()
    {
        Name = name,
        VpcId = exampleNetwork.Id,
    });

    var exampleInstance = new AliCloud.Ecs.Instance("example", new()
    {
        AvailabilityZone = example.Apply(getZonesResult => getZonesResult.Zones[0]?.Id),
        InstanceName = name,
        ImageId = exampleGetImages.Apply(getImagesResult => getImagesResult.Images[0]?.Id),
        InstanceType = exampleGetInstanceTypes.Apply(getInstanceTypesResult => getInstanceTypesResult.InstanceTypes[0]?.Id),
        SecurityGroups = new[]
        {
            exampleSecurityGroup.Id,
        },
        VswitchId = exampleSwitch.Id,
        Tags = 
        {
            { "Created", "TF" },
            { "For", "example" },
        },
    });

    var exampleEipAddress = new AliCloud.Ecs.EipAddress("example", new()
    {
        AddressName = name,
    });

    var exampleEipAssociation = new AliCloud.Ecs.EipAssociation("example", new()
    {
        AllocationId = exampleEipAddress.Id,
        InstanceId = exampleInstance.Id,
    });

});

    package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.alicloud.AlicloudFunctions;
import com.pulumi.alicloud.inputs.GetZonesArgs;
import com.pulumi.alicloud.ecs.EcsFunctions;
import com.pulumi.alicloud.ecs.inputs.GetInstanceTypesArgs;
import com.pulumi.alicloud.ecs.inputs.GetImagesArgs;
import com.pulumi.alicloud.vpc.Network;
import com.pulumi.alicloud.vpc.NetworkArgs;
import com.pulumi.alicloud.vpc.Switch;
import com.pulumi.alicloud.vpc.SwitchArgs;
import com.pulumi.alicloud.ecs.SecurityGroup;
import com.pulumi.alicloud.ecs.SecurityGroupArgs;
import com.pulumi.alicloud.ecs.Instance;
import com.pulumi.alicloud.ecs.InstanceArgs;
import com.pulumi.alicloud.ecs.EipAddress;
import com.pulumi.alicloud.ecs.EipAddressArgs;
import com.pulumi.alicloud.ecs.EipAssociation;
import com.pulumi.alicloud.ecs.EipAssociationArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
        final var config = ctx.config();
        final var name = config.get("name").orElse("tf-example");
        final var example = AlicloudFunctions.getZones(GetZonesArgs.builder()
            .availableResourceCreation("Instance")
            .build());

        final var exampleGetInstanceTypes = EcsFunctions.getInstanceTypes(GetInstanceTypesArgs.builder()
            .availabilityZone(example.applyValue(getZonesResult -> getZonesResult.zones()[0].id()))
            .cpuCoreCount(1)
            .memorySize(2)
            .build());

        final var exampleGetImages = EcsFunctions.getImages(GetImagesArgs.builder()
            .nameRegex("^ubuntu_18.*64")
            .owners("system")
            .build());

        var exampleNetwork = new Network("exampleNetwork", NetworkArgs.builder()
            .vpcName(name)
            .cidrBlock("10.4.0.0/16")
            .build());

        var exampleSwitch = new Switch("exampleSwitch", SwitchArgs.builder()
            .vswitchName(name)
            .cidrBlock("10.4.0.0/24")
            .vpcId(exampleNetwork.id())
            .zoneId(example.applyValue(getZonesResult -> getZonesResult.zones()[0].id()))
            .build());

        var exampleSecurityGroup = new SecurityGroup("exampleSecurityGroup", SecurityGroupArgs.builder()
            .name(name)
            .vpcId(exampleNetwork.id())
            .build());

        var exampleInstance = new Instance("exampleInstance", InstanceArgs.builder()
            .availabilityZone(example.applyValue(getZonesResult -> getZonesResult.zones()[0].id()))
            .instanceName(name)
            .imageId(exampleGetImages.applyValue(getImagesResult -> getImagesResult.images()[0].id()))
            .instanceType(exampleGetInstanceTypes.applyValue(getInstanceTypesResult -> getInstanceTypesResult.instanceTypes()[0].id()))
            .securityGroups(exampleSecurityGroup.id())
            .vswitchId(exampleSwitch.id())
            .tags(Map.ofEntries(
                Map.entry("Created", "TF"),
                Map.entry("For", "example")
            ))
            .build());

        var exampleEipAddress = new EipAddress("exampleEipAddress", EipAddressArgs.builder()
            .addressName(name)
            .build());

        var exampleEipAssociation = new EipAssociation("exampleEipAssociation", EipAssociationArgs.builder()
            .allocationId(exampleEipAddress.id())
            .instanceId(exampleInstance.id())
            .build());

    }
}

    configuration:
  name:
    type: string
    default: tf-example
resources:
  exampleNetwork:
    type: alicloud:vpc:Network
    name: example
    properties:
      vpcName: ${name}
      cidrBlock: 10.4.0.0/16
  exampleSwitch:
    type: alicloud:vpc:Switch
    name: example
    properties:
      vswitchName: ${name}
      cidrBlock: 10.4.0.0/24
      vpcId: ${exampleNetwork.id}
      zoneId: ${example.zones[0].id}
  exampleSecurityGroup:
    type: alicloud:ecs:SecurityGroup
    name: example
    properties:
      name: ${name}
      vpcId: ${exampleNetwork.id}
  exampleInstance:
    type: alicloud:ecs:Instance
    name: example
    properties:
      availabilityZone: ${example.zones[0].id}
      instanceName: ${name}
      imageId: ${exampleGetImages.images[0].id}
      instanceType: ${exampleGetInstanceTypes.instanceTypes[0].id}
      securityGroups:
        - ${exampleSecurityGroup.id}
      vswitchId: ${exampleSwitch.id}
      tags:
        Created: TF
        For: example
  exampleEipAddress:
    type: alicloud:ecs:EipAddress
    name: example
    properties:
      addressName: ${name}
  exampleEipAssociation:
    type: alicloud:ecs:EipAssociation
    name: example
    properties:
      allocationId: ${exampleEipAddress.id}
      instanceId: ${exampleInstance.id}
variables:
  example:
    fn::invoke:
      Function: alicloud:getZones
      Arguments:
        availableResourceCreation: Instance
  exampleGetInstanceTypes:
    fn::invoke:
      Function: alicloud:ecs:getInstanceTypes
      Arguments:
        availabilityZone: ${example.zones[0].id}
        cpuCoreCount: 1
        memorySize: 2
  exampleGetImages:
    fn::invoke:
      Function: alicloud:ecs:getImages
      Arguments:
        nameRegex: ^ubuntu_18.*64
        owners: system

    Create EipAssociation Resource

    Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

    Constructor syntax

    new EipAssociation(name: string, args: EipAssociationArgs, opts?: CustomResourceOptions);
    @overload
def EipAssociation(resource_name: str,
                   args: EipAssociationArgs,
                   opts: Optional[ResourceOptions] = None)

@overload
def EipAssociation(resource_name: str,
                   opts: Optional[ResourceOptions] = None,
                   allocation_id: Optional[str] = None,
                   instance_id: Optional[str] = None,
                   force: Optional[bool] = None,
                   instance_type: Optional[str] = None,
                   mode: Optional[str] = None,
                   private_ip_address: Optional[str] = None,
                   vpc_id: Optional[str] = None)
    func NewEipAssociation(ctx *Context, name string, args EipAssociationArgs, opts ...ResourceOption) (*EipAssociation, error)
    public EipAssociation(string name, EipAssociationArgs args, CustomResourceOptions? opts = null)
    public EipAssociation(String name, EipAssociationArgs args)
public EipAssociation(String name, EipAssociationArgs args, CustomResourceOptions options)

    type: alicloud:ecs:EipAssociation
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

    Parameters

    name string
    The unique name of the resource.
    args EipAssociationArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    resource_name str
    The unique name of the resource.
    args EipAssociationArgs
    The arguments to resource properties.
    opts ResourceOptions
    Bag of options to control resource's behavior.
    ctx Context
    Context object for the current deployment.
    name string
    The unique name of the resource.
    args EipAssociationArgs
    The arguments to resource properties.
    opts ResourceOption
    Bag of options to control resource's behavior.
    name string
    The unique name of the resource.
    args EipAssociationArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    name String
    The unique name of the resource.
    args EipAssociationArgs
    The arguments to resource properties.
    options CustomResourceOptions
    Bag of options to control resource's behavior.

    Constructor example

    The following reference example uses placeholder values for all input properties.

    var eipAssociationResource = new AliCloud.Ecs.EipAssociation("eipAssociationResource", new()
{
    AllocationId = "string",
    InstanceId = "string",
    Force = false,
    InstanceType = "string",
    Mode = "string",
    PrivateIpAddress = "string",
    VpcId = "string",
});

    example, err := ecs.NewEipAssociation(ctx, "eipAssociationResource", &ecs.EipAssociationArgs{
	AllocationId:     pulumi.String("string"),
	InstanceId:       pulumi.String("string"),
	Force:            pulumi.Bool(false),
	InstanceType:     pulumi.String("string"),
	Mode:             pulumi.String("string"),
	PrivateIpAddress: pulumi.String("string"),
	VpcId:            pulumi.String("string"),
})

    var eipAssociationResource = new EipAssociation("eipAssociationResource", EipAssociationArgs.builder()
    .allocationId("string")
    .instanceId("string")
    .force(false)
    .instanceType("string")
    .mode("string")
    .privateIpAddress("string")
    .vpcId("string")
    .build());

    eip_association_resource = alicloud.ecs.EipAssociation("eipAssociationResource",
    allocation_id="string",
    instance_id="string",
    force=False,
    instance_type="string",
    mode="string",
    private_ip_address="string",
    vpc_id="string")

    const eipAssociationResource = new alicloud.ecs.EipAssociation("eipAssociationResource", {
    allocationId: "string",
    instanceId: "string",
    force: false,
    instanceType: "string",
    mode: "string",
    privateIpAddress: "string",
    vpcId: "string",
});

    type: alicloud:ecs:EipAssociation
properties:
    allocationId: string
    force: false
    instanceId: string
    instanceType: string
    mode: string
    privateIpAddress: string
    vpcId: string

    EipAssociation Resource Properties

    To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

    Inputs

    In Python, inputs that are objects can be passed either as argument classes or as dictionary literals.

    The EipAssociation resource accepts the following input properties:

    AllocationId string
    The ID of the EIP instance.
    InstanceId string
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    Force bool
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    InstanceType string

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    Mode string

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    PrivateIpAddress string

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    VpcId string

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    AllocationId string
    The ID of the EIP instance.
    InstanceId string
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    Force bool
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    InstanceType string

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    Mode string

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    PrivateIpAddress string

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    VpcId string

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    allocationId String
    The ID of the EIP instance.
    instanceId String
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    force Boolean
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    instanceType String

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    mode String

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    privateIpAddress String

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    vpcId String

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    allocationId string
    The ID of the EIP instance.
    instanceId string
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    force boolean
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    instanceType string

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    mode string

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    privateIpAddress string

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    vpcId string

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    allocation_id str
    The ID of the EIP instance.
    instance_id str
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    force bool
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    instance_type str

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    mode str

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    private_ip_address str

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    vpc_id str

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    allocationId String
    The ID of the EIP instance.
    instanceId String
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    force Boolean
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    instanceType String

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    mode String

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    privateIpAddress String

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    vpcId String

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    Outputs

    All input properties are implicitly available as output properties. Additionally, the EipAssociation resource produces the following output properties:

    Id string
    The provider-assigned unique ID for this managed resource.
    Id string
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.
    id string
    The provider-assigned unique ID for this managed resource.
    id str
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.

    Look up Existing EipAssociation Resource

    Get an existing EipAssociation resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

    public static get(name: string, id: Input<ID>, state?: EipAssociationState, opts?: CustomResourceOptions): EipAssociation
    @staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        allocation_id: Optional[str] = None,
        force: Optional[bool] = None,
        instance_id: Optional[str] = None,
        instance_type: Optional[str] = None,
        mode: Optional[str] = None,
        private_ip_address: Optional[str] = None,
        vpc_id: Optional[str] = None) -> EipAssociation
    func GetEipAssociation(ctx *Context, name string, id IDInput, state *EipAssociationState, opts ...ResourceOption) (*EipAssociation, error)
    public static EipAssociation Get(string name, Input<string> id, EipAssociationState? state, CustomResourceOptions? opts = null)
    public static EipAssociation get(String name, Output<String> id, EipAssociationState state, CustomResourceOptions options)
    Resource lookup is not supported in YAML
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    resource_name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    The following state arguments are supported:
    AllocationId string
    The ID of the EIP instance.
    Force bool
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    InstanceId string
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    InstanceType string

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    Mode string

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    PrivateIpAddress string

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    VpcId string

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    AllocationId string
    The ID of the EIP instance.
    Force bool
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    InstanceId string
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    InstanceType string

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    Mode string

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    PrivateIpAddress string

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    VpcId string

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    allocationId String
    The ID of the EIP instance.
    force Boolean
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    instanceId String
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    instanceType String

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    mode String

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    privateIpAddress String

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    vpcId String

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    allocationId string
    The ID of the EIP instance.
    force boolean
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    instanceId string
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    instanceType string

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    mode string

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    privateIpAddress string

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    vpcId string

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    allocation_id str
    The ID of the EIP instance.
    force bool
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    instance_id str
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    instance_type str

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    mode str

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    private_ip_address str

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    vpc_id str

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    allocationId String
    The ID of the EIP instance.
    force Boolean
    Specifies whether to disassociate the EIP from a NAT gateway if a DNAT or SNAT entry is added to the NAT gateway. Valid values:
    instanceId String
    The ID of the instance with which you want to associate the EIP. You can enter the ID of a NAT gateway, CLB instance, ECS instance, secondary ENI, HAVIP, or IP address.
    instanceType String

    The type of the instance with which you want to associate the EIP. Valid values:

    • Nat: NAT gateway
    • SlbInstance: CLB instance
    • EcsInstance (default): ECS instance
    • NetworkInterface: secondary ENI
    • HaVip: HAVIP
    • IpAddress: IP address

    NOTE: The default value is EcsInstance. If the instance with which you want to associate the EIP is not an ECS instance, this parameter is required.

    mode String

    The association mode. Valid values:

    • NAT (default): NAT mode
    • MULTI_BINDED: multi-EIP-to-ENI mode
    • BINDED: cut-network interface controller mode

    NOTE: This parameter is required only when instance_type is set to NetworkInterface.

    privateIpAddress String

    The IP address in the CIDR block of the vSwitch.

    If you leave this parameter empty, the system allocates a private IP address based on the VPC ID and vSwitch ID.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    vpcId String

    The ID of the VPC in which an IPv4 gateway is created. The VPC and the EIP must be in the same region.

    When you associate an EIP with an IP address, the system can enable the IP address to access the Internet based on VPC route configurations.

    NOTE: This parameter is required if instance_type is set to IpAddress, which indicates that the EIP is to be associated with an IP address.

    Import

    EIP Association can be imported using the id, e.g.

    $ pulumi import alicloud:ecs/eipAssociation:EipAssociation example <allocation_id>:<instance_id>

    To learn more about importing existing cloud resources, see Importing resources.

    Package Details

    Repository
    Alibaba Cloud pulumi/pulumi-alicloud
    License
    Apache-2.0
    Notes
    This Pulumi package is based on the alicloud Terraform Provider.
    alicloud logo
    Alibaba Cloud v3.66.0 published on Friday, Nov 15, 2024 by Pulumi
    pulumi/pulumi-alicloud